My HTC S710 kept on restarting and didnot go beyound the HTC screen. I did a Hardreset... But 2 my surprise after the hard reset the 3D menu screen is gone. This is strange as it should be inbuilt in the ROM. Do we have to install 3D Menu separetely and if yes where can I have the application to install so that I can have the 3D menu display back on my S710.
3D Menu?
Usually, if your device can't boot, pulling out the mem stick and reboot helps. Push memstick back in after it has rebooted.
i can't find hard reset i don't understand where i found expert???
Click Start and look for a folder called Expert. In it you find Clear Storage.
Start it and type 1234 and click Yes, Your device will reset all settings to manufacturer default.
I think it's the same as Dopod C500 in Taiwan, which you have to register to their website to download it back, put it in your storage card under root\2577 folder by cardreader. Put the card back in then it will install automatically.
If you can download from the official website, could you please send me a copy, I want to try this one out too, many thanks in advance.
Related
How to unlock the extend ROM of XDA Mini ?
I want to tailor made a modified backup, everytime when I hard reset the unit I can have the same config .. !
Thanks in advance !
do a hard reset, and before the ppc starts installing the software (there's a pop up box that says application installation begin in 3 second time), do a soft reset, and you will find the extended rom folder visible.
not sure if there's a command like "load_vdisk" or something to turn on the folder visibility w/o doing the hard reset.
You can run \Windows\LoadVdisk.exe
to make \Extended_ROM folder visible.
The command is hidden, you may need software like Resco Explorer and enable show hidden files in order to view it.
Note that \Extended_ROM will be hidden again after you soft reset.
just in explorer, hit open^ and type "LoadVdisk.exe"
noneed of installing other explorer-like apps
I have a qtek9000 and a 2gb sandisk sd card. i downloaded
http://vidmes.com//Uni/ROMs/BeastyLeo/2.07.04.BL/Vanilla.rar
and installed it with no problems, system rebooted (before reboot i inserted sd card in) and started installing some cabs and finally rebooted once more.
My problem:
after startup i have this error message ""sddaemon cannot be opened. Either it is not signed with a trusted certificate or one of it's componets cannot be found. You might need to reinstall or restore this file"
and when i check programs i see there are programs that are installed but the icons are blank, and they wont launch.. i also tried rom ranju, same thing...
What am i doing wrong? I serached but i couldnt find any links, if it is posted somewhere, can u please send me a link at least
thnx
RE:
Did you unlocked your mobile, goto the sticky note on WM6 that tells you how to unlock your phone first
for the sddaemon message, goto \windows\startup
yo will find a shortcut for sddaemon, just remove it
Thanks
swunk said:
I have a qtek9000 and a 2gb sandisk sd card. i downloaded
http://vidmes.com//Uni/ROMs/BeastyLeo/2.07.04.BL/Vanilla.rar
and installed it with no problems, system rebooted (before reboot i inserted sd card in) and started installing some cabs and finally rebooted once more.
My problem:
after startup i have this error message ""sddaemon cannot be opened. Either it is not signed with a trusted certificate or one of it's componets cannot be found. You might need to reinstall or restore this file"
and when i check programs i see there are programs that are installed but the icons are blank, and they wont launch.. i also tried rom ranju, same thing...
What am i doing wrong? I serached but i couldnt find any links, if it is posted somewhere, can u please send me a link at least
thnx
Click to expand...
Click to collapse
Hi,
Sounds to me as though you have not cleared your storage after having flashed the roms...... did u hold the two soft keys on the keyboard whilst pressing the reset button and then selecting 0 to clear the storage.
Failing that I wouls use MTTY to restore your DOC.
@mehegazy: if my device is locked how did i install wm6 at all? i can install wm6 and wm5 without a problem, and i can install programs manually...works perfect. problem seems to be with specific roms that install programs automated at startup.. Also removing the shortcut from the startup actually doesn't resolve the problem, cause that means that program is not working...
