Well actualy it works, i think. I manage to get to my Login screen where it asks for password, but it keeps saying username/password wrong. And that cant be cus im loged in with the same password right now.
Doesnt make any sense, what am i doing wrong?
VirtR said:
Well actualy it works, i think. I manage to get to my Login screen where it asks for password, but it keeps saying username/password wrong. And that cant be cus im loged in with the same password right now.
Doesnt make any sense, what am i doing wrong?
Click to expand...
Click to collapse
try to log off pc then logon from phone.
Remote desktop, using Remote Desktop Mobile?
If it hasn't been done already you'll want to activate RDP on your PC (Using Windows 7, PC Control Panel > System > Advanced system settings (on the left) > "Remote control" tab, check "Allow connection from devices using any version of Remote Desktop (less secure)")
If it already has been activated then I'm not sure.
Obviously you need to be on the same network and point it to the correct address, but logging in from a remote desktop automatically logs out from any local session. At least that's what it does here.
Sorry if it didn't help.
best way to try this is be on your WiFi network at home, Put in the Ip address of the PC you want to use then the username and password.
This works on mine ok
so it can only be used in the home network ?
I mean....using a different wi-fi access doesn' t work?
Make sure you have a password set for the user account you are trying to log on with. If you haven't set a password it will give invalid password error.
I have some issues setting this up. I write the following. Please let me know if i type it wrong:
Computer: Name of my computer
User: Username
Password: Password that i use to loggin to my computer
Domain: My home networks IP.
barbapappa_86 said:
I have some issues setting this up. I write the following. Please let me know if i type it wrong:
Computer: Name of my computer
User: Username
Password: Password that i use to loggin to my computer
Domain: My home networks IP.
Click to expand...
Click to collapse
If you can't connect using the computer name, try using the IP address of your computer. Unless the computer you wish to connect to is part of a network domain, you can leave that field blank.
If you're trying to connect via a WAN (Internet) connection then you'll need to have IIS installed on your PC and configured on your router/firewall.
omneity said:
If you can't connect using the computer name, try using the IP address of your computer. Unless the computer you wish to connect to is part of a network domain, you can leave that field blank.
If you're trying to connect via a WAN (Internet) connection then you'll need to have IIS installed on your PC and configured on your router/firewall.
Click to expand...
Click to collapse
thanks! works fine, but the sound is horrific. any way to fix that?
I have enabled RDP on my PC yes, and i dont see the point of doing remote desktop from my wifi network, i can just aswell go ahead and use the computer then.
I have a data flatrate on my phone im going away for a week and i wanted to have access to my pc over the internet.
I typed in my IP adress in the Computer field
My Login Username into User Name field
My Login Password into Password field
Domain i left empty because i dont realy know what am i suposed to write there.
It gets me to my login screen of the PC, where i have to putin my password again for my only PC account. I type it in and it says wrong username/password.
And yeah i have tried loging out on the pc first, still the same thing.
Right click on "My Computer" and select properties. Go to the tab called "Computer Name" and look what it says is the "Full computer name". That is what you need in domain name.
So, you have the external IP address of your PC (don't forget, this will probably change with a router reboot), your username & password, and then the domain name from above.
That should do the trick, but let us know if it doesn't.
Still says username/password wrong. Ive even changed the pasword to something realy simple with no Y or Z because maybe the keyboard might be set to english/german or something. Ive also opened the Port in my router. Im out of ideas. Im not on the new updated rom btw, still the preinstalled one, but i dont think that should matter.
Thanks for your help.
Uhm, let me get this straight: You are trying to use RDC from somewhere outside your own network at home where your computer resides?
Check these things:
1. Make sure that you have opened RDP in your router and forward to the correct IP-adress (your computer).
2. If you have any sort of firewall installed (F-secure, Norton, ZoneAlarm etc etc), make sure you have opened the port for incoming connections to port 3389 and also that you havent set it for a specific IP (the one you are connecting from, not your computer).
3. If you do see the loginscreen you have enabled the service, otherwise you wouldnt see it at all (doh...). RDC-service doesnt allow blank passwords (unless you know how to hack the service) so you must have a password set for the user you are trying to login as. That user must also be listed in the Remote Desktop Users-list (My computer -> right click -> Properties -> Remote sessions tab -> Users-button).
4. If you have a domain at home (ie with a server that serves as a domaincontroller etc), then you need to fill out that domainname, otherwise LEAVE IT BLANK, you ONLY need to fill out the username and password, nothing else.
