Ok, I really have read existing threads related to similar problems, but I am completely stuck on the boot screen (not bootloader screen) with my Tilt.
I flashed Dutty's 6.1 ROM last week and all had been working fine until last night. The phone was stuck with screen lock (screen nor buttons would respond). So, I performed soft reset and it just stopped at 'smart mobility' boot screen. I then performed hard reset, and again it just stopped and hung at 'smart mobility' screen.
This morning I got into the bootloader screen (power + camera + reset) and flashed original ROM (well, new officiall AT&T ROM released last month). Original ROM flashed successfully, but it now hangs on AT&T boot screen. I have tried hardspl, and flashing multiple ROMs, which all complete successfully, but it always hangs at the boot screen.
Thoughts?
what radio are u using?
Well, with Dutty's I was using 1.64.08.21 that came with the ROM... When I flashed to the stock AT&T ROM, I used the radio included with it as well (1.27.14.09).
tmac said:
Well, with Dutty's I was using 1.64.08.21 that came with the ROM... When I flashed to the stock AT&T ROM, I used the radio included with it as well (1.27.14.09).
Click to expand...
Click to collapse
Dutty's didn't come with a radio.
Well, I was using 1.64.08.21.. Right now, I have the stock ROM flashed with 1.27.14.09
I have a similar problem. I flashed alex rom yesturday then I flashed back to OEM to test something then today I flashed back to alex cube rom and it said flash was successful but when I did a hard reset during the "Tap screen to begin" my phone go stuck in the AT&T inital logo. I tried connecting to USB to reflash but USB won't detect the phone. I have hard reset, removed battery, and no avail. Does this mean I bricked my phone?
To clarify, I have been doing these for some time and also had and 8125 previously, so I understand the flashing process. I also understand that there are only certain radios that work with WM 6.1 and 6.0. This doesn't appear to be a radio incompatibility issue. As I mentioned, I was using Dutty's 6.1 ROM just fine for several days before this happened. I had been using Sleuth's 6.1 prior to that.
Tim
You always should re-flash the radio AFTER flashing the ROM. Pt yuor device into boot loader (hold camera, power & reset button). Reflash the Radio. If that doesn't work PM me & I'll walk you thru looking for bad memory blocks.
hchavarria said:
I have a similar problem. I flashed alex rom yesturday then I flashed back to OEM to test something then today I flashed back to alex cube rom and it said flash was successful but when I did a hard reset during the "Tap screen to begin" my phone go stuck in the AT&T inital logo. I tried connecting to USB to reflash but USB won't detect the phone. I have hard reset, removed battery, and no avail. Does this mean I bricked my phone?
Click to expand...
Click to collapse
NO, it does not mean brick. It means you may want to try another USB port, check the activesync connection settings, & possibly reflash using the SD card.
Edit: After looking at your MTTY feedback, & confering with a few of the Gods, I have to unfortunately tell you that your NAND chip appears to be damaged beyond flushing. The blocks can't even be erased, & that's the problem. When you reflash the blocks have previous ROM data still stored & because of the NAND damage they cannot be overwritten. Return under MFG warranty is all you can do. (Believe me, I really hate saying this & even got confirmation from Pof & Jocky) Sorry Guy.
My 30-day return policy date is tomorrow so I went to the AT&T store today and they swapped it out with a new device. They mentioned next time I have to ship it.
Could this have happened because of to much flashing? Or was this possibly an already existing defect?
I got a new one shipped to my overnight. There was obviously something wrong with it, as I tried everything under the sun. Flashed new ROM, then flashed new radio, flashed original ROM, etc. Everything gets stuck on the boot screen. At one point yesterday, I left it at the boot screen for a couple hours and it finally booted up, but then locked up again once it did. Then next time I reset, it got stuck on the boot screen again.
Please tell me you installed hardspl first?
Soft Reset Looping - Dead Kaiser
Hi all,
I have been flashing/testing many roms for a number of years now. I particularly enjoyed Jasjamming in my Tytn I days. Now...
Great work seen by many developers.
When I first got my Kaiser, i tried HardSPL, and had "white screen" issue, I then followed instructions on "white screen" thread....copied cab to kaiser....ran cab from kaiser..........eventually was able to flash to a new/ different ROM
However, I recently flashed my Kaiser and after using it for 6-7 hours after flash, it soft reset itself. It continued to keep soft reseting itself without geting to boot screen. It kept reading "smart mobility" and it would reset, vibrate, reset, vibrate, reset.......
