Hi,
My blackstone's WIFI is not working (and has never been), so I have to send it back to deliverer. I have already installed original ROM from HTC, but need to install original SPL. Can somebody help me how to do this or where I can find necessary info. Thanks al lot!
Wim
Related
Newbie need help!
I have an i-mate SP5m (bought pre-owned) which I'd like to go upgrade to latest WM6 cooked roms found here...
I don't have a copy of it's original shipped ROM, which is why I'd like to have a copy, so that whenever I'll be having problems later on, I can go revert to the original shipped ROM without (eg. downgrading)...
Exactly how will I go about dumping the shipped ROM?
Help highly appreciated! Thanks!!!
Search in the FTP, its there
what is the tool name? pdocread ?
I want to Backup WM5 Original ROM too
THANKS !!!
yeah... newbie here and can't seem to get to the first steps in backing up my ROM... any other help maybe???
Vario III Backup Rom UK
Hard Spl guide
http://forum.xda-developers.com/showthread.php?t=332246
Reflashing your ROM is dangerous, and you could brick your device if it goes wrong. Only proceed if you are confident with what you are doing - we take no responsibility should anything go wrong!
http://www.megaupload.com/?d=B5RZO448
does this include the original tmobile spl? if not does anyone have a copy of it
Russ
Deathace said:
does this include the original tmobile spl? if not does anyone have a copy of it
Russ
Click to expand...
Click to collapse
OS ONLY
i only wanted the os, there's no need for me to reflash the spl
can you get the original spl aswell? I want to be able to flash the whole phone back to factory defaults incase it buggers up like it has done twice now. silly thing stops making phone calls or sending messages.
Yep Id like this too please, if possible.
Harsesis said:
can you get the original spl aswell? I want to be able to flash the whole phone back to factory defaults incase it buggers up like it has done twice now. silly thing stops making phone calls or sending messages.
Click to expand...
Click to collapse
unable to repack orignal spl, Yet! i have a full dump so when it's possible to repack i will post it
http://forum.xda-developers.com/showthread.php?t=335568
other than that i can't help you?
jcespi2005 said:
There are only (for what i know) two SPL versions, and the most common one is the 1.56 included in most of shipped ROMs.
You can take the WWE one, extract the content, repack the SPL.NB and flash it. If you have HardSPL, you need to use SSPL. This thread helps you...http://forum.xda-developers.com/showthread.php?t=335568
Cheers.
Click to expand...
Click to collapse
Thank You
Hi,
thank you very much for this...
George
i love you man!
Hi,
Is this ROM the exact same as when you purchase a Vario III? Is there any extra/less programs?
Thanks
Msuk
Hi there... is it possible to find this on another download site... I am having issues with megaupload at the moment... (not sure if its because of my location or its something else) cheers...
msuk said:
Hi,
Is this ROM the exact same as when you purchase a Vario III? Is there any extra/less programs?
Thanks
Msuk
Click to expand...
Click to collapse
yes the same
Hi guys,
I have a touch pro with a few issues (the same as everyone else) and I want to try a few things out in order to try and fix it. I just need to know I can revert it back to its original state if I need to...
This is my first Windows Mobile device, I have flashed hardspl to the device as the thread gives instructions on how to flash back, I'm just a bit concerned about restoring the original rom if I change it; The wiki has a few stock roms available, but it seems they include the SPL which I've read wont work correctly with hardspl installed. I've backed up the rom using pdocread, can I flash it back with pdocwrite without any issues? Obviously if I reconstruct it to flash back, it wont have the HTC signature so if I put the original SPL back on I will have a brick.
I'd like to mess around in the kitchen but need a way to revert it back to retail. How is this usually done?
Thanks.
Simply flash your chosen stock ROM (from the wiki as you pointed out). This will not overwrite your SPL. Hard SPL simply enables you to flash any ROM, stock or otherwise. There is a Stock SPL that you can flash for warranty purposes in post #1 of the HardSPL thread.
