Hi folks,
is there a way to place TT N3 on my 512 MB SD card? Since I've got the maps on it and TT N3 is of no use without them, I just would find it logical to put them together and remove the whole lot by taking the SD out.
The BT GPS receiver software should still stay on the MDA.
Thanks
It wont work because some files are also written to the main memory even if you choose sd card as install destination.
You can move the app itself over to SD but performance suffers badly and it results in frequent lock-ups. It's not a supported configuration and best avoided.
During installation of TTN3 I installed the app on Storage Card and not in Main memory. Indeed a few items are installed on main memory, but the main app itself resides on CD Card. I have not experienced a lockup o f TTN3 during normal use.
I am a happy user of TTN3 on SD Card.
O2 XDA-I 32 MB:
ROM Version: 4.01.16 ENG
ROM Date: 02/04/04
Radio Version: 4.16.00
Protocol version: 32S54
The lockups occur most on MDAII/XDA2/Qtek2020/iMate.
It is all dependent on the max. data-transfer rate of your SD-card.
I can run from SD fine, IF I do not use POI.
BTW: I dont see the advantage for MDAII/XDA2/Qtek2020/iMate to run completely from SD. With every Hard-reset you will have to re-install because of the tiny bits that are installed in main memory.
For XDA1 I can imaginge that limited memory space is a reason.
tomtom on sd
i have tomtom on my sd!
it can be done!
The app and all components in their own folders on the sd!
From my experience installing TomTom on the SD card does not seem to work to good…
Poor performance huh!!!!
hmmm not sure about the poor performance!
Could you advise me of what I will gain by adding TomTom3 to my XDA rather than my 512mb SD card?
I would love to know what I am missing out on speed wise! :lol:
After a short amount of time TomTom just starts to slow down and then dies!! - Installing TomTom into Main Memory or Storage/ExtRom works fine...
Jimbob, are you saying that you could remove your sd card and have a complete install of tomtom 3 on it, if you try the sd in another phone/pda I think you will find errors thrown up because files will be missing.
...
cruisin-thru
You are correct!
I have tried it! it works fine!
merlin_uk
*********************!
Thats not how it works!
If you had any shred of brains, you will know that processes only run as quick as the item they are running on!
As long as all other apps and utils are not running, TomTom will run at full capacity!
Dont listen to merlin_uk he knows not***************************
-------------------------------------------------------------------------------------
JimBobUK, please remove your comments towards myself from this post:
http://forum.xda-developers.com/viewtopic.php?p=61794#61794
I was only talking from my experience... there is no need to be nasty!!
If your comments are not removed I will report this post to the moderators.
------------------------------------------------------------------------------------
JimBobUk, there are other ways to point out that someone is wrong. Merlin was not offensive, so no reason for you to react like that.
now for the issue:
My experience is that TomTom can lock-up IF the data transfer rates of your SD-card are not high enough. I experienced this. It has nothing to do with TomTom itself, but with the maps/poi files.
I would like to know HOW you did install tomTom on the SD card completely. When I tried it I noticed some bits that were installed in main memory. Also the registry settings are in main memory. THIS means that if you put your SD-card in another (similar) device TomTom wont work. Also, after a hard-reset TomTom wont work.
These findings were reason enough for me NOT to install TomTom itself on SD.
Our US Editor is always looking for ways to install SatNav to memory cards and leave as much precious system memory free. He has been investigating which components of TomTom can safely be installed to a memory card and which need to remain in main memory.
His findings are about to be published in a short guide he has prepared on how best to achieve this with Tomtom Navigator. It requires some work and mods to the registry and there are parts of the install that need to be left installed in main memory if you want a stable system as well as registry entries etc.
It is not possible to install every element of TomTom Navigator to SD such that transferring the card to another device will allow access to TomTom.
i will put my card in another device that does not have TT3 installed and give you the results
......................
So there’s no confusion, I thought I would restate my experiences when installing and using TomTom 3 on an SD Storage Card…
When installing TomTom, for the application I specified that the installed location would be the SD Storage Card. Installation went smoothly and the following components were installed as follows:
Installed onto the SD Storage Card:
TomTom Navigator Voice
TomTom Navigator
Installed into Main Memory:
TomTom Wizard
TomTom GPS
What happens is that the components TomTom Navigator Voice and TomTom Navigator get installed on to the target specified during installation and components TomTom Wizard and TomTom GPS always get installed into Main Memory.
I then install the TomTom Maps on to the SD Storage Card.
The above installation all seemed to worked perfectly… but what I was finding was that when using TomTom in the car and after some time driving, TomTom seemed to slow down… what I mean by this is that the refreshing of the screen slowed down and began to become jerky… some time after this the device would hang which meant doing a soft reset (a little difficult when driving!!)
So I uninstalled TomTom and then reinstalled it, but this time I stated that the installed location for the application would be Main Memory, which meant that only the TomTom Maps would be installed onto the SD Storage Card. By doing this, it all seemed to fix the problem for me…. at the time I did not have time to investigate the reasons why I was having these problems, I just needed to have a working version of TomTom that I could rely on in the car.
The problem could not be anything to do with the number of processes running as I always made a point of closing everything first before running TomTom. Also if it was a process problem, then this would have affected TomTom irrespective of whether it was run from Main Memory or Storage Card.
My conclusion at the time was that it was not going to be suitable for me to run TomTom from the SD Storage Card, and therefore decided to install to Main Memory instead. This has recently changed, however, and I now run TomTom 3 from my Extended Rom which all seems to work great and frees up my Main Memory.