I tried EVERYTHING - remove battery, flash back to original ROM, change radio (bootloader worked in safe mode - holding down camera button), but to no avail.
I then tried MTTY, and no go with this too. I eventually had to give my phone back in to HTC.
The question I ask is what is the cause of this? Is it excessive flashing? Is is HardSPL? Any comments/ suggestions would be welcomed...
Many thanks
P1Tater said:
Please tell me you installed hardspl first?
Click to expand...
Click to collapse
If you are asking me that question, the answer is yes I did run hardspl. As I mentioned, I have been doing this for long enough that I know what I am doing. I also mentioned that I was successfully running Sleuth's 6.1 for a month or two before switching to Dutty's new 6.1. I was only running Dutty's for a few days before all of this happened.
There is definitely something wrong.. if I let it sit long enough, it will eventually boot. It will work for a few minutes, and then lock up again. Once I reset, it sits on the boot screen for a couple hours again. I have flashed several different ROMs and Radios to get different results, but the results are always the same.. It hangs at the boot screen.
I guess you have also tried going to the tri-color screen and re-flashing as well as a HR or MTTY command
tmac said:
If you are asking me that question, the answer is yes I did run hardspl. As I mentioned, I have been doing this for long enough that I know what I am doing. I also mentioned that I was successfully running Sleuth's 6.1 for a month or two before switching to Dutty's new 6.1. I was only running Dutty's for a few days before all of this happened.
There is definitely something wrong.. if I let it sit long enough, it will eventually boot. It will work for a few minutes, and then lock up again. Once I reset, it sits on the boot screen for a couple hours again. I have flashed several different ROMs and Radios to get different results, but the results are always the same.. It hangs at the boot screen.
Click to expand...
Click to collapse
Please don't take offence to my probing, as my questions weren't directly directed to you. All I am saying is that we need to understand what is the actual cause of this problem, or we all will be "flashing in the dark", and fearing that this problem could be imminent every time we flash in the future.
Many thanks.
P1Tater said:
I guess you have also tried going to the tri-color screen and re-flashing as well as a HR or MTTY command
Click to expand...
Click to collapse
P1 - Since I can't get the phone to boot completely (well, except for waiting several hours), the only way that I have been flashing different ROMs is from the tri-color screen. Regardless of what ROM or Radio I try, it still just hangs at the boot screen. The only thing I haven't tried was MTTY.
AvinashDhaniraj said:
Please don't take offence to my probing, as my questions weren't directly directed to you. All I am saying is that we need to understand what is the actual cause of this problem, or we all will be "flashing in the dark", and fearing that this problem could be imminent every time we flash in the future.
Many thanks.
Click to expand...
Click to collapse
I was actually replying to P1, hence the reason I quoted him. So, I don't take offense to anything you said.
Well, I hope your not getting offended to my questions? I am just trying to cover all of the simple fixes first since those have been the majority of the things that fix "Most" people's issues. I suggest getting in touch with GSLeon3. He has a pretty good handle on what goes on in flashing and all of the fixes.
P1Tater said:
Well, I hope your not getting offended to my questions? I am just trying to cover all of the simple fixes first since those have been the majority of the things that fix "Most" people's issues. I suggest getting in touch with GSLeon3. He has a pretty good handle on what goes on in flashing and all of the fixes.
Click to expand...
Click to collapse
Not offended at all... I am appreciative of the suggestions.
Related
Hey folks -
I upgraded my ATT Tilt to DUtty's 6.1 today (first time flashing).
Anyway, after sound wasn't working I read up on the radio information and decided to go with 1.64.08.21 based upon what some folks said worked for them in various posts.
To flash the ROM, I am using JumpSPL1.56-KAIS.exe loaded onto the device.
Dutty's worked fine, but the radio made it to 99% then hung. I waited for 3-4 minutes and nothing happened, but the flashing tool said it lost connection. I followed the recover steps including a hard reboot (and went to the tree color screen with "serial" at the bottom), but now each try just hangs at 0% when trying to install the radio ROM.
What do I do?
Thanks,
Tom
pearsth said:
Hey folks -
I upgraded my ATT Tilt to DUtty's 6.1 today (first time flashing).
