I have a qtek9000 and a 2gb sandisk sd card. i downloaded
http://vidmes.com//Uni/ROMs/BeastyLeo/2.07.04.BL/Vanilla.rar
and installed it with no problems, system rebooted (before reboot i inserted sd card in) and started installing some cabs and finally rebooted once more.
My problem:
after startup i have this error message ""sddaemon cannot be opened. Either it is not signed with a trusted certificate or one of it's componets cannot be found. You might need to reinstall or restore this file"
and when i check programs i see there are programs that are installed but the icons are blank, and they wont launch.. i also tried rom ranju, same thing...
What am i doing wrong? I serached but i couldnt find any links, if it is posted somewhere, can u please send me a link at least
thnx
RE:
Did you unlocked your mobile, goto the sticky note on WM6 that tells you how to unlock your phone first
for the sddaemon message, goto \windows\startup
yo will find a shortcut for sddaemon, just remove it
Thanks
swunk said:
I have a qtek9000 and a 2gb sandisk sd card. i downloaded
http://vidmes.com//Uni/ROMs/BeastyLeo/2.07.04.BL/Vanilla.rar
and installed it with no problems, system rebooted (before reboot i inserted sd card in) and started installing some cabs and finally rebooted once more.
My problem:
after startup i have this error message ""sddaemon cannot be opened. Either it is not signed with a trusted certificate or one of it's componets cannot be found. You might need to reinstall or restore this file"
and when i check programs i see there are programs that are installed but the icons are blank, and they wont launch.. i also tried rom ranju, same thing...
What am i doing wrong? I serached but i couldnt find any links, if it is posted somewhere, can u please send me a link at least
thnx
Click to expand...
Click to collapse
Hi,
Sounds to me as though you have not cleared your storage after having flashed the roms...... did u hold the two soft keys on the keyboard whilst pressing the reset button and then selecting 0 to clear the storage.
Failing that I wouls use MTTY to restore your DOC.
@mehegazy: if my device is locked how did i install wm6 at all? i can install wm6 and wm5 without a problem, and i can install programs manually...works perfect. problem seems to be with specific roms that install programs automated at startup.. Also removing the shortcut from the startup actually doesn't resolve the problem, cause that means that program is not working...
@beast0898: i ve cleared the storage, that can't be the problem..
Funny thing is, after reboot it installs some programs and resets without a problem. But i see that some programs are installed and some of them has blank icons that do not launch..
Also is there a wm6 rom that actually modified for the best performance of system + without apps?
thanks all for helping
Related
A common problem, I guess - during installation the device stalled so I had to soft-reset it. But after that when I try to install the same CAB it immediately says "Installation of ... was unsuccessful". Even if I rename the CAB, the problem remains.
Does anyone know how to fix this? I guess I have to clean something up but where?
tried anoter targer ?
as in main mem rather then sdcard or flashdisk
Rudegar said:
tried anoter targer ?
as in main mem rather then sdcard or flashdisk
Click to expand...
Click to collapse
I don't even get to this point. As soon as I run the CAB for installation, it says "Installation unsuccessful"
ingenious said:
A common problem, I guess - during installation the device stalled so I had to soft-reset it. But after that when I try to install the same CAB it immediately says "Installation of ... was unsuccessful". Even if I rename the CAB, the problem remains.
Does anyone know how to fix this? I guess I have to clean something up but where?
Click to expand...
Click to collapse
This usually happens when a cab is selected to be installed on a storage card. Try installing to the device. You have that option.
hotdog53 said:
This usually happens when a cab is selected to be installed on a storage card. Try installing to the device. You have that option.
Click to expand...
Click to collapse
But I don't get to this point Let me explain again:
During the installation of the CAB (yes, I selected to install in on the card) the device stalled so I had to reset it. And now, as soon as I click on the CAB file to install it, it says
Installation of XXX.cab was unseccessful.
And that's it, I cannot do anything. Something must be cleaned up before I can install the CAB, I guess...
ingenious said:
But I don't get to this point Let me explain again:
During the installation of the CAB (yes, I selected to install in on the card) the device stalled so I had to reset it. And now, as soon as I click on the CAB file to install it, it says
Installation of XXX.cab was unseccessful.
And that's it, I cannot do anything. Something must be cleaned up before I can install the CAB, I guess...
Click to expand...
Click to collapse
What is the cab you're trying to install? For you having to re-set during installation means the cab is corrupted, and can't be downloaded anywhere. Try to get another download file for the app you want to install.
hotdog53 said:
What is the cab you're trying to install? For you having to re-set during installation means the cab is corrupted, and can't be downloaded anywhere. Try to get another download file for the app you want to install.
