Related
Hello all,
I just re-constructed a CHT ROM for backup before cooking. But the kaiser brick after flash the ROM.
WM6 simple not boot. It start with "smart mobility" image then white screen and black. Won't boot to WM6....
I tried use mtty.exe to connect but it said USB cannot open.....
Pls help.
thanks.
kfluk
kfluk said:
Hello all,
I just re-constructed a CHT ROM for backup before cooking. But the kaiser brick after flash the ROM.
WM6 simple not boot. It start with "smart mobility" image then white screen and black. Won't boot to WM6....
I tried use mtty.exe to connect but it said USB cannot open.....
Pls help.
thanks.
kfluk
Click to expand...
Click to collapse
Do you flash the one i send you, or the one you made?
Anyway, put the Kaiser in bootloader mode (you have HardSPL ), and flash WWE ROM you can find in Austinsync sticky thread.
Cheers.
jcespi2005 said:
Do you flash the one i send you, or the one you made?
Anyway, put the Kaiser in bootloader mode (you have HardSPL ), and flash WWE ROM you can find in Austinsync sticky thread.
Cheers.
Click to expand...
Click to collapse
Just found out how to enter bootloader mode.
Both of our ROM I tried to flash. Result is the same.
It seem I am out of luck...
kfluk
Hello jcespi2005,
I flash WWE Cooked ROM and it work fine. I hope Tadzio figure out a way to make CHT ROM work.
Do you think is there something wrong with ROM re-construction the procedure?
kfluk
kfluk said:
Hello jcespi2005,
I flash WWE Cooked ROM and it work fine. I hope Tadzio figure out a way to make CHT ROM work.
Do you think is there something wrong with ROM re-construction the procedure?
kfluk
Click to expand...
Click to collapse
Glad to hear you are on the road again
I'll take down the link to CHT reconstructed ROM for now.
I don't beleave related with the procedure, cause i used to reconstruct the spanish Kaiser ROM, and someone in the thread post about other successfully reconstructed ROM, so perhaps is related to part02.raw itself, but don't know. I sent a message to Tadzio, waiting the answer.
Cheers.
jcespi2005 said:
Glad to hear you are on the road again
I'll take down the link to CHT reconstructed ROM for now.
I don't beleave related with the procedure, cause i used to reconstruct the spanish Kaiser ROM, and someone in the thread post about other successfully reconstructed ROM, so perhaps is related to part02.raw itself, but don't know. I sent a message to Tadzio, waiting the answer.
Cheers.
Click to expand...
Click to collapse
Side track, I found custom method to make WWE OS display CHT lang. Not work well with hardware keyboard. Some of key does not work well.
It cause me have more urgency to return CHT ROM....
kfluk said:
Side track, I found custom method to make WWE OS display CHT lang. Not work well with hardware keyboard. Some of key does not work well.
It cause me have more urgency to return CHT ROM....
Click to expand...
Click to collapse
I don't know whether this can help you to solve the keyboard problem.
Some Registry key from my tytn II:
\HKCU\keyboard layout\Preload Default - "e0010404"
\HKCU\keyboard layout\Preload\1 Default - "e0010404"
\HKCU\keyboard layout\Preload\2 Default - "e0020404"
Hope it may help U!
kekekaka said:
I don't know whether this can help you to solve the keyboard problem.
Some Registry key from my tytn II:
\HKCU\keyboard layout\Preload Default - "e0010404"
\HKCU\keyboard layout\Preload\1 Default - "e0010404"
\HKCU\keyboard layout\Preload\2 Default - "e0020404"
Hope it may help U!
Click to expand...
Click to collapse
hello,
I guess this is preload keyboard layout but not key mapping. I need this for another purpose too. thanks.
For key mapping, it looks like exist at HKLM\HARDWARE\DEVICEMAP\KEYBD
kfluk
kekekaka said:
I don't know whether this can help you to solve the keyboard problem.
Some Registry key from my tytn II:
\HKCU\keyboard layout\Preload Default - "e0010404"
\HKCU\keyboard layout\Preload\1 Default - "e0010404"
\HKCU\keyboard layout\Preload\2 Default - "e0020404"
Hope it may help U!
Click to expand...
Click to collapse
Can you attach your sym.0404.txt file? you can find in \windows
With this file i can make a CAB...
jcespi2005 said:
Can you attach your sym.0404.txt file? you can find in \windows
With this file i can make a CAB...
Click to expand...
Click to collapse
There is no sym.0404.txt file!
