hi to all, i m new here , any budy tell me how to hard reset HTC VOX0101 ?
thanks
B / R
JAKKAR
go to the "search" button and put the words vox, hard, reset in and click Search
thx bro
thx bro good adwise ,i m new here so,
VOX Hard Reset
WAY: 1
Open the 'Start' menu
Select 'Expert'
Select 'Clear Storage'
You will now be prompted with a warning about the consequences of a hard reset.
WAY: 2
If you cannot run program to hard reset form "Expert" folder. Turn off your phone, then press both *SOFT KEYS* and *POWER ON* device. After moment release both soft keys. On the black screen asking for confirmation press *GREEN PHONE BUTTON* and wait couple minutes for phone to initialize.
Hope it helps
Related
my XDA II lost button driver so I can not used the camera button when I upgrade to WM2005. It can not clear storage when it reboot. Help me...cry. Thanks
http://buzzdev.net/index.php?option=com_content&task=view&id=74&Itemid=1
button
"It can not clear storage when it reboot. Help me...cry. Thanks"
it's the new thing with 2005 that it dont
if you want it to delete you have to choose so in the bootloader
Thanks. I already test follow introduce of buzzdev.net but it counldnot active
My HTC S710 kept on restarting and didnot go beyound the HTC screen. I did a Hardreset... But 2 my surprise after the hard reset the 3D menu screen is gone. This is strange as it should be inbuilt in the ROM. Do we have to install 3D Menu separetely and if yes where can I have the application to install so that I can have the 3D menu display back on my S710.
3D Menu?
Usually, if your device can't boot, pulling out the mem stick and reboot helps. Push memstick back in after it has rebooted.
i can't find hard reset i don't understand where i found expert???
Click Start and look for a folder called Expert. In it you find Clear Storage.
Start it and type 1234 and click Yes, Your device will reset all settings to manufacturer default.
I think it's the same as Dopod C500 in Taiwan, which you have to register to their website to download it back, put it in your storage card under root\2577 folder by cardreader. Put the card back in then it will install automatically.
If you can download from the official website, could you please send me a copy, I want to try this one out too, many thanks in advance.
So I want to flash my T-mobile wing, but I barely understand what flashing is. Can't understand your terminology, ......and even though I find some roms, none of them have specific instructions on how to do this.
Thanks in advance for all of you who answer...and I know some will say "search and find" but I've searched and found, but haven't understood.
Wrong place for this post, although there is no clear questions and answers section.
Trust me when I say the information is there.
Definitions:
RUU: Stock Operating System (ROM) that comes with your phone.
ROM: Phone Operating System.
SuperCID: Unlocks the device to allow flashing of non-stock and custom ROMs.
USPL: Allows you to temporary SuperCID your device to enable flashing using a Flash Center Utility in Windows. You cannot use LZX compressed ROMs, and you cannot flash ROMs requiring an SD Card.
HardSPL: Permanently (Well Almost) SuperCIDs your device to allow you to flash any ROM of any type, as long as it is a Herald/Wing ROM. You can flash using SD card, or through a Flash Center. I say it is almost permanent because it can be reversed.
However, for the sake of this, I assume you'd like the easiest and safest way. SO I will instruct you how to USPL your device to allow you to temporarily unlock it. Remember, you cannot use a LZX compressed ROM with this method, or ROM requiring an SD Card to flash.
First things first, you need to download the folder im going to provide you. Save the zip to your desktop and extract it. Now the fun begins.
1. Drag and extract the .nbh file you downloaded from the ROM and place it inside the RUU folder located inside of the MyFirstRom folder.
2. Turn your phone to flight mode. You can do this in the Comm Manager found in your Connection Settings.
3. Next make sure your phone is connected to your computer and you have Activesync (Win XP) or Mobile Device Center (Vista or Windows 7) connected with a green light.
4. Execute the application Herald-USPL (located in the MyFirstRom folder).
5. Wait for it to verify, press Enter. Wait for it to load SPL, PDA screen will go white at about 70 percent. If it doesn't and it hangs on a tux logo with a little command prompt (on the phone, sometimes this happens.) don't worry and just reset and try again.
6.If everything is successful and the PDA screen is white, press Enter and it'll launch the RUU installer application on your computer.
7. Follow the instructions, Press the Update button when it asks you what ROM you are installing. It should show some version number. Press Next, and it'll start flashing. It will say it will take 10 minutes, it'll go faster than that. After it's finished, the PDA will automatically reset to the new RUU.
If you experience any problems, don't panic, Soft Reset your device by pushing the stylus into the small whole next to the volume slider. If the phone goes into an endless reset, don't panic... Hard reset your phone by pressing holding the two soft-keys (keys with lines located above the Windows key and Ok key) while pressing the sylus into the reset hole. Release the soft keys while still holding reset and then release the reset. It will come up with a screen telling you you are being set to factory settings, press the Send key. (Green phone key)
kanunez said:
So I want to flash my T-mobile wing, but I barely understand what flashing is. Can't understand your terminology, ......and even though I find some roms, none of them have specific instructions on how to do this.
