Related
I bought a usb bluetooth dongle which used xtndconnect software, no joy at all with syncing my xda2, no serial profile that I could discern and basically all I could do was beam files back and forth. I saw on ebay a cheap usb dongle that supported voice gateway, there was no disc with it, just a link to download the widicom software from the sellers site, any way I installed it, I bonded my xda2 with the pc, the xda2 asked me did I wish to use my pc as a headset, I answered yes. I then went to bluetooth setup on xda2 and told it to use bluetooth activesync, it gave an error, saying "bond with serial profile" or something, I thought it was another brick wall dead end, then up popped a message, "activesync setup complete". I then opened activesync on the desktop and it works great. Also if I use my phone while in range of the pc it diverts the audio to my pc speakers and I can use my pc mic to answer. The dongle cost less than £20 in uk. I have to initiate sync by bluetooth on xda2.
The only thing I cant do is browse the web through the bluetooth even when synched, it insists on dialling a number. Can anybody give me the settings, pass thru works with usb connection.
I now have full internet access over bluetooth. I can even access it from downstairs while my pc is upstairs, solid connection, no dropping of signal and very fast compared to dialup over gsm.
Bluetooth
Cruisin-thru....
I have just purchased a class 1 dongle with 100m range, and use the software you mention through my laptop on windows XP Pro.
How did you set up the xda to web browse using bluetooth and your PC broadband connection ?
Regards
IT
I set up all the services I required, then on desktop of your pc click My bluetooth places, choose "my network access". After double clicking on that, click properties, there is a drop down box above "configure network adaptor" choose "allow internet access". Now as long as you are synced you can access the internet. When setting up activesync on xda2, make sure you havent bonded with any other item, go to settings/system/bluetooth, choose "activesync over bluetooth" make sure bluetooth is in "discover" mode beforehand, from there it should search and find the serial port on the pc and should work when you click activesync from programs, then at the bottom left options screen choose "sync by bluetooth". Hope this helps. I could not get any of this to work using another dongle that was using xtndconnect. By the way, the xda2 is very limited in its range for bluetooth regardless of the dongle on your pc.
cruisin-thru, many thanks for your help with Bluetooth Synch issues in these forums. Couldn't have done it without you!
I've just received my VOIP bluetooth dongle (Same as yours? PenBlue?) and got it working with ActiveSync and browsing the Interweb with the XDA2 over bluetooth. Awesome!
Can't work out how to get the network working, though. Scanning other topics here, there seems to be no way without installing the 'new' (Widcomm?) bluetooth stack on the XDA2, and enabling Internet Connection Sharing on the PC. I'd rather not clutter up the XDA2 with another BT stack, and I'm certainly not enabling ICS and buggering up my LAN settings here, just to get the network.
Can you suggest anything? You've been fairly quiet on this subject - wondered whether this PenBlue dongle makes it possible without all this dual-BT-stack skullduggery.
TIA
When I try to connect my Dash to my Mac it connects fine but there is something missing. In order to use my Dash as a modem for my Mac I need to pair them and so on. In the bluetooth set up, after I pair the two, I get to select which services I want my computer to use on my phone. The only service that shows on my computer is "address book" There should also be an option to "Access the Internet with your phone’s data connection" but it's not there. This is why I can't use my phone as a bluetooth modem. Why is this not showing up in the bluetooth set up? Is my phone not telling my Mac that it can be used as a bluetooth modem? My internet sharing settings and so on are activated and correct on my phone. Is it just my compter?
http://justinblanton.com/2006/01/mac-os-x-windows-mobile-bluetooth-modem
The seventh paragraph is where the problem is.
joshstte said:
When I try to connect my Dash to my Mac it connects fine but there is something missing. In order to use my Dash as a modem for my Mac I need to pair them and so on. In the bluetooth set up, after I pair the two, I get to select which services I want my computer to use on my phone. The only service that shows on my computer is "address book" There should also be an option to "Access the Internet with your phone’s data connection" but it's not there. This is why I can't use my phone as a bluetooth modem. Why is this not showing up in the bluetooth set up? Is my phone not telling my Mac that it can be used as a bluetooth modem? My internet sharing settings and so on are activated and correct on my phone. Is it just my compter?
http://justinblanton.com/2006/01/mac-os-x-windows-mobile-bluetooth-modem
The seventh paragraph is where the problem is.
