No GSMFFS Error!!! Unable to Install Firmware... Asus P320 - General Questions and Answers

My P320 had started actin out lately... started to hang every couple of hours n so. I was thinkin it was probably the repeated adding and removing of applications. So thot I would do a firmware reinstall. Somehow somewhere during the upgrade the process stopped... it did not respond for like half an hour. so i had to take the battery out and reset. However from then on every time I try a Firmware upgrade I get the "No GSMFFS" error and the installation stops.
Can someone help me understand what GSMFFS is???
Also is there a way to fix this error??? I am getting the Bootloader prompt. It is even finding the image files. But then it says " No GSMFFS. 3 images found" and stops executing.
On a related topic. There seems to be an option to Upgrade the firmware using USB... Has anyone successfully done that???
Please advice!
Joe!

Someone anyone???

me same this
mi p320 same this proble....pls help!

I've been searching here and there for two years for a fix, please, someone, tell us how to fix our phones!

Related

Failing ROM Update Jam. Error 112 CE Failed

Ok I am at the end of my wits here.
I tried to do an Upgrade of my Imate Jam to the latest Rom on the Clubimate site
But it got stuck on the checking site. So after a bit of research I found that if I unplugged and reset it, it should take the upgrade and it looked like it would Except
On the CE update it gets Stuck at 7% and gives me an ERROR 112 CE Update Failed.
I have tried many times to get it too work rebooting each time.
I have tried on 3 different Machines in case it was the USB Hub Problem.
I even tried the S100 rom with the Country code hack and it even got stuck on 7% same error.
Please Help
SciberWolf
sciberwolf said:
Ok I am at the end of my wits here.
I tried to do an Upgrade of my Imate Jam to the latest Rom on the Clubimate site
But it got stuck on the checking site. So after a bit of research I found that if I unplugged and reset it, it should take the upgrade and it looked like it would Except
On the CE update it gets Stuck at 7% and gives me an ERROR 112 CE Update Failed.
I have tried many times to get it too work rebooting each time.
I have tried on 3 different Machines in case it was the USB Hub Problem.
I even tried the S100 rom with the Country code hack and it even got stuck on 7% same error.
Please Help
SciberWolf
Click to expand...
Click to collapse
Could be the rom you downloaded not complete or there is file error. Try download the file again and extract to a new folder.
Check on this page. Use the no ID file to start the flash.
http://forum.xda-developers.com/viewtopic.php?t=18550&start=25
Goodluck.
Thanks for the reply OCMAX but no go
Tried downloading the File again From Clubimate and XDA-Devs FTP no go
Tried with the No ID updater as well but it is still getting stuck at 7%.
The weird thing is it always gets stuck at 7% even if it is another Rom Image.
The only thing I have not tried is the Original Rom image that came with the
Imate Jam because I can’t find it. Anybody have it?
Any other subjections. Im now at 27hours without my PDA not that I’m
Counting
SciberWolf
sciberwolf said:
Thanks for the reply OCMAX but no go
Tried downloading the File again From Clubimate and XDA-Devs FTP no go
Tried with the No ID updater as well but it is still getting stuck at 7%.
The weird thing is it always gets stuck at 7% even if it is another Rom Image.
The only thing I have not tried is the Original Rom image that came with the
Imate Jam because I can’t find it. Anybody have it?
Any other subjections. Im now at 27hours without my PDA not that I’m
Counting
SciberWolf
Click to expand...
Click to collapse
Did you do hard reset the first time you face the 7% error and you are now in the USB v1.0 bootloader mode now?
I had the same problem with a friend's QTEK S100 it was stoping with an upgrade error at the very beggining of the extended ROM flashing no matter which ROM you were flashing to it! At the end they exchanged it for a new one, probably the ROM chip was faulty!
MDA Compact does not open HELP!!
Hello everyone,
I'm new to this board and I read nearly all threads about MDA. I bought my T Mobile MDA Compact 2 weeks ago from Germany. Yesterday while I was trying to change its language to English its locked. I installed Windows 2003 SE then device restarted but not open anymore. Now I can not open it. When I try to open it on the top of the screen it writes "Seial" and at tthe bottom it writes "1.00 Version". What should I do? I need immediate assistant; can anybody help me to make my MDA Compact working again?
Thanks
AE

