Are that incompatibles?
the BT of my wizard works only with Broadcomm Stack Bluetooth in WM5 or 6.1.
Now i've installed the favolous rom CR96 Touch HD Win 6.5;
Installing the Widcomm Stack BT too, the wizard restart continually.
It's necessary a hard reset to work.
exist some tricks?
Thx
Daniele
hi there
Dansen said:
Are that incompatibles?
the BT of my wizard works only with Broadcomm Stack Bluetooth in WM5 or 6.1.
Now i've installed the favolous rom CR96 Touch HD Win 6.5;
Installing the Widcomm Stack BT too, the wizard restart continually.
It's necessary a hard reset to work.
exist some tricks?
Thx
Daniele
Click to expand...
Click to collapse
hard reset=losing all programs you have installed on a "fresh"ROM (in other words is like "cleaning" the ROM, on easy terms XD)
so i suggest you try reflashing the ROM, dont install the Broadcomm Stack Bluetooth (never worked on mine) and trye the bt normal connection...
Good luck
Related
Hi All,
Has anyone got the Widcomm stack working on the Magician (Jam etc)?
The 1.5.0.8 stack worked both under WM2003 and WM2003se on an MDAII but doesn't work on the magician.
Does the magician use a different bluetooth module ? Is it possible to adapt the registry?
Any help in getting this working, or any other solutions to get the magician connected to a BT Access point would be very much appreciated.
Thanks in advance,
Martin
WIDCOMM STACK
I ALSO NEED THE WIDCOMM STACK FOR THE MAGICIAN
WHY DO THESES MANUFACTURERS ALWAYS COME UP WITH THE APPALLING ALTERNATIVE BLUETOOTH STACKS
DID NO ONE LEARN FROM THE XDA 2 !!
WIDCOMM IS GREAT EVEN ON THE HP 6340.
Working BlueSoleil BT Stack
I think this is what you're searching for...
It works for me.I'm using 1.13 radio, 1.13 Rom, no ExtRom.
It hasn't got 60 days evaulation, and added a Bluetooth switch to switch BlueSoleil Stack to MS Stack and vice versa, if you want to.
Try it and post the result...
Re: Working BlueSoleil BT Stack
I have problem with it. The blue diod is not lighting.....I dont know, what I going to do....HELP PLEASE!!!! The starck is running, but it dont work.....HELP....
Re: Working BlueSoleil BT Stack
How I network BlueSoleil stack with Widcomm.
Re: Working BlueSoleil BT Stack
sejra said:
I have problem with it. The blue diod is not lighting.....I dont know, what I going to do....HELP PLEASE!!!! The starck is running, but it dont work.....HELP....
Click to expand...
Click to collapse
The led does not work but bluetooth itself does. I have no led too, bluesoleil runs pretty ok for the things it must do.
Re: Working BlueSoleil BT Stack
HyperMalac said:
I think this is what you're searching for...
It works for me.I'm using 1.13 radio, 1.13 Rom, no ExtRom.
It hasn't got 60 days evaulation, and added a Bluetooth switch to switch BlueSoleil Stack to MS Stack and vice versa, if you want to.
Try it and post the result...
Click to expand...
Click to collapse
I think the bluesoleil does not support the phone BT headset, only the stereo BT headset. That's not much good for a Pocket PC phone.
Re: WIDCOMM STACK
jonboy8841 said:
I ALSO NEED THE WIDCOMM STACK FOR THE MAGICIAN
WHY DO THESES MANUFACTURERS ALWAYS COME UP WITH THE APPALLING ALTERNATIVE BLUETOOTH STACKS
DID NO ONE LEARN FROM THE XDA 2 !!
WIDCOMM IS GREAT EVEN ON THE HP 6340.
Click to expand...
Click to collapse
That is the Microsoft BT stack, when the Magician was on the drawing boards it was thought that the industry would go MS. Instead it went WIDCOMM.
The Magician could run WIDCOMM, but someone would have to write hardware drivers, and no one has. So no, it cannot be done. Too bad, the WIDCOMM works so well...
Thx
This file is 100% working fine with I-Mate JAM Black. Thx.
HyperMalac: ive tried that on my magician, but it wont work, it want me to configure the driver or something...
When installed, using BlueSoleil stack, a window pops up saying
"Your bluetooth device initialization fails! Do you want to configure it manually?"
If i select no it just shuts down and my blutooth is unusable.
If i select yes it wants me to select among a couple of options:
USB, BCSP, UART(H4)
and user defined, which forces me to select a dll, but i dont know which...
Ive tried all options and none works....
Help whit this is VERY MUCH appriciated!
EDIT: Now for which every reason, it worked, dunno what I did, but now I'll never switch back to MS stack!
I just got my JAM and the MS Stack doesn't work with my Audi MMI System BT. The PDA2K Widcomm stack 1.1 did, but not the JAM. I can partner but no functionality.
Has anyone tried using the MDA II/XDA II BT Tools that helped that devices MS BT Stack with the JAM?
I love the JAM, but the MS Stack has so little menu functions.
yes it works perfect for me ... the same functions in xda2
Having quite same problems with Nokia carkit, after pairing connection dies quickly and doesn't work. Under BT devices menu "set as hands-free" is grayed out and also using bluetooth tools doesn't make difference, the connection screen just disappears quickly when pairing so can't change profile, maybe it's due incompability...
Don't know if it's possible to change BT stack but at the moment this thing sucks...