Click to expand...
Click to collapse
The Dash has AKU3, which means it lacks BT DUN and only has BT PAN. This is why you don't see DUN, unlike with pre-AKU3 devices.
I'll publish a big article on all these questions in a few hours, where I explain all these questions in detail. Stay tuned!
Menneisyys
Is there a way to get a Tmobile dash paired with a G4 Mac Powerbook?
I want to access the internet on my powerbook via my Dash.
I see in your reply above you were going to write an article on this. I've not found out how to get this to work.
thanks for any help
John
I see the problem... basically Mac OS X doesn't support Bluetooth Personal Area Networks (PANs). Bluetooth Modems normally use DUN (which is what HTC devices used prior to AKU2... and was hacked to route into WModem).
With AKU3, MS standardized this. They went with PAN instead of DUN because PAN allows for IPNAT... enabling the device and the laptop to be online at the same time.
But, of course, Macs don't even see the PAN profile... meaning we're SOL right now.
P.S... testing this on my Blue Angel with AKU 3.5... same problem here.
hatoncat said:
I see the problem... basically Mac OS X doesn't support Bluetooth Personal Area Networks (PANs). Bluetooth Modems normally use DUN (which is what HTC devices used prior to AKU2... and was hacked to route into WModem).
With AKU3, MS standardized this. They went with PAN instead of DUN because PAN allows for IPNAT... enabling the device and the laptop to be online at the same time.
But, of course, Macs don't even see the PAN profile... meaning we're SOL right now.
P.S... testing this on my Blue Angel with AKU 3.5... same problem here.
Click to expand...
Click to collapse
Let's all hope the Widcomm BT hack will some day also have DUN support, even under AKU3+. See the Hermes / Wizard forums for more info on the hack.
DUN / PAN Problems with OSX
I know OSX doesn't support PAN, but check this site out --> http://mobilitytoday.com/news/007194/blackjack_mac_connection
It's a write up on how to get the Samsung BlackJack working with OSX, BlackJack I believe also use PAN.
I tried it, but wasn't able to get it to work. I have to leave the office right now, so maybe someone else might have better luck than I do.
-kz
working with p3600
It seems working with a P3600 using the new network sharing feature with the USB Cable! The mac sees a ethernet port (with ip already asigned by p3600)under systempreferences>network.
I donnu if its because i have missing sync (demo) installed that that connection just comes up...
cheers..
Update: Working on MBP CoreDuo...
I've got the dash, and I set it and my macbook pro to be discoverable, went thru the wizard on the mac side which found no usable services, then enabled the "internet sharing" app on my dash, and immediately selected the "join network with tmobile43" option on the bluetooth menu on my mac, and volia! i'm typing this to you via this connection.
Solid! Now if only bluetooth charged the battery
tmobile dash bluetooth modem problem
Ok this is wat i have to say i have a macbook and when i go to bluetooth setting it says in can use the kind of network interface that ur powerbook doesnt support and the reason ur powerbook doesnt support it is either u need to upgrade ur airport card or mabye upgrade to leopard like i did or do both because im running my macbook with the 802.11n wireless and bluetooth card and with 10.5 so that might be a solution to ur problem and i also know that u should upgrade to a macbook or a macbook pro if u want excelent peformance or heavily upgrade ur powerbook g4 and anyway wat are the specs on ur powerbook??
(macbook white 2.0 ghz 80gb hd and 2 gigs of ram)
sorry i put in powerbook for some reason i meant to say wat mac do u have
It seems to me that OS X (Leopard at least) wants to use the Network Access Point Bluetooth profile with Bluetooth PAN. I got it working with WM6.1 but I had to change Bluetooth PAN from PANU to NAT.
See ]Fixing 0803xx Bluetooth PAN on OS X 10.5.
NOTE: The thread number has changed from 382057(broken) to 373138 or go directly to the post.