Click to expand...
Click to collapse
It is a game. I'll try to download it again, but I don't think it was corrupted. I remember that during the installation (after I've chosen where to install, etc.) the device was synching and doing other things so I thing it became overloaded and stalled.
Hi,
I have my Extended ROM writeable and have installed software to it, but after the second or third app, it said 0kb free. I looked and I couldn't see my program folders. I soft-reset and viola' Nada... Everything's gone and I'm back to the regular ATT Carrier crap.
Any ideas? Did I miss something here that's different with the WM6 ROMS?
Thanks,
classic symptom of not having the ext rom open for writing.
Okay, can I ask steps to open the rom for writing?
It seems odd that progs can write to it at least for a little bit.
Thanks,
get the zip file from message 14 on this page:
http://forum.xda-developers.com/showthread.php?t=343713&page=2&highlight=cappackage
run the first cab, do a soft reset.
run the second cab, do a soft reset.
write to the ext rom, do a soft reset. if the file you wrote is still there, your set. if not re-run the second cab till it "takes".
Hi,
I'm sorry about this post but there seems to be an anormous amount of information which doesn't make a lot of sense to me.
All I want to do is upgrade my palm treo 750 from win5.0 to 6.1.
I've downloaded the rom but it doesn't upgarade. So I need to figure out a way to flash this phone so it can be upgraded to any roms.
I have tried the Cheetahunlocker which doens't work. It gets stuck on 0% then times out.
Could someone please give me some basic instructions on the best way to do this on the treo.
I've done this on the TYTN2 whith no issues however on this phone, it seems to be a lot harder.
Thanks in advance.
Your device needs to be unlocked. You can do this by calling ATT and getting unlock code or by using Magic_Unlocker.
search
Also you will need to have the HardSPL installed which is Step 1 only of the CheetahUnlocker
I just did it yesterday so I know it works.
After you get the phone unlocked, name the ROM .nbh file CHEEIMG.nbh and then put it on the SD card
The start the CheetahUnlocker process as it enters the HardSPL process it will go ahead and run the CHEEIMG file and flash your ROM
(it works ! ) DON"T CHANGE THE RADIO !!!!
After doing that be sure and reclaim your ROM space - search web for Removing Ext ROM and do that process, hard reset and you are ready to go
Takes about 15 min!
jcrompton said:
After you get the phone unlocked, name the ROM .nbh file CHEEIMG.nbh and then put it on the SD card
Click to expand...
Click to collapse
Thanks for your info.
sigh..
The rom is an exe file...
I downloaded 7-zip, extracted the rom to a folder.
Looking through it, I am unable find the ROM.nbh file!
CHEEMING.nbh is already there..
What am I doing wrong?
Thanks.
artii said:
Thanks for your info.
sigh..
The rom is an exe file...
I downloaded 7-zip, extracted the rom to a folder.
Looking through it, I am unable find the ROM.nbh file!
CHEEMING.nbh is already there..
What am I doing wrong?
Thanks.
Click to expand...
Click to collapse
Sorry I forgot it was already named CHEEIMG.nbh -- just use it like I said above.
Copy it to the SD card, put the SD card in the device and after you have used Magic_Unlocker , connect via Active Sync and start the CheetahUnlocker process. This will start the three step CheetahUnlock process (really all you need is step one which will put the HardSPL in place) as that process fails the CHEEIMG file on your SD card will get flashed.
Hope this makes sense
Bottom line is that you will be doing an SD flash of the CHEEIMG.nbh file but it takes HardSPL for that to work. Step one of the CheetahUnlocker installs HardSPL (that will be all you need of that process)
remember!
THE SD FLASHING METHOD TAKES A REALLY LONG TIME. SO LONG YOU MIGHT THINK IT'S BROKEN. BUT IT'S NOT!!!!
caps with bold and red= great way to emphasize an important point.
Thanks for the info but I'm still running into trouble.
I copied the file to the SDcard but when running the cheetahunlocker, it give the same error at 0% ( error 206) something about the connection..
I notice that active sync turns off when the cheetah unlocker goes to the coloured screen.
Edit:
Also, should I be moving the CHEEIMG.nbh or just copying it to the SD card?
Thanks.
artii said:
Thaks for the info but I'm still running into trouble.
I copied the file to the SDcard but when running the cheetahunlocker, it give the same error at 0% ( error 206) something about the connection..