Thanks in advance for all of you who answer...and I know some will say "search and find" but I've searched and found, but haven't understood.
Click to expand...
Click to collapse
Don't understand the terminology lear ? want to lear?
zcink said:
Don't understand the terminology lear ? want to lear?
Click to expand...
Click to collapse
Awfully harsh on typos aren't we?
apreichner said:
Wrong place for this post, although there is no clear questions and answers section.
Trust me when I say the information is there.
Definitions:
RUU: Stock Operating System (ROM) that comes with your phone.
ROM: Phone Operating System.
SuperCID: Unlocks the device to allow flashing of non-stock and custom ROMs.
USPL: Allows you to temporary SuperCID your device to enable flashing using a Flash Center Utility in Windows. You cannot use LZX compressed ROMs, and you cannot flash ROMs requiring an SD Card.
HardSPL: Permanently (Well Almost) SuperCIDs your device to allow you to flash any ROM of any type, as long as it is a Herald/Wing ROM. You can flash using SD card, or through a Flash Center. I say it is almost permanent because it can be reversed.
However, for the sake of this, I assume you'd like the easiest and safest way. SO I will instruct you how to USPL your device to allow you to temporarily unlock it. Remember, you cannot use a LZX compressed ROM with this method, or ROM requiring an SD Card to flash.
First things first, you need to download the folder im going to provide you. Save the zip to your desktop and extract it. Now the fun begins.
1. Drag and extract the .nbh file you downloaded from the ROM and place it inside the RUU folder located inside of the MyFirstRom folder.
2. Turn your phone to flight mode. You can do this in the Comm Manager found in your Connection Settings.
3. Next make sure your phone is connected to your computer and you have Activesync (Win XP) or Mobile Device Center (Vista or Windows 7) connected with a green light.
4. Execute the application Herald-USPL (located in the MyFirstRom folder).
5. Wait for it to verify, press Enter. Wait for it to load SPL, PDA screen will go white at about 70 percent. If it doesn't and it hangs on a tux logo with a little command prompt (on the phone, sometimes this happens.) don't worry and just reset and try again.
6.If everything is successful and the PDA screen is white, press Enter and it'll launch the RUU installer application on your computer.
7. Follow the instructions, Press the Update button when it asks you what ROM you are installing. It should show some version number. Press Next, and it'll start flashing. It will say it will take 10 minutes, it'll go faster than that. After it's finished, the PDA will automatically reset to the new RUU.
If you experience any problems, don't panic, Soft Reset your device by pushing the stylus into the small whole next to the volume slider. If the phone goes into an endless reset, don't panic... Hard reset your phone by pressing holding the two soft-keys (keys with lines located above the Windows key and Ok key) while pressing the sylus into the reset hole. Release the soft keys while still holding reset and then release the reset. It will come up with a screen telling you you are being set to factory settings, press the Send key. (Green phone key)
Click to expand...
Click to collapse
Thanks a lot...I'll give it a try in a few minutes...
it never ceases to amaze me the things people ruch in to the get surpised when it doesnt work right they want someone to jump up and help them that second. was so worried i was gona break my new toy it took me weaks to think i knew enuff to not just do it but fix it to and still was nervios. it not something you should rush in to. why would u want too not only will your phone be better but its not half great as learning this stuff i feal like ive failed if i gota ask something like i did today anyway. good luck
This always kills me, if the kids dont know how do wat their asking then why are atempting it?. Then they come back crying that their phone is stuck on a red blue green screen! If u dont know wat it is dont attempt it. But if you must know, In simple terms, !!!HERES WHAT YOU NEED!!!
*TMOBILE WING*
*CUSTOM ROM*
*MY FIRST ROM FOLDER*
*PUT CUSTOM ROM INTO RUU FOLDER "INSIDE" MYFIRSTROM FOLDER*
*GO BACK AND LAUNCH HERALD UPDATE PROGRAM
COMPUTER*
*ACTIVESYNCE*
*USB CABLE*
*THE ORIGINAL TMO/HERALD OEM ROM*
Read everything! its the only way you'll find out.
well if you take out all the drunkin ramblings that some hoe get in all my posts. thats what i said. thx good translation. usualy i make a post the thread ends .