@beast0898: i ve cleared the storage, that can't be the problem..
Funny thing is, after reboot it installs some programs and resets without a problem. But i see that some programs are installed and some of them has blank icons that do not launch..
Also is there a wm6 rom that actually modified for the best performance of system + without apps?
thanks all for helping
Hi Guys
ive got my old htc tytn II/kasier/stella on o2, and i want to use it with my t mobile sim card in it.
I know it works ok with it in to start but if i want to wipe the device completely getting rid of all the o2 software is there a way being able to put tmobile or ideally back to the HTC software on it?
Thanks in advance
All depends on you really. If you keep your current rom and manually delete the o2 software. Every time you Hard reset (which we tend to do from time to time/or should I say forced to sometimes) you would have the software back and would have to delete over.
In my opinion you should install Hardspl (**Very Important**) then flash the original htc roms (Why not take the oportunity to try a modded rom. I recommend Sleuth V3 WM6.1, which can be found on this forum. After installing HardSPL rename the image file to KAISIMG.nbh and place in root of memory card (so \KAISIMG.nbh) the hold camera button whilst pressing reset button to go into bootloader. Press power to flash then soft reset once done and enjoy..
Hope this helps!!
DONT FORGET TO INSTALL HARDSPL FIRST THEN MAKE SURE YOU HAVE FULL BATTERY.
diigibio
cheers for that ive just installed and ran Hardspl, currently finding a rom to run on it now.
how do i rename the current image file?
Take the RUU_Signed.nbh (once downloaded) then right click in either Vista or Win XP, click rename. Then type KAISIMG.nbh and hit return key (Enter). Copy this over to your microSD card. MUST BE ROOT FOLDER (i.e. C:\KAISIMG.nbh where "C" would be the drive letter if connected via card reader etc)
Hold the camera button and press the soft reset button at the bottom (Keeping hold of the camera button) until Coloured screen comes up and then goes into bootloader. It will list what is included in the rom (i.e. Radio, splash, Image) Take note of this... Press power button to flash (FULL BATTERY RECOMMENDED) Wait and just after several minutes it'll finish. It is suggested that once you have flashed the new image to then perform a hard-reset "Two soft keys and soft reset button" this helps to clear out any left overs from previous rom and helps eliminate incompatibilities with software etc etc.. Although, not always neccessary it is recommended.
On a further note, not all roms include a radio image. Which is why it is recommended to take note of the screen you saw before flashing. As an incompatible radio can leave you without audio (Speakers, voice, signal etc) Although, if you download a rom without a radio, if you check their listing they usually recommend a compatible radio and usually link to it.
You can also flash this radio in the same way. Rename to KAISIMG.nbh, place in root of microSD card and enter bootloader (same way as before) if you check what is included you will just see radio listed instead of splash, rom etc. Once flashed just reboot and you should be good to go!! So don't panic there is always someone here to help. Providing you use search to your fullest capacity and ask in the right places without attitude.
Good luck and hope this helps.
diigibio
I went to \\\registry\HKLM: and was scrolling when i accidently renamed one of the folders to "d"....now my tp freezes. i can launch total commander but not do much else. can someone take a look and let me know what to rename the folder?
inside this folder, there's subdirectory with:
-htc
-ia stytle
-l&h
-microsoft
-midi engine
-scansoft
The remaining folders under \\\registry\HMLM\:
Audiocompression
buttonapps
comm
controlpanel
d [what's the name of this directory?]
drivers
dirvers32
explorer
extmodems
hardware
ident
init
loader
mui
nls
platform
security
services
snd
software
system
tapi
telephony
time
windows ce ser
windows ce tools
The only thing I have that you don't is WindowsLiveBak
tried that but didn't work. any one else? at this point, i've tried to hard reset but even that doesn't work.
webazoid said:
tried that but didn't work. any one else? at this point, i've tried to hard reset but even that doesn't work.
Click to expand...
