Database Info

Cingular MMS Synchro Error / Media Mall Email Problem

Through four different ROMs (Xplore 1.1, 2.0, and CB RL, currently using 2.0 BB), I've repeatedly had the same issues when everything is loaded and done:
1. In MMS, when trying to Send/Receive, I get an error "Error Synchronizing". Now the messages do seem to go through, if I create one and send it to myself I get the message back, but I'd like to understand why I still get this error.
Q: Is there a "event viewer" or error log that can help identify the issue?
2. Unable to receive emails from Cingular Media Mall to download purchases.
Observation: After requesting the download from the Cingular Media Mall website, the CPU utilization goes up to 30% for a few seconds, then back to 1 or 2%, as if it is seeing an incoming message, but can't accept it? Text messaging seems to work okay, such as *646# or just a phone to phone message.
I've attached the CABs that I've found that set internet / MMS settings, and I've verified them against the Cingular site and what I have on the phone.
I've done as suggested in other threads, to take the newly flashed phone, and before doing anything else, install the MMS and internet settings and try it - but it responds exactly the same.
I've taken the SIM and tried it in my stock 3125, and both work fine, as well with the stock WM5 official rom in the Wizard.

Hmmm...
Just loaded the Crossbow Faria Edition, and the SMS from Cinguar worked. I had gone through the SMS settings a few times, but it sure appears that's where the issue was. I'll dig through the settings to see what's different. There may be hope afterall...
As far as MMS goes, there wasn't a MMS config, so I ran the WAP cab, and tried MMS again. Still the same sync error still came up, though it sent and received is okay.

Same goes on T-Mobile. I seem to receive MMS' just fine but I'm not sure how long ago the person sent it. Last night, it took about 20 minutes to receive the MMS I sent her.

Update
Well, it seems the Faria Crossbow definetly is a step in the right direction, in that now the SMS appears to be working correctly.
There's still a hitch though with the Media Mall though, in that once you click on the link, you get an error message in the browser that says "an unexpected error has occured". Also still haven't nailed the MMS sync error yet.
I still wonder why I bother, but I hate when something doesn't work...
Going to flash back to a more vanilla rom though, too much stuff...

I had this issue as well. the cab files weren't actually installing the mms settings. i had to put them in manually and the sync issue went away.

Gotta be magic...?
Okay, tried Xplore 2.0 again, and still can't get the MMS/SMS settings right. The MMS cab adds the GPRS settings or MEdia and My ISP, but couldn't get SMS working. Arrg!
Starting to feel like this shouldn't be so darn hard, but I went back to the Faria Crossbow rom, which has all the setings included and working. Even tried to cook my own rom, but don't understand enough about adding stuff to get it right.
Maybe there's a way to extract an XML with all of the networks settings for all modems from an existing phone?

i use the p_conn..... cab. I have never had an issue with sms or gprs/edge using this cab. With MMS, i have to set the server info manually.
Have you manually checked to see if an mms server is listed or does it only have a sample server or no server at all?
Are you using My ISP or Media Net as your internet network?

mattk_r said:
Starting to feel like this shouldn't be so darn hard,
Click to expand...
Click to collapse
I honestly don't get it. All I run after flashing is the first cab in your post. MMS, GPRS, and SMS all work for me after that. I don't do anything else. Have you tried to call Cingular to ask them (but not telling them you are on a custom rom of course).
I've used that cab on NTS, Xplore 1.1, Faria Vanilla beta, and now my rom successfully.

btw, what radio are you running? Make sure you are using the Tmo 2.19 UK one with Cingular on WM6.