There is only sympad0404.txt!
Anyway, I upload it to you first!
kekekaka said:
There is no sym.0404.txt file!
There is only sympad0404.txt!
Anyway, I upload it to you first!
Click to expand...
Click to collapse
Yes, i view this in the dump folder.
Strange, seems Dopod ROM don't use the same method for the keybd.
Anyway, i attach the CAB to see if works for kfluk in the WWE ROM.
Good luck, i hope.
jcespi2005 said:
Yes, i view this in the dump folder.
Strange, seems Dopod ROM don't use the same method for the keybd.
Anyway, i attach the CAB to see if works for kfluk in the WWE ROM.
Good luck, i hope.
Click to expand...
Click to collapse
Hello jcespi2005,
Before and after install, it seems the same. (I am now use Helmi_Kaiser_1.57.00.03_AKU.0.7.0.Cooked_clean+bigstorage.exe"
no luck until now. Chinese Keyboard has a button call "switch input". This button now mapped to "Tab".
For other button has the following error. (all button said press Fn)
A = _ (original is Tab)
S = " (original is _)
Switch Input = Tab
All other button is ok.
Will switch to other ROM. WWE ROM seems not fit my hardware. Feeling is strange.
** Update: The Switch Input button may be no problem in mapping. I found this button work in word prediction. Just different function in WWE and CHT ROM.
kfluk
kfluk said:
Hello all,
I just re-constructed a CHT ROM for backup before cooking. But the kaiser brick after flash the ROM.
WM6 simple not boot. It start with "smart mobility" image then white screen and black. Won't boot to WM6....
I tried use mtty.exe to connect but it said USB cannot open.....
Pls help.
thanks.
kfluk
Click to expand...
Click to collapse
hello kfluk and all guys in this thread!
glad to see someone studying the Chinese ROM
coz i had tried to cook the ROM with English UI that supports chs/cht,but failed.the result was the same as kfluk's.just froze at the smart mobility screen.
i guess ive taken the wrong way to modify the .hv file.
but my kaiser with hspl wasnt bricked and came back to life.
try this method to flash your device again:
1,connect your device with computer using usb cable
2,boot your device,give it some seconds when you see the smart mobility screen and some red words at the right bottom
3.run the KaiserCustomRUUv1.exe(of cause there would be one .nbh os file near it in order to flash into your kaiser),click all "NEXT" you can until it says "verifying the information on your ...."
4.camera+power+reset hold
in this way i flash my rom as normal,hope that could help you.
about the CHT keyboard mapping problem
just need to modify some key in registry [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
change"CurLang" to 404 (Hex)
if you see a dword named "CWSLayout",del it or change it to"0"
then soft-reset
i make a cab to you,too transfer to your device and run it->soft-reset
after that i think the letters are now assigned to the right key buttons
REGARDS
Sheng
woohyuksheng said:
hello kfluk and all guys in this thread!
glad to see someone studying the Chinese ROM
coz i had tried to cook the ROM with English UI that supports chs/cht,but failed.the result was the same as kfluk's.just froze at the smart mobility screen.
i guess ive taken the wrong way to modify the .hv file.
but my kaiser with hspl wasnt bricked and came back to life.
try this method to flash your device again:
1,connect your device with computer using usb cable
2,boot your device,give it some seconds when you see the smart mobility screen and some red words at the right bottom
3.run the KaiserCustomRUUv1.exe(of cause there would be one .nbh os file near it in order to flash into your kaiser),click all "NEXT" you can until it says "verifying the information on your ...."
4.camera+power+reset hold
in this way i flash my rom as normal,hope that could help you.
about the CHT keyboard mapping problem
just need to modify some key in registry [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
change"CurLang" to 404 (Hex)
if you see a dword named "CWSLayout",del it or change it to"0"
then soft-reset
i make a cab to you,too transfer to your device and run it->soft-reset
after that i think the letters are now assigned to the right key buttons
REGARDS
Sheng
Click to expand...
Click to collapse
Brick was solved. I just don't know how to enter boot loader mode before.
Thanks for keyboard registry, I will apply it to test.
btw, I found if modify registry key HKLM\MUI change SysLang from 404 to 409 and HKLM\nls change SystemLCID from 404 to 409.
Result will make WM6 can display Chinese and use default English font.