Click to collapse
Hard Reset has to work...Cuz it restores default everything.
Hi Webazoid, I just checked and there is no other folder starting with "d" except the ones you mention.
Just hard reset to restore the original ROM.
Good luck.
Robin
HTC Touch Pro
KPN/SYMPAC Netherlands
8 GB SDHC
robinvanbergen said:
Hi Webazoid, I just checked and there is no other folder starting with "d" except the ones you mention.
Just hard reset to restore the original ROM.
Good luck.
Robin
HTC Touch Pro
KPN/SYMPAC Netherlands
8 GB SDHC
Click to expand...
Click to collapse
he renamed the folder to d so it could start with anything.
to help him out go through your hklm registry and see what folder you have that he doesn't. and it should have the contents of what he initially posted.
webazoid said:
tried that but didn't work. any one else? at this point, i've tried to hard reset but even that doesn't work.
Click to expand...
Click to collapse
you probably attempted to hard reset by going to clear storage in settings right?
if so hold down the volume down and center button, then press the stylus in the soft reset hole. Keep holding down volume down and center until it comes up with a message on your screen saying its gonna clear all data yada yada and there you go.
IF that doesnt work.. i guess re-flash the rom.
i just hard resetted. works fine now. lost all settings though.
Too late, but it was the Software folder, based on the content you list.
I know you already have a Software folder but it was probably recreated empty by some program.
I installed 'Fixed-Swype-HTCBlackBird-3.9.10.10.5032.cab' on my HTC HD2 today and the phone then went straight to the main restart screen requesting me to enter the keyboard password to get access to the phone but I am now unable to.
I have tried 'Hard Resetting' the device as below but cannot get the message to display for the reset.
Can someone please advise if there is a new sequence of no's to enter onto the start up keypad or an altertive way to Hard Reset while the phone is powered off.
I believe that the Swype keyboard may have conflicted the orignal keyboard hence screwing up any entries.
Kindly awaiting responses.
Thanks
Tony
-----
Hard Reset : steps tried :
With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it. You will then see this message on the screen.
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
hello
"I installed 'Fixed-Swype-HTCBlackBird-3.9.10.10.5032.cab' on my HTC HD2 today and the phone then went straight to the main restart screen requesting me to enter the keyboard password to get access to the phone but I am now unable to."
i have the same problem
have i a chance without hardreset?
pleas help
network66 said:
hello
"I installed 'Fixed-Swype-HTCBlackBird-3.9.10.10.5032.cab' on my HTC HD2 today and the phone then went straight to the main restart screen requesting me to enter the keyboard password to get access to the phone but I am now unable to."
i have the same problem
have i a chance without hardreset?
pleas help
Click to expand...
Click to collapse
try connect to PC via AS after that delete from hd2 autostart some swype shortcuts (if there exst)
i can´t change to AS.
i see only my sd-card
HELP To Install Swype
Hey Guyz.. I'm sorry I'm a complete alien to this community. I wanted to install swype and i downloaded a cab posted on Xda Developers. Version 3.9 i guess. The downloaded file is a win rar file containing numerous files in the folder. I dont know now how to install it to my HTC HD2.. I copy pasted it to My SD card and then tried to hunt for a set up file that would install but no luck.. Please tell me how do i install. Sorry for my ignorance
Cheers
do not unrar the cab file. copy and paste in ur sd card folder and run it from there
This is a known problem and all the more reason it should not be distributed outside of the ROM's it was meant for. Installing the cab changes your device ID to TMOUS instead of LEO.
same problem
I have the same problem.
Is there any solution to the problem?
Would be really appreciated, thx!
Kind Regards
Scuzzor
yeah today i'm one of the victim also... does any1 have any solution for this...keep saying its the wrong password...now i cant enter my phone,huhu...plz help...thanks!
Problem fixed...hard reset the phone then everything is good,learn my lesson already,b4 trying any new apps backup your phone first !!!