mfrazzz said:
btw, what radio are you running? Make sure you are using the Tmo 2.19 UK one with Cingular on WM6.
Click to expand...
Click to collapse
It is strange, because I took your advice and tried adding the cab you referenced after a fresh flash, but it only gave me GPRS, but no SMS. (I always do a clear memory after flashing just to be sure before adding/changing anything, including this cab). The only time I've gotten everything is with Faria's Crossbow - which I'm back to currently.
I'm running the 2.19 radio, and it's definetly better than the 2.25 that comes with the factory rom out here.
I've you've got a recipie that seems to work, please pass it on and I'll give it a try. I'm guessing it's the following process-
Reflash back to the official Cingular RUU
Flash the 2.19 TM radio (this seems the only time I can get the loader to work)
Flash the vanilla rom of choice (your remix or Xplore 2.0)
Clear Mem
Install cab
and it should work - or it works for you? These are similar steps to what I've been doing up to going back to Faria's, but maybe I'm missing something.

Issues with Alpha Wm6 Rom

hilo,
Just created a new thread for this as its issues are pilling up the other one. i think that thread should be clean and should have only and only contain info about progress on the wm6 rom...
Mods if unnecessary please delete...
Tejas

I would not call it a bug but one of the disadvantages of the ROM is that, similar to these ones which come to Qtek and i-mate, it does not recognise the network settings out of the box but you have to fiddle with them manually. When I use Orange ROMs (and it does not matter if the ROM comes from the UK or Switzerland) everything works with flying colours, despite I do not use any Orange network. Just I have to install Opera Mobile (I hate pocket IE) and voila! Everything works!

Channels don't work.

in india AFAIK channels just provide the cell id i.e the area which i m in... not imp though... no use of channels

ok phil.
if u remove windows update, at least supply it as a cab in the extras folder.
channels don't work.
long pressed side button does not work! it used to start voice note record for the sda and i'd like that to work.
mms.
better camera software. btw htc camera makes the phone SLOW..... not a good one. need an alternate
enable profile switching to silent when long pressing '#' key
default folder for saving pictures on storage card is not my documents\my pictures any more but a lame dcim folder. that would be nice to be changed.
also, sometimes when answering a call, the keyboard stays locked, the call is still on, but the home screen is active and not the call screen.
joystick seems much better but sometimes it doesn't want to work as it should. maybe another driver; if not, this one is good
we need wpa2 for wifi enabled.
also add in the extras folder:
moblue
tcpmp with extra codecs
htc audio manager could be good
if u need the cabs for moblue and htc audio, i have them
there is an newer version of sim manager. v6.10. has a couple of new things (got it if u need it)
and maybe add a good version of opera. not the java one.
we also need a good midlet manager
also a good instant messaging program. maybe a multi client one like oz mobile im, or like im+

mmmhhh after read all this bugs, i better wait a while to update my phone, i find a good idea to write here all the problems with the actually ROM.

Good AD2P drivers
Hi,
Is it possible to have good ad2p drivers with the next rom?

Tomtom 6
I have never been able to run tomtom 6 before the update.
Is it possible now with update? and also which is best version to install?
Kindest regards

I have Push mail configured and GPRS seems to be buggy. once or twice a day GPRS seems to stop working. My Activesync fails with (Can not connect to network or waiting for the network to be available), and in that mode even IE can not connect to any site. I switch off and on the phone function only, GPRS becomes available again.

boneym said:
I have Push mail configured and GPRS seems to be buggy. once or twice a day GPRS seems to stop working. My Activesync fails with (Can not connect to network or waiting for the network to be available), and in that mode even IE can not connect to any site. I switch off and on the phone function only, GPRS becomes available again.
Click to expand...
Click to collapse
Actually I would split your post in two separate ones.
1. the instability of WM6 Alpha - obvious thing, and it should be fixed
2. but I also see something else. I see from many posts that one application which sets all the settings with one click is quite urgently needed. I know that something like that exists for Swiss networks http://www.mysmartphone.ch/Freeware/kommunikation/16920.aspx and for the Norwegian ones http://www.smartmobil.no/Article617.phtml but I think that everybody would agree that such an universal solution would be something good. Unfortunately, I do not know anything about programming but I can imagine this kind of program and a separate database. The database would be filled by volunteers - I can, for example, provide all the settings of Polish operators, someone else British, French, etc. It would be good esp. for people who travel a lot.

unlocksmith said:
I have never been able to run tomtom 6 before the update.
Is it possible now with update? and also which is best version to install?
Kindest regards
Click to expand...
Click to collapse
TomTom 6 is made for Pocket PCs. It requires a touch screen to work, so you won´t be able to control it. I have had it running on my 8310 but it´s just silly to even have it installed. Go for 5.2 if you can find it.

