Database Info

Number Keys Don't Work In-Call

Hi All,
This is driving me nuts - posted before in "TNT" discussion but didn't get a response.
I am unable to use any number keys when in a call. Can't "select 1 to reach...blah blah blah" or press "7 to delete this message", etc.
I've installed, re-installed TNT, tried different radios, etc. Only seems to happen with TNT, but would like to keep it as the other features are great.
Anyone have a fix or suggestion? Here are my pertinent stats:
ROM: TNT.1933 TouchFLO Edition
I/SPL: 2.25
Radio: 2.19.11
OS: 11.0.0.1
Any suggestions would be massively appreciated as I do NOT want to have to uninstall TNT again, futz around and re-install (it does seem to work for a short while after doing so, but then stops, and what a pain in the arse!)
Thanks,
-tynk-

This is junk TNT issue!

got same rom and dont have this issue..
you just have to press the left button which says "keypad"

Sorry, should have been more specific, but I've got the flu, so not on my toes!
I can view, press, and even hear the keytones in call, but they do NOT register on the other end. No matter how many times I press "7", and hear the tone, voicemail doesn't hear it (I end up with a full mailbox pretty quick!) Or when trying to "press 1 for...", I can press 1, hear the tone, but the system on the other end doesn't register it.
Okay, it may be "junk TNT issue" (or it may just be related to TNT in that one of the progs bundled in TNT or settings I've ticked is the culprit), but what ROM or fix do you recommend? Not a particularly helpful post? Why bother?
Thanks!

I had the very same problem. Check out this post as he answered the question for me...
ADB100 said:
Yep, I had this issue. The solution is simple however - change the following in the registry:
Code:
[HKLM\Drivers\BuiltIn\RIL]
EnableDTMFSupport=0x0
In previous ROMs it looks like the setting 0x00000001 enabled DTMF support and in this ROM 0x00000000 enables it.... Bit weird but it worked for me.
Andy
Click to expand...
Click to collapse
It worked perfectly for me.
Thanx.

yup that is the only thing it can be
the problem was allready solved ..

dumb
maybe I'm a real dumbass but how (TF do I get into my Qtek's Registry?? I cannot find anything about that in the forum
NEVSKI

Got It!!
I used CeRegeditor and that did the job for me: in registry find DRIVERS\BUILDIN\RIL\ and put EnableDTMFSupport on 0 (it was on 1) strangly after reboot it works for me! (and before you change or open anything first 'unlock registry' in de CeregEditor (tools)
NEVSKI

if you dont know how to get into the registry there is a cab floating around that correct DTMF tones and I think some software. I had this issue on a rom and I downloaded a cab that fixed it. If I find it on my computer I will post it for you. Do a search for DTMF tones.

Automatically add number after call

Hey Guys,
I have a simple question (I think), but can't seem to find the answer...
After calling an unknown number normally my phone asks me if I want to save that number to my contacts. Today however, I wasn't thinking and accidentally clicked "Don't ask me this again" in staid of the "yes" button.
I would like to switch that option back on, but I can't seem to find the option... I've searched in my phone settings, Google and the XDA-Forum.
I'm kinda PPC noobish, so I don't know if this is a standard WM6.1 function or if this is a function backed into the ROM I flashed onto my HTC-Touch (the ShadoW 2.0 ROM by Cloudyfa (http://forum.xda-developers.com/showthread.php?t=363637)).
It's a small thing, but something I find useful to use so I hope someone can give me the answer Thanks in advance!

Anyone?
Can anyone tell me how to do this? I mean, if I can switch it off, there must be a way to switch it back on...

Strange behaviour when searching contacts...

Hi to everyone,
probably this has already been investigated and/or solved (or not), I don't know, but I was not able to find anything related and I believe it is quite strange...
I was used (using WM6.0) to search contacts using keywords being present in the record in the following way:
- Open contact application (the application opens with the first line ready for input);
- place some text in the first line, such as "Richard"
- being presented from the application a list with ONLY contacts containing the word "Richard", either in the name, company name, address, notes, etc.
Well, I find this being impossible with my brand new VODAFONE TOUCH PRO (Raphael) I recently got:
- I open contact application (nothing strange till here...)
- I type just one letter (i.e. "R")
- the PDA immediately switches to PHONE MODE, placing a call to my first contact (I think so, havent been able to double check yet) whose name starts with "R" letter...
- I obviously have to immediately abort as I don't want to place an unwanted call...
This way the only chance I have to search my contacts is to PARSE them by hand, but having more than 2000 it's a really waste of time, beside the fact I can select the first letter the name starts with (and so no chances to find the keyword appearing in other fields...).
Is anyone else reporting the same problems ???
Is there some kind of setup setting I'm forgetting of ???
Really considering not to trash my BB...
Ciao

I wonder myself being the only one reporting such a problem and/or not being receiving any answer...
So I try raising my message up to your attention...