I notice that active sync turns off when the cheetah unlocker goes to to the coloured screen.
Click to expand...
Click to collapse
Did you run the MagicUnlocker first?
Is the CHEEIMG.nbh file in the root of your SD card? Try re-formatiing your SD card (FAT32 important!) and then putting the CHEEIMG.nbh file in place on the root of the SD card.
After starting the CheetahUnlocker the TriColor screen should come on and then it should go to a standard White boot scan. It will ask if you want to flash and you will be asked to confirm by pushing the Power button.
If you can ever get Step One to complete on teh Cheetah Unlocker you should be able to confirm that the HardSPL is installed by turing off Today screen (Red, end button) , then hold the left side button while then pushing the reset button. You will get a tricolor screen that lists your SPL version. If it is HardSPL on an unlocked device and there is a CHEEIMG.nbh file on an inserted SD card it will then automatically go to a White boot screen .....
If any of this sounds foreign to you then you need to familiarize yourself in the Wiki re SD flashing
PS do you have the NetFramework 2.0 installed on your PC? When you start the CheetahUnlocker are you getting the Treo device confirmation to install the 2 boot exe files that let the Treo go to the boot screen (you have to answer yes to both of these) - are you making it that far?
Yes I ran the unlocker which worked fine.
I formatted the SD card, copied the CHEEMING.NBH to it so it's the only file there.
No I run the CheetahUnlocker.exe , yes to disclaimer , then STEP 1 - I click FLASH SPL, then next, next etc.. I hit Update - next - next then the phone msg comes up asking if I want to run jumpSPL.exe - I hit yes and it goes to the tri colour screen, the active sync dissapears, the screen on the pc stays at 0% and then I get the error 260: Connection, check cable etc..
How is it suppoed to maintain a connection when Active sync turns off?
I did check and framework2.0 is present.
Thanks.
artii said:
Yes I ran the unlocker which worked fine.
I formatted the SD card, copied the CHEEMING.NBH to it so it's the only file there.
No I run the CheetahUnlocker.exe , yes to disclaimer , then STEP 1 - I click FLASH SPL, then next, next etc.. I hit Update - next - next then the phone msg comes up asking if I want to run jumpSPL.exe - I hit yes and it goes to the tri colour screen, the active sync dissapears, the screen on the pc stays at 0% and then I get the error 260: Connection, check cable etc..
How is it suppoed to maintain a connection when Active sync turns off?
I did check and framework2.0 is present.
Thanks.
Click to expand...
Click to collapse
I'm not sure exactly what is happening in your case but I do know that once a device of any kind enters the bootloader - Active Sync dies - AS is part of the OS and that no longer exists after the bootloader starts, I.e. Windows Mobile isn't really running any longer. the AS connection just gets it started.
I'm not too sure either.
I've unlocked the phone which worked fine.
When I run the cheetahunlocker, it doensn't get past the first step.
Should I be running Hardspl first?
What rom works best with the Treo 750? Link please!!!
What rom are you wanting to use? I have Treo750_WM6.1_WWE_Lite, looking for a more stable rom. Please list some or link them.
I tried both roms
the lite one and the normal one. I must say that the normal one is more stable - with the lite I had to do a reset at least one per day. with the normal version I did not do a reset at all...
Hi, did you resolve this CONNECTION issue? I'm having exactly the same problem.
Anyone?
hey everyone... i have a problem similar to these i think. I'll explain
i've done the magic_unlocker and i can do the 1st step of the cheetahunlocker. treo reset automatically and when i try to flash the rom the trilinear screen doesn't change to the blue screen which is the screen of the rom flash
anybody now why?
i have cracked my head the hole day and a still can't do it :S
artii said:
Yes I ran the unlocker which worked fine.
I formatted the SD card, copied the CHEEMING.NBH to it so it's the only file there.
No I run the CheetahUnlocker.exe , yes to disclaimer , then STEP 1 - I click FLASH SPL, then next, next etc.. I hit Update - next - next then the phone msg comes up asking if I want to run jumpSPL.exe - I hit yes and it goes to the tri colour screen, the active sync dissapears, the screen on the pc stays at 0% and then I get the error 260: Connection, check cable etc..
How is it suppoed to maintain a connection when Active sync turns off?
I did check and framework2.0 is present.
Thanks.
Click to expand...