I have problems syncing my contacts if i have more than 305 contacts.
The ActiveSync (or WMDC) hangs saying "attention required". Though, i can make 305+ contacts on the WM6 and sync them back to Outlook! But backwards i get 305 contact limit. Vey, very strange!
With previous ROM everything was ok.
I tried syncing with different PCs, tried unistalling ActiveSync and WMDC - no use. Deleting pim.vol doesn't help too.
ActiveSync on WM6 gives me 0x8503001c error.

Thanks for your help. I got my old one to work. I really like the colours in tomtom 6 tho.
Also on my phone i have a problem(s) with tomtom 5, I cant type in the post code B8 followed by anything like B8 3NU. Also I can't use certain Points Of Interest such as hospitals or cash dispensers. These work fine on my Wizard but I wana be able to do it all with TORNADO!

The software of dual sim selector don't works with that new rom (adapter of 10ª generation).
Well, I don't know if it works; the soft does not appear by any side.
I proved several solutions, but no it has worked to me.
Somebody can help me?
Thanks.

tejasphatak please rename the topic to "WM6 Torando bugs/issues" , so we can generally post bugs/issues regarding all WM6 tornado roms
Bugs:
1. The locklevel change to 1 randomly..
2. Sometimes the phone freeze when unloking kepyad.
It happened two times.
Issues:
1. When playing audio the CPU load is ~ 25-30% (@180 Mhz). It is normal ? (can someone with WM5 test?)
If using EQ and other effects the CPU load increase.
A taskmanager with cpu load info can be found here (it's for PPC but works also ,somehow, on smartphones)
More CPU load = more power = less battery
2. The system lags while writing to storage card (big cards, > 1gb). This issue is present on WM5 Tornado roms too (except iphone rom wich seems to deal better with sd).
Need a beter SD driver .
Same when copying via ActiveSync (has anyone tried usbfn driver from HTC VOX?)
3. when TCPMP is playing audio it keeps the backlight alive
Using andot's PEE V6.

bsider said:
I have problems syncing my contacts if i have more than 305 contacts.
The ActiveSync (or WMDC) hangs saying "attention required". Though, i can make 305+ contacts on the WM6 and sync them back to Outlook! But backwards i get 305 contact limit. Vey, very strange!
With previous ROM everything was ok.
I tried syncing with different PCs, tried unistalling ActiveSync and WMDC - no use. Deleting pim.vol doesn't help too.
ActiveSync on WM6 gives me 0x8503001c error.
Click to expand...
Click to collapse
Hello,
I've got a similar problem to this. It used to work fine until last week. I can't remember changing anything in my Hard/software setup but now it just hangs and only some of the contacts sync.
I've searched in the forum but can't seem to find any other reference to this problem. If anyone knows a solution (or any discussion of it) please let me know. Basic device info below:
SPV m3100 (HTC TyTN) running WM6
Windows Vista Home Basic
Windows Mobile Device Center
Thanks.

