okay i tried updating to cyanogenmod from Magic GYD, anyways i must have done something wrong cause it sits at the Rogers logo and wont go anywhere..... can anyone help me? i cant get into fastboot nothing not sure what to do.
can anyone help at all?
no one will come for help
do search there r somany ppl bricking there phone some get it back some are still there
read
read
read
http://forum.xda-developers.com/showthread.php?t=571457&highlight=unbrick
one of them is here
next time please do search b4 u go to new post
dreckis604 said:
okay i tried updating to cyanogenmod from Magic GYD, anyways i must have done something wrong cause it sits at the Rogers logo and wont go anywhere..... can anyone help me? i cant get into fastboot nothing not sure what to do.
Click to expand...
Click to collapse
I had the same issue, it was stuck forever in the vodafone logo, and fastboot mode or recovery modes didn't work at all, no matter what combination of buttons, after an incomplete SPL update.
"The only thing slightly different was keeping the trackball pushed when pressing the power button, lighted up the led light in blue, and nothing else, no logo or any other activity.
I thought it was completely bricked, but no. Here's what i did
With the phone off, connected the USB cable, then powered it up. While it was still frozen on the logo screen, i could actually issue fastboot commands, so I was able to send a fastboot boot recovery.img and flash again the SPL, and a new ROM. No problem after that." EHRepli
Try what he said on a different post and see if that works. If not then you're screwed.
which recovery image should i flash????
C:\android-sdk-windows\tools>fastboot boot recovery.img
< waiting for device >
it's just sitting there,,, i have the same bahaviour i press the trackball with power i get blue LED, i turned it off, plugged it in via USB then turned it on. Should i be trying to get it into fastboot mode? or just normally turn it on?
There are a few thread on how to recover from that. Some can recover, some can not. It all depends on what was done initially and which radio image was installed and the OS image etc.
I recently flashed a ion (32B) radio on the Roger's magic and was completely stuck. Sent it in to HTC and they fixed mine for US$20.00 and 10 day of waiting. If your phone is still under warranty, do that. Worst case, if you are in Canada, see if a Rogers store can replace it for you.
i really dont know what i did wrong...
dreckis604 said:
C:\android-sdk-windows\tools>fastboot boot recovery.img
< waiting for device >
it's just sitting there,,, i have the same bahaviour i press the trackball with power i get blue LED, i turned it off, plugged it in via USB then turned it on. Should i be trying to get it into fastboot mode? or just normally turn it on?
Click to expand...
Click to collapse
Same here, I have tried every key sequence known to man and still no luck. I tailed the output of messages (under linux) watching for a glimmer on the usb port when connecting/powering on/removing/replacing battery etc etc but there is nothing.
Without it there is no way for me to fastboot a recovery. I'm afraid I have a $500 brick unless someone has a radical idea...:-(
i just brought it back and got a new one...
It happen the same to me in my Rogers HTC magic, just wipe again and reflash thats how I solved it
Make sure you flash the cm-rom and then flash the ebi1/32A port file.
shankara said:
It happen the same to me in my Rogers HTC magic, just wipe again and reflash thats how I solved it
Click to expand...
Click to collapse
what do you mean wipe again? if u cant get it into fastboot mode???
bcrook said:
Make sure you flash the cm-rom and then flash the ebi1/32A port file.
Click to expand...
Click to collapse
So what did i do wrong? i followed cynomod step by step and it screwed my phone up....
dreckis604 said:
So what did i do wrong? i followed cynomod step by step and it screwed my phone up....
Click to expand...
Click to collapse
Did you follow these steps?
bcrook said:
Did you follow these steps?
Click to expand...
Click to collapse
yes,,, is there anything special we need to do for rogers?
i just used the one click root method with a perfect spl on my rogers magic and ive been cool like a watermelon
Related
I installed 1.6 radio update from htc developers and my phone (32A) doesnt start. It stocks in htc logo. I can't go into fastboot mode, buttons do nothing. Anybody who nows what to do
Hey, wht spl did u have ?
i think i had 2005. i tried to intall radio 2.22.19.26l and when I restarted the phone do nothing. Stocks everytime on magic logo an can't get in fastboot while i was pressing Volume down+Off / Home+Off or Back+Off button. I know how to go into fastboot because I have intalled several roms via recovery.img
What can I do now?
konstantinosmis said:
i think i had 2005. i tried to intall radio 2.22.19.26l and when I restarted the phone do nothing. Stocks everytime on magic logo an can't get in fastboot while i was pressing Volume down+Off / Home+Off or Back+Off button. I know how to go into fastboot because I have intalled several roms via recovery.img
What can I do now?