Anyway, after sound wasn't working I read up on the radio information and decided to go with 1.64.08.21 based upon what some folks said worked for them in various posts.
To flash the ROM, I am using JumpSPL1.56-KAIS.exe loaded onto the device.
Dutty's worked fine, but the radio made it to 99% then hung. I waited for 3-4 minutes and nothing happened, but the flashing tool said it lost connection. I followed the recover steps including a hard reboot (and went to the tree color screen with "serial" at the bottom), but now each try just hangs at 0% when trying to install the radio ROM.
What do I do?
Thanks,
Tom
Click to expand...
Click to collapse
from what i understand you cant flash a radio with the jumpspl. why not install hardspl and be done with it. it's a one time thing.
DELETED... Above is better^^
pearsth said:
Hey folks -
I upgraded my ATT Tilt to DUtty's 6.1 today (first time flashing).
Anyway, after sound wasn't working I read up on the radio information and decided to go with 1.64.08.21 based upon what some folks said worked for them in various posts.
To flash the ROM, I am using JumpSPL1.56-KAIS.exe loaded onto the device.
Dutty's worked fine, but the radio made it to 99% then hung. I waited for 3-4 minutes and nothing happened, but the flashing tool said it lost connection. I followed the recover steps including a hard reboot (and went to the tree color screen with "serial" at the bottom), but now each try just hangs at 0% when trying to install the radio ROM.
What do I do?
Thanks,
Tom
Click to expand...
Click to collapse
1.) Disable USB connections in activesync.
2.) Put your phone into the tri-color screen.
3.) Flash the original shipped ROM.
Something i learned this past week from another poster, that had a problem. U can't JumpSPL a radio Rom.
Try flashing a 6.0 rom and see from there. I assume you couldn't Hard SSPL your device? if this is not the case then your better off doing that
I tried hardspl and it didn't work - constant white screen.
Thanks for the tip on original ROM, trying that now.
Tom
pearsth said:
I tried hardspl and it didn't work - constant white screen.
Thanks for the tip on original ROM, trying that now.
Tom
Click to expand...
Click to collapse
did you try the hrdspl, white screen solved thread?
http://forum.xda-developers.com/showthread.php?t=354061
jocky made it so you can flash hardspl from what I understand.
you can also try this to get hardspl on your device.
http://forum.xda-developers.com/showthread.php?t=361236
Does this mean I need to avoid flashing at all if I cannot use hardspl?
avoid flashing radio, but try the links that tater posted and see if it solves your problem.
Thanks, everyone...just got back to ATT stock rom and all is well again. Will try the links posted above!
Tom
pearsth said:
Thanks, everyone...just got back to ATT stock rom and all is well again. Will try the links posted above!
Tom
Click to expand...
Click to collapse
just be careful to follow the instructions to the letter. Good luck.
Just finished re-doing everything. I was confused regarding the fact that JumpSPL didn't replace HardSPL, it just helped getting it working.
Just finished reinstalling ditty and the same radio version and all is working great.
Now off to figure out how to play with TouchFlo and Cube.
Thanks!!!
pearsth said:
Just finished re-doing everything. I was confused regarding the fact that JumpSPL didn't replace HardSPL, it just helped getting it working.
Just finished reinstalling ditty and the same radio version and all is working great.
Now off to figure out how to play with TouchFlo and Cube.
Thanks!!!
Click to expand...
Click to collapse
very welcome. glad to see you back up and running.
Was installing duttys rom when my anti-virus program started. Update failed and since then all I see is the tri-colour screen. Sometimes I can get the rom updater to recognise my TyTNII but it will not continue to upgrade. Any suggestions. Have tried mtty1.42 but it doesn't seem to have a usb port option, have tried hard reset etc with no luck. Any suggestions would be greatly appreciated.
An update, I have tried several rom updates since, most get to the stage where the progress bar is shown and the stop. The HTC update to revert to shipped rom gets to 1% and then tells me that this rom is not suitable for my pda!
How about some more information...
What is your Tytn II - Tilt or HTC?
What Rom was on it before you tried upgrading?
What Radio was on it before you tried upgrading?
What version of Duttys did you try to flash?
Did you upgrade to HardSPL before you tried flashing?