[SOLVED] HTC Tilt + Dutty WM6.1 + BBConnect = PIN: Pending

Hey guys, i've seen a number of different threads which "kind of" talk about this issue. I'm hoping to make this the definitive one. I'm on hour 10 of working to try to get this running..
(My apologies in advance if there is already one out there that i haven't found. i have been really looking and i think i tried it all... im sure thats what everyone says )
Hardware: HTC 8925 a.k.a At&t Tilt a.k.a TyTN II
Software: Duttys Official WM6.1 Release
Radio: 1.64.06.04
Provider: At&t (US)
Problem: BlackBerry Connect's "Identity" Tab reads "PIN: Pending"
I should also mention that i called At&t to confirm (prior to all of this) that i have a BBConnect service plan, it is active, and there is nothing on their end that would indicate a failure of any sorts.
Attempted Fixes (These have ALL failed):
I've tried every combination of having active sync enabled and disabled during bbconnect install.
I hard reseted before every install. Soft reseted after issue still occurred even after bbconnect install rebooted.
All tests were performed with the the HKLM\System\Versions Aku set to .0.4.2 as per Dutty's wiki: (http://wiki.xda-developers.com/index.php?pagename=DuttySeriesKaiser)
I also tried various combinations such as .0.2.0 and .0.3.6 and .0.3.0
Even tired changing Device ID to HTC_P3450
Tried all of the following BBConnect software downloads:
4.0.0.84:
http://sems.org/content/download/bbc4/o2-terra-bbconnect_wm6_professional_bb_4.0.0.84.cab
4.0.0.90:
http://sems.org/content/download/bbc4/bbconnect_wm6_pro_4.0.0.90.cab
4.0.0.91:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb_4.0.0.91.cab
4.0.0.92:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb.4.0.0.92.cab
Tried installing this one both by copying cab file over to local device and through device web browser:
4.0.0.97:
http://www.america.htc.com/mobile/connect/8925/
I'm installing from and installing to the local device memory, not the storage card..
i think i covered it all... oh, i didnt try the one HEX edit solution, because i didnt think its applicable to dutty's rom..
can ANYONE please help?!
---------------UPDATE--------------------
Okok...so problem solved... i thought i read something similar to this solution somewhere.. but..well whatever... frustrations are over (the problem always seems to find a way to fix itself after you post help for it! )
Process:
1. Hard Reset (set up initial settings, connect to provider, its a total of two reboots iirc)
2. Change registry setting (HKLM\System\Versions Aku set to .0.4.2)
3. Soft Reset
4. Change Device ID to any value (Settings->System->About->Device ID)
5. Soft Reset
6. Install BBConnect 4.0.0.97 via device browser from http://www.america.htc.com/mobile/connect/8925/
7. Installation reboots system
8. Disable 3G connection, force to use EDGE via wireless connection manager
9. Device receives PIN, activates, etc..
10. Enable 3G connection
Notes:
1. So i dont know if items 2,3,4, and 5 were really required.. after preliminary testing, everything works fine with the 3g connection turned on after initial registration.
2. I noticed that the BBConnect Today icon kept showing an exclamation mark indicating its outgoing connection was being blocked. Also the status window kept showing that the connection was suspended by the user, when i never did anything.. so i tired disabling the 3G and sure enough.. problem solved..
Hope this saves someone out there the headache i've been going through.. oh well.. back to the girlfriend who i've been ignoring for the last 10 hours... (hopefully im not in that much trouble )

wooooooooooooooooooot, thx for the solution.

Man...thanks a lot for all the help...it worked like a charm...and i am using it here in dubai...uae where the black berry doestn support the kaiser offically
cheers bro

Great work man, great work for users who uses BBConect

3G still working?
Quick question for those who tried the (disabled 3G to Edge) and then re-enabled 3g.
Does your 3g still work? Have your tried to place calls in 3G mode? I am on my third Tilt, the prior two times I lost 3g after installing blackberry connect, and I want to see if anyone else has this problem, before a try a third time.
Note: On my previous two phones all worked well when I downgraded to GPRS (Edge) as described, but I never got back 3g (even after flashing and removing BBConnect)

elec.two said:
Hope this saves someone out there the headache i've been going through.. oh well.. back to the girlfriend who i've been ignoring for the last 10 hours... (hopefully im not in that much trouble )
Click to expand...
Click to collapse
I added this post to Dutt's WIKI and gave you due credit for your hard work.