Click to expand...
Click to collapse
did you root it???
also can you get into fastboot or recovery?
fastbook it back+end
reovery is home+end
totally misread your post....
can you adb shell it??
I'll try again again with recovery.
konstantinosmis said:
I'll try again again with recovery.
Click to expand...
Click to collapse
ok if you can get into the adb shell just start from scratch basically
follow this to get a dirty way to start from scratch...
PLEASE EDIT THE INSTRUCTIONS TO A 32A VERSION!!!
i think that is why the radio is pwned.... i believe the ion is a 32B "device"
good luck
do nothing, no working buttons and no adb shelling (no any connection with pc)
try to pull the battery with the device powered on..
then hold home as you put the battery back in.
theomajigga said:
PLEASE EDIT THE INSTRUCTIONS TO A 32A VERSION!!!
Click to expand...
Click to collapse
What?
Before you even try to flash your device, first try to find out the diff between a and b devices, htc and google branded devices.
If you dowwnload ION official rom and flash, you shuld at least know what device it is made for, dont expect htc to tell you..
And dont blame forums for own stupidity.
bunny0007 said:
What?
Before you even try to flash your device, first try to find out the diff between a and b devices an htc branded and google branded devices.
If you dowwnload ION official rom and flash, you shuld at least know what device it is made for, dont expect htc to tell you..
And dont blame forums for own stupidity.
Click to expand...
Click to collapse
I was saying that so that since he already tried to install a 32B radio, that if he were to get it up again, to install the right radio.
same problem here, bricked.
I am a newbie here, was using Cyanogen mod and myHero 1.1.2 without any problems (32A)
Wanted to try JAC's mod, hence updated my radio/spl.
Radio update went fine without errors, upon reboot it just hangs there at HTC MAGIC logo.
Bringing it to the carrier now for a swap, hopefully.
the only thing that phones do is that while i'm pressing joystick + off blue led turn on.just i do't know what it is and what this can do
@evilfry
have you tried the multiple ways to boot or adb it?
yes all the ways. adb wants the phone connected with pc, pc doesnot find phone when it isn't turn on or in fastboot. the only screen that apears on the phone is htc magic logo. nothing else.
konstantinosmis said:
the only thing that phones do is that while i'm pressing joystick + off blue led turn on.just i do't know what it is and what this can do
Click to expand...
Click to collapse
when you plug it in to the computer, does it say unrecconized device?
i have no device connected while the htc screen apears. i used to have when i done updates before. windows when connecting a device I hear a sound.
its out of my relm, sorry man was hoping i could help.
-T
konstantinosmis said:
i have no device connected while the htc screen apears. i used to have when i done updates before. windows when connecting a device I hear a sound.
Click to expand...
Click to collapse
Your device is bricked bro!!. Say its obituary. Never upgrade radio as it will not talk to SPL.
I'm sorry to report that you almost certainly have bricked the phone. I flashed a hero radio by mistake and the phone went back to htc for repair. They had to replace the main board.
man i had the same issue i took out the sim card and boot the phone in fastboot mode then did the recovery and now its back........ dont know if you wanna try that
So I just got my phone today, rooted and installed the Viper rom. Then I installed the blackout kernel. It installed fine but it wont start up anymore. The phone won't go to bootloader or anything. I tried the 10 second power +volume down, ill get the screen that says htc one s this is a development phone and thats it. it turns off after that. When i plug the phone into a charger the light doesnt come up, i tried to use fastboot from my computer but it can't find the device since its not in fastboot. what should i do?!
This is odd. Even when you try turning the phone on with the volume down button depressed you can't get into bootloader? I've always been able to get to bootloader so this one is a challenge. I would make sure you have enough battery life in your phone too. Even if you have kernel issues you should still be able to make it back to bootloader. It should pop up instantly without any other boot screens. I imagine you can't see your phone from your computer with either adb devices or fast boot devices?
Sent from my HTC One S using xda premium
Are you sure you flashed the right kernel? I know quite a few Blackout kernels.
You did flash the boot.img, right? You can try flashing it again. If nothing works, try an RUU, or let the battery drain.
Are you sure you're trying to go into the bootloader the right way? The trick for me was to hold down only the power button, then once it goes off, hold down the volume down and the power button.
I remember the time another person had a similar issue, and managed to get in after about 30 tries.
Sent from my HTC One S using Tapatalk 2
usaff22 said:
Are you sure you flashed the right kernel? I know quite a few Blackout kernels.