I've got the same problem. Its actually a little weirder than you wrote. Most letters work fine.
Pressing 'r', however, automatically dials whatever name you are on. Pressing 'w' inserts 'w*', which breaks the search (you can delete the * and then continue).
There may be other letter problems too. This is on a Sprint Touch Pro.
Anyone else?

BTW, the hard keyboard works fine.

I wonder if this problem exists also in other applications such as SMS??
i sometimes face a problem while writting an SMS, i press a character but suddenly i find the dialer activated...!!!
does this has anything to do with special characters?

"R" and "W*" on Sprint Touch Pro Contacts Search
I wish I had a solution, but can only chime in that I have had two Sprint Touch pro's and both have the same problem. If you call sprint, they haven't heard anything about it (supposedly) but it seems to be a problem with all sprint touch pros.

I have the same problem with my Sprint HTC Touch Pro. Don't know how to fix it. Can anyone help?

flashed with SNN ROM - problem with bluetooth and redial

hey guys.
i'm pretty new at this. i unlocked my phone way back over a year ago, but didn't do much other than add a bunch of programs and emulators. never flashed the rom....until yesterday night.
now i have IPL & SPL 3.08, Radio 2.71.11, OS 10.0.0.10 (i think) and flashed with SNN Diamond.
i'm having two problems (so far anyways):
1. bluetooth is not working right. i can connect to other phones. i can connect to the car bluetooth system and i can hear other people. but they can't hear me. this is a pretty big deal because i need to use bluetooth! how can i fix this problem?
2. this is not essential but it's annoying. when i hang up a call, i can't press "call" from the same screen (i.e. redial) because nothing will happen. it doesn't matter if i press the call button on screen or the actual hard button, the dialer wont call unless i go into phone book or history or otherwise enter the a number. just can't redial how do i fix this?
any help would be greatly appreciated!

Max_Pain said:
hey guys.
i'm pretty new at this. i unlocked my phone way back over a year ago, but didn't do much other than add a bunch of programs and emulators. never flashed the rom....until yesterday night.
now i have IPL & SPL 3.08, Radio 2.71.11, OS 10.0.0.10 (i think) and flashed with SNN Diamond.
i'm having two problems (so far anyways):
1. bluetooth is not working right. i can connect to other phones. i can connect to the car bluetooth system and i can hear other people. but they can't hear me. this is a pretty big deal because i need to use bluetooth! how can i fix this problem?
2. this is not essential but it's annoying. when i hang up a call, i can't press "call" from the same screen (i.e. redial) because nothing will happen. it doesn't matter if i press the call button on screen or the actual hard button, the dialer wont call unless i go into phone book or history or otherwise enter the a number. just can't redial how do i fix this?
any help would be greatly appreciated!
Click to expand...
Click to collapse
Hi,
1. Try using other bluetooth device and make sure it is working in other device. Make sure "Receive all incomming beams" is ticked ( i.e Go to Start Manu -> Settings -> Connection Tab -> Click Beam and tick "Receive all incomming beams" then OK )
2. Use phone canvas. I think it takes mode memory but it is very good.
See this link
Plz Reply
Thanks
Srikanth.K

thanks. got the bluetooth working now
now i'm trying to figure out how to use phone canvas 'cause it's installed but i can't find it anywhere
but now i dont have to remove this ROM
EDIT: so apparently my attempt at installing the skins from the link you gave me are not working (well, they dont show up) because i need to install phonecanvas first? i found the link on the forums and i'm trying to install the file but after taking a while installing it, it ends saying it was unsuccesful...can you help me with that?