UPDATE: Apparently the threads have been renumbered... or at least the thread with my post in it has changed... here's the link to the post: 2080487
I desperately need to get ICS over WiFi working. I've tried WMWiFiRouter, but it either keeps giving me 'Fatal Error' or the connection drops off the moment the PC connects to it. I've also tried ICSControl.exe, a program that someone on XDA has created, but I just couldn't figure out how to get things going with that (or I'm too dumb).
Could someone please tell me the easiest way to get my data connection working on my laptop over Wifi? I'm using Raphael with the stock rom.
Cheers
its built in i think in the commanager last option. but it is set to bluetooth pan standard if i am correct.
you can try use advanced config 3.1 and goto data connections.. change private interface for internet sharing to wlan.
i was surprised to see Advanced Config had the option there. But it still doesn't work
I changed the private interface from the default of 'Custom' to WLAN11g1 and it asks me to soft-reset the device, which i did. Then I go into Internet Sharing, and I still only get 'USB' or 'Bluetooth PAN' as options. Am i missing something?
there is another wlan option in there.
i have no idea how this is supposed to work :/
one would think that setting this option would set the setting to wlan as supposed to. not sure if you should change it or not afterwards with the connectionsharingsettingstab. it probably overwrites the value in registry.
here is something you can try :
turn on wifi
set the option in adv config to TnetWln1
reset
turn on this wifi AP application and try using it
WMwifiRouter
Just tried WMwifiRouter on my Touch Pro and it worked fine
Works fine for me too. Takes all the hassle out of it!
adityasen said:
I desperately need to get ICS over WiFi working. I've tried WMWiFiRouter, but it either keeps giving me 'Fatal Error' or the connection drops off the moment the PC connects to it. I've also tried ICSControl.exe, a program that someone on XDA has created, but I just couldn't figure out how to get things going with that (or I'm too dumb).
Could someone please tell me the easiest way to get my data connection working on my laptop over Wifi? I'm using Raphael with the stock rom.
Cheers
Click to expand...
Click to collapse
2 questions:
1) Which network are you with? If your connection works but stops when you get ICS to try to connect, it may be blocked by your network if a) you are not allowed to use your mobile as a modem and/or b) ICS is not allowed. Does your connection work with standard email/web?
2) Why sharing your connection over wifi when BT pan works so well and so easily and you only need to share with your laptop? I use wifi when the laptop can connect directly to a router/hotspot, otherwise I use BT Pan. There is no real speed compromise as the bottleneck is the 3G connection itself), and BT 2.0 EDR offers a wide enough bandwidth for what you want to do. I use skype on my laptop with my 3G connection shared over BT PAN and it works a treat (that is, better than Skype 2.2 on WM!).
I'm probably missing something....
Manni01 said:
2 questions:
1) Which network are you with? If your connection works but stops when you get ICS to try to connect, it may be blocked by your network if a) you are not allowed to use your mobile as a modem and/or b) ICS is not allowed. Does your connection work with standard email/web?
2) Why sharing your connection over wifi when BT pan works so well and so easily and you only need to share with your laptop? I use wifi when the laptop can connect directly to a router/hotspot, otherwise I use BT Pan. There is no real speed compromise as the bottleneck is the 3G connection itself), and BT 2.0 EDR offers a wide enough bandwidth for what you want to do. I use skype on my laptop with my 3G connection shared over BT PAN and it works a treat (that is, better than Skype 2.2 on WM!).
I'm probably missing something....
Click to expand...
Click to collapse
ICS has nothing to do with your carrier. It works the same way on your phone as it does on the pc. it merely routes the gateway to the devices connected to the ICS network.
I myself have a TP and use ICS with Softbank (softbank roms do not contain ICS) and it works fine.
I agree with you however, when it comes to bluetooth. Even if your PC doesnt have BT, it is well worth it to buy one of those nifty mini adapters.
they are so tiny, you wont even see them. But easy to setup and fast enough.
im with 3. nomal mail / web works fine. there are no restrictions by the network for ics. as for the BT question, I dont have BT on my laptop. it has built in wifi and i want to use that. i also have a mac n have never managed 2 get BT PAN working with os x.
