Hello,
sorry for my bad english
I have a problem with the Qtek S200, it bags every day. I recently installed romProphetManila2D again, I tried after that, with hard reset, but still buging. Do i re-install the same ROM, or what to do? I have Windows 6.1, G4 model.
Thank you
Did you do a HardSPL before flashing the rom
If you have not already done so have a deep read of the Prophet Wiki page as this will give you a lot of usefull info with regards to flashing
Related
Hi to all,
i have try to format S200 Qtek and now when i power on, i always have poot loader screen...
please what is wrong?
must i flash for solve pb?
if yes link with good french rom will be appreciate
thanks in advance for help
regards
First, you have provided absolutely no useful information:
What was on your device before you attempted to flash the Rom?
What Rom did you attempt to flash?
What info is displayed on the Bootloader screen?
If you can't answer these simple questions then you have not studied enough to even think of flash your Rom.
yes your right i have not say anythink in this post... sorry
ok so first i want to say i have solve my pb by flashing my ROm with
RUU_Prophet_215738_2157127_023021_QTEK_FRE_Ship.exe
first it was 2.9 rom version.
then the pb is come when i try to reset device with jafwm.
(service / reset device)
thanks for your reply
regards
Hi people! First I want to thank all of you that make a great job on helping and cooking all of these apS for our prophets.
I've looked in the others post for my problem and tried out all of methods explained but nothing helped me.
My problem consist on the boot of my S200. After i made an upgrade to WM6 it stays blocked on the first boot ( QTEK Image ) and stays there until battery goes down. I tried tu upgrade others ROM's by tho BOOTLOADER way but it doesnt work. So I'm completly bypassed by this problem.
If anyone have a solution please post it.
Regards
which roms? ipl spl versions,device model?
Qtek S200 (alias Orange SPV m600)
ipl 2.10.0001
spl 2.20.0001
I first upgrade to WM6 cooked by GULUM, i found it here.
When i wanted to upgrade another version but it doesnt function, until i found Crystal v4.
And now my machine wan't boot, it stays on Qtek screen.
I have the same problem...
Fict it, just installed an older ROM and my htc works again. Gonna try to install a newer ROM now.
TmKing, can you explain your method and the you ROM you used ?
Thank You
I installed this one: Fantastic b4 step1 (got this from this forum)
Now I have WM5 back, I tried to install another ROM, but didn't work. BUt it's too late to do it now, so I 'l try again tomorrow.
Greetz
This also works
TmKing said:
I installed this one: Fantastic b4 step1 (got this from this forum)
Now I have WM5 back, I tried to install another ROM, but didn't work. BUt it's too late to do it now, so I 'l try again tomorrow.
Greetz
Click to expand...
Click to collapse
Have a look to the post 1 in my signature link~~~~~
Enjoy!!!!
Hehe, yes, indeed, I wanted to do everything verry fast. I wasn't aware of the new method to upgrade my HTC.
If you follow the appropriate steps, you will not have this boot problem.
Hi,
Firstly my english is very poor. Excuse me.
I have installed the original rom 6.1 of the website of HTC in spanish the last week.
I've lot of problem with any progam: cprog.exe
It 's appear a message in the screen that cprog.exe have an error.
And the phone is freeze for long time.
I see in this forum that it's possible change the SPL.
The SPL of the original ROM 6.1 is 3.29.
I need to change the SPL???
I'm confuse.
Thank for your help.
used sspl for change the SPL,or used the 3.28 pathed HSPL.
Ok
Thank you for your ansmer.
But the SSPL 3.28 is not oldest than the origial rom: sspl 3.29???
I don't no
If you read the post you would see they are the exact same internally so it will work just fine for you.
Tell me what's the version of SPL on your Kaiser now?
If the cprog.exe error causes freezes, just reflash the ROM, changing SPL won't help you out of sh!t.
The Version of SPL is 3.29.
I have reflashed the rom 5 or 6 time, and the sames problems.
cannot update my htc p3400
can u help me to update my gene. i have try my best but after the screen goes white it shows no moblie connection & mobile hangs.
I had the same freezing issue on my Kaiser - Official Norwegian 6.1 ROM. I was so fed up with this, so I flashed Leo's V6 ROM with SPL 3.29.
Now I'm a very happy man
Highly recomended ROM / SPL
The Doc.
mans said:
Hi,
Firstly my english is very poor. Excuse me.
I have installed the original rom 6.1 of the website of HTC in spanish the last week.
I've lot of problem with any progam: cprog.exe
It 's appear a message in the screen that cprog.exe have an error.
And the phone is freeze for long time.
I see in this forum that it's possible change the SPL.
The SPL of the original ROM 6.1 is 3.29.
I need to change the SPL???
I'm confuse.
Thank for your help.
Click to expand...
Click to collapse
mans said:
Hi,
Firstly my english is very poor. Excuse me.
I have installed the original rom 6.1 of the website of HTC in spanish the last week.
I've lot of problem with any progam: cprog.exe
It 's appear a message in the screen that cprog.exe have an error.
And the phone is freeze for long time.
I see in this forum that it's possible change the SPL.
The SPL of the original ROM 6.1 is 3.29.
I need to change the SPL???
I'm confuse.
Thank for your help.
Click to expand...
Click to collapse
I have been running HTC WM 6.1 Spanish, with HardSPL 3.29 and radio 1.58.25.17 for a while.
Does that error appear before loading any software on the phone?
Does it appear when doing something in particular?
I only found an application giving error and it was GSplayer when accessing MIDI plug-in options.
Hi!
To upgrade my i-mate JAMin from WM5 to WM6.5 I spent several hours to find out how to do.
This forum is very confusing for me.
I was not able to find out what should be done (step by step).
I know, I'm not an expert. I just want to upgrade my phone and use it again - hopefully without troubles.
Can anybody give me a hint in a clear and brief way?
Thank you in advance.
read carefully
i can give you my own guidelines but these guys made better ones already.. just need to read carefully
http://forum.xda-developers.com/showthread.php?t=350033
*skip the procedure 3 and 4 if your ROM has nk.nbf filename already
heres another one if you you need to recover your old device just in case you fail upgrading...
http://forum.xda-developers.com/showthread.php?t=310452
http://forum.xda-developers.com/showthread.php?t=353547
got errors before starting to flash? read the attached file...
thanks to owners of these posts!
hi marekPLPH, thank you for your information. I finished the upgrade successfully few minutes ago. Unfortunately there seams to be some problems (performance, refreshing the display etc).
I'll have a look within this user-platform here to find out how to downgrade from WM6.1 to WM5.
did you hard rest your device? com+cam button+soft reset button?
help to resurrect my axim x50mid
Hello folks, that's fine with you, then ....
Today I upgrade my axim x50 mid, was trying to update to wm5, but does not succeed in the process, I found a rom DiMa_K_A01_X50_WM5_EN.nb0, and changed her name to DiMa_B_A01_X50_WM5_EN.nb0 crc also like ...
The same finished the installation process and asked a hardreset, did the hard and then it was only with the black screen ... I tried every way to revive my toy .... but without success, then come to you asking for help resurrects him.
sorry my english bad.