This should enable someone to begin trying to unbrick your phone.
Also DO NOT USE MTTY unless you know what you are doing - it can seriously kill your Tytn if used incorrectly. Wait for GSLEON3 to swing by before trying this - but he's very busy at the moment helping others unbrick their toys so you may have to wait for a while.
If you had an original rom/radio from AT&T or HTC it shouldn't hurt trying to download an original rom and try to flash - preferably using your SD card.
Also, while you're waiting for someone to help, have a good read through the Kaiser Wiki (in my signature) before trying anything else.
what are the steps that u take? let us know if u are missing any
HTC TyTN 11, Was using Q-mobile 1.2 but couldn't install tom tom navigator 6, don't know what radio it was using because i hadn't got that far. Was trying to flash Dutty's 6.1 and I had run jumpspl from device because I got the white screen when I treid to run 1.93 so installed 1.56 to pda and ran it. this worked to insatll Q-mobile this morning.
Hope this helps!
what are the steps that u take? let us know if u are missing any
Try to reset pda keep getting tri-colour, attach usb and usb shows at base of screen. When i try to install rom The problem in my second post occurs. I cannot hard reset device to anything other than the tri-colour
Thanks for your help, I tried one of the roms indicated and it worked! I have spent so much time reading various wikis and downloading files. I'm not entirely sure why it worked this time but I'm not about to ask questions! Thanks again!
OK, now you've got your phone working again, make sure that you get HardSPL installed before you try anymore flashing.
ok i was installing KAIS_Radinly_0.26.07.06_CustomRUU and it froze at 96% and now my phone is bricked!! every time i restart the phone its stuck at the RED GREEN BLUE and WHITE screen.. i tried using mtty but then im not trying to mess my phone up any more. i dont understand how to fix it.. if i download a new ROM and put it on my SD card then how do i read it with my phone? sorry guys, im a noob at this as you can tell..
nm guys. i just ran the new rom and it worked! haha sorry for posting too quick!
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
xmooglex said:
okay i have one problem after fixing it. i downloaded the TEST rom for the ATT tilt and now every time i reboot my phone it says 'TEST ONLY. NOT FOR SALE.' how do i get rid of this? when i installed a new rom it still says this and i even tried hard resetting my phone but it did not reset anything to factory settings. it just reloaded the rom that i last had!
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=KaiserFAQ
your answer is in there
I have been flashing several ROMs trying to find the right one for me, including trying to cook my own ROM which caused me to flash several times due to testing my progress. At this point I flashed NATF v.1.2 ROM which seemed to work pretty good but all of a sudden my Fuze froze and I did a soft reset and now my phone will not go past the boot screen. I can reach SPL (Tri-Color Screen). I do have Hard-SPL installed since it reads SPL-1.90.OliNex
I have tried to flash the stock AT&T ROM and I get the same problem, it won't move past the boot screen. Does this mean a bad Nand and needs to be exchanged or is there something I can do to save my Fuze?
http://wiki.xda-developers.com/index...actedRadioRoms
If yours is from ATT, you want 1.01.25.16 - download using one of the links under the RUU column.
flash it to the device.
Sean
sean_nj said:
http://wiki.xda-developers.com/index...actedRadioRoms
If yours is from ATT, you want 1.01.25.16 - download using one of the links under the RUU column.
flash it to the device.
Sean
Click to expand...
Click to collapse
I have been using the official radio that came which was 1.02.25.32. I just noticed that if I reset the device a couple times it boots up fine. But if you reset again it get's stuck at boot.
I've been flashing new ROMS on an 8525 for a couple of years now, but I'm new to the 8925.
I've been reading a lot, I think I understand the relation between SPL and the ROMs now, but I'm still puzzled.
I keep getting a lot of cruft left behind from prior ROMs and don't know how to get rid of it. for example about three ROMs ago, I flashed the "Mobile Vista" from ansar. Now I still get his Today theme, and there are still a lot of apps installed that read "ansar..."
I've tried removing the battery before flashing, making sure the SPL version is OK with the ROM doing hard resets - nothing seems to let this device start from a "clean slate".
I'm trying to find a ROM I can be happy with, which is why I'm trying so many, but I can't fairly evaluate aon one ROM if I don't know what I've really got installed.
TIA
Walt
I've never heard of anything like that happening Are you sure it is the today theme, or just the boot splash? That would be most likely.
