Initial Screen when phone is powered on... need help - Touch Pro, Fuze General

sometime last year i flashed a rom by NATF and since have flashed over many others but since i put his rom on everytime i turn on the phone i see the boot information in the bottom corner but the screen is from NATF's rom, any help to replace this screen would be appreciated.

uramir said:
sometime last year i flashed a rom by NATF and since have flashed over many others but since i put his rom on everytime i turn on the phone i see the boot information in the bottom corner but the screen is from NATF's rom, any help to replace this screen would be appreciated.
Click to expand...
Click to collapse
there you go: http://forum.xda-developers.com/showthread.php?t=615791
that is a boot splash that i made, feel free to grab from there
and mayb you can buy me a drink if you like it

This link has a bunch of prebuilt splash screen to choose from.
http://forum.xda-developers.com/showthread.php?t=462668
I also built like 8 of them one day when I was bored.
http://forum.xda-developers.com/showthread.php?t=463046

Moved as not ROM Development..

Related

boot screen

ok well i have been on 3 different sites trying to find out how to fix this problem. I flashed to ATR 30 Manila/Rhodium Touch Pro TF3D2 about a week ago and now i have to return the phone back to sprint for a replacemnet. but the problem is when i flashed to the stock sprint ROM, the radio splash screen or the boot screen from the other rom is still there. how can go back to the stock radio spash screen ?
fyi, its the screen that has he red numbers when you first turn it on
so anyone have any ideas?
phillyboi6829 said:
ok well i have been on 3 different sites trying to find out how to fix this problem. I flashed to ATR 30 Manila/Rhodium Touch Pro TF3D2 about a week ago and now i have to return the phone back to sprint for a replacemnet. but the problem is when i flashed to the stock sprint ROM, the radio splash screen or the boot screen from the other rom is still there. how can go back to the stock radio spash screen ?
fyi, its the screen that has he red numbers when you first turn it on
Click to expand...
Click to collapse
try reading the wiki.. there are specific instructions on how to do this.
thank you thank you i fixed it

Flashed a couple, cant get rid of stupid splashes

Newbie flashing here. Followed everything and flashed my first rom yesterday.
Flashed: RUU_Kaiser_HyperDragon_IV_Mega_6.5_WWE_20091006_11-54PM
After trying that one, I then i flashed to another rom.
Flashed: KAISER_WM6.5__3_34_721_V31__B23041_09032009 (not sure which thread i got it from)
But when the phone started up it showed the stupid splash screen from the hyperdragon rom but booted into the new rom (slight problem)
Then i wanted to try another rom this morning and read to flash back to htc rom first. So i just did and i am stil looking at the last rom i flashed. I have hard reset a couple times here and there, and after installing the htc official rom (WTF problem)
Im gonna try loading this next rom now, but i have a feeling i wont see it when it boots, ugh
Not all roms come with splash screens. When you flash a rom that does not come with it's own splash, the splash from the previous rom is retained.
Hard reset, flash the stock ( oem ) rom, the when it says tap here to set up , hard reset again. If you fallowed the right flashing steps ( which you have previously, obviously ) the stock rom should boot up.
Ah, indeed. Thank you for the response. Flashed back to stock rom and all is well. Not so sure i like this flashing stuff.
carhigh said:
Ah, indeed. Thank you for the response. Flashed back to stock rom and all is well. Not so sure i like this flashing stuff.
Click to expand...
Click to collapse
Once you hardspl your phone, it is kind of hard to brick it. A stock flash usually solves everything. Flashing is addictive, it brings out the " gotta have the latest and greatest " in you.
But even after flashing over a hundred times, I still hold my breath everytime I flash. I already bricked one phone way back in the early days of Kaiser flashing when the phones first came out.

[Q] Phone Stays on OpenEclair reboot screen

so i flashed to the latest openeclair version 3.1 and once i reboot my phone it only gets to the "openeclair splash screen where it disolves in and out but it just stays there.Please help, newbie here. seen other threads but none seem to have what I'm having. if you can find one just show me the link, thanks a million.
have a G1
TexasMan80 said:
so i flashed to the latest openeclair version 3.1 and once i reboot my phone it only gets to the "openeclair splash screen where it disolves in and out but it just stays there.Please help, newbie here. seen other threads but none seem to have what I'm having. if you can find one just show me the link, thanks a million.
have a G1
Click to expand...
Click to collapse
Boot loop. Did you wipe before flashing? And you should install CM6 (froyo). OpenEclair is no longer updated/monitored because froyo came out.
no just finished downgrading to "cf29" then when on to flash, how do you do a complete wipe? tried downloading CM6 but all the links i found were broken, do you have a working link, maybe a guide,pleeease....
OpenEclair 3.1? I was under the impression that OpenEclair was dead and died at like 1.2 or something like that. Link to where the new OE is?
honeslty I cant remember the version, but its stuck on that boot screen, not the g1 screen. tried installing a new rom Htcclay's SuperFast v1.3.3 now this one goes past the boot screen but just when it looks like its going to load the home screen, screen stays black. HOW DO I WIPE?
This belongs in the area of the forum called "G1 Questions and Answers".
Please refrain from asking questions about an outdated, obsolete, and no longer supported rom. It is for the best.

Rom Flashing/Recovery Flashing help LG Optimus V

This isn't the first time I've flashed but this is the first time I've encountered this much trouble so here's the story:
I've put in a CWN-Based recovery, and I've tried to flash OverDrive ROM, when I boot into the ROM I get a blank screen and nothing happens. I've tried adding the PicaSticks Kernel to is as well, and I get a red "Hello" (not the a full startup screen) and then back to the blank again. I also tried one other ROM (the name escapes me), both ROM's claiming to have the blank screen fixed.
Also, If I flash to a Gingerbread, and my phone has been activated once before (it's off right now I have paid it yet this month), do I still need a Froyo before I can upgrade it to Gingerbread?
Any help at all with this is appreciated, thanks in advanced.
Update: I got Xionia to flash into it and I've wiped all the things it says to do prior to installing, then I'm installing Overdrive 2.2 (Android 2.2.2) de-odexed and I get a blank screen still. Not sure what to try from here. I also cannot even flash a different kernel. I feel so stupid here.
I am really not able to understand your queries.
Could you please start from the beginning :fingers-crossed:

[Completed] My note 4 screen touch calibration is off, reads my touches at a different part scree

Hey guys so I was flashing some roms on my note 4 and idk what happened and I ended up with my screen touch not being calibrated. For example when I touch the top part it reads it slightly lower that I touch it, and same with other parts of the screen. However, it reads my s pen perfectly fine and with no issues. I flashed back stock samasung rom and it didn't do anything, so I tried to flash a new rom (cyanogen) and it still didn't work. I am currently on cyanogenmod 12. Please help!
XDA Visitor said:
Hey guys so I was flashing some roms on my note 4 and idk what happened and I ended up with my screen touch not being calibrated. For example when I touch the top part it reads it slightly lower that I touch it, and same with other parts of the screen. However, it reads my s pen perfectly fine and with no issues. I flashed back stock samasung rom and it didn't do anything, so I tried to flash a new rom (cyanogen) and it still didn't work. I am currently on cyanogenmod 12. Please help!
Click to expand...
Click to collapse
Hello, and welcome to XDA! You may have to reflash stock firmware through fastboot in order to get rid of this bug. I am linking you with the help forum for your device in case someone is able to offer another suggestion: http://forum.xda-developers.com/note-4/help. You will need to register in order to post.
Good luck!

Categories

Resources