Database Info

ROM 1.06.116WWE

this afternoon i found an update on the swedish qtek site.
http://www.qtek.se/default.asp?nc=4484&id=127&element=0
wonder if it could be used by english speaking users? it says WWE, so i guess it is in english?
i'm uploading the unpacked installation folder to FTP now. maybe someone who knows his thing, could magic a .bat file with the correct checksum to change the carrier and language? [pinoo? ;-)]
the file is called: MA_Qtek(BrPt)_10600_116_10500_SHIP.zip

Hi there..
I will take a look... But my device is with PocketPcTechs at the moment... Getting 128MB RAM ... WOOOOOOOOOOOT
:lol:
Cheers

has anybody yet found out what the passwords for the rom files are?
btw, have the last ones (the imate rom for example) been cracked or did anyone blurt out the right keys?
cu

A bad traduction :
Click on the links below in order to update your Qtek S100. Follows installationsguiden careful in order to few a correct updating.
ROM 1.06.116WWE
(updating from ROM 1.03.148WWE to ROM 1.06.116WWE)
The updating is only for Swedish sold Qtek S100 with software version 1.03.148WWE. In order to check which version you have pressures Start>Settings>System>Device information, you find the information on ExtROM version. If you try to update with another version of software can the to damage your Qtek S100.
The updating ROM 1.06.116WWE contains:
GSM-radio software
MMS client (2.0.0.20)
Caller IDS
Phone PAD Swedish T9
Updated Blåtandsmjukvara
Installationsguide ROM 1.06.116

actually it was pretty clear that qtek only offers their support to their respective customers. Nevertheless it should be quite possible to gain advantages out of an alien fw ;-)

...so it could not be used for I-mate JAM and other models.... :roll: If someone has updated the firmware pls report the "improvements"...
Regards,
Primoz

Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !

taron said:
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
Click to expand...
Click to collapse
That would be very nice!
Regards,
Primoz

Anyone upgraded yet?
Hi, has anybody yet tried out the new QTEK ROM 1.06? If so, could you be so kind to make a ROM image and put it onto the ftp? Guess that'll be way easier than finding out some passwords to change the update-files?
thank you!

Why couldnt this be installed on non-swedish qtek s100?
Seems like an normal english rom-update
Wonder what it is with the bluetooth.
Cause the stack that is installed now is way to slow.

We need the passwords so xda3nbftool can be used to change operator id. Then we get past the Country id error...
So if anybody know the passwords that would be nice...

it cant be used out-of-the-box because the upgrade tools checks for your device-id, the carrier-id (which must be the one of qtek), the language (which, as you've said would fit) and the rom versions.
Thus, at least the carrier id would be different which is enough for the upgrade prog to abort. So there are 2 work-arounds:
1.) using xda3nbf-tool which requires the rom-passwords to decode the rom, change the parameters which are checked and re-encode the rom. Unfortunately anybody knows the passwords yet
2.) do a rom backup of a succesfully upgraded qtek-device with the bootloader-method which gives you *one* file that contains all the radio, the ext-rom and the os rom. This file needs to be modified by a hex-editor (which actually means to replace the first 412 bytes from the qtek-backup with the first byte of your own backup) --> restore the edited file et voilà: it should work. Unfortunatly anybody has posted such a backup yet...
conclusion:
way 2) is easier (at least we dont need any passkeys) nevertheless we still need that backup...
regards,
André

sorry, my upload was broken... should be ok now. the file is called MA_Qtek(BrPt)_10600_116_10500_SHIP.zip and you can find it in the Magician folder on the xda-ftp. it's basically just the unpacked installer.
could anybody tell me how to write a proper .bat file, like the one pinoo did for the i-mate rom? i suppose i need to change the 0x20040522... numbers to stop the installer giving the "invalid checksum" error?
...and reading the last post these numbers seems to be the passwords Guest was talking about...
any chance of getting them?

Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((

BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).

landau said:
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
Click to expand...
Click to collapse
Just upgraded my Imate Jam radio stack to this one and seems that it improved phone sound quality a lot or am I just hoping so ?!
However no problems with upgrading the radio stack only!

Hello,
landau said:
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
Click to expand...
Click to collapse
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks

macrinus said:
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
Click to expand...
Click to collapse
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe

Magician Extended Rom Unlocker

I removed the tool since you confirmed the unsuccessful unlocking, isn't the time to create such tool?

I'm getting:
Magician Unlocker.exe is not a valid win32 application.