5. If you are on a domain and cant login, try login to "Local computer" instead of domainname, RDP might be blocked by the domainpolicies.
6. Try to do this from a computer first, not from your phone... RDC in winmo is a... "RDC Light" really.
This works fine for me, use it both at work and at home... and i work as a network-tech & admin
smuppy said:
4. If you have a domain at home (ie with a server that serves as a domaincontroller etc), then you need to fill out that domainname, otherwise LEAVE IT BLANK, you ONLY need to fill out the username and password, nothing else.
Click to expand...
Click to collapse
There must be more to this than meets the eye, because I am on a workgroup on my home PC, and I have to put the PC name in as the domain, or I can't connect.
It'll obviously do no harm to try it both ways.
Edit:
I just tried it and it works both with and without. It actually worked when I put rubbish in there that relates to absolutely nothing. I guess that means if you're not part of a domain, it doesn't matter what you put in there.
here is my problem:
I would like to connect to my laptop from local network. I can connect perfectly when I type in my IP address into the first textbox (Computer), but I can't connect when I type in my Computer Name (full computer name) into Computer. I tried port forwarding, leaving domain name empty, putting in my workgroup name as a domain, putting in my computer name as a domain, still the same. It won't connect unless I put in the IP address. I would like to do this since my workplace assigns a different IP to my laptop then I assign at home, but naturally I have the same computer name at both places, so I would like to have a permanent setting for both places. Thanks in advance.
Related
I have been playing with my new Kaiser(Tilt) since I got it earlier in the week. Rom is updated and everything is the way I like it. I would like to have my mac to connect to my Kaiser with bluetooth for internet access I just don't know what the AT&T setting are:
-telephone number
-account Name
-and password
I have looked all over and nothing I can find works. The Mac tells me
-A modem error occurred. Please verify your settings and try again.
What can I do to get this working? What setting are you using to make theis work for you?
You have to enable the Internet Sharing app. You can either find it in the Windows folder (IntShrUI), or you can do as I did and perform a hard reset but kill all the carrier customizations. By default, AT&T removes the program shortcut from your Programs folder. Here are some instructions, courtesy of the AT&T forums:
(1) From the Mac, initiate the pairing process with the phone. It will say the phone doesn't have any supported services, but then the last page of the Bluetooth wizard will say it supports a Personal Area Network.
(2) Open the "Internet Sharing" application on the phone.
(3) Change the method used to connect the computer from "USB" to "Bluetooth PAN".
(4) Click "Connect".
(5) On the Mac, click the Bluetooth menu on the Menu Bar and select "Join Network on [device]". (The Internet Sharing app on the phone should now say "Connected".)
Need more info
I got that part down, thanks. It's when it is trying to connect it imideatly disconects and tells me - A modem error occurred. Please verify your settings and try again. What are the settings on the mac side for
-telephone number
-account Name
-and password
Bluetooth PAN doesn't require those settings. It looks like what you're after is Bluetooth DUN. I believe you'll need to use the WModem app that's in the Connections tab. These should be the settings you're seeking:
Type [email protected] in the User name field.
Type CINGULAR1 in the Password field.
In the Dial field, type *99#.
thespiessman said:
I got that part down, thanks. It's when it is trying to connect it imideatly disconects and tells me - A modem error occurred. Please verify your settings and try again. What are the settings on the mac side for
-telephone number
-account Name
-and password
Click to expand...
Click to collapse
At start up, and before TouchFlo 3D loads, I get a message that prompts me to input the password (CINGULAR1) to "Logon to Server"...the Resource is listed as Media Net, and the User ID is listed as [email protected]. I've created a new connection (i.e. My ISP) and set it as default, but the phone still wants to logon to Media Net at start up, however after it is up and running, and I establish a data connection, the phone uses "My ISP" as supposed to Media Net. It is somewhat frustrating to get the "Logon to Server" prompt everytime I turn my phone on, and even if I enter the password (CINGULAR1) and check the box to "Remember the Password", next time I turn off/on the phone it prompts me again. This happens whether or not I select Media Net as the default data connection. Any ideas?
humanoide said:
At start up, and before TouchFlo 3D loads, I get a message that prompts me to input the password (CINGULAR1) to "Logon to Server"...the Resource is listed as Media Net, and the User ID is listed as [email protected]. I've created a new connection (i.e. My ISP) and set it as default, but the phone still wants to logon to Media Net at start up, however after it is up and running, and I establish a data connection, the phone uses "My ISP" as supposed to Media Net. It is somewhat frustrating to get the "Logon to Server" prompt everytime I turn my phone on, and even if I enter the password (CINGULAR1) and check the box to "Remember the Password", next time I turn off/on the phone it prompts me again. This happens whether or not I select Media Net as the default data connection. Any ideas?