Since apply Chinese font and input to WWE kaiser will cause it use ugly font display english. Furthermore, it cause some menu not display properly too.
the above registry fix it. I found and apply yesterday night and result is good. No side effect until now.
kfluk
woohyuksheng said:
hello kfluk and all guys in this thread!
glad to see someone studying the Chinese ROM
coz i had tried to cook the ROM with English UI that supports chs/cht,but failed.the result was the same as kfluk's.just froze at the smart mobility screen.
i guess ive taken the wrong way to modify the .hv file.
but my kaiser with hspl wasnt bricked and came back to life.
try this method to flash your device again:
1,connect your device with computer using usb cable
2,boot your device,give it some seconds when you see the smart mobility screen and some red words at the right bottom
3.run the KaiserCustomRUUv1.exe(of cause there would be one .nbh os file near it in order to flash into your kaiser),click all "NEXT" you can until it says "verifying the information on your ...."
4.camera+power+reset hold
in this way i flash my rom as normal,hope that could help you.
about the CHT keyboard mapping problem
just need to modify some key in registry [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
change"CurLang" to 404 (Hex)
if you see a dword named "CWSLayout",del it or change it to"0"
then soft-reset
i make a cab to you,too transfer to your device and run it->soft-reset
after that i think the letters are now assigned to the right key buttons
REGARDS
Sheng
Click to expand...
Click to collapse
I modified the key manually. It's work. Can you tell me any tools to create cab or modify ROM package? thanks.
kfluk said:
I modified the key manually. It's work. Can you tell me any tools to create cab or modify ROM package? thanks.
Click to expand...
Click to collapse
For CAB manage, you can use WinCE CAB Manger from http://www.ocpsoftware.com/ and for modify the ROM packages, every package ussually have a .RGU text file with the registry entrys, so you can edit with notepad.
To create packages in this thread you have a little guide...
http://forum.xda-developers.com/showthread.php?t=303195
Cheers.
jcespi2005 said:
For CAB manage, you can use WinCE CAB Manger from http://www.ocpsoftware.com/ and for modify the ROM packages, every package ussually have a .RGU text file with the registry entrys, so you can edit with notepad.
To create packages in this thread you have a little guide...
http://forum.xda-developers.com/showthread.php?t=303195
Cheers.
Click to expand...
Click to collapse
hello jcespi2005,
thanks again for your information. Once HK English ROM available. I will work on it first. Also continue seek for CHT ROM issue solution.
I found voice recognizer in CHT ROM is much better than WWE. Since it does not require training and able to use immediately.
kfluk
Hi all,
has anyone tried this one already ?
Link
It seems to add some functionality to the Notification Manager (like turning on/off WiFi, for example). But I'm afraid it will not install, because we have the new Notification Manager already.
What do you say ?
Regards,
Marcos
Tried without success. Installation failed without any explanations.
Try with this one http://forum.xda-developers.com/attachment.php?attachmentid=178262&d=1240211769
I installed and works fine on my D2
Stdu
thanks. works great.
Excellent!
Thank you!
It's nice but I'm missing the different snooze options I had before (with this registry hack: http://forum.xda-developers.com/showpost.php?p=3726469&postcount=10)
very good! thx~~
stdu said:
Try with this one http://forum.xda-developers.com/attachment.php?attachmentid=178262&d=1240211769
I installed and works fine on my D2
Stdu
Click to expand...
Click to collapse
Installed. Works well like this one in Shaks Topaz ROM for Diamond. Thank you.
Could any post a pic over what it does ?
Hi PhFr,
Attached you see what it does. Unfortunately it does not show "Battery" in front of the line. Does anyone have a solution for this?
Thanks and regards,
JTGBDR
stdu said:
Try with this one http://forum.xda-developers.com/attachment.php?attachmentid=178262&d=1240211769
I installed and works fine on my D2
Stdu
Click to expand...
Click to collapse
This one works. Thanks for it. Will come in handy and i can quickly access battery stats and Comm Man now.
Sidenote - I did get the old WM bubble notifications after the first reset but after soft reseting manually it worked.
jtgbdr said:
Hi PhFr,
Attached you see what it does. Unfortunately it does not show "Battery" in front of the line. Does anyone have a solution for this?
Thanks and regards,
JTGBDR
Click to expand...
Click to collapse
Thank you m8
stdu said:
Try with this one http://forum.xda-developers.com/attachment.php?attachmentid=178262&d=1240211769
I installed and works fine on my D2
Stdu
Click to expand...
Click to collapse
Yeah worked fine, thanks.
PhFr said:
Thank you m8
Click to expand...