Max_Pain said:
thanks. got the bluetooth working now
now i'm trying to figure out how to use phone canvas 'cause it's installed but i can't find it anywhere
but now i dont have to remove this ROM
EDIT: so apparently my attempt at installing the skins from the link you gave me are not working (well, they dont show up) because i need to install phonecanvas first? i found the link on the forums and i'm trying to install the file but after taking a while installing it, it ends saying it was unsuccesful...can you help me with that?
Click to expand...
Click to collapse
Hi,
Go to this link ( by MBarvian ), download and install.
Make your uninstall all the dialer skins if you have installed any..
Bye 4 Now

well the problem is that file wont succesfully install.
i can't remove the dialer skin i have now because it was cooked into the ROM. there's no setting or option anywhere that i can find to remove it. frankly, i love the way it looks. so i'm going to stick with it for now and see if it's not totally unbearable.
if i see i really can't stand not being able to redial i'll get back to this thread. thanks for the help so far

CyanogenMod - SMS-Service Settings

Hi,
I'm just wondering where I can change my Provider Settings for the SMS-Service in Cyanogen-Mod.
Thx
Jubei

What exactly do you mean by "provider settings"? If you're reffering to the SMS center number of your operator, that can be changed by the hidden menu in the phone:
1. Open PHONE dialer (not working with some alternative dialers so that's why I've said to use the original Android dialer)
2. Dial (as a number): *#*#4636#*#*
3. Wait a sec till you got the hidden menu
4. Choose Phone Information
5. Scroll down to SMSC (SMS Center)
6. Either press Refresh or type in the SMS Center number from your operator, then press Update
7. Press "back" buton on your phone till you reach homescreen again
Note: Pressing Update without having something in that field, will efectively erase the actual stored number (if any). No SMS will be send in that case

Thank you so very much you just helped me big time.

It is not working at all with me
Dear All,
I have just tried all those steps
when I write the smsc in the testing application and click update it is stored in a strange format like this Number,129 ... what ever i entered it in the pdu format or the 12 number format it is not working
I have tried to put my sim card in a simple nokia phone and it is working there but not on my galaxy tab
Please help

I was using my SGS (i9000 galaxymtd) just for media, internet, game etc purposes, in other words, not as a phone as i own a HOX, however, since i have dropped my HOX a couple of days ago and got a broken display, had to leave it for repair and came back to my SGS. Apart from the spontaneous reboot -on its own- issues which could be endured for a short period of time, but sms (?). I am trying to keep my SGS alive thanks to CM, and now i am really surprised (badly of course) how such an important, even one of the main parts of a mobilephone usage could be disregarded by CM. I have tried the solution adviced above, with no success; tapping on "update" button after entering smsc number turns "error", refresh button puts "00" (doubled zero) into that field, nothing else happens. Surprisingly i can receive sms, but sending is not possible. "Sms service center" should be somewhere in settings in sms application, or somewhere under network settings in general, but no, nowhere. Really annoying. Since i will not use CM as my daily driver, i do not really care actually, but just wondering; 1) is it only me who simply cannot find it, 2) how to fix it?
SGS Galaxy I9000 - Galaxymtd, Cyanogenmod version 10.1.3-RC1

iLHaNroID said:
I was using my SGS (i9000 galaxymtd) just for media, internet, game etc purposes, in other words, not as a phone as i own a HOX, however, since i have dropped my HOX a couple of days ago and got a broken display, had to leave it for repair and came back to my SGS. Apart from the spontaneous reboot -on its own- issues which could be endured for a short period of time, but sms (?). I am trying to keep my SGS alive thanks to CM, and now i am really surprised (badly of course) how such an important, even one of the main parts of a mobilephone usage could be disregarded by CM. I have tried the solution adviced above, with no success; tapping on "update" button after entering smsc number turns "error", refresh button puts "00" (doubled zero) into that field, nothing else happens. Surprisingly i can receive sms, but sending is not possible. "Sms service center" should be somewhere in settings in sms application, or somewhere under network settings in general, but no, nowhere. Really annoying. Since i will not use CM as my daily driver, i do not really care actually, but just wondering; 1) is it only me who simply cannot find it, 2) how to fix it?
SGS Galaxy I9000 - Galaxymtd, Cyanogenmod version 10.1.3-RC1
Click to expand...
Click to collapse
Same problem - Same phone SGS Galaxy I9000 Cyanogenmod ver. 10.2.1 / android 4.3.1

Steebe said:
Same problem - Same phone SGS Galaxy I9000 Cyanogenmod ver. 10.2.1 / android 4.3.1
Click to expand...
Click to collapse
I have a OnePlus One A0001 CyanogenMod version 11.0-XNPH44S Android version 4.4.4, and have that exact same problem. I've tried with 4 different text-messaging apps, did the Testing hidden menu thing (no error after doing Update, it just did nothing), and still if my phone is not online (either wifi or data), it will not send (or receive for me) any SMS.

[/URL]

hy guys, actually i just lost these setting can you tell me how to revert it back without reflashing rom? *#*#4636#*#* i cant use that too