Related
Hi Guys and Girls,
Could any Aussies recommend me a polaris repairer in Australia need to get a new front face and glass, put a sheet of sandpaper in the same pocket as my polaris and well lets just say that im not going to get any splinters from my phone anytime soon
Cheers
How the hell did you sandpaper your screen?! (out of curiosity). I think you may need a new screen for it, depending on the damges!
picture of the screen would be interesting...
the screen feels very gentle interesting how it looks now
Good news is the part you need (it's actually the digitizer) is about $35AUD on ebay... bad news is you'll probably spend an hour changing it but if you take it slowly you should be ok
Thanks for the reply guys, so is the very outer glass the digitizer? I would have thought it was just a face plate guess i'm wrong. To answer some questions Bobby.pike - A long story - Heres a short version at work put my phone in left shirt pocket and small tools i am using in right shirt pocket, left shirt pocket got wet (phew!! that was close I said to myself) transfered phone to right pocket out of habbit continued putting tools and sandpaper in same pocket 12 hours later presto!!!!! sand papered screen bnm7bnm - screen looks kinda like the top of a finger nail you cant pick out the individual scratches its just not clear any more but it feels horrible sending a sms is kinda like the feeling some people get when they scratch their nails along a blackboard (no im not obsessed with my fingernails both examples just led that way somehow?)
Yep the outermost glass is the digitizer
So yesterday I went out to dinner, grabbed my trusty TP2 and put it in my pocket (uncracked), reached out location and pulled it out (cracked). I know there was no impact between the two locations as I simply sat in a car the whole way.
Anyone else have something similar? Glad I have insurance, that's for sure.
Is it possible you had the screen facing out in your pocket? What I mean by that is when I keep mine in my pocket I make sure the screen is against my leg and not facing forward.. Either way, good thing indeed that you have insurance..
it is, but its a coat pocket. I Just couldn't believe it happened as I've had a touch screen phone for the last...3 or 4 years without issue.
if you have made fun of someone that has a case on there hip that is why it happend to you if not then its bad luck.
do you really believe that crack could appear after no physical impact?
I've seen crazier things happen. My one thought was that its quite cold here right now. Either way, I definitely didn't have any impact that I felt, which shouldn't be enough to crack a screen like this did. I just expect more out of HTC I guess.
A screen protector like invisible shield would help i have it on mine...only thing i hear is that when used in ur pocket it can pick up a lot of lint but so far mine hasn't had that problem. any little bit of dust i see on it i just rub it off
I've got ghost armor, when they get back in stock and i claim my insurance i'm going to start using a slip in case.
football0552 said:
So yesterday I went out to dinner, grabbed my trusty TP2 and put it in my pocket (uncracked), reached out location and pulled it out (cracked). I know there was no impact between the two locations as I simply sat in a car the whole way.
Anyone else have something similar? Glad I have insurance, that's for sure.
Click to expand...
Click to collapse
Yep. A couple of days ago I got into a car, the TP2 in my pocket (which was hanging...unzipped jacket) closed the door and crack! Lovely cracks spread across the screen of my beloved and not even 30-day-old TP2.
I should have known better, The same thing happened to one of my Moguls earlier this year. The weird thing is, the TP2 still works perfectly. I tried to get a return authorization, but Sprint referred me Assurion, which means $100 deductible. The only good thing about it is that the TP2 is so new, they don't have any refurbs to send out, so I'm getting a new one, with one year warranty. From now on, cases only... no pockets!
Not sure what happened in your case,
A: My assurion deductable was $39... I could have sworn it was $89.
B: I need to find a good stiff slide in vertical case that I can just slide the phone into and out of in my pocket.
C: Assurion says they'll get my phone to me Tuesday (i.e. out Monday).... either they're full of cow chips or they purchased a stock just in case since Verizon is apparently trickling in shipments.
what was the temperature outside ?
if it was decently cold, and your phone was cold as well, cold things always crack easier, especially with a screen this big. smaller the screen, harder it is to break.
haha, well it was cold for this time of year. nothing terrible. about 20 degrees F. I know the size matters, I just couldn't believe it cracked so easily so I was really just fishing to see if its a possible problem. My replacement will be here today and i've been trying to find a good STIFF slide in vertical case I can just keep in my pocket.