Can't get BT pan to work with Vista either. My laptop does not "find" the HTC Touch pro as a pan enabled phone.
latest version works ok
Mod Edit: Attachment removed by request from the author.
the latest version is 1.10 not 0.94. have tried it with not much luck
adityasen said:
the latest version is 1.10 not 0.94. have tried it with not much luck
Click to expand...
Click to collapse
its 0.91...
you are sure we are talking about the same application ?
there is also one from htc which isnt a wifirouter program actually
da_jojo said:
its 0.91...
you are sure we are talking about the same application ?
there is also one from htc which isnt a wifirouter program actually
Click to expand...
Click to collapse
Version 0.91 is the last "free" version of the program. It is no longer free and it's version number has changed as well, version 1.11 is the latest.
henkreyn said:
Can't get BT pan to work with Vista either. My laptop does not "find" the HTC Touch pro as a pan enabled phone.
Click to expand...
Click to collapse
First make sure you have no active BT connection, either on your desktop/laptop or on the TP (i.e. BT Headset).
You need to go to Comm Manager (BT switched on of course!), select BT Options (lower right menu), Mode, and select "make this device visible to other devices".
Once you've setup a partnership, it will probably say "connection denied" on the first connection.
Don't be as dumb as me, got to internet sharing (all programs) and select BT Pan and Connect... Then try to connect BT Pan again...
It *should* work (works a treat on my Vista 32 desktop and my Sony TZ11 Laptop, I get around 400-500kbps down and a bit less up).
BT PAN
I followed your directions exactly, but the problem remains. I get however once the phone pairs with the laptop (HP tx2000) a request for the "Bluetooth peripheral device" driver. I can't find this driver so it has probably something to do with this.
Maybe you should try IcsControl.
It's free and works great.
Id go wmwifirouter route. I have never had good luck with icscontrol never could get it to work and it pissed me off instead
henkreyn said:
I followed your directions exactly, but the problem remains. I get however once the phone pairs with the laptop (HP tx2000) a request for the "Bluetooth peripheral device" driver. I can't find this driver so it has probably something to do with this.
Click to expand...
Click to collapse
You need to update the bluetooth driver for your laptop. Check the manufacturer (in, the device manager), usually widcomm or toshiba, and try to get it from their website if HP doesn't provide it (although they should). Vista drivers usually work, but I guess you're using XP? It may be worth checking on HP website to see if their offer updated BT drivers for your laptop.
Nighthawk said:
Version 0.91 is the last "free" version of the program. It is no longer free and it's version number has changed as well, version 1.11 is the latest.
Click to expand...
Click to collapse
I've tried both versions of the program (free old V0.91 and trial for the commercial V1.11).
They both work with the Touch Pro (tried with my Vaio TZ11).
V1.11 is however around 20% faster (I get an average of 500kbps with V0.91, and consistently above 600kbps down with the V1.11).
So the old version gives about the same bandwidth as my BT Pan (without the convenience of sharing between more than one client), while the V1.11 seems to be better optimised and provides better bandwidth.
The response time is around 100ms for both (against around 140ms for BT Pan). Upstream is around 300kbps for both version , against 400kbps for BT Pan.
This is on a UK T-Mobile HSDPA connection, with 3/4 bars signal strength (could those who manage to get it to work let us know if they get better figures?).
You should obviously get much better with Vodafone in a 7.2Mbps area like London/Major airports.
Hello,
I did quite some searching on this topic but nothing to be found. Maybe some developers can shed some light on this issue?
Many developers have written excellent applications that take the GPS output of the phone and display your coordinates, altitude, speed, and other variables. Presumably, this information can be gathered without the need for a data application.
Now, let's say the data format that the GPS is outputted in (NEMA Standard) is slipstreamed consistently into a Maps application (like Microsoft Streets & Maps), then you would have a winner. The combination of preloaded maps with the power of the GPS receiver in the G1 would give you awesome maps functionality on the cheap (perfect for that Netbook).
However, much GPS status applications only display the output on screen. While it is nice to have a coordinate staring at you in the face, that's all it's doing. Instead, utilizing those NEMA values for the computer to interpret would simplify the process.