ROM picture Change Error

Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan
iskhan said:
Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan
Click to expand...
Click to collapse
First did you do everything in this post?
iskhan said:
Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan
Click to expand...
Click to collapse
you have vista then your prob better off flashing via sd, also you shouldn't have started a new thread to ask this question, this forum isn't intended for every time someone has a problem and searches and can't find the answer to start a new thread. PM someone you see posting that seems knowledgeable and ask that person if you can't find what you are looking for.
Flashing through SD is always the best. And its a lot safer than USB way.
Thanks for the help guys... closing thread as this issue can be fixed by reading the sticky and also the wiki..
Peace,
Josh

Error [302] : Update error

During a ROM flash yesterday I got a STOP unsigned driver message. I clicked continue but I've ended up with a persistent ERROR [302] : UPDATE ERROR message.
At first I thought I'd bricked my phone. No matter what I did or I couldn't sort it and I even tried a search here on XDA but couldn't find anything useful that worked.However I'm lucky enough to have more than one PC so I simply flashed the phone on another PC.
This worked first time so I've now successfully flashed the phone. I'm posting here as it my help someone else in a similar situation. I still haven't found out why ROM update utilities no longer work on my main PC but I'll get to the bottom of it when I've more time.
I had the same problem too and thought that my phone is bricked. It wasn't a good feeling at all right?

samsung kies install problem ( admin pls move to correct place, didnt find)

Hi,
hope someone can give me some tips.
Dunno if this is a problem with the norwegian windows, but:
Mi girlfriend just bought the wave s8500, and cannot install kies.
Extracting is ok, even get to the part where you can choose the items to be installed. when click "next" it starts to install for a few secs, then stops.
error is something about installation failed, installation ended prematurely.
anyone have a tip?
thanks for any help.

[Completed] Please Help, secure booting error lg optimus f3 LG MS659

I keep getting a message on the LG startup screen, that says,
"secure booting error
cause: boot certification verify"
My phone was rooted using king root almost 6 months ago, and I had no problems with it. Until around a month ago, it started getting real slow and apps would randomly stop. So I decided to format the phone. There weren't many problems after that. but after a while it started getting slow again, but slower than the first time. One day almost every app closed and "LG Home" would close, it would give me some kind of error. I turned it off and tried turning it back on, but that's when I got that error. At first i thought my phone was bricked, i still sort of do, so I tried several methods. I can only turn the phone on in download mode, and my computer recognizes it as an android device.
At first I had some problems because i couldn't find my right .KDZ file, I used KDZ Update and I tried using LGFlash tool, but i can't find any of the files (.bin . dll) I need. I've also tried using the 2014 version of the LGFlash and used the LG Mobile Support tool, and nothing! They all take around 4 to 5 hours to finish!!! It never says there's an error or anything, none of them do! They always finish successfully, but the same thing keeps happening. Every time the phone reboots, it gets stuck on the LG logo and i get the secure booting Error!! What else can i try? Any suggestions? Am i missing something? All drivers are installed correctly and I've tried on windows 7, 8 and 10! Is there anybody who can help me? What do you think the problem could be? What causes the "secure booting Error!"?? :crying: :fingers-crossed:
ricardoryz said:
I keep getting a message on the LG startup screen, that says,
"secure booting error
cause: boot certification verify"
My phone was rooted using king root almost 6 months ago, and I had no problems with it. Until around a month ago, it started getting real slow and apps would randomly stop. So I decided to format the phone. There weren't many problems after that. but after a while it started getting slow again, but slower than the first time. One day almost every app closed and "LG Home" would close, it would give me some kind of error. I turned it off and tried turning it back on, but that's when I got that error. At first i thought my phone was bricked, i still sort of do, so I tried several methods. I can only turn the phone on in download mode, and my computer recognizes it as an android device.
At first I had some problems because i couldn't find my right .KDZ file, I used KDZ Update and I tried using LGFlash tool, but i can't find any of the files (.bin . dll) I need. I've also tried using the 2014 version of the LGFlash and used the LG Mobile Support tool, and nothing! They all take around 4 to 5 hours to finish!!! It never says there's an error or anything, none of them do! They always finish successfully, but the same thing keeps happening. Every time the phone reboots, it gets stuck on the LG logo and i get the secure booting Error!! What else can i try? Any suggestions? Am i missing something? All drivers are installed correctly and I've tried on windows 7, 8 and 10! Is there anybody who can help me? What do you think the problem could be? What causes the "secure booting Error!"?? :crying: :fingers-crossed:
Click to expand...
Click to collapse
Hi, Thanks for using XDA assist
It looks like there is no dedicated forum for your device, however
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck.

Categories

Resources