Click to collapse
Is there a solution for this?
I'd like to have it say "Battery" aswell...
I'd really like to see the battery word + icon on the notification manager to access its setting quickly (insted of settings tab - show all - system - battery...) any news or solution for the missing word? is it stable, and worth a try? please note that I have a touch pro 2.. thanks a lot for the info guys!
Works not on the MDA Vario V (T-Mobile branding)
cyberpunk627 said:
I'd really like to see the battery word + icon on the notification manager to access its setting quickly (insted of settings tab - show all - system - battery...) any news or solution for the missing word? is it stable, and worth a try? please note that I have a touch pro 2.. thanks a lot for the info guys!
Click to expand...
Click to collapse
eats a lot of ram
Does Enhanced Notification Manager works with MS Shell 3.0?
Cos I disable the TF3D and runing MS shell 3.0. When i installed this Enchanced Notification, nothing happens
Thanks
jtgbdr said:
Hi PhFr,
Attached you see what it does. Unfortunately it does not show "Battery" in front of the line. Does anyone have a solution for this?
Thanks and regards,
JTGBDR
Click to expand...
Click to collapse
Yes, there is a way to add the "Battery" string in front, but it requires you to edit a MUI file.
Let me explain:
When you install the distributed cab file it installs on your device various graphic files, plus 2 MUI files. These MUI files are for WWE devices. If your device is set to use other language as default (like mine which is set to work with Greek) then these two MUI files will be installed on your system, but they will be ignored, and the ENM will take it's strings from the original MUI that won't be overwritten by the installation.
There are two ways to get the "Battery" string showing.
The first way is to replace the original MUI files of NM with the new ones that the cab installs. This method arises another problem though: If you do so, the entire NM will be shown in WWE and NOT on your language. This means that you'll get the "Battery" string but all the other strings will be in English and not your language (e.g. Greek)
The second way is a little more tricky, but it has guaranteed results:
You just edit the original MUI file of your device to add the "Battery" string!
Since editing MUI files is tricky I'll post a quick guide on how to do it, but you may need to Google for it to get more details.
Everything will be done on your PC. You will need the following:
1. A MUI unsigner - Signer
2. A Resource Editor
3. The MUI file
I wish I had kept the links, but I only have the apps, so I can't tell you from where to get these apps. The MUI unsigner-signer I get it from these very forums (XDA). Use search to find it. For a resource editor I used XN Resource Editor
The MUI file you will get it from your device. Just browse your phone's Windows directory and copy NotificationManager.dll.XXXX.MUI file on your PC
The .XXXX.MUI part is actually the number of your language. For instance in my case I needed the NotificationManager.dll.0408.MUI which is the GREEK MUI file.
1.
Copy the MUI file on a short path on your PC, something like C:\Temp\MUI\
2.
Extract the MUI unSigner-Signer on the same path
3.
Run the MUI unsigner to unsign your MUI file
4.
Use the resource editor to edit the MUI file. Depending on the case you may need to add the string, or just edit it. We need to fill the string numbered 176.
If the string exists and it's empty just edit it to fill in the string of your desire. If it doesn't exists then create a new string and pay attention on the LANGUAGE selection upon the new string creation menu. It should be the same language as the rest strings on your file. Keep in mind that ALL resource editors will add 16 string in a row. That's normal, and it doesn't matter. Just use the create string command until you have a "176" value that you can edit. Once you edit the "176" String to say whatever you want it to say, save the file and exit Resource editor.
5.
Use MUI signer to sign your file
6.
Copy the modified MUI file somewhere on your device. Don't try to copy it directly on windows directory. The file is marked as "system" and windows won't let you overwrite it.
7.
Once you have copied the modified file on your device, use an application like Total Commander to do 2 tasks:
a. Backup the original file (by copying it somewhere) and
b. Replace the original file with the modified one.
8. Soft Reset your device and everything should be ok now!
PS:
By no way this is a complete guide on how to do it. It's just what I recall from the process I followed some time ago in order to do it myself.
Directions on how to use MUI unsigner-Signer you'll find on the thread that you'll get it.
PS2:
Be safe: KEEP A BACKUP OF YOUR ORIGINAL FILE FIRST!!!
PS3:
Have fun. If someone needs the Greek Translated MUI file PM me. I have also posted it on the ENM thread back at the time I created it...