Click to expand...
Click to collapse
Are you using the stock rom that came with your phone? have you changed any settings?
i get this too and i have the stock fuze rom without any adjustments to connection settings or anything...
shade
humanoide said:
At start up, and before TouchFlo 3D loads, I get a message that prompts me to input the password (CINGULAR1) to "Logon to Server"...the Resource is listed as Media Net, and the User ID is listed as [email protected]. I've created a new connection (i.e. My ISP) and set it as default, but the phone still wants to logon to Media Net at start up, however after it is up and running, and I establish a data connection, the phone uses "My ISP" as supposed to Media Net. It is somewhat frustrating to get the "Logon to Server" prompt everytime I turn my phone on, and even if I enter the password (CINGULAR1) and check the box to "Remember the Password", next time I turn off/on the phone it prompts me again. This happens whether or not I select Media Net as the default data connection. Any ideas?
Click to expand...
Click to collapse
This happened to me. I ended up going into the settings and removing the user name and password for MediaNet. After doing that, I don't have the problem.
Bingo, that did it...removed user name and password from MEdia Net in Settings/Connections. Thanks.
guys how can i get media net back on my phone? i put the ROMeOS os on my phone and i cant go to the mobile version mymedianet home. so i can view my movie theatres and stuff. thanks!
anyone help please?
ACMilan07 said:
guys how can i get media net back on my phone? i put the ROMeOS os on my phone and i cant go to the mobile version mymedianet home. so i can view my movie theatres and stuff. thanks!
Click to expand...
Click to collapse
start, settings, connections tab, connections, advanced tab, select networks, new, general tab add media net as name,
modem tab:
new, enter media net as name cellular line gprs as modem, next, access point:
wap.cingular
netx, user name and pass blank, finish.
proxy settings tab, check both, network connect to internet and uses a proxy, advanced
add the proxy:
click http server: wireless.cingular.com port 80, no user or pass
socks server: localhost port 1080, no user or pass
ok, ok. ok, ok, x and test
im using proven rom and its been working fine but today my internet no longer works with my isp at all
and media net connection works with opera and checking weather in TF3D along with sending pic msgs but wont work with skyfire, email or other data programs
what could cause this?!?
imtribble said:
This happened to me. I ended up going into the settings and removing the user name and password for MediaNet. After doing that, I don't have the problem.
Click to expand...
Click to collapse
Yeah but can you still send MMS?
I couldn't send MMS. ATT Tech told me to go and re-sign-up @ MYMedia.net (even though all worked fine on my Tilt and 8525 for the last 2 years). Once I re-registered, I could send MMS, but I still have to sign-in when the phone was power cycled or re-booted.
dgduris said:
Yeah but can you still send MMS?
I couldn't send MMS. ATT Tech told me to go and re-sign-up @ MYMedia.net (even though all worked fine on my Tilt and 8525 for the last 2 years). Once I re-registered, I could send MMS, but I still have to sign-in when the phone was power cycled or re-booted.
Click to expand...
Click to collapse
So, what is the solution?
I have the AT&T Fuze with the stock ROM. I purchased it the first day it came out. I think this was 11/11/2008. I have the PDA Personal plan for unlimited data. I have things set up so that my contacts and email synch with our Exchange server. I can remote desktop from my Fuze using the data network to any machine that I can remote to from my computer, so from that, I am thinking VPN must be configured correctly. On one of these machines that I connect to, I have IIS running and put a very simple web page on it (no script, nothing IE specific). From my work computer, it loads fine. I can remote desktop from my Fuze to any machine on the network and launch IE and load it. But, I can't load it directly from my Fuze in either Opera or IE. It does initiate the VPN connection. But, then I get the error HTTP gateway timed out. I'm really not interested in viewing the page that I created. We use Perforce, which is source control system. It has a jobs portion, which we use to track bugs. There is a web interface to the jobs, which is on the intranet, not internet. I don't have rights to remote to the Perforce server, and that is why I initially tried putting a simple page on a machine that i am an admin on. I want to be able to click on a link in my email and have it load the bug in Opera. If I am home and turn on WiFi, and disable the data network, this works fine. This bypasses AT&T's machines, which makes me think there is something that AT&T is blocking. And if they are, then maybe it is the AT&T bloat this is telling them what it is. Our IT guy has verified that I am successfully VPNing in. He is seing the mycingular.net in the firewall.