Smahatma said:
I'm getting:
Magician Unlocker.exe is not a valid win32 application.
Click to expand...
Click to collapse
You have to run it on your PPC....
Stefan

Experiances
@ Stefan,
worked with it yet?
Your experiances?
Seems awsome, pitty can try it at the moment due to mksbigstorage without extendedrom.
Please give some feedback wether or not its working, especially the "unlock" and the possible editability.
Cheers

LumpiStefan said:
Smahatma said:
I'm getting:
Magician Unlocker.exe is not a valid win32 application.
Click to expand...
Click to collapse
You have to run it on your PPC....
Stefan
Click to expand...
Click to collapse
Ah, silly me
I wish I would have known that before I upgraded ROMs and did the bigstorage hack :?

It's not that easy ramram.
U can't unhide the rom. No error message.
So you also can't unlock. Message "FL_IOCTL_BDTL_HW_PROTECTION"
But nice try so.

I think the hardware of the Magician is also a problem....comparing the Magician to the Himalaya for example,we see that Himalaya has got 2 ROM chips each 32 MB,one of them contains the ROM image,the other contains storage + extROM...so somehow,unlocking ext ROM have to deal with the second chips,and keep the ROM image chip untouched...the same hardware architecture applies on BA,but with 2x64 MB chips....on the other hand,the Magician,has got only 1 ROM chip of 64 MB,containing the ROM image(36 MB),the small storage,and the EXTROM....that's why unlocking EXTROM can not leave the ROM image chip untouched,and that's the problem I think....
Anyway,thanx ramram for trying,it's time that someone try to do something concerning Magician ext ROM unlocking,since Anansky has vanished (with everything he knows ),after helping no one....
RAGO :lol:

please i need the rom unlock tool can anyone upload it

what to do with extROM ?

hello, i have unlocked extRom, but I cant use it for nothing. when i try to install something on it, after install files just disappeared. same thing with mp3 etc...
second problem - my device doesnt recognize service provider name, only number - 28403. please help me to patch registry for op name: Vivatel
10x in advance
please help !

1.u have only made the extended rom unhidden, not unlocked. Use the unlock tool provided on this forum(search )
2.the fix to change the provider is not permenant. Even if you change the text in registry, it ll roll-back to old name after soft-reset.

Always bootloader screen

Hi, I've a vodefone v1240 (HTC Tornado), i've tried to flash wm6 flash to it... but... i haven't super cid unlock... the flash is ok but phone always star in muticolor screen (botloader screen), i've tried to flash a lot of flashes but always get invalid vendor id or "only upgrade"... i've tried too with TyphoonNbfTool to edit nbf and change vendor id.. but always get the same mensaje ("invalid vendor id" or "only upgrade")...
How can i recover my phone? :S
Thanks
Sendoa

Determine your original CID first, to do this type:
Code:
info 2
into mtty or teratermpro and paste the output in the thread
Phil

Ahh, there you are ! Are you or duke_Stix still planning to cook some newer ROMs or remove bugs from the existing one ? We hardly see you guys around there days

i get this... what is the original CID? ¿?
info 2
GetDeviceInfo=0x00000002
+ SD Controller init
- SD Controller init
+StorageInit
***** user area size = 0x3CE40000 Bytes
HTCSVODA0504 㱍dHTCE
Cmd>

@anandoc: I've been fairly busy lately what with Jury Service etc but I've got a beta version in progress
Changelog:
HTC Task Manager inc
HTC File Manager inc
Application Unlocked
Fixed WiFi
HTC Comm Manager inc
Removed Wireless Manager
Removed Debug Apps
Removed Marketplace
Removed Office
Removed Voice Command,
Removed Windows Update,
Added Bluetooth DUN support for TomTom compatibility
Added Bluetooth FTP protocol
Extra's (as a separate download)
Office
MMS (semi working)
HTC Clear Storage
Jeodek Java
Button fixes
xT9 (for those who prefer it over standard T9)
xT9 lang packs (split into separate languages)
TCPMP
wm5torage
VoIp
Localisations:
Polish
Czech
Russian
However at the moment I'm having issues with initflashfiles.dat, once these are sorted, it will probably be released the same day.
Back to the topic:
Ok, using typhoonnbftool v0.41 open up a tornado nbf (wm6 or official, it doesnt matter) and then edit the header data so that the Operator field reads:
Code:
VODA0504
That is your original CID
Then save the nbf and flash it to your device
Phil

done but...
Hi, i've done but... always get a "only upgrade"... only let me to reflash wm6 flash.. but it always return to bootloader screen :S what am i doing wrong? :S
Thanks anyway
Sendoa

Try adjusting the version numbers to something ridiculous like 99.99.99.99 as well
Phil

jm012a9749 said:
@anandoc: I've been fairly busy lately what with Jury Service etc but I've got a beta version in progress
Phil
Click to expand...
Click to collapse
Hey Phil, Thanks very much for the update ! Your hard work is much appreciated here !!

