boot screen - Touch Pro, Fuze General

ok well i have been on 3 different sites trying to find out how to fix this problem. I flashed to ATR 30 Manila/Rhodium Touch Pro TF3D2 about a week ago and now i have to return the phone back to sprint for a replacemnet. but the problem is when i flashed to the stock sprint ROM, the radio splash screen or the boot screen from the other rom is still there. how can go back to the stock radio spash screen ?
fyi, its the screen that has he red numbers when you first turn it on

so anyone have any ideas?

phillyboi6829 said:
ok well i have been on 3 different sites trying to find out how to fix this problem. I flashed to ATR 30 Manila/Rhodium Touch Pro TF3D2 about a week ago and now i have to return the phone back to sprint for a replacemnet. but the problem is when i flashed to the stock sprint ROM, the radio splash screen or the boot screen from the other rom is still there. how can go back to the stock radio spash screen ?
fyi, its the screen that has he red numbers when you first turn it on
Click to expand...
Click to collapse
try reading the wiki.. there are specific instructions on how to do this.

thank you thank you i fixed it

Related

Stuck On Boot Screen

Ok, I really have read existing threads related to similar problems, but I am completely stuck on the boot screen (not bootloader screen) with my Tilt.
I flashed Dutty's 6.1 ROM last week and all had been working fine until last night. The phone was stuck with screen lock (screen nor buttons would respond). So, I performed soft reset and it just stopped at 'smart mobility' boot screen. I then performed hard reset, and again it just stopped and hung at 'smart mobility' screen.
This morning I got into the bootloader screen (power + camera + reset) and flashed original ROM (well, new officiall AT&T ROM released last month). Original ROM flashed successfully, but it now hangs on AT&T boot screen. I have tried hardspl, and flashing multiple ROMs, which all complete successfully, but it always hangs at the boot screen.
Thoughts?
what radio are u using?
Well, with Dutty's I was using 1.64.08.21 that came with the ROM... When I flashed to the stock AT&T ROM, I used the radio included with it as well (1.27.14.09).
tmac said:
Well, with Dutty's I was using 1.64.08.21 that came with the ROM... When I flashed to the stock AT&T ROM, I used the radio included with it as well (1.27.14.09).
Click to expand...
Click to collapse
Dutty's didn't come with a radio.
Well, I was using 1.64.08.21.. Right now, I have the stock ROM flashed with 1.27.14.09
I have a similar problem. I flashed alex rom yesturday then I flashed back to OEM to test something then today I flashed back to alex cube rom and it said flash was successful but when I did a hard reset during the "Tap screen to begin" my phone go stuck in the AT&T inital logo. I tried connecting to USB to reflash but USB won't detect the phone. I have hard reset, removed battery, and no avail. Does this mean I bricked my phone?
To clarify, I have been doing these for some time and also had and 8125 previously, so I understand the flashing process. I also understand that there are only certain radios that work with WM 6.1 and 6.0. This doesn't appear to be a radio incompatibility issue. As I mentioned, I was using Dutty's 6.1 ROM just fine for several days before this happened. I had been using Sleuth's 6.1 prior to that.
Tim
You always should re-flash the radio AFTER flashing the ROM. Pt yuor device into boot loader (hold camera, power & reset button). Reflash the Radio. If that doesn't work PM me & I'll walk you thru looking for bad memory blocks.
hchavarria said:
I have a similar problem. I flashed alex rom yesturday then I flashed back to OEM to test something then today I flashed back to alex cube rom and it said flash was successful but when I did a hard reset during the "Tap screen to begin" my phone go stuck in the AT&T inital logo. I tried connecting to USB to reflash but USB won't detect the phone. I have hard reset, removed battery, and no avail. Does this mean I bricked my phone?
Click to expand...
Click to collapse
NO, it does not mean brick. It means you may want to try another USB port, check the activesync connection settings, & possibly reflash using the SD card.
Edit: After looking at your MTTY feedback, & confering with a few of the Gods, I have to unfortunately tell you that your NAND chip appears to be damaged beyond flushing. The blocks can't even be erased, & that's the problem. When you reflash the blocks have previous ROM data still stored & because of the NAND damage they cannot be overwritten. Return under MFG warranty is all you can do. (Believe me, I really hate saying this & even got confirmation from Pof & Jocky) Sorry Guy.
My 30-day return policy date is tomorrow so I went to the AT&T store today and they swapped it out with a new device. They mentioned next time I have to ship it.
Could this have happened because of to much flashing? Or was this possibly an already existing defect?