Click to collapse
If it goes into the bootloader then you should be good to go. Both 750s i unlocked did this. However, if done correctly, the phone should go to a light blue screen where you will press the power button and flashing should begin.
na1kkkk said:
hey everyone... i have a problem similar to these i think. I'll explain
i've done the magic_unlocker and i can do the 1st step of the cheetahunlocker. treo reset automatically and when i try to flash the rom the trilinear screen doesn't change to the blue screen which is the screen of the rom flash
anybody now why?
i have cracked my head the hole day and a still can't do it :S
Click to expand...
Click to collapse
Are you doing the SD method or Desktop? DO the SD method and it should begin flashing right away after the 1st step of cheetahunlocker.
Hello ! I have a problem with my HTC TD2,i think i cought a virus,and now all my aplications work realy slow and i have many errors...does reinstaling windows will get my phone back fully operative?how do i install windows mobile...step by step?
Thanks
just do a hard reset, it will restore the device in factory settings.
EqX
gps
thanks.also,it seems that i have a problem instaling a GPS program,such as iGO8 .The device gives me 2 errors,one wich tels me that cant copy a specific file from the sd card,and the other,when another soft is instaled,to put in the original sd card....any solution guys? 10x
BlonduCV said:
thanks.also,it seems that i have a problem instaling a GPS program,such as iGO8 .The device gives me 2 errors,one wich tels me that cant copy a specific file from the sd card,and the other,when another soft is instaled,to put in the original sd card....any solution guys? 10x
Click to expand...
Click to collapse
Hey,
What is the other software ur trying to install? Have you previosuly uninstalled it and trying to re-install?
Can you give us the exact error code it gives you?
Of course, no point in installing anything if you havent hard resetted yet
same program,diferent errors,first error without code,says like this "program application database cannot be found.please insert original application SD card" and the other " /storage card/desfacut/2577...cant copy autorun_8.nng "
BlonduCV said:
same program,diferent errors,first error without code,says like this "program application database cannot be found.please insert original application SD card" and the other " /storage card/desfacut/2577...cant copy autorun_8.nng "
Click to expand...
Click to collapse
The error message comes from a patched igo, not the original version
So it is warez help.
Thread closed
Hello Friends.
My English is not very good but let me indicate the beginning'll try to explain.
I bought the device from last year's TR TURKCELL un rom convert was 6.5.
My job, I had to return 6.5 to 6.1 sees. I tried to go back a lot of things but I think the name of the error RUU_signed.nbh file with the name change CHEEIMG.nbh want to install after the following issue has occurred.
How do I do if I've stayed if the bootloader. Now red, green, blue and white colors on the screen there. When a screen comes up gray. when I press the camera, restart button does bootloder screen.
On Screen
Palm TR
IPL-0.20
Palm TR
SPL-0.24 0000
Writes...
USB and PC hardware in the device is visible. Can not connect to the bootloader in the Active SYNC.
I researched the Internet to the device I need to take the original rom. A lot like the original Treo750_Cingular_ROM called Treo750_2.23_ROW_WM6 ROM file I tried did not take. As enhancements on a PC via USB, but does not do installation DesktopUpdater. I tried with SD card, makes installation , BOOT Ok GSM gives OK, but gives FAİL Errors on OS install. At the end of the installation gives the error bar. I'm normal with FAT32 formatted SD was snow. SD card would install the original file 1.16RWE_CHEEIMG.nbh. camera, I would hold the restart button. to install the device, while 1% is automatically rebooted. I also want to install the self-RADIO reboot is 7%.
As far as I understand with; device when large files at 1% at small-sized files when closing at 7% has been reopened
devicereset, Hard-SPL, Treo750_OS5_2_19199WWE_STD, Original 1.16RWE.nbh, Treo750_2_23_ROW_DE_DesktopUpdater, completefixed, I tried almost everything, but the installation does not do..
I need this device too. I am electronics technician. Heard called JTAG recovery method.
Luckily the apology, that I am open for any ideas. but you'll help me. Tek Tek at a descriptive writer, you'll be happy. I trust you. As of this minute to thank every one, wish to express my respect and greetings
Based on your bootloader screen you have not successfully HardSPL'd your Treo. You need to do that first, and then flashing ROMs with the SD card is possible. You can't flash a ROM using the SD card without doing this.
You also can't downgrade a ROM using the regular installation packages because the install package will see the current ROM (if I understand you correctly, WM6.5) is a newer ROM than what you are trying to install. I think I remember seeing a post someplace where you can edit one of the files in the installer package to get it to work, but you would have to search to find it and even so, it's probably much more difficult to do than just doing the Hard SPL.