EDIT: Here's the link of the Greek MUI file: http://forum.xda-developers.com/showpost.php?p=4039484&postcount=125
MUI Unsigner: http://forum.xda-developers.com/showthread.php?t=329160
MUI Signer: http://forum.xda-developers.com/showthread.php?t=306982
runing MS shell 3.0
Goondu said:
Does Enhanced Notification Manager works with MS Shell 3.0?
Cos I disable the TF3D and runing MS shell 3.0. When i installed this Enchanced Notification, nothing happens
Thanks
Click to expand...
Click to collapse
AM CURIOUS ABOUT IT TOO? - does it work with elf-htc touch -?
thxs
Hi everyone
A few days ago i bought a Samsung C6625 (Valencia). The thing that looked nice on it was the wizpro theme and i whanted to see if i can modify it.
I finaly found a few information about it, but still i dont know where to start
Is there anione here that could take these files and see what cand be done?
If there are other information needed i would gladly give them Just tell me what to do.
The atached archive contains the dll file i found reference to in the registry. AdvHomePlug.dll and the theme xml that lead me to the registry clsid key.
What sort of modifications ur looking at?
You can use resource hacker to extract and edit the images in AdvHomePlug.dll. Those are all the interface images including the leftbar menu and the main window, contacts, wmp, etc...
All images are in PNG Format. U can extract and replace. If it is theme colors its in the voda xml file. I dont see any digital signatures on the dll and mui files you posted, how did u transfer the files? normal copy or ROMExtractor?
If you didnt do normal copy these require digital signatures before copying back, search xda how to self sign apps. Also it helps if u app unlock ur phone.
I copied the file normaly using explorer. About the modifications... I`ve seen on other samsung models the same wizpro theme but with different arangement of tabs.
And i was thinking maybe there are some mods for this like with chome just asking i dont know
Franky32 said:
I copied the file normaly using explorer. About the modifications... I`ve seen on other samsung models the same wizpro theme but with different arangement of tabs.
And i was thinking maybe there are some mods for this like with chome just asking i dont know
Click to expand...
Click to collapse
I dont have the phone on me to check it, maybe tomorrow i can borrow it, I do however remember some regitry entries for playing with tabs, its been a while since i had this phone. check under HKCU\Software under mpharos or samsung.
I found those registry entries but i can only modify images for the theme. Are there any other registry entries where i can modify things like... plugins that show up, the order of those plugins, things like that?
Could you please dump the registry key HKCU\CLSID\{583AD178-223A-4bcd-AFBE-EBB50536F8BE}
for me?
I will help you with customizing the plugin!
frauhottelmann said:
Could you please dump the registry key HKCU\CLSID\{583AD178-223A-4bcd-AFBE-EBB50536F8BE}
for me?
I will help you with customizing the plugin!
Click to expand...
Click to collapse
That registry key just points to dll file.
Code:
[HKEY_CLASSES_ROOT\CLSID\{583AD178-223A-4bcd-AFBE-EBB50536F8BE}\InprocServer32]
@="AdvHomePlug.dll"
I have attached the whole Wizpro OEM package.
Is there some way tomake it available for 176x220 screen?
Spiaatie said:
That registry key just points to dll file.
Code:
[HKEY_CLASSES_ROOT\CLSID\{583AD178-223A-4bcd-AFBE-EBB50536F8BE}\InprocServer32]
@="AdvHomePlug.dll"
I have attached the whole Wizpro OEM package.
Click to expand...
Click to collapse
Would you please to let me know how to install the package into my BJ2??
Thanks
bb49986 said:
Would you please to let me know how to install the package into my BJ2??
Thanks
Click to expand...
Click to collapse
id like wizpro on bj2 as well.
bb49986 said:
Would you please to let me know how to install the package into my BJ2??
Thanks
Click to expand...
Click to collapse
Wizpro does not works on BJII - I have tried cooking it in ROM, but nothing happens - just a blank screen with background picture. Maybe some drivers are missing. Haven't figured it out yet.
Problems
I have a Samsung i637 phone.
I have problems with Wizpro. When I receive a sms, I can read the sms, but when I try to return to home page (wizpro), I can not see it.
After some minuts, the wizpro does not appear, and instead appear the message "Anything home screen theme was found".
I have unlock security in the phone.
I have changed to multimedia home screen, but I need use the Wizpro.
What could be cause this problem???
Hi. I am triyng wm 6.1 st on mcrsft device emulator and I would like to try samsung's C6625 original wizpro theme. I dwnld the package from previuos page and copy it both to ap data/home and /windows/. When I select touchwiz from settings/home screen(4), there is this error message "the layout U have selected cannot be loaded...etc... So, where is mistake? How to make it work?