I got a new one shipped to my overnight. There was obviously something wrong with it, as I tried everything under the sun. Flashed new ROM, then flashed new radio, flashed original ROM, etc. Everything gets stuck on the boot screen. At one point yesterday, I left it at the boot screen for a couple hours and it finally booted up, but then locked up again once it did. Then next time I reset, it got stuck on the boot screen again.
Please tell me you installed hardspl first?
Soft Reset Looping - Dead Kaiser
Hi all,
I have been flashing/testing many roms for a number of years now. I particularly enjoyed Jasjamming in my Tytn I days. Now...
Great work seen by many developers.
When I first got my Kaiser, i tried HardSPL, and had "white screen" issue, I then followed instructions on "white screen" thread....copied cab to kaiser....ran cab from kaiser..........eventually was able to flash to a new/ different ROM
However, I recently flashed my Kaiser and after using it for 6-7 hours after flash, it soft reset itself. It continued to keep soft reseting itself without geting to boot screen. It kept reading "smart mobility" and it would reset, vibrate, reset, vibrate, reset.......
I tried EVERYTHING - remove battery, flash back to original ROM, change radio (bootloader worked in safe mode - holding down camera button), but to no avail.
I then tried MTTY, and no go with this too. I eventually had to give my phone back in to HTC.
The question I ask is what is the cause of this? Is it excessive flashing? Is is HardSPL? Any comments/ suggestions would be welcomed...
Many thanks
P1Tater said:
Please tell me you installed hardspl first?
Click to expand...
Click to collapse
If you are asking me that question, the answer is yes I did run hardspl. As I mentioned, I have been doing this for long enough that I know what I am doing. I also mentioned that I was successfully running Sleuth's 6.1 for a month or two before switching to Dutty's new 6.1. I was only running Dutty's for a few days before all of this happened.
There is definitely something wrong.. if I let it sit long enough, it will eventually boot. It will work for a few minutes, and then lock up again. Once I reset, it sits on the boot screen for a couple hours again. I have flashed several different ROMs and Radios to get different results, but the results are always the same.. It hangs at the boot screen.
I guess you have also tried going to the tri-color screen and re-flashing as well as a HR or MTTY command
tmac said:
If you are asking me that question, the answer is yes I did run hardspl. As I mentioned, I have been doing this for long enough that I know what I am doing. I also mentioned that I was successfully running Sleuth's 6.1 for a month or two before switching to Dutty's new 6.1. I was only running Dutty's for a few days before all of this happened.
There is definitely something wrong.. if I let it sit long enough, it will eventually boot. It will work for a few minutes, and then lock up again. Once I reset, it sits on the boot screen for a couple hours again. I have flashed several different ROMs and Radios to get different results, but the results are always the same.. It hangs at the boot screen.
Click to expand...
Click to collapse
Please don't take offence to my probing, as my questions weren't directly directed to you. All I am saying is that we need to understand what is the actual cause of this problem, or we all will be "flashing in the dark", and fearing that this problem could be imminent every time we flash in the future.
Many thanks.
P1Tater said:
I guess you have also tried going to the tri-color screen and re-flashing as well as a HR or MTTY command
Click to expand...
Click to collapse
P1 - Since I can't get the phone to boot completely (well, except for waiting several hours), the only way that I have been flashing different ROMs is from the tri-color screen. Regardless of what ROM or Radio I try, it still just hangs at the boot screen. The only thing I haven't tried was MTTY.
AvinashDhaniraj said:
Please don't take offence to my probing, as my questions weren't directly directed to you. All I am saying is that we need to understand what is the actual cause of this problem, or we all will be "flashing in the dark", and fearing that this problem could be imminent every time we flash in the future.
Many thanks.
Click to expand...
Click to collapse
I was actually replying to P1, hence the reason I quoted him. So, I don't take offense to anything you said.
Well, I hope your not getting offended to my questions? I am just trying to cover all of the simple fixes first since those have been the majority of the things that fix "Most" people's issues. I suggest getting in touch with GSLeon3. He has a pretty good handle on what goes on in flashing and all of the fixes.
P1Tater said:
Well, I hope your not getting offended to my questions? I am just trying to cover all of the simple fixes first since those have been the majority of the things that fix "Most" people's issues. I suggest getting in touch with GSLeon3. He has a pretty good handle on what goes on in flashing and all of the fixes.
Click to expand...
Click to collapse
Not offended at all... I am appreciative of the suggestions.