Bricked Herald (Dopod C800)
Hello,
Tried the MyFirstRom and bricked my C800
Steps
====
1. Started the herald-uspl.exe
2. DOS prompt came up
3. Step 1 in the window went fine
4. Step 2 went fine.
4. Step 3 went corrupt and
NOW:
====
1. Cannot do a factory reset. The device says, format failed
2. Will not go beyond green screen and show IPL/SPL versions
How can I revive the set? Am I dead for ever?
budikspam said:
Hello,
Tried the MyFirstRom and bricked my C800
Steps
====
1. Started the herald-uspl.exe
2. DOS prompt came up
3. Step 1 in the window went fine
4. Step 2 went fine.
4. Step 3 went corrupt and
NOW:
====
1. Cannot do a factory reset. The device says, format failed
2. Will not go beyond green screen and show IPL/SPL versions
How can I revive the set? Am I dead for ever?
Click to expand...
Click to collapse
Reinstall your phone's factory ROM. (It needs to be the factory, since you didn't hardSPL, you can only flash signed ROMs from the SPL screen.)
I installed 'Fixed-Swype-HTCBlackBird-3.9.10.10.5032.cab' on my HTC HD2 today and the phone then went straight to the main restart screen requesting me to enter the keyboard password to get access to the phone but I am now unable to.
I have tried 'Hard Resetting' the device as below but cannot get the message to display for the reset.
Can someone please advise if there is a new sequence of no's to enter onto the start up keypad or an altertive way to Hard Reset while the phone is powered off.
I believe that the Swype keyboard may have conflicted the orignal keyboard hence screwing up any entries.
Kindly awaiting responses.
Thanks
Tony
-----
Hard Reset : steps tried :
With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it. You will then see this message on the screen.
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
hello
"I installed 'Fixed-Swype-HTCBlackBird-3.9.10.10.5032.cab' on my HTC HD2 today and the phone then went straight to the main restart screen requesting me to enter the keyboard password to get access to the phone but I am now unable to."
i have the same problem
have i a chance without hardreset?
pleas help
network66 said:
hello
"I installed 'Fixed-Swype-HTCBlackBird-3.9.10.10.5032.cab' on my HTC HD2 today and the phone then went straight to the main restart screen requesting me to enter the keyboard password to get access to the phone but I am now unable to."
i have the same problem
have i a chance without hardreset?
pleas help
Click to expand...
Click to collapse
try connect to PC via AS after that delete from hd2 autostart some swype shortcuts (if there exst)
i can´t change to AS.
i see only my sd-card
HELP To Install Swype
Hey Guyz.. I'm sorry I'm a complete alien to this community. I wanted to install swype and i downloaded a cab posted on Xda Developers. Version 3.9 i guess. The downloaded file is a win rar file containing numerous files in the folder. I dont know now how to install it to my HTC HD2.. I copy pasted it to My SD card and then tried to hunt for a set up file that would install but no luck.. Please tell me how do i install. Sorry for my ignorance
Cheers
do not unrar the cab file. copy and paste in ur sd card folder and run it from there
This is a known problem and all the more reason it should not be distributed outside of the ROM's it was meant for. Installing the cab changes your device ID to TMOUS instead of LEO.
same problem
I have the same problem.
Is there any solution to the problem?
Would be really appreciated, thx!
Kind Regards
Scuzzor
yeah today i'm one of the victim also... does any1 have any solution for this...keep saying its the wrong password...now i cant enter my phone,huhu...plz help...thanks!
Problem fixed...hard reset the phone then everything is good,learn my lesson already,b4 trying any new apps backup your phone first !!!
Okay...so every time i restart my phone i find it that i have to keep installing all the mods that i have to make it me again...so my question is is there a way i can put all these cab files together in one folder and they just install by themselves? Or make one large cab file do it can install all at once?
55jj said:
Okay...so every time i restart my phone i find it that i have to keep installing all the mods that i have to make it me again...so my question is is there a way i can put all these cab files together in one folder and they just install by themselves? Or make one large cab file do it can install all at once?
Click to expand...
Click to collapse
If you restart your phone, you should still have all the mods installed...
Aren't you referring to a hard-reset?
If so, you could use something like sashimi to automate the installation procedure..
Grtz,
Degake
???????????
Can you elaborate, please?!
- By restart, do you mean:
1. "Hard RESET" (accomplished by choosing "Factory reset" from Sense/Settings tab, "clear storage" option from control panel, or holding down both volume keys + power button)
2. Or, do you mean "Soft RESET" where you simply turn your phone OFF/ON, take the batter out and in again, or pushing the tiny reset button at the back?
- When do you lose your settings & mods? is it when you apply a soft reset or when you apply a hard reset?
- Yes, there options to automate cab installations such as (for example):
UC (http://forum.xda-developers.com/showthread.php?t=366337)
SettingsSavior (http://forum.xda-developers.com/showthread.php?t=308100)
Sashimi (http://www.winmo-experts.com/)
P.S. Sashimi has been banned from XDA, and it is therefore not a good choice to go with! UC, on the other hand, seems to be a popular choice round here - and has been for a long time.
Cheers
I don't mean to hijack the thread but could someone explain for what reason sashimi is banned, i was very close to installing it prior to reading this thread.
Thanks.