Now if only someone can figure out how to force WM to do multiple APNs and BBConnect would be perfect!

Strange... All I had to do with my Tilt was set the AKU to .0.4.2 or .0.4.4 in the registry before installing the BB Connect software.
I've used the .92 & .97 installers from CAB files on my SD card just fine.
If you change the AKU version after the BB software is installed, it won't work right, as it will still drop the connection. You'll have to reinstall the software.
http://forum.xda-developers.com/showpost.php?p=1903958&postcount=5

Quick Question
So to those of you who have BB Connect running, is all well with your 3G? Thanks for your help, I want to hear a few success stories before a walk down this path again

so I followed the steps, and got everything installed and turned off. I'm trying to get an unlocked tilt on my blackberry account on t-mobile.
The problem is its installed, but the email options are greyed out. We don't use an exchange server (or if we do it is configured very wrong) as I have pop3 information on my t-mobile blackberry page. It says I register successfully on the network, but I still don't receive emails. What do I need to chnage?
edit: fixed - I had to get back online and say yes that I had a new pin.
THANKS!!

lcohen999 said:
Now if only someone can figure out how to force WM to do multiple APNs and BBConnect would be perfect!
Click to expand...
Click to collapse
that is the same problem I have left now, almost like hardware related.
does AT&T default one can do multiple APNs? as it is officaly support BBC.

I installed Blackberry Connect and I am using it with a Blackberry Enterprise Server.
But I see in order to have the BB icon, the GPRS is always attached. Should it work like this ? I know/knew that with Blackberry phones it attaches to GPRS only when incoming email is coming, and only with Microsoft Directpush technology it stays attached all the time.
If it works like this ( Always On ), is there a difference between BB Connect for WM, and Outlook with Microsoft Direct Push ?
Yours,
Alex

elec.two said:
4.0.0.97:
http://www.america.htc.com/mobile/connect/8925/
Click to expand...
Click to collapse
This link doesn't seem to work, it's actually supposed to be:
http://www.america.htc.com/mobile/connect/8925/index.html
The problem is, when you click "install now" it still can't find the cab. The 4.0.0.97 cab is now mirrored here:
http://sems.org/content/download/bbc4/bbconnect_wm6_professional_bb_al_4.0.0.97.cab

desktop manager software
Do you have a link for desktop manager?
I have the version 4.x.17 and cannot connect with the bb on the pda.
I don't know which is the latest or most compatible version for desktop mgr having in consideration what you have in the pda. please, give me some light...

Thanks from a Touch DUAL user....
Thanks Elec.Two
Just added this to the Touch Dual Forum (Nike) as it works a dream for us too!
http://forum.xda-developers.com/showthread.php?t=390284

Has anybody an idea how this will work on a Pharos / HTC P3470? I just tried it described in this taks, but without success.

I had 2 dots and an x
I updated to Dutty's ROM today, and had problems with BBC.
So I searched, found this page and did exacty as told. No luck. Tried again. No luck.
So I went to Start/Settings/Connections/Connections and then clicked on 'Manage existing connections' and changed the settings (default on Dutty's ROM). [To do that click 'Edit' and change the 'Access point name' from isp.cingular to wap.cingular. Click next and change the 'User name' from ISP.CINGULARGPRS.COM to WAP.CINGULARGPRS.COM]
This worked for me. This info is for noobs, of which I am one!

I have just updated my TyTN II to WM6.1 and bbconnect (version 4.0.97) stopped working. Basically it had PIN marked as pending and was reporting no connection.
I have executed only step 2 (change hklm) and 3 (soft reset) from elec.two procedure and it resolved my issue - bbconnect works now. I have not reinstalled the bbconnect.