I live in Canada and on occasion it gets down to -25 degress c here (-13F)
and I have left many cellphones out in the cold, with no ill effects (although screen response can slow down dramatically while it's cold)
the only thing that would crack it is a dramatic change in temp. over a short period of time, like 80 to -5 and I don't even know about that.
a screen skin is NOT going to prevent cracking, only scratches, the LCD glass is on the inside of the device and a think film doesn't add anything to stability.
my guess is it got flexed are banged in the wrong spot. possibly a few days earlier which weakened it and then lightly banged again when you put it in your pocket...
of course a defect in the internal glass is possible, when you get in to mass production of a product there are bound to be some defects.
mine on the other hand has traveled 10 feet across from say 4 feet up and hit pavement with no more than a 1mmx3mm indent on a corner.
it's in general a well build device (but boy was I sick when that first happened)
My advice, if your insurance costs money.. bring it in with a little story.
"I was sitting at a table and typing away I closed the keyboard, and I couldn't believe it a crack appeared across the screen"
As long as it is a solid crack across the screen with no obvious point of impact, I am pretty sure you will get away with it.. even with out insurance.
Football, Telus here in Canada has a thin hard plastic case for 15 canadian.
it will even prevent your screen from getting scratched. and makes that annoyingly placed "power"/screen blank button harder to push. I am pretty sure all the cdma devices are the same, but I don't know 100% I ordered a verison screen protector, and it fits. but the tolerances aren't as high for that
I had the same thing happen to me just a week ago. Slid it into my pocket and not even three minutes later, pulled it out to use the phone and had fresh cracks spreading across the screen. The phone did not come into contact with anything... Still a mystery to me as to how it happened!!
BTW... If you were looking at the phone in the upright position, the screen cracking started from the left middle of the screen and made it's way across to the bottom right corner. Just wondering if anyone else has had the same pattern.
twasnow said:
I live in Canada and on occasion it gets down to -25 degress c here (-13F)
and I have left many cellphones out in the cold, with no ill effects (although screen response can slow down dramatically while it's cold)
the only thing that would crack it is a dramatic change in temp. over a short period of time, like 80 to -5 and I don't even know about that.
a screen skin is NOT going to prevent cracking, only scratches, the LCD glass is on the inside of the device and a think film doesn't add anything to stability.
my guess is it got flexed are banged in the wrong spot. possibly a few days earlier which weakened it and then lightly banged again when you put it in your pocket...
of course a defect in the internal glass is possible, when you get in to mass production of a product there are bound to be some defects.
mine on the other hand has traveled 10 feet across from say 4 feet up and hit pavement with no more than a 1mmx3mm indent on a corner.
it's in general a well build device (but boy was I sick when that first happened)
My advice, if your insurance costs money.. bring it in with a little story.
"I was sitting at a table and typing away I closed the keyboard, and I couldn't believe it a crack appeared across the screen"
As long as it is a solid crack across the screen with no obvious point of impact, I am pretty sure you will get away with it.. even with out insurance.
Click to expand...
Click to collapse
To keep it short, I know, I know, I know, and I know. lol. (Just for an interesting note, being in South Dakota for College I've had it around that cold without a windchill... walking to class and having your eyelashes freeze in a block sucks.)
I was more or less just trying to come up with the most plausible excuse even though I was sure (99.999%) it wasn't the cold. It just completely blew me away that I pulled it out and there was cracks across the screen because at the point I hadn't even dropped the phone and as previously mentioned I wasn't leaning or really touching anything while riding in the car.
Also, generally its not actually glass that's on resistive touchscreen's as far as I know. I wasn't trying to insinuate that the screen skin would help stability at all (actually stiffness... don't get my started about this I've been dealing with stiffness matrices WAY to much lately in class).
I agree in general it seems quite well built, and agree if my case is isolated but I was wanting to make sure it was. A point of note is that the crack originated on the far right side and propogated in a couple of lines across the screen. Really my guess is that the method they use to connect the "glass" (a plastic..?) produces some residual stresses around the edges of the material.