How do I update the very 1st screen before the radio rom version shows?

I flashed an att rom and since flashing other roms the other boot and animated screens change but the very first screen b4 the rom or radio version in red shows still has the "ATT test rom is not for sale" screen. How do I change this prferrable without flashing a whole new rom.
mcq3000 said:
I flashed an att rom and since flashing other roms the other boot and animated screens change but the very first screen b4 the rom or radio version in red shows still has the "ATT test rom is not for sale" screen. How do I change this prferrable without flashing a whole new rom.
Click to expand...
Click to collapse
Just flash a new splash screen. Check the link in my signature, i have several t choose from. Also P1Tater (which i got most of mine from) also has several others. For future reference this should be posted in the thread related to the rom you installed, or you could perform a search for splash screens and see what comes up.
mcq3000 said:
I flashed an att rom and since flashing other roms the other boot and animated screens change but the very first screen b4 the rom or radio version in red shows still has the "ATT test rom is not for sale" screen. How do I change this prferrable without flashing a whole new rom.
Click to expand...
Click to collapse
Instructions how to flash the custom splash screen can be found here: http://forum.xda-developers.com/showthread.php?t=334907

Over Flashed

I have been flashing several ROMs trying to find the right one for me, including trying to cook my own ROM which caused me to flash several times due to testing my progress. At this point I flashed NATF v.1.2 ROM which seemed to work pretty good but all of a sudden my Fuze froze and I did a soft reset and now my phone will not go past the boot screen. I can reach SPL (Tri-Color Screen). I do have Hard-SPL installed since it reads SPL-1.90.OliNex
I have tried to flash the stock AT&T ROM and I get the same problem, it won't move past the boot screen. Does this mean a bad Nand and needs to be exchanged or is there something I can do to save my Fuze?
http://wiki.xda-developers.com/index...actedRadioRoms
If yours is from ATT, you want 1.01.25.16 - download using one of the links under the RUU column.
flash it to the device.
Sean
sean_nj said:
http://wiki.xda-developers.com/index...actedRadioRoms
If yours is from ATT, you want 1.01.25.16 - download using one of the links under the RUU column.
flash it to the device.
Sean
Click to expand...
Click to collapse
I have been using the official radio that came which was 1.02.25.32. I just noticed that if I reset the device a couple times it boots up fine. But if you reset again it get's stuck at boot.

Splashscreen

Hi, I have read through the wiki guide for splashing.
Still have not been able to resolve this issue:
I was using the PDAUltimate ROM, then decided to switch ROMs and try a new one. however, when I do the hard reset and flash the new ROM, I still get the PDA splash screen.
any way I can prevent this from happening?
chrisrc1985 said:
Hi, I have read through the wiki guide for splashing.
Still have not been able to resolve this issue:
I was using the PDAUltimate ROM, then decided to switch ROMs and try a new one. however, when I do the hard reset and flash the new ROM, I still get the PDA splash screen.
any way I can prevent this from happening?
Click to expand...
Click to collapse
Not all cooked roms come with new custom splash screens and sometimes because of the the splashes from previous roms get leftover. If it bothers you, flash a new custom splash screen.
http://forum.xda-developers.com/showthread.php?t=334907

Initial Screen when phone is powered on... need help

sometime last year i flashed a rom by NATF and since have flashed over many others but since i put his rom on everytime i turn on the phone i see the boot information in the bottom corner but the screen is from NATF's rom, any help to replace this screen would be appreciated.
uramir said:
sometime last year i flashed a rom by NATF and since have flashed over many others but since i put his rom on everytime i turn on the phone i see the boot information in the bottom corner but the screen is from NATF's rom, any help to replace this screen would be appreciated.
Click to expand...
Click to collapse
there you go: http://forum.xda-developers.com/showthread.php?t=615791
that is a boot splash that i made, feel free to grab from there
and mayb you can buy me a drink if you like it
This link has a bunch of prebuilt splash screen to choose from.
http://forum.xda-developers.com/showthread.php?t=462668
I also built like 8 of them one day when I was bored.
http://forum.xda-developers.com/showthread.php?t=463046
Moved as not ROM Development..

Categories

Resources