GPS Navman 4410 on Qtek S100
Sounds like the same problem I have with my GPS-connection (Subject GPS)
Could someone post the Bluetooth Tools file? I can't find it anywhere on my system or on the web.
thanks
Paragon said:
Could someone post the Bluetooth Tools file? I can't find it anywhere on my system or on the web.
thanks
Click to expand...
Click to collapse
http://www.bluetooth.jazztel.es/
Thanks kha!
Tools doesn't work well on my JAM!
Hi!
I´ve tested the Pocket Bluetooth Tools as well, but it doesn´t worked on my MDA compact (German ROM). When the software was installed, the BT doesnt work anymore.
My special problem is with the Royaltek RBT 3000 and the download of the tracks to the pda. Each time i try this, the connection breaks after 200 waypoints approx. The normal use with the navigation software like TomTom works well.
Looking for a solution.
Regards
FluBeX
I've tried both Helmis and Ibashas 3.5 ROMS and they are brilliant, but I have one issue with both that I cannot solve.
How do I configure TT6 with BT GPS - I also use a BT headset.
Tried to follow the "old" TT5 manual for Universal and TT5 from this forum, but I cannot select outgoing port to 8.
I've tried outgoing port to 4 and program port 5 and it works ok.
Problem arises when I pair my BT headset also, if it is switched on, when I start TT there is no connection to the GPS, and consequently TT cannot find any satelittes.
Switch off the headset and restart TT and everything is fine again.
A few times it has happened that I get the BT pairing dialog box up after a while with TT started (headset on!) and has entered the passkey again.
So I wonder what settings I should use to be able to use both BT headset and TT6 with a BT antenna, anyone seen/solved this??????
I've tried 2 dif. BT headsets and 2 diff. GPS mice with both ROMS.
Best regards
/Henrik
Nobody experienced this or know how to solve it?
Waiting....
Ok, so nobody knows?
I will try on Buzznet then.
\HM
I read in tom tom website, tom tom 6 is not compatible with all device. For example in my case, I use O2 XDA II . Unfortunately tom tom 6 doesn't work with my device so I still use tom tom 5.21
Actually TT6 works exceptionally well with your device, which is the same as mine! - If it wasn't for this BT headset issue that is, it actually think it runs faster and smoother than it does on my JasJar!
But if you want to run it in landscape mode, you have to have either WM 2003 2. edition or even better WM5 in order to be able to use landscape (TT6 doesn't have that facility anymore).
And then you get the issue with the BT headset, which I reckon someone must know how to solve, even if it is a bit strange, nobody gives me any answers, not here and not on XDA-Developpers.
I would so much like to know if this is a known issue with this device and WM5, or if it is too trivial a question for anyone to bother to answer??????
selangkahlagi said:
I read in tom tom website, tom tom 6 is not compatible with all device. For example in my case, I use O2 XDA II . Unfortunately tom tom 6 doesn't work with my device so I still use tom tom 5.21
Click to expand...
Click to collapse
TomTom 6 works perfectly on my xda 2, you are obviously on about the backlight issue, which can be fixed easily
Ok, but can you use a BT headset also?????
Hello guys,
I am experiencing huge problems with my current ROM and these WM bulides (eg. the Ranju's - v7.4) here.
With my BT software, I am not able to use the "Service discovery" feature on my Qtek without pairing the devices.
Unsless I have with different ROMS, but not with a WM6 Smartphone (Samsung Blackjak) it seams to be a problem with WM Cores.
Can anybody help me out?
johnripper1 said:
Hello guys,
I am experiencing huge problems with my current ROM and these WM bulides (eg. the Ranju's - v7.4) here.
With my BT software, I am not able to use the "Service discovery" feature on my Qtek without pairing the devices.
Unsless I have with different ROMS, but not with a WM6 Smartphone (Samsung Blackjak) it seams to be a problem with WM Cores.
Can anybody help me out?
Click to expand...
Click to collapse
This is an interesting request. I have tried to make my universal work with A2DP using various registry hacks, but I can only get a couple of seconds of sound and then it cuts off. I swear it used to work last summer on a different ROM.
My guess is that changing the core might help.
Anyone can help?
I am not quite sure what my last rom was, but i think it was a 6 Pro Rom and I had the same problems.
YES,have Different Rom
Hi brother there's is a WM6 Roms of UNI with different BT stack,it is use Broadcomm bluetooth stack and work fine on my used,but in first you should know there have some bugs while you are picking up and ending the call with your BT headset's button,you should learn how to use it ,the roms link is
http://forum.xda-developers.com/showthread.php?t=291875 ,it made from helmi_C ,I am very glad to use these rom since i used HP 4150 before and the HP use broadcomm stack,it have great a2DP quailty and can use avrcp profiles. Think it can help you !!
Okay thank you so long.
This BT Stack is avaiable for seperate download as well, but I not sure it if works...
http://forum.xda-developers.com/showthread.php?t=342039
Does anyone know if it is possible to change the bt stack used in 6.1 back to the 6.0 one without downgrading to wm 6.0.
I have some strange problems with 6.1 and my bt car kit. With normal 6.1 stack my kaiser crashed after calling over bt. With 6.1 and jetware kaiser doesn't crash but I can't make outgoing calls over bt device.
With 6.0 I had none of these probs.
Hi,
I do have the same experience with my Vario 3 running WM 6.1 and the VW Premium Carkit which uses the rSap protocol...
Any solutions in the meantime with WM 6.1??
regards from berlin