Me too
I'm having the same problem as Sendoa. I flashed the WM6 ROM to my 8310but after 100% completion, the phone re-started in bootloader mode.
I can flash it again with the WM6 but the same thing happens each time (bootloader mode). I've tried to flash with several other ROMs but each time I get the "Invalid Vendor ID" error before flashing begins.
I've tried the Typhoonnbftool tool to change the header as suggested earlier in this thread but without any success. My CID is 'DNG_0501'. I'm still stuck in bootloader mode.
I'd appreciate any assistance.
Thanks,
Straker.

Sorted
Sorted. Found another ROM (the fifth I've tried) that would flash without the 'Invalid Vendor' message. It let me get back to a standard WM5 setup.

Solved
Thanks to all
I flash it with a cingular flash with version changed to 79.79.79.79 and operator changed to VODA0504, and work again.. then i've unlock the cid and flash wm6 flash and it is working with it
Thanks again

Wow, that's cool, means I can flash my phone to WM6 without voiding my warranty ( I still got 5 months left )

lomanasq said:
Here, here they are:
cancer awareness ribbon
Click to expand...
Click to collapse
ban this MOTHA F**&&

Straker said:
Sorted. Found another ROM (the fifth I've tried) that would flash without the 'Invalid Vendor' message. It let me get back to a standard WM5 setup.
Click to expand...
Click to collapse
where did you get your flash from?

typhoonnbftool is creating only 1kb file of nk.nbf
Hi,
I have the new typhoonnbftool got it from sourceforge when i try to edit headers of a Imate rom to make it for xpa swisscom v1240 with the CID "VODA0505" i get only 1kb nbf file i try lots of thinks but no luck at all.
kind regards
Fakbrenjeri

Similar problem
I've used Typhoonnbftool to change header, but the resulting file is only ever 1kb or smaller! What am I doing wrong?

Small nbf
Straker,
Where did you get the rom that worked?

timwb said:
I've used Typhoonnbftool to change header, but the resulting file is only ever 1kb or smaller! What am I doing wrong?
Click to expand...
Click to collapse
use typhoon tools 0.4.1...
ftp://ftp.xda-developers.com/Uploads/Smartphone/Tornado/Shipped_Complete_Updates/I-mate
use the rom from here..

Stuck on BootLoader
I there!
I've tried everything that I could find here and still no luck...:-\
I've an SPV C600 and when I upload the Imate ROM it stays stuck on the BootLoader.
It only works if I upload the Orange Upgrade ROM...
I can't SuperCID it, since no app as worked till now...
What can I do?
Thank you!

try this:
http://forum.xda-developers.com/showthread.php?t=285344

[Q] Where is the OS version number stored?

Hello, I have a Samsung Taylor (developer device) stuck in version 7003, and I'm trying to force-update it.
So far, I have patched ChevronWP7.Updater to apply the update if it detects that the phone version is 7.0.7003.0 (by default it only works if version is 7.0.7004.0). Everything works well, the program says the device was updated successfully, but when it reboots, it's still stuck in 7003.
So, I was hoping if anyone knows the registry key/system file where the current OS version is stored, to try and change the value there.

Sorry, there is literally NO WAY to update the Taylor or the Panther. Changing the OS version, unbranding or even changing the model number (i've changed mine from GW910 to LG-C900) through the registry won't force the update.
But to answer your question the key is "ROMVersion" (string) which is located in
Code:
HKEY_LOCAL_MACHINE\System\Platform\DeviceTargetingInfo

fb401 said:
Changing the OS version, unbranding or even changing the model number (i've changed mine from GW910 to LG-C900) through the registry won't force the update.
But to answer your question the key is "ROMVersion" (string) which is located in
Code:
HKEY_LOCAL_MACHINE\System\Platform\DeviceTargetingInfo
Click to expand...
Click to collapse
Does anyone know if it's possible to change the version number in the registry to force an update? I'm stuck on 7003 on a Samsung Focus and want to try anything that will remotely give me a chance to upgrade this phone.
I've googled all over the place but haven't found a dump of hklm\system\platform\devicetargetinginfo or any other relevant areas of the registry. Hard with the SamsungRegistry app too, as you can only find/write to keys that you know the path to.

dstreefkerk said:
I've googled all over the place but haven't found a dump of hklm\system\platform\devicetargetinginfo or any other relevant areas of the registry. Hard with the SamsungRegistry app too, as you can only find/write to keys that you know the path to.
Click to expand...
Click to collapse
I found the WP7 Root Tools app, and I'm using that now to poke around the registry.

I gave up on this last night after poking around in the registry for 2-3 hours. There was nothing that specifically identified my OS version as 7003.

your in the wrong section , go to the developers section and look around there , no need to google, all the info you need is in there!good luck!