Finally, where do you get the case you have? I really just want a slip case as I mentioned that is pretty stiff so that anything that may possible break the screen gets spread out over the area of the case. I am trying to stay away from a snap on hard case as I find them bulky, get your device dirty, and really don't protect what I want to protect.
Thanks for your input.
wbchristmas said:
I had the same thing happen to me just a week ago. Slid it into my pocket and not even three minutes later, pulled it out to use the phone and had fresh cracks spreading across the screen. The phone did not come into contact with anything... Still a mystery to me as to how it happened!!
BTW... If you were looking at the phone in the upright position, the screen cracking started from the left middle of the screen and made it's way across to the bottom right corner. Just wondering if anyone else has had the same pattern.
Click to expand...
Click to collapse
mine cracked middle right and propagated in a crack more or less horizontally across the device and another at about a 45 degree angle towards the bottom of the screen. The instances sound similar just reversed.
The reason your screen cracked was most likely it pressed up against the seatbelt buckle. I have had this happen a couple of times. When driving now I ALWAYS take my phone out of my pocket or remove the case from my belt. As I said, a couple times I left it there and when I buckled up, the buckle of the seatbelt was pressed against my right hip. A little bit of pressure, like from stopping the car, is enough to crack the glass.
So word to the wise, do NOT leave your phone in your pocket or on your belt when you get into a car. Or if you do, put it on the side of your body that is facing away from the seat belt buckle.
docgiggs said:
The reason your screen cracked was most likely it pressed up against the seatbelt buckle. I have had this happen a couple of times. When driving now I ALWAYS take my phone out of my pocket or remove the case from my belt. As I said, a couple times I left it there and when I buckled up, the buckle of the seatbelt was pressed against my right hip. A little bit of pressure, like from stopping the car, is enough to crack the glass.
So word to the wise, do NOT leave your phone in your pocket or on your belt when you get into a car. Or if you do, put it on the side of your body that is facing away from the seat belt buckle.
Click to expand...
Click to collapse
Haha, I already do this. Actually, I was in the passenger seat and the phone was in the right pocket of my fleece jacket. I'm just the jacked it what damned me because normally when I put it in my pants I have the screen facing my leg.
Is this something that asurion will cover?
Recently received the Phantom Skinz Full Body set and have gone through installation.
Here's the breakdown:
The Pros:
- The Screen Skin looks good and feels good. The extra drag vs. the stock glass is slight and the overall clarity is very good (doesn't have any noticeable detraction from the crisp, contrasty screen).
- The main screen skin and front overlays were fairly easy to apply and once dried have a very nice unobtrusive look
- Comes with 2 sets of skins
The Cons:
- included directions are WAY OFF from the install video on their site. Soaking times, how long to let it sit and dry, etc...
- Edge bubbling on every corner for the back overlays. Directions say to "cup the corner with palms and hold 30 seconds", but I've done it over and over again and they keep popping off after a short while
- A WHOLE LOT of wet work involved in applying these skins. Application involves soaking the skin in water first, then (as instructed) with your fingers fully wet, take the wet skin and put it wet onto the phone and then use the included credit card shaped "squeegy" to push out the extra water. Not so much a big deal for the screen skin, but getting that much water around and near the audio/mic/power and such ports while putting on the body skins is asking for trouble.
Final Thoughts
I imagine in some small (heck, maybe in large) part, the corner bubbling issue is due to me not applying the skin properly. But I'm not some clueless granny that doesn't know the difference between a mouse and a blackberry and the included instructions are vague in important places and almost completely different than the video instructions shown at their website (for example; The included instructions say to use warm water WITH SOAP)
Bottom line: Stick with just the screen skin, skip the full body.
The online video instructions say to use soap as well. IIRC, she said that at their facility, they use one drop of Johnson's baby shampoo per 32 oz of water.
I would avoid Phantom Skinz altogether. Here's the review I posted about my experience with one of them on my Moto Droid in the skins topic.