Spiaatie said:
That registry key just points to dll file.
Code:
[HKEY_CLASSES_ROOT\CLSID\{583AD178-223A-4bcd-AFBE-EBB50536F8BE}\InprocServer32]
@="AdvHomePlug.dll"
I have attached the whole Wizpro OEM package.
Click to expand...
Click to collapse
can you or anyone else get me this reg and the .dll that goes with it? please.
HKCR\CLSID\{B89DCC0E-E871-4abc-9D2E-C35DB6008713}
from BlackJack
Code:
[HKEY_CLASSES_ROOT\CLSID\{B89DCC0E-E871-4abc-9D2E-C35DB6008713}]
@="Demo Plugin"
[HKEY_CLASSES_ROOT\CLSID\{B89DCC0E-E871-4abc-9D2E-C35DB6008713}\InProcServer32]
@="\\Windows\\uGoPlugin.dll"
EDIT: Okay, I found the solution myself
Once again, for every HD2 User...MTP is working fine on the HD2, here´s how to set it up:
1. Install MTP
2. Turn off Sense (otherwise you won't be able to perform step 3).
2. install MTP Apple Icon.zip (if you want to have the apple icon instead of the silver windows one...i made a *.cab here)
3. Under \windows delete the file ManilaFull.xml.
4. With a registry editor, delete the key \HKLM\Software\HTC\Manila\Configuration.
5. Activate Sense and reorder your tabs (by deleting xml and reg key you'll revert to default order).
Have fun, I´m using it with calendar+...good alternative
Screenshots plzzz........
mughal90 said:
Screenshots plzzz........
Click to expand...
Click to collapse
Clicking the MTP link in the first post will give an idea of how it looks.
brooon said:
EDIT: Okay, I found the solution myself
Once again, for every HD2 User...MTP is working fine on the HD2, here´s how to set it up:
1. Install MTP
2. Turn off Sense (otherwise you won't be able to perform step 3).
2. install MTP Apple Icon.zip (if you want to have the apple icon instead of the silver windows one...i made a *.cab here)
3. Under \windows delete the file ManilaFull.xml.
4. With a registry editor, delete the key \HKLM\Software\HTC\Manila\Configuration.
5. Activate Sense and reorder your tabs (by deleting xml and reg key you'll revert to default order).
Have fun, I´m using it with calendar+...good alternative
Click to expand...
Click to collapse
3. Under \windows delete the file ManilaFull.xml.
4. With a registry editor, delete the key \HKLM\Software\HTC\Manila\Configuration. Are these belong to the original Manila files, or came abt when install MTP?
5. Activate Sense and reorder your tabs (by deleting xml and reg key you'll revert to default order). Delete which xml & reg key, the two in step 3&4?
Sian said:
1. Are these belong to the original Manila files, or came abt when install MTP?
2. Delete which xml & reg key, the two in step 3&4?
Click to expand...
Click to collapse
1. This folder seems to represent the arrangement of the slidericons in manila (default: 12 icons --> 12 subfolders in this folder)...i hope this answered your question.
2. Right! RegKey = Point 4, xml = Point 3
brooon said:
1. This folder seems to represent the arrangement of the slidericons in manila (default: 12 icons --> 12 subfolders in this folder)...i hope this answered your question.
2. Right! RegKey = Point 4, xml = Point 3
Click to expand...
Click to collapse
Would the deleted ManilaFull.xml be restored automatically should we uninstall MTP?
Basically, I don't want to screw up the original Manila after installing/uninstalling MTP. MTP is uninstallable, ya?
I havn´t screwed up anything after deinstalling MTP...just delete the manilafull and the configurationkey again and...finish!
Thanks for the clarification.
brooon said:
EDIT: Okay, I found the solution myself
Once again, for every HD2 User...MTP is working fine on the HD2, here´s how to set it up:
1. Install MTP
2. Turn off Sense (otherwise you won't be able to perform step 3).
2. install MTP Apple Icon.zip (if you want to have the apple icon instead of the silver windows one...i made a *.cab here)
3. Under \windows delete the file ManilaFull.xml.
4. With a registry editor, delete the key \HKLM\Software\HTC\Manila\Configuration.
5. Activate Sense and reorder your tabs (by deleting xml and reg key you'll revert to default order).
Have fun, I´m using it with calendar+...good alternative
Click to expand...