I hope this clarifies my experiences with TomTom 3.
Has anyone else got problems recieving phone calls whilst using TTN3 ?, my phone wont ring whilst TTN3 is running and i seem to miss all my calls,
Is there a solution to this at all ?
Cheers
merlin_uk said:
I now run TomTom 3 from my Extended Rom which all seems to work great and frees up my Main Memory.
Click to expand...
Click to collapse
Probably a silly question, but how did u install TT3 to ur X. ROM?
Smiley
smiley_thing69 said:
Probably a silly question, but how did u install TT3 to ur X. ROM? Smiley
Click to expand...
Click to collapse
When you run the installer you choose 'Storage Card' rather than 'Main Memory' but this does not install everything to storage card.
We will be publishing an in-depth guide to how to move everything that can be safely run from the storage card shortly at PocketGPSWorld. There are a few small files that need to be left in main memory to ensure stability.
smiley_thing69 said:
Probably a silly question, but how did u install TT3 to ur X. ROM?
Smiley
Click to expand...
Click to collapse
I used the ExtendedRom Unlocker to gain access to the ExtRom, the download can be found here:
http://forum.xda-developers.com/download.php?id=567
I then copied the content from the ExtRom to my SD Storage Card and then deleted everything from the ExtRom.
When reinstalling TomTom you should now be able to select the ExtendedRom as the target installation location...
TomTom SD Card Install?
Hello,
Does anyone know whether it's possible to put an install for Tom Tom onto an SD Card?
I've got to install TT onto like 70 M1000s then ship them out. I'm concerned that the battery may die in transit and main memory will be wiped. In which case TT will need re-installing :evil:
I've gotta get an activation code for each copy of TT before installing it onto the M1000 and the install takes over 30mins
With activesync I'm not able to install it onto more than one unit at any one time but if I could copy the files direct to SD card and run the install from there I could save myself a lot of time and hassle! Plus if the battery runs out I could fire up the install and everything would be sweet.
My concern is putting the install onto the SD card and passing the activation code to it.
If anyone knows an answer to this I'd be grateful for some pointers!
Thanks
I already have an SD card in my XDAIIi which NEEDS to be in the device in order for some applications to work.
However, I also need to install TomTom5. The versions of TomTom i have received are all on SD cards.
So, i have copied the content of the tomtom SD card, to my own SD card (keeping the file names/strcture the same).
I have installed tomtom5 using the cabs in the 2577 folder. When i go to activate it using the key provided in the box, it doesnt work.
I get an error telling me that the activation code is not correct.
Has anybody else tried similar, or know of any reason why this wont work?
This is doing the same thing on 3 copies that i own.
Any thoughts, or methods to get around this?
Im not trying to steal/distribute/crack the version, i only want to move the files to another place for my legit version.
I have contacted tomtom but they always take ages to reply.
I managed to copy all the tom tom stuff to my own SD card without any problems. I did an install of tomtom 5 to device, upgraded to 5.21, then I copied all the folders on the tom tom SD card to my own SD card. I then deleted some folders I reckoned I didn't need from my own SD card so that the only ones I'm left with are:
great britain map
licences
tomtom
voices
zip
Hope that helps.
Did you find a method to do it without installing from the original SD card first?
The problem I have is i am going to be handing out 650 devices with SD cards in them.
I want to put the install files onto the SD cards and setup a shortcut. If the owner of the device requires TomTom, they can install the application, then call the IT helpdesk to get a key/licence and to activate the product.
The probem i have at the moment is after doing the install, none of the valid licence keys seem to work.
I have found a method to get it working though, similar to your steps above. However when there are 650 devices in the field, you can imagine how many copies of tomtom they would lose on a spare sd card unless it was in their device all the time :lol:
I'm afraid I did the original install from the TomTom SD card.
Hi I have just bought Navigator 6(tomtom) for my SPV M5000.It works fine and dandy but I need to keep the tomtom SD card in.I`m sure there is enough room on the phone internal memory to install it permanately so I can the use my own 2gb storage card which I use for music etc.Also could I store the info on my storage card.If any of these are possible,how do I do it?
Regards,Carl.
Just copy the TomTom SD to your own. It's that simple and it's what I did.
Carl, welcome to the board.
Please read the board rules,
http://forum.xda-developers.com/showthread.php?t=221545
regarding using helpful topic titles. It gets you more help, more promptly, and prevents irritation of my mammaries.
V
i have a problem my htc tornado is to slow in my cele task it is 24.94m and in my home screen it is in 49%ram i install the windows live but i undelete because turn my phone slow. i have the [UPDATED to SP1] WM6 Platinum Edition 5.2.1711.18165.0.5.0 SP1 by nitrogen. give me some help please?
no body help
no body help me please i need help
Give more info please; like:
do you have memory card?
what programs you got installed?
where do you have programs installed (on the phone or memory card)?
If you don't have memory card then go buy 1Gb card on ebay they are cheap.
Then reinstall your rom and install all programs on that 1Gb memory and you will be fine.
Reset your phone, install your softwares and others in memory-card as far as possible , you can try .
this link might help
This tip frees memory in the phone, moving stuff to the card.
http://www.mvdirona.com/jrh/SmartPhone/MoreStorage.htm
Hello Everyone,
First post here.
I downloaded a .cab file I found online to enable sdhc support on my treo, but it only sees 4gb of my 8gb sdhc card.
Any ideas? I am seeing other files that I can download and try, but I don't want to screw up my phone.
Thanks for any help!
This has got to be an easy question, I see sdhc/4gb problems all over the place. Anyone have any ideas?