As far as the programs, maybe most of them are from ansar? Which ROM are you using right now?
I just flashed the PDA Corner latest version (15) and it seems to be behaving now. Prior ROMS I tried this morning included Athine, Garmin and Phoenix.
Prior to flashing PDA Corner, I did an "Erase memory" (hard reset from software) and removed the battery for about 10 minutes. Maybe that's what did it. I agree, I've never seen anything like this before, I always thought that flashing the ROM reased everything, but then I started reading about SPL on the Kaiser somehow being more than just a bootloader so I got concerned.
And yes, it was the Today screen including clock, wallpaper, etc. The splash screen on bootup actually did change to the one corresponding to the new ROM.
Thanks.
Walt
When flashing a new ROM, when you get to the "Tap screen to begin" do you perform a Hard Reset?
If not, I suggest you start doing now.
Also, merschle (ex-moderator and Artemis cook) recommended flashing a ROM twice with a Hard Reset in between. I don't do this, but it just might help
Ta
Dave
Flash a stock HTC rom and then try a modified rom again. It always helped me when i got strange flash problems.
http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Billun said:
Flash a stock HTC rom and then try a modified rom again. It always helped me when i got strange flash problems.
http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Click to expand...
Click to collapse
I hard reset three times then I flash an OEM ROM, then I hard reset three more times to be sure. I know it's anal, but it works for me.
I don't know how you're flashing try the SD Card method.
It's safer and more reliable.
The SPL & Rom have closer relationship than on your older device.
A sign of have the wrong SPL or needing to change to another SPL is freezing. If you notice your device is freezing or non-responsive, flash the recommended SPL by the chef.
Don't worry any, I was the same when I upgraded from the Wizard...gotta learn all over again.
Hello,
I am experiencing random freezes with almost any WM6.$ ROM i flash it with.
My current setup is:
HardSPL 3.56
Radio Version: 1.65.21.18
ROM Version: Anryl 21500 rev6
I have also tried Medkid's versions, 1.33, 1.62, 1.62F
Ill give wjtk's version a try today see how this goes.
The problem is, that it will freeze on stupid times, while its a clean installation. e.g. yesterday Medkid's 1.62F froze up on me when i tried to change the time. Then it needed a soft reset through the button, it froze on the boot screen (the one that shows the radio version etc etc) had to soft reset again through the button and i somehow hard reset it that way...
Any ideas?
(Im pretty sure i have CID unlocked it, is there any way to check it?)
Thanks in advance,
Andrew
dumraden said:
Hello,
I am experiencing random freezes with almost any WM6.$ ROM i flash it with.
My current setup is:
HardSPL 3.56
Radio Version: 1.65.21.18
ROM Version: Anryl 21500 rev6
I have also tried Medkid's versions, 1.33, 1.62, 1.62F
Ill give wjtk's version a try today see how this goes.
The problem is, that it will freeze on stupid times, while its a clean installation. e.g. yesterday Medkid's 1.62F froze up on me when i tried to change the time. Then it needed a soft reset through the button, it froze on the boot screen (the one that shows the radio version etc etc) had to soft reset again through the button and i somehow hard reset it that way...
Any ideas?
(Im pretty sure i have CID unlocked it, is there any way to check it?)
Thanks in advance,
Andrew
Click to expand...
Click to collapse
This subject has been covered many many times, there really was no need to start yet another thread on it.
Try flashing cmonex's 3.29hard s Spl., it is a patched spl for random freezes.
http://rapidshare.com/files/191032042/Cmonex_s_HardSPL3.29_SD.zip
6.5 is still in development so it can't be error free no matter you change the radio's, SPL's. But our master chefs are really working hard to outperform MS guyz.
denco7 said:
This subject has been covered many many times, there really was no need to start yet another thread on it.
Try flashing cmonex's 3.29hard s Spl., it is a patched spl for random freezes.
http://rapidshare.com/files/191032042/Cmonex_s_HardSPL3.29_SD.zip
Click to expand...
Click to collapse
sakshamkatyal said:
6.5 is still in development so it can't be error free no matter you change the radio's, SPL's. But our master chefs are really working hard to outperform MS guyz.
Click to expand...
Click to collapse
Well said guys.. closing thread as answers are out there without a new thread