Click to collapse
You might want to give credit to the person who ACTUALLY found the solution and you just read and copied what they explained.
http://forum.xda-developers.com/showpost.php?p=5173200&postcount=865
Yep ...
Nagrom Nniuq said:
You might want to give credit to the person who ACTUALLY found the solution and you just read and copied what they explained.
http://forum.xda-developers.com/showpost.php?p=5173200&postcount=865
Click to expand...
Click to collapse
"Full idea not my. I was find it on 4pda.ru" - this is from the original tread.
Nagrom Nniuq said:
You might want to give credit to the person who ACTUALLY found the solution and you just read and copied what they explained.
http://forum.xda-developers.com/showpost.php?p=5173200&postcount=865
Click to expand...
Click to collapse
i do understand your comment Nagrom Nniuq That´s why I´ve written "once again, for every HD2 user". I didn´t want to bask in s.o. glory here, as you can see, I have edited my first post, because once there was the question how to bring the MTP Icon into the manila settings to reconfigure the position of it. I deleted the question as soon as I found the solution paryav gave in the post you´ve linked above.
Sorry if this has lead to some bad thoughts. Just wanted to share the solution
PS: I only added the Cabfile for the apple-icon and corrected the manual within this point
brooon said:
1. Install MTP
Click to expand...
Click to collapse
by point 1 You mean install cab from Your post or all points described on MTP org page (follow link You gave) ?
brooon said:
2. install MTP Apple Icon.zip (if you want to have the apple icon instead of the silver windows one...i made a *.cab here)
Click to expand...
Click to collapse
can i somehow choose mine icon to be showed on tab ?
can you put screen shot?
What kind of things can we put into tabs? Someone put WeatherRadar in HERE and it looks good...what other options do we have?
AUTO Installation CAB for Today Page
Look at this post and give a try . And post your feedbacks at that thread
UPDATED: Manila 2.5 Auto Installation CAB for TODAY SCREEN
Help ried to delete the ManilaFull.xml file but its a rom file. It will not let me delete it.
I've turned off sense and tryed totalCom & Resco Exp but the file is read only. How do i get rid of it.
Many Thx
brooon said:
EDIT: Okay, I found the solution myself
Once again, for every HD2 User...MTP is working fine on the HD2, here´s how to set it up:
1. Install MTP
2. Turn off Sense (otherwise you won't be able to perform step 3).
2. install MTP Apple Icon.zip (if you want to have the apple icon instead of the silver windows one...i made a *.cab here)
3. Under \windows delete the file ManilaFull.xml.
4. With a registry editor, delete the key \HKLM\Software\HTC\Manila\Configuration.
5. Activate Sense and reorder your tabs (by deleting xml and reg key you'll revert to default order).
Have fun, I´m using it with calendar+...good alternative
Click to expand...
Click to collapse
Hi,
Thank you for all these good work.
I installed your Manila TV tab with no problem.
the MTP with the above steps for me is installing and the tab is in my manila but everytime I reboote, it give me and error which my manila is not supported, unable to patch.
also my windows have a start button at the bottom and when I add plugins in MTP configuration, I don't have the OK button to save it in the config.
I have the same issue with your MTP v 5 .
My Rom is : Cap's special 6.5 with sense 2.5
OS version : 5.2.28011
Manila : 2.5.19211619.0.cfc
Rom version : 5.12.28011 WWE
Radio : 1.17.25.09
nobody wants to put screen shot?
Can anyone guide me through the uninstallation?
hello,
im searching ONLY the file wich can replace the window logo in the left corner with a HTC logo. Can somebody give me this file plz??
lg
honki said:
hello,
im searching ONLY the file wich can replace the window logo in the left corner with a HTC logo. Can somebody give me this file plz??
lg
Click to expand...
Click to collapse
Witch wm version You used? 6.5 ore 6.5.X??
kurt-willems said:
Witch wm version You used? 6.5 ore 6.5.X??
Click to expand...
Click to collapse
hm i think 6.5. i bought the touch hd2!
These are mine for 6.5.x, bottom left.
honki said:
hello,
im searching ONLY the file wich can replace the window logo in the left corner with a HTC logo. Can somebody give me this file plz??
lg
Click to expand...
Click to collapse
Bottom or top left ?
where do I replace those files? which folder? thx in advance
HectiQ said:
where do I replace those files? which folder? thx in advance
Click to expand...