Caind said:
Hi guys,
I have a touch pro with a few issues (the same as everyone else) and I want to try a few things out in order to try and fix it. I just need to know I can revert it back to its original state if I need to...
This is my first Windows Mobile device, I have flashed hardspl to the device as the thread gives instructions on how to flash back, I'm just a bit concerned about restoring the original rom if I change it; The wiki has a few stock roms available, but it seems they include the SPL which I've read wont work correctly with hardspl installed. I've backed up the rom using pdocread, can I flash it back with pdocwrite without any issues? Obviously if I reconstruct it to flash back, it wont have the HTC signature so if I put the original SPL back on I will have a brick.
I'd like to mess around in the kitchen but need a way to revert it back to retail. How is this usually done?
Thanks.
Click to expand...
Click to collapse
Upload Part01.raw and Part02.raw somewhere and i will reconstruct for you into NBH file ready to flash
Cheers
can someone help me please, I have an i-mate JASJAM and I installed hardSPL then a wm6 ROM (by Josh) on it, and now I want to restore it back to my original wm5, I tried hard resetting but this doesn't help. Can someone direct me in the right direction to do so? Any help is appreciated, thanks
you have replaced the rom it's gon
only way to get it back is to flash your device
with a wm5 rom made for the device
Hi guys,
nice work from JockyW, ookba and everyone doing the job to bring us excellent software (pls if i forgot anyone, don't be mad ). I really appreciated the RUU_MAPL_3VOLUTION_WM65_3VO.2.50.112509 for a long time but I will sell my Maple now. It time to move on and try something new. Thats why I need to go back to the Official HTC ROM. I just cannot get it to work...
Obviously just flashing the original HTC Rom won't do the job because of the Hardspl, but how do i get around this. I just need some help on going back.
Thanks in advance, UKFencer
160 hits and nobody got an idea...? Or is the answer too simple?
If i am missing something pls point me to it.
Thanks,
UKFencer
Sorry, I don't think I have any idea. I *think just flashing the original ROM should work, I have upgrade/downgraded other phones with factory/custom roms with no problem. I have a question on top of yours. If I don't Hard SPL, what do I lose? There's a thread about downgrading the HardSpl to 1.19 or 18, I don't know if that helps. I would like an answer to my AT&T question as well. Sorry about hijacking your topic but I at least bumped it.
Download original rom in HTC website. Thats all.
Or you could use goldcard model to flash back to original WWE ROM
alinkwok said:
Or you could use goldcard model to flash back to original WWE ROM
Click to expand...
Click to collapse
where can i get that?
Sorry, for not replying any earlier, but was finishing my finally year project...took longer than i thought...anyway now i back to re-install the original firmware...
@Sonnguyen
doesn't work because of HardSPL...tried it.
@alinkwok
yeah, i've read about it...without a seccond mobile, i'll have to buy the software if i recall correctly.
So, any other tips where to look for howtos...?
UKFencer
Have you ever imagined looking into Wiki
If I were your Maple buyer I would apreciate more to have it upgraded to a cooked ROM, rather to have ugly stock.
You can go back and install any ROM you want
orb3000 said:
Have you ever imagined looking into Wiki
If I were your Maple buyer I would apreciate more to have it upgraded to a cooked ROM, rather to have ugly stock.
You can go back and install any ROM you want
Click to expand...
Click to collapse
Yes, I agree with your sentiments regarding the ROM, point is however that once the custom ROM is flashed with the Hardspl, the original ROM cannot be flashed back, which is sometimes required, especially if something happens to the phone and it has to be returned for repairs etc to the retailers.
Strange, it´s the 1st time I know that an HTC device can´t go back to original ROM...
I´ll do some research...
The original SPL is included in the package you downloaded from here..... Just have to use it, flash original rom, and you are on your way....
How exactly do I flash the original spl nbh file? I tried replacing the hard spl nbh with the original and running RUU but the spl remained the same.
you need to get the one from here: http://forum.xda-developers.com/showthread.php?t=558003
there is a folder marked original spl in there. it is the same process you did when you put the hard spl on there, just using the original nbh