So I went to Start/Settings/Connections/Connections and then clicked on 'Manage existing connections' and changed the settings (default on Dutty's ROM). [To do that click 'Edit' and change the 'Access point name' from isp.cingular to wap.cingular. Click next and change the 'User name' from ISP.CINGULARGPRS.COM to WAP.CINGULARGPRS.COM
Click to expand...
Click to collapse
Well, I have to thank you on this! I could not get BB Connect to work for the life of me, and your fix finally go t it working!!!
Thanks!

.... and now for the Diamond - same old problem....
Have tried all the known fixes - I think - anyone had any success with bbconnect on the new diamond? Sigh.....

I-mate 9502: MMS&GPRS not working, Can't send SMS (Some Service Provider)

Dear All Guru....
I currently purchase Imate 9502, everything runs well until I found out that it's can't send MMS ???And Can't use 3G, or even GPRS???But can send SMS.
So i try to change the SIM card to other Service Provider, it become even worse, All MMS,GPRS,3G and SMS. all Fall to the earth all seems not to be fuction well....
I wonder any1 having this problems????
The phone is GREAT but this issues seem to bother me more and more
Thank you for helping.

Is it i have to get another Phone??? hauhua.... which i hate to do it ^^
Nobody purchase this phone/?? or only me having the problems??

hi, first of all, I would like to ask you to : please....flash the ROM using the latest WM6.1 official ROM from the imate website...I think that WILL FIX ur problem...I use imate9502, and this device is really ultimate for me

Yes the unit is working fine and good, just the problem is the Messaging and internet feature.
I do flash to 6.1 version 1.73 and curretly use 1.77 (official) still same result. i don't know what is the problem even imate personell also haven't gv me any new since 2 months ago
I go to registry but still can't find any hint
The setting for the MMS,GPRS, all already correct ( using manual and imate configurator ) no hope also.

h9s said:
Yes the unit is working fine and good, just the problem is the Messaging and internet feature.
I do flash to 6.1 version 1.73 and curretly use 1.77 (official) still same result. i don't know what is the problem even imate personell also haven't gv me any new since 2 months ago
I go to registry but still can't find any hint
The setting for the MMS,GPRS, all already correct ( using manual and imate configurator ) no hope also.
Click to expand...
Click to collapse
Hi h9s,
I've found your post googling for something else. I suppose you have already solved your problem with internet connection by now. Please, disregard this post in this case. Anyway, I wonder if you have already changed the GPRS authentication method. Go to Start > Settings > Connection tab > GPRS Authentication. Its defaulted to CHAP. Change it to PAP instead and give it a try.
Just my 2 cents...
Cheers!
Carlos

SOLVE!!!
Stupid Old SIM Card Was The Issues
After 10x Hard Reset, Finally Found Out My Mistake.
^^
Now, I'm Happy

Cannot update imate configurator
Hi I cannot connect through my GPRS, seems like something wrong with the connection setting. Currently I'm using Satelindo (Indonesia), and I tried to download the imate configurator file from https://www.imate.com/Support_OperatorSettings.aspx but when I try to install it always says The previous version must uninstalled before, and when I click yes, it always failed to uninstall the previous version & the instalation unsuccesfull. Anyone could help me? Thanks in advance

spizaetus said:
Hi I cannot connect through my GPRS, seems like something wrong with the connection setting. Currently I'm using Satelindo (Indonesia), and I tried to download the imate configurator file from https://www.imate.com/Support_OperatorSettings.aspx but when I try to install it always says The previous version must uninstalled before, and when I click yes, it always failed to uninstall the previous version & the instalation unsuccesfull. Anyone could help me? Thanks in advance
Click to expand...
Click to collapse
You see, I find i-mate's Configurator to be pretty useless in detecting my carrier's data here in Brazil, for what I removed its .lnk item from my \Windows\StartUp a long time ago, and I manually provided my carrier's data (GPRS, MMS). Please, consider doing the same.
Just my 2 cents...
Cheers!
Carlos

Internet calling and GPS

Hi,
A few months ago, I installed WM6VOIP.CAB which downloaded here. Once installed and configured, GPS stopped working. I had to re-flash the phone and then get back GPS. Does anyone know this issue has been fixed or not?
Thanks in advance

There is a cab file out there that doesn't have this problem:
InternetCalling_21109.cab
http://forum.xda-developers.com/showthread.php?t=446652&page=105
I've tried a lot of the WMVOIP6 installs and this seems to be the only one that acutally works AND doesn't break the GPS in the process....