Click to collapse
In the windows folder!
yeah i need this logo but for 6.5!! my logo is in the top left corner! i think its a shellres.192.dll???
or can someone tell my in wich file the logo is in 6.5... then i made this on myself
honki said:
yeah i need this logo but for 6.5!! my logo is in the top left corner! i think its a shellres.192.dll???
or can someone tell my in wich file the logo is in 6.5... then i made this on myself
Click to expand...
Click to collapse
Okay, it have take a lot of time to find it out, but I have find it out for you! so just installed this cab and normally it will works.
enjoy.
kurt-willems said:
Okay, it have take a lot of time to find it out, but I have find it out for you! so just installed this cab and normally it will works.
enjoy.
Click to expand...
Click to collapse
thanx a lot, but after i have installed this. the corner is just black! No logo! Only black :-(
can someone give me just the file in there the logo is saved? Not a cab just the file then i can edit this by myself
lg
honki said:
thanx a lot, but after i have installed this. the corner is just black! No logo! Only black :-(
can someone give me just the file in there the logo is saved? Not a cab just the file then i can edit this by myself
lg
Click to expand...
Click to collapse
WM 6.5 don't make yous from a simple image! but from a .dll file!!
but here you have the extract .dll file! location to install is windows!!
but strange that the cab don't worked to you!
kurt-willems said:
WM 6.5 don't make yous from a simple image! but from a .dll file!!
but here you have the extract .dll file! location to install is windows!!
but strange that the cab don't worked to you!
Click to expand...
Click to collapse
i dont know :-( ok i copy&replaced the file into the /windows but now the logo is only black too :-(
did u have the original shellres.192.dll ? I think its not the 6.5 shellres! cause the button is away too i cant go now to "Start"
omg i had to do a hard reset cause my hd2 dont booted anymore
Plz guys.... over 500 visits. Is it so difficult to give me a answer how i can change this ugly window logo in wm 6.5 with a htc logo?
I can change this bymyself but then i need the ORIGINAL shellres.192.dll from WM 6.5 !!!! Cause i cant copy this damn file from my handy (i tryed this with Total Commander!)
plz give me a cab who change this correctly or a correct shellres.192.dll for wm 6.5 THANX !!!!!
----
its just such a small logo *arghhh
plz somebody? Any solution??? I dont want the Winlogo anymore :-(
lg
Ok seems not,
someone know how i can copy my own manila files and shellres.dll from the windows folder on my fon to my pc? When i try this with TotalCommander it doesnt works "cant copy file"...
honki said:
Ok seems not,
someone know how i can copy my own manila files and shellres.dll from the windows folder on my fon to my pc? When i try this with TotalCommander it doesnt works "cant copy file"...
Click to expand...
Click to collapse
when you connect your device to pc, you used simply your explower go to your device, internal memory / Windows you orden it by type simplyer to select, take a selection of all your files you will and copying it to your pc!
simple!
ps it will take a time thair are almost 3000 manila fils! but it works I do it always.
if you used the search option you may already found this!
it can help you perhaps:
http://forum.xda-developers.com/showthread.php?t=671203&highlight=dafunk
http://forum.xda-developers.com/showthread.php?t=689230
kurt-willems said:
if you used the search option you may already found this!
it can help you perhaps:
http://forum.xda-developers.com/showthread.php?t=671203&highlight=dafunk
http://forum.xda-developers.com/showthread.php?t=689230
Click to expand...
Click to collapse
thank u but with the cfc gui i only can copy the manila files and NOT the shellres.192.dll wich i need to change the window logo in the top :-(
is there a possibility to copy that shellres.192.dll from my device to my pc, cause always when i try this, it comes " cant copy file....." i tryed this with the totalcommander :-(
ok i found the extractor tool. i changed my shellres192.dll and put the htc logo inside siggned it and copy back to my device. after reboot i had to made a hardreset again cause sense doesnt start. i hate wm 6.5 with 6.1 it was so easy to change the damn logo....
honki said:
ok i found the extractor tool. i changed my shellres192.dll and put the htc logo inside siggned it and copy back to my device. after reboot i had to made a hardreset again cause sense doesnt start. i hate wm 6.5 with 6.1 it was so easy to change the damn logo....
Click to expand...
Click to collapse
whay you make your live so complicated, whay you don't installed a Wm 6.5.5 version? I know some user will say it's not the same, but onnes After one week I changed my rom to a 6.5.5 version and I must say it's now more than 6 mounds that I used it and personality I don't will return to a 6.5 version!