Phantom Skinz
I got a PS for my Moto Droid because I didn't want something as grippy as the Zagg. PS had great reviews and came with 2 full sets for the price of 1 zagg with 33% off on top of that ($16.50 in the end). The first installation of the screen got some dust and fuzz under it since I was OCD about getting it perfect, so I emailed them and they sent me a replacement for free no questions asked. I know it did come with two sets of protectors but I wanted to keep one as a backup still. Second installation was perfect. No dirt, dust, fuzz or finger prints. Screen was perfectly smooth (no orange peel) and the touch felt almost the same as the glass. Put the rest of the body on without a problem as well with just a few bubbles in some of the tougher spots. I was very impressed, but now a month later I am not so much. After daily use taking my phone in and out of my pocket (sometimes shared with keys) the skin is filled with knicks and wrinkles. While the film may not technically scratch, it is vulnerable to indentations and air bubbles forming which do not "self heal". Instead of scratching, it seems like the skin stretches in place, resulting in a wrinkle/groove with little marks that look like air bubbles underneath. Not only does it make the screen look dirty, but you feel them while using the touch screen. As I write this, I just dug my finger nail into the screen and tried to scratch it, leaving another permanent groove. Needless to say, I will be taking off the PS and throwing it in the trash. The rest of the body has surprisingly stayed pretty clean of wrinkles, so it may have something to do with its application on glass. I will put some pictures up when I get the chance this evening. Overall, I would not recommend PhantomSkinz. It looked and felt great for a couple weeks, but now every day I am finding more and more knicks and wrinkles and that is just unacceptable compared to others. This skin is NOT scratch proof like other comparable skins on the market! However, I will commend their customer service for being very helpful and quick to reply.
And here a pictures of what it looks like:
h ttp://forum.xda-developers.com/showpost.php?p=5415251&postcount=44
(remove the space after the h, I can't post links yet)
Bottom line here as that they are smoother than other brands but scratch pretty easily. You should check back in on this topic in a month or two and see if your opinion has changed.
I applied the full body skin about a week ago. There's definitely a lot of water involved but most of the danger can be avoided with some caution. I used Q-tips to do a lot of the credit card work around the edges so that it soaked up the water it pushed out.
A good trick for the corners is to use some sealant/piping tape to hold them down. This is a lot better than using your hand for 30 seconds, and you can leave it there for as long as you want (I left the tape on mine for 2 days since I wasn't going anywhere that I needed to show off my phone, I figured why not? Now my corners are perfect).
So far I like PhantomSkinz because it wraps the corners a little better than the other skins. Bodyguardz is a little better in clarity and material. InvisibleShield has too much of the orange peel effect. Haven't had a chance to try BestSkinsEver.
As for detonation's review, it's too early for me to tell if I'll have the same problems, but I agree that the material doesn't seem on par with InvisibleShield or BodyGuardz. But since I still used the carrying case and treat my phone with much care even with the skin on, I don't think it'll be too much of a problem.
I recently got the phantom skinz full body set, after I read the instructions I thought that there was no way I was applying wet/soapy film to my N1, it just doesn't make any sense. Water/soap plus electronics? Its a recipe for disaster, besides the fact that I suck at arts and crafts type stuff just like this. I would imagine I would get water somewhere inside the device, and knowing me it would reach the many water detectors in the phone. It doesn't seem worth it, so I applied just the screen part sans water/soap, and needless to say it sucked big time, even when I got all the bubbles out.. it had a terrible gray haze on parts of the screen it was bad (maybe due to not using the water/soap method). Can any one suggest just a simple screen protector that doesn't' require to dunk your device in water?
boxmander said:
I recently got the phantom skinz full body set, after I read the instructions I thought that there was no way I was applying wet/soapy film to my N1, it just doesn't make any sense. Water/soap plus electronics? Its a recipe for disaster, besides the fact that I suck at arts and crafts type stuff just like this. I would imagine I would get water somewhere inside the device, and knowing me it would reach the many water detectors in the phone. It doesn't seem worth it, so I applied just the screen part sans water/soap, and needless to say it sucked big time, even when I got all the bubbles out.. it had a terrible gray haze on parts of the screen it was bad (maybe due to not using the water/soap method). Can any one suggest just a simple screen protector that doesn't' require to dunk your device in water?
Click to expand...