Do you have any idea why can it conflict with GPS? I downloaded this cab but installation is not sucessful. I guess the file RTCDLL.DLL is using by system and cannot be overwritten. How to unlock this file?

I forget the resaon for the conflict.
Shoot me an email at victor dot anderson at gmail dot com and I'll email ya .cab I'm using for the install - which works fine on my HTC Fuze....

Thank you, finally, I managed to install this cab. The file "RTCDLL.DLL" existed already and that is why the installation fails. I rename this file and then install the cab successfully. Then I setup the SIP settings(I use voipRaider). VoipRaider is appearred on Today screen, and the status changed to "Selected" when I turned WiFi on. Everything looks fine but how to make a internet call? I don't see any option to select internet call from phone contact list. Do you have any idea?
GPS is still working after I installed voip.

HTC_FUZE said:
Thank you, finally, I managed to install this cab. The file "RTCDLL.DLL" existed already and that is why the installation fails. I rename this file and then install the cab successfully. Then I setup the SIP settings(I use voipRaider). VoipRaider is appearred on Today screen, and the status changed to "Selected" when I turned WiFi on. Everything looks fine but how to make a internet call? I don't see any option to select internet call from phone contact list. Do you have any idea?
GPS is still working after I installed voip.
Click to expand...
Click to collapse
Once you're today screen is showing "selected" - then you're good to go - it uses the built-in dailer so just dial as normal either from the dialer or contact list....
Are you on ATT? One of the things that bothers me about ATT is that you can't use VoIP over 3G - but with the other carriers I think you can do this - there is a registry entry you have to change....

Yes, I am on AT&T. I did not make a call over 3G, but I can see "Selected" appears in 3G mode as well. Does this mean I can make internet call over 3G?

Maybe it's me but I can't find the link to the cab in that link you posted.

I can attach for you. here you are:

HTC_FUZE said:
Yes, I am on AT&T. I did not make a call over 3G, but I can see "Selected" appears in 3G mode as well. Does this mean I can make internet call over 3G?
Click to expand...
Click to collapse
sorry it took me so long to get back to ya...fogot about this thread and I wasn't subscribed to it ....
Anyway - if you see 'selected' while in 3G - then yes, you should be able to make voip calls over 3G.
have you updated your ROM or flashed your phone? If you have, which ROM are you using that got this to work?
And which version of the radio do you have?
Thanks!

Hi, Tech
I am using the lastest official AT&T ROM which you can download from HTC web site. I think it was released at the end of May.

One problem to use internet calling is that the voice comes out from speaker. Do you have same problem?

HTC_FUZE said:
One problem to use internet calling is that the voice comes out from speaker. Do you have same problem?
Click to expand...
Click to collapse
Yeah we all have that problem. If you're not going to use a bluetooth headset or a wired headset - there is something called audioroute that can help ya out...
http://www.softwarearea.info/audioroute-v12020.htm

I had some problems with navigating when the phone rings...
After I picked op the phone during navigating I can make a phonecall and
the navigation screen comes back...like it added this...
So that I can keep on navigating during the call.
The problem was that the most times the lost of the comport off the GPS(C4)
After hanging up the call the GPS connection lost his connection most of the times.
After installing this cab (InternetCalling_21109 work with GPS.cab)
The GPS keeps on running during and after dialing...lol...
Deleted the internet calling from the todays screen(I dont use this)
But I think it was not ment to get this function but for me it works!
Maybe someone else can use it 2...lol...
On a HTC Touch Pro T7272 original rom 5.05.404.1NLD