My boss has the same phone, but purchased more recently, and his is working fine for this. He has flashed the new AT&T test ROM, and done the thing that keeps the AT&T bloat from getting installed.
The fact that remote desktop works, but browsing a webpage on the same machine does not, makes me think there is more to this than just network settings.
If anyone has the anwer to this, please share. If I find the answer, I will post it is well. I have extensively searched the forum for the answer to this, and have not found anything that worked. If I have missed something, I appologize.
Sort of works now, still have an issue
After going to the proxy tab, and checking that This network connects to the Internet and checking the check box that this network uses a porcy server to connect to the internet. Then specify the server. Then go to Advanced and change the HTTP port to 8080 instead of just 80. I also put the user id, password and Domain in on the proxy for HTTP.
But I get prompted for a user id and password from the proxy erveer. I have entered it and clicked the checkbox to save it. It does not display the same info that I entered the next time and it does not display what was entered on the HTTP proxy page. It is a drop down, and I can select the correct one. It's just annoying to need to. I'd like to clear this cache.
Also, to initially get it working I had to disable HSDPA and HSUPA, restart. Then reenable it. I have the registry on my Fuze which give me the menu option on the Advanced network tab to do this.
Figured out how to clear the cache issue - still prompts
The cache was a setting in Opera for passwords.
It still asks for the password. At least it is prefilled with the correct info, since I now only have the one entry, so it is just 1 click, but I should not need to do this step.
Any one know what I need to do to fix this.
If I try to load it in IE, it just tries but never succeeds and never asks for a password, just says Opening.
Connections
Why should I need to set this to connect to the Internet, and use the ISA server? I would think if it needs to connect to the internet, it should be able to just use the Media Net
My Media Net Settings are
Modem -
Name - Modem
Media Net - wap.cingular
Advanced shows the modem in the drop down list as Cellular Line (GPRS, 3G)
The drop down is disabled
Next
Access Point Nam - wap.cingular
Next
User name - [email protected]
don't know what the password is. I've never changed it.
Domain is blank
Next
TPC/IP
Use server - assigned IP address is selected
Use software compression and use IP header compression are checked.
Use slip is not checked and the checkbox is disabled
Servers
Use Servr Assigned addresses is selected
So DN,Alt DNS, WINS, and ALT WINS are disabled.
Proxy Settings
This network connects to the internet
This networks uses a proxy server to connect to the internet is not checked.
More info and additional question
Navigating to some intranet sites does not prompt me for the isa server.
such as http://machine/virtdir/Default.aspx
seems to work without being prompted
but
http://perforcemachine:8080/@md=d&cd=//&[email protected]//?ac=107&mx=25
prompts me for the password.
Also, in order to get either of these links to work, I need to have in my exceptions:
*.companyname.com/*
Where companyname is the actual companyname.
This is annoying because it makes it connect to the VPN when synching with the exchange server. Before I want on the quest to get these links to intranet sites to work, I synched with the exchange server without connecting to the VPN.
I've tried putting in isa.companyname.com in the exceptions, but that doesn't work.
Is there a way to do *.companyname.com/* except mail.companyname.com?
I suspect all of this is in the registry somewhere.
Hi,
At my university, after connecting to the campus wifi network, the browser instantaneously is redirected to a website where I need to log in before I can surf the web.
Is there an app for android that allows me to save my username and password so that i automatically sign in when i connect to the network?
Thanks
//I dont know how to describe it
+1 for this
can tasker do this?
if so how?
pls help me here http://forum.xda-developers.com/showthread.php?p=11344919#post11344919 post#38
thanks
it seems that the browser on my phone can remenber the user name and password automatically...
Dolphin browser has an add-on called "Dolphin Password Manager" that does this.
Yeah, the password manager rocks!
is there an alternate method? id like to use the stock browser if possible
Wondering this too
you can try easy wifi
There is Open Wifi Login on the Android Market. It will save your username and password. It will automatically log in when the wifi network is detected. I used this at my school and it worked well.
It did change is name to Wifi Web Login which is paid app.
I am wondering about this too. When at my school, I connect to a wifi, I have to open the browser and enter my username and pass, otherwise connecting to wifi is useless. I want to make it automatic with password already saved within.
raviluke said:
I am wondering about this too. When at my school, I connect to a wifi, I have to open the browser and enter my username and pass, otherwise connecting to wifi is useless. I want to make it automatic with password already saved within.
Click to expand...
Click to collapse
Check out my post above yours and try it out.