Click to collapse
Dude... you BARELY have to use any water to get the screen to turn out right. Sorry you wasted your PS... but ask them for a replacement, and mail it to me! I do this **** with my eyes closed. It's really not rocket science, and you don't have to "dunk" your phone in water.
boxmander said:
I recently got the phantom skinz full body set, after I read the instructions I thought that there was no way I was applying wet/soapy film to my N1, it just doesn't make any sense. Water/soap plus electronics? Its a recipe for disaster, besides the fact that I suck at arts and crafts type stuff just like this. I would imagine I would get water somewhere inside the device, and knowing me it would reach the many water detectors in the phone. It doesn't seem worth it, so I applied just the screen part sans water/soap, and needless to say it sucked big time, even when I got all the bubbles out.. it had a terrible gray haze on parts of the screen it was bad (maybe due to not using the water/soap method). Can any one suggest just a simple screen protector that doesn't' require to dunk your device in water?
Click to expand...
Click to collapse
you didnt follow the instructions and it didnt work well for you? gtfo
boxmander said:
I recently got the phantom skinz full body set, after I read the instructions I thought that there was no way I was applying wet/soapy film to my N1, it just doesn't make any sense. Water/soap plus electronics? Its a recipe for disaster, besides the fact that I suck at arts and crafts type stuff just like this. I would imagine I would get water somewhere inside the device, and knowing me it would reach the many water detectors in the phone. It doesn't seem worth it, so I applied just the screen part sans water/soap, and needless to say it sucked big time, even when I got all the bubbles out.. it had a terrible gray haze on parts of the screen it was bad (maybe due to not using the water/soap method). Can any one suggest just a simple screen protector that doesn't' require to dunk your device in water?
Click to expand...
Click to collapse
Try clairivue or martin fields. Just do a google search since I can't post links yet.
typ_ex said:
you didnt follow the instructions and it didnt work well for you? gtfo
Click to expand...
Click to collapse
LOL! i agree. i have had no issues at all with my phantomskinz- both on the magic and now my nexus- i'll admit i do suck at installing them but what i do is get a bowl o water, put a few drops of baby shampoo in swich it around a bit, then dunk the piece in there- hold it over bowl until excess is removed then you can put it on device- the soap/water allows you to move it into position easily and helps squeegee the bubbles....
i wouldnt blame a product because you didnt follow their instructions how to install it...
I actually prefer the bowl of soapy water to the sprays that come with other skins. Submerging it ensures the entire skin is lubed up, and the small amounts of drips on the device is harmless. Just let it dry out overnight before turning it on.
I think Martins is completely over priced. I tried BSE and Phantom and all works great. Once dried it is practically invisible with only the slightest orange peel effect. I'm pretty OCD and it is minimal enough that it doesn't bother me. What does bother is that both of the screen protectors are slightly shorter than the screen.
As for applying the phantom and drowning in water as people are saying I don't do that. I've put on enough of these to know you only need a slight amount. I use a spray and just mist the backing so that it is enough to be able to adjust when putting on but not dripping with water. I use a cloth to absorb the water on the edges as I push the bubbles/excess water out. Fairly easy process. It just takes a slow hand and patience.
pongalong said:
A good trick for the corners is to use some sealant/piping tape to hold them down. This is a lot better than using your hand for 30 seconds, and you can leave it there for as long as you want (I left the tape on mine for 2 days since I wasn't going anywhere that I needed to show off my phone, I figured why not? Now my corners are perfect).
Click to expand...
Click to collapse
Ok I have to ask: what is sealant / piping tape? And where do you buy that? Home Depot? Bed, Bath and Beyond?
Paul22000 said:
Ok I have to ask: what is sealant / piping tape? And where do you buy that? Home Depot? Bed, Bath and Beyond?
Click to expand...
Click to collapse
Some might know it as teflon tape, thread seal tape or plumbers tape. It's a thin white non-adhesive tape that you use on pipes/hoses to make connections water tight. Home Depot would have it or any hardware store - it's pretty common. Just cut a few good length pieces and wrap your phone up like a mummy on the difficult spots. It works well because it's stretchy, conforms to shape and naturally adheres to the phone skin.
pongalong said:
Some might know it as teflon tape, thread seal tape or plumbers tape. It's a thin white non-adhesive tape that you use on pipes/hoses to make connections water tight. Home Depot would have it or any hardware store - it's pretty common. Just cut a few good length pieces and wrap your phone up like a mummy on the difficult spots. It works well because it's stretchy, conforms to shape and naturally adheres to the phone skin.