You did flash the boot.img, right? You can try flashing it again. If nothing works, try an RUU, or let the battery drain.
Are you sure you're trying to go into the bootloader the right way? The trick for me was to hold down only the power button, then once it goes off, hold down the volume down and the power button.
I remember the time another person had a similar issue, and managed to get in after about 30 tries.
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
thank you! that worked, i didnt flash the boot.img.. i forgot that part lol im used to having s-off where its so much simpler, but luckily i had a backup i could use. i know this is a dumb question but how do i install the kernel with boot.img?
deepshah420 said:
thank you! that worked, i didnt flash the boot.img.. i forgot that part lol im used to having s-off where its so much simpler, but luckily i had a backup i could use. i know this is a dumb question but how do i install the kernel with boot.img?
Click to expand...
Click to collapse
Go into fastboot in the bootloader. Then type fastboot flash boot boot.img in your Windows command prompt.
You should be able to extract the boot.img from the relevant zip file of your custom kernel. Then put that file (assuming its named boot.img) in the same folder as fastboot.exe
First of all, sorry for the bad english
i have bricked my at& inspire 4g putting a bad hboot img i was just trying to root my inspire 4g with htc quick root
and i have putted a recovery.img on hboot .img and my phone is permenetly unusable i also know cid of my phone
and i have created gold card please help :'(
What image?
bananagranola said:
What image?
Click to expand...
Click to collapse
sir i think i have overwritten the misc or hboot with recovery image
Branded badmash said:
sir i think i have overwritten the misc or hboot with recovery image
Click to expand...
Click to collapse
If you want help, you're going to need to be more specific. Exactly what steps have you taken? Exactly what commands have you used? Exactly what files have you used? Exactly what did you do with them?
bananagranola said:
If you want help, you're going to need to be more specific. Exactly what steps have you taken? Exactly what commands have you used? Exactly what files have you used? Exactly what did you do with them?
Click to expand...
Click to collapse
sir actually i used htc quickroot 1.1.13 releses and when i clicked on the start button the software
requested me for a hboot.img unfortunatly i have putted a recovery .img and my phone turns of and only softkey light was on
when i unpluged it and it was bricked now whenever i try to turn on my phone there is no response vol down + pwr don,t work only vol up +pwr button works and phone vibrate three times and the red light is blinking in this mode computer detect a comm port qualcomm diagnostic hs-usb 900e . no recovery no fastboot no adb.
thanks in advance
bananagranola said:
If you want help, you're going to need to be more specific. Exactly what steps have you taken? Exactly what commands have you used? Exactly what files have you used? Exactly what did you do with them?
Click to expand...
Click to collapse
i putted a clockworkmod recovery image instead of hboot.img
Unfortunately, if you can't access recovery, fastboot, or ADB, you have very little chance of fixing it.
bananagranola said:
Unfortunately, if you can't access recovery, fastboot, or ADB, you have very little chance of fixing it.
Click to expand...
Click to collapse
but i have qualcomm diag access is this possible to flash misc or firmware via wualcomm diagnostic
Is there any to flash the correct hboot and misc in download mode
Please Help
Yes but htc and or Qualcomm has to do it. I've hard bricked my Inspire with nothing but a glowing black screen and ran the ruu setup and got it back working.
< Coming to you live from the planet One X >
enigma2446 said:
Yes but htc and or Qualcomm has to do it. I've hard bricked my Inspire with nothing but a glowing black screen and ran the ruu setup and got it back working.
< Coming to you live from the planet One X >
Click to expand...
Click to collapse
I have also tried the ruu but no luck nothing happens ruu didnt detect the phone no luck.
i have the same problem. i called htc today, gonna send mine back. gonna cost atleast 80 to fix. maybe more.
Hello everyone
im in a little big dilema here.
i was on cm11 and i wanted to go back to stock,
so i tried to flash Retail brasil and the process failed at around the second step,
i believe it said something about tz signed.
i left my device there, then after the phone shut down i could no longer turn it on.
i tried the vol- and power and i got nothing, also the vol+ vol- and power and also nothing.
i cannot make my phone respond.
also battery was at around 80% so it does have battery.
im afraid i might of bricked it trying to go back to stock. xD
kind of funny.
has this happened top anyone?
help would be appreciated a ton.
hugodefcon said:
Hello everyone
im in a little big dilema here.
i was on cm11 and i wanted to go back to stock,
so i tried to flash Retail brasil and the process failed at around the second step,
i believe it said something about tz signed.
i left my device there, then after the phone shut down i could no longer turn it on.
i tried the vol- and power and i got nothing, also the vol+ vol- and power and also nothing.
i cannot make my phone respond.
also battery was at around 80% so it does have battery.
im afraid i might of bricked it trying to go back to stock. xD
kind of funny.
has this happened top anyone?
help would be appreciated a ton.