My friend and I proposed a couple of concepts on how to take this on:
1) Upload the NEMA data to a server
*Okay idea but defeats the purpose of going Data-less. I might as well use Google Maps
2) Upload the NEMA data to a local server
*Good idea but if the laptop is connected to an ad-hoc network or some weird [sic] network, the phone maybe unable to connect to the same network (i.e. business-style wifi logins)
3) Bluetooth. Beam data through OBEX file transfer or other method.
*Better idea but the implementation of bluetooth in Android does not currently support OBEX file transfers or other pairing mechanisms. Would this be possible to carry out?
4) Serial output via USB.
*Best idea. This would put the GPS receiver in tandem to the other devices.
So...any ideas? Would love to hear them. Are there people who could utilize such functionality for a netbook/laptop combination? Spill your comments, questions, concerns.
Developers, feel free to chime in at any time Thanks.
~NerveBand
try BlueNMEA witch is avaible on the market, it send NMEA over bluetooth.
So does anyone use BlueNMEA and if so can you help set mine up. I cant seem to find any real documentation.
Are there any other options for utilizing the gps on a program like streets and trips?
Can anyone confirm blueNEMA and CM-4.1.9999?
Has anyone successfully gotten this blueNEMA working with a G1 + Bluetooth + Laptop and Streets and Trips?
Love to get this working too... I have the BlueNMEA installed, paird with my laptop over BT but I cant get MS Streets and Trips to see it, if I scan it doesnt see it either... weird.
Here's a bit of documentation I found: http://git.snow-crash.org/?p=blue-nmea.git;a=blob_plain;f=README
Sorry for the bump, but...
Is there any possibility of this ever working over USB rather than bluetooth?
I am using ARHD ROM (with Bricked Kernel).
My car can access and read out RSS threads and has a lot of interactive media functions, including being able access the internet via my bluetooth enabled phone. But I can't seem to get it to work fully, and really don't know if it is a ROM / Kernel / Phone issue or a car issue. I just don't know enough about the various bluetooth protocols etc, and as much as I research it, I keep going around in circes.
The car will connect to the phone and work fine as a bluetooth headset for telephone calls. It will also display the caller picture without issue and will access and read out my emails (using stock sense Mail client) and SMS messages. It also seems to connect to audio OK (although I never use it as it has a USB port that will accept a pop drive, so all my music is on the dashboard).
But the internet connection doesn't seem to work. I have looked into this and can't work out if it is a PAN or DUN profile issue. Soemtimes I can get the phone to show an internet connection being available to the car, sometimes it doesn't depending on which ROM I use and I can't seem to get any to work regardless.
Looking on the website, it claims the following:
How can I configure my mobile device for internet or BMW TeleServices usage?
In the operating manual of your mobile device you will find instructions on configuring “Access Point Name (APN)”; other names for this may be “Internet Settings”, “Modem Settings” or “Tethering Settings”. The required settings are available from your service provider. Please note that most Sony Ericsson mobile devices only recognise the first entry in the APN list, so it is recommended that all other APN configurations be deleted.
Can somebody please help me with this. I really am baffled as to how to get this to work.
Sent from my HTC Sensation Z710e using Tapatalk
Bump. Anybody?
Sent from my Motorola DynaTAC using Tapatalk (feels like it at times with this phone)
It has been a year or 2 since I got bluetooth networking going. Today I tried to get my phone to connect to my windows 7 desktop and.... it couldn't even connect sadly enough. Anyways this is from memory so it may or may not be correct. I don't like posting incorrect stuff because you never know who will read/flame.
1. pair your phone to the other device
2. connect via bluetooth your phone to the other device
3. I used the app in the link below to turn on bluetooth tether. Your kernel needs to support this feature. Just a note, there are 2 apps off the link. One is wifi only, the other does bluetooth and wifi. Assuming you get this app, turn on bluetooth tether. I don't know if you should turn tether on then connect bluetooth. Maybe it doesn't matter.
4. This step I don't quite understand. The bluetooth tether should "offer" a network service to the remote device. The remote device in turn must recognize the service and use it. DHCP is the easiest to auto configure everything. If you need a name server, use 8.8.8.8 since that is a public dns server by our google overlords.
http://code.google.com/p/android-wifi-tether/