Click to expand...
Click to collapse
...and it's non-stick!
typ_ex said:
you didnt follow the instructions and it didnt work well for you? gtfo
Click to expand...
Click to collapse
Like I mentioned before, my application didn't work well cause I didn't follow the instructions. And I wasn't hating on PS, get a grip. Besides after some people posted about this topic I might give it another go, PS gave me two for one so I can redo it. Why are you here? Perhaps you should try posting things that are more constructive.
pongalong said:
Some might know it as teflon tape, thread seal tape or plumbers tape. It's a thin white non-adhesive tape that you use on pipes/hoses to make connections water tight. Home Depot would have it or any hardware store - it's pretty common. Just cut a few good length pieces and wrap your phone up like a mummy on the difficult spots. It works well because it's stretchy, conforms to shape and naturally adheres to the phone skin.
Click to expand...
Click to collapse
Interesting. I'll definitely get some. Thanks for the tip.
Hmm... I'm going to go to Home Depot to buy some kind of special tape I've never heard of to wrap up my phone like a mummy in order to prevent the corners from lifting on my phone's skin protector. Phone enthusiast or what?
Phantom does have the best skins by far...
The trick to installation to make it perfect:
Use the Johnson's/water mix as they advised.
Ignore all of their other directions.
Peel off the piece you want to apply. Dryly.
Dip your fingers in the water and apply it to the skin using your fingers.
Once both sides of the skin are wet, use your fingers as a squeegee to pull off any excess water.
Apply the skin to your phone. Keep the skin sitting on your phone in it's original shape.
Use your fingers, not the applicator card, to squeegee out the air bubbles. You don't need to apply very much pressure at all. The bubbles move around extremely easily.
Now, let the skin dry for about 2 minutes. Once you notice the skin starting to cling to the phone a little harder, grab the ends that you need to wrap around the phone and stretch them into place. This is the key step. Stretching it makes it stick so much better, the corners align perfectly with the phone when you do this, and all the gaps left between the skin pieces when you don't stretch it are gone. The skin has to be stretched to fit the phone, otherwise the pieces will all be a little to small and the corners will blow.
Repeat with the other pieces.
Enjoy your sexily phantom skinned N1.
anyone with pics of this case ?
I just wanted to comment about Phantom Skinz because I have had a really good experience with them and I am going to get another set from them as soon as they release it for the HD2!
I got Phantom Skinz for a Nano about a year ago and it has been awesome! I bought the PS retail (they have a location in my area) so I only got one set, but I did it myself with no problems. I had to take it off for a warranty replacement on the Nano and I put the same skin back on the new Nano and it looks just as good as it did on the first application. It's awesome that it can be taken off and put back on again using only water.
I got GA for my G1, but it is the worst product ever. I had it professionally installed at a Ghost Armor location because I wanted it to be perfect for my baby. But it didn't even last a month before it started peeling! GA can only be applied once with a special solution (thats what the GA salespeople told me) and it can't be fixed with water like Phantom Skinz. Phantom Skinz has never actually peeled like the GA did, but at least I could fix PS with water if I needed to!
I literally had the full body GA skin replaced 4 times in the course of a year because it peeled so bad and I am not just talking the corners! I did everything they told me to; keep the phone in a case so it doesnt rub in your pocket, keep any liquid of the phone (durr), don't leave the skin in prolonged sunlight, blah bla blah.
It was $35 for the original GA skin and installation and then they charged me $10 labor for the "free warranty replacement" every time I had the skin redone. Oh, and they changed the GA product for my phone 3 times out of the 4 I got it replaced and the changes never fixed any of the problems I had with the skin. GA also yellowed really bad and actually got progressively worse over the course of their " improved product revisions". The last time I had the G1 wrapped the skin was a pretty moderate yellow in about a week...
The salespeople sucked me in every time with leading me to believe the GA skin for the G1 was revised and the problems were fixed. I spent way too much money on their crappy ass product!
Ghost Armor is an awful product! Please just stay the hell away from them!
There is no need to submerge anything in any fluid. I have installed clear skins on many devices by using soapy water. I dont spray it on the phone, I spray a small mist on the protector before applying. Trust me there is not enough water to damage anything because as i push out the bubble I wipe the water.