Im trying to connect my Infuse to a ms exchange server. The phone is running 2.2 and is not rooted. I have selected setup a new mail account. I have put in the following:
[email protected]password
Then I hit "manual setup" and selected ms exchange server.
Then for "domain\username" i have sunsetcorp\username
Password is entered
for "exchange server" I have mail.sunset.corp
Then I also have use secure connection and accept all ssl certificates checked.
Its says "checking incoming server settings". Then I get "Setup could not finish ... unable to connect to server"
Do I the settings wrong or am I missing something?
Looks like u have it set ok. I have to do [email protected]/password and run it multiple times to get it to sync the first time. Keep trying its not perfect at all. You can also try droidmail if u still can't get it
Tenacious--M said:
Im trying to connect my Infuse to a ms exchange server. The phone is running 2.2 and is not rooted. I have selected setup a new mail account. I have put in the following:
[email protected]password
Then I hit "manual setup" and selected ms exchange server.
Then for "domain\username" i have sunsetcorp\username
Password is entered
for "exchange server" I have mail.sunset.corp
Then I also have use secure connection and accept all ssl certificates checked.
Its says "checking incoming server settings". Then I get "Setup could not finish ... unable to connect to server"
Do I the settings wrong or am I missing something?
Click to expand...
Click to collapse
I would ask your IT dept. for the exact server information to be sure you are inputting the correct server info. Everything else is good to go in your setup so it has to be the server name is not correct causing the failed connection.
Tenacious--M said:
Im trying to connect my Infuse to a ms exchange server. The phone is running 2.2 and is not rooted. I have selected setup a new mail account. I have put in the following:
[email protected]password
Then I hit "manual setup" and selected ms exchange server.
Then for "domain\username" i have sunsetcorp\username
Password is entered
for "exchange server" I have mail.sunset.corp
Then I also have use secure connection and accept all ssl certificates checked.
Its says "checking incoming server settings". Then I get "Setup could not finish ... unable to connect to server"
Do I the settings wrong or am I missing something?
Click to expand...
Click to collapse
Take out the domain setup all together.
I run SBS 2003 and you do not need to set up the domain. I run the following on dozens of phones.......
Domain/Username (must be exact usually with no spaces)
Password (case sensitive)
Exchange Server (mail.yourcompany.com)
uncheck Use secure connection (You can check it later if you wish after you have it working)
Hope this helps! If so please hit the thanks button for me!
For the exchange server try using the IP address of the server. This is the only way I could get mine to work.
This sounds silly, but have you ever connected another phone to this server? That setting isn't always available. Also, I've found the / or \ can make a huge difference. Also, check to make sure you are using the primary email account and not a secondary alias for the username. The email address can be an alias but username has to be the actual NT username. Hope that helps!
Sent from my SAMSUNG-SGH-I997 using XDA App
Have been using Exchange for years and work very closely with our Exchange guy's and the username must be Domain\Username if you are on a 2003 box and usually but not always the username on 2007/2010 would be the email address but the Domain\Username should also work according to the experts. If you are using Active Sync which we are I am pretty sure that SSL is a requirement because it connects to Exchange using RPC over HTTP protocol and requires SSL being enabled. Like I said a quick call to your IT people should get it working toot sweet.
Blackberrynomore said:
Have been using Exchange for years and work very closely with our Exchange guy's and the username must be Domain\Username if you are on a 2003 box and usually but not always the username on 2007/2010 would be the email address but the Domain\Username should also work according to the experts. If you are using Active Sync which we are I am pretty sure that SSL is a requirement because it connects to Exchange using RPC over HTTP protocol and requires SSL being enabled. Like I said a quick call to your IT people should get it working toot sweet.
Click to expand...
Click to collapse
I use SBS2003 and do not have the domain name. User name only. (the domain username though) Been working for years that way. mail server is the important one to have the domain address correct in. mail.xxxxxxx.com
If I put the domain name in front of the username it does not connect.....
I suddenly have a problem after loading Zeus. My external SD card is working fine then when I set up the exchanger server and get my mail working it wants to encrypt the SD card (according to company policy)
Now I no longer have access to the SD card, it says cannot mount or format and I if I remove the exchange account I get the SD card back.
madpb said:
I suddenly have a problem after loading Zeus. My external SD card is working fine then when I set up the exchanger server and get my mail working it wants to encrypt the SD card (according to company policy)
Now I no longer have access to the SD card, it says cannot mount or format and I if I remove the exchange account I get the SD card back.
Click to expand...
Click to collapse
Mine is doing the exact same thing. I loose the external SD card