Click to expand...
Click to collapse
you are not bricked some partitions are not able to be downgraded such as tz just erase those lines from the xml file remove tz and gpt
billycar11 said:
you are not bricked some partitions are not able to be downgraded such as tz just erase those lines from the xml file remove tz and gpt
Click to expand...
Click to collapse
like i said i am not able to make the phone respond.
none of the button combinations do anything.
for i am not able to get to the bootloader or even see the booanimation or anything.
its weird how i got this happen to me when i was trying to go back to stock.
funny if you think of it.
hugodefcon said:
like i said i am not able to make the phone respond.
none of the button combinations do anything.
for i am not able to get to the bootloader or even see the booanimation or anything.
its weird how i got this happen to me when i was trying to go back to stock.
funny if you think of it.
Click to expand...
Click to collapse
when you plug it in does it just stay at a green led?
billycar11 said:
when you plug it in does it just stay at a green led?
Click to expand...
Click to collapse
there is no light.
:c
hugodefcon said:
there is no light.
:c
Click to expand...
Click to collapse
im sorry to hear that i think you may be bricked ,but don't lose hope maybe someone that knows more about these phones than me can help
Some questions that may help people help you if you can answer them:
Did you use an fxz with RSD Lite when you were trying to go back to stock? If so, where did you get it? If not, what procedure did you use? Which version of Android was it? 4.1.2?
Although to be honest, if you can't even get to fastboot, your chances aren't good. I've been in similar situations before and I was able to fix it because I could at least get into fastboot and start from scratch. You are sure power + volume buttons together isn't working?
killrhythm09 said:
Some questions that may help people help you if you can answer them:
Did you use an fxz with RSD Lite when you were trying to go back to stock? If so, where did you get it? If not, what procedure did you use? Which version of Android was it? 4.1.2?
Although to be honest, if you can't even get to fastboot, your chances aren't good. I've been in similar situations before and I was able to fix it because I could at least get into fastboot and start from scratch. You are sure power + volume buttons together isn't working?
Click to expand...
Click to collapse
i was using rsd lite
i was on cm11 and wanted to go to stock retail brasil. which is 4.1.2
i cannot reach fastboot or anything.
i sent it to my carrier, i am not under warranty since i got this phone on launch but they said they will see it they can do anything but wont replace it,
if its a no go i will take it to a cell shop where i think they know a little bit more of this type of situation, bricking flashing and stuff
hugodefcon said:
there is no light.
:c
Click to expand...
Click to collapse
for some reason my phone no shows a green led when connected to the computer and to the wall charger but only for a little while then it starts blinking.
but is there some option i could try?
Any help appreciated. I accidentally put the pixel elemental x kernal on my pixel xl and no I am stuck at the google screen with an unlocked bootloader. Can these batteries get pulled at all? Im just stuck here, and very nervous.
Solved
having the same problem, im interested in how you solved it
dablitzkrieg said:
Solved
Click to expand...
Click to collapse
hiw did you fix this i seem to be in same problem
Did you start in recovery and flash the files manually through usb on a computer?
Sent from my Nexus 7 using XDA-Developers mobile app
chrisinsocalif said:
Did you start in recovery and flash the files manually through usb on a computer?
Click to expand...
Click to collapse
i cant get into recovery i got red corrupt screen i did fastboot continue got it booted back up but had a emergancy and had to run out and forgot to plug back in battery died now i cant seem to get to get it booted back up again just seems to bootloop or get stuck with white screen with the dots when i do the fastboot continue
chrisinsocalif said:
Did you start in recovery and flash the files manually through usb on a computer?
Click to expand...
Click to collapse
thank you so much for your help.somehow i got it back up and running
Had the same happen to me. It didn't want to go into recovery gave a message it failed. With some patience I manged to get the button combo to work for fastboot then did a flash-all of the factory image. I think the trick was it had to be plugged in to get to download mode and I think you may hit the power button slightly before the volume down. It was a bit tedious. I tried to recover the boot.img and that trashed things up worse, got no google loading logo or something odd. Anyhow flashing the full factory image fixed things!
Glad you got it resolved, maybe this helps someone else in the same spot.