If you are concerned about it then remove the battery and wait a day like the other people have suggested. once the process is complete the skin will need to settle for a few days before it looks good.
I used some spray that came with a skin before and I did not like it compared to the soapy water MIST.
I also do not use the skin on touch screens because my finger drags on it compared to other screen protectors that are designed to protect the screen.
Anyone tried one of these yet?
Got on on order so ill let people know once i get it!
EXIM ones are pretty good - well my experience of them have been fab. Used either those or Martin Fields for all my past phones and cameras etc. Going to try the official HTC ones this time but if they're no good will definitely be going back to EXIMs.
I have used loads of them with my old phones just had the is spot if bother when they haven't fitted when just new on the always been given a new one that does fit eventually. Just wanted to know if anyone had tried one for size?
love exim, had one on my treo 750, ndslite lasts forever and nearly scratch proof. so for those who prefers to spend $1 and buy 10... trust me, exim is way better. i buy cheap ones for camera, gps etc. got one of those $1 for my g1 and after i applied, i gave it a wipe with the cleaning cloth and it scratched it already. pathetic plastic.
yup i ordered a spoc by accident then ordered a spuc - as i was about to apply it i got a call and screwed me up.... tones of dust. washed it then reapplied and spent the next 20mins with scotch tape - lifting the protector and taping the dust off =/ got most of it off... few specs. still got the spoc so will use that after 2 yrs or so.
i applied an exim 8.9" protector on my netbook perfectly NOT ONE spec of dust.. curse the ex gf for ringing - she must have known i was doing something delicate, then has the balls to accuse me of ignoring/hanging up on her... women
edit: oh and the fit... its not cut exactly. it's perfect width edge to edge - took me 3 goes to line it up. the top fits perfectly but the bottom is short about 1mm... only cos the corners aren't rounded as the screen is so i had to lift it higher so 2 corners didnt stick out. got it from pda-now or eximstyle (same ebay shops under 2 names).
Just to let you hys know i have had the same problem, good screen protector but doesnt match the bottom profile of the screen, i have let PDANOW know with pics so hopefully they will sort this problem out. it is doing the job atm tho.
Hello fellows, many people have seen the video of JRE on youtube where he destroyed his ROG 5 very easily by bending and cracking it with only 4 fingers used.
Now i want to talk about this issue here, because i plan to buy this beast. Has anyone problems with the stability of the frame? Or is this issue by far not as problematic as JRE makes it out to be?
Einheit-101 said:
Hello fellows, many people have seen the video of JRE on youtube where he destroyed his ROG 5 very easily by bending and cracking it with only 4 fingers used.
Now i want to talk about this issue here, because i plan to buy this beast. Has anyone problems with the stability of the frame? Or is this issue by far not as problematic as JRE makes it out to be?
Click to expand...
Click to collapse
JRE applies pressure with the 2 thumbs in the center of the phone and the remaining fingers on the sides of the phone.
In real life it is only by bad luck that you can repeat the conditions of that test, if you sit on top of the phone the contact area is much greater than the point exercised by the JRE.
It is a test for the show where there are clearly mobile phones with better construction design than the ROG 5, but this one is also very robust.
have the least esteem for the phone and everything should be fine.
I haven't had mine long, but I have dropped it three times (it's very big and doesn't fit in my pocket well, so when I crouch/bend over it falls out of my pocket):
- 2 feet from pocket to soil while gardening
- 2 feet from pocket to hard tile while cleaning
- from the top of my desk to the carpeted floor
There has been no damage to the phone from these drops. I'm waiting on a bumper case to arrive, which should help prevent problems from future falls. I'd like to attach the phone to my pocket somehow so if it falls out, it doesn't drop far.
I will say that the disadvantage of a phone this large is that it falls out of my pocket more often.
The reality is this is the most durable design among the gaming phones imo. There are
- no moving parts (cameras, triggers, vents) that would jam or get stuck or burn motors
- no openings for vents that would let dirt or pocket fluff or sand or whatever inside the phone
Also the bend test isn't a realistic use case, it's more of a spectacle. A realistic test would be sitting on it on the sofa or crouching with it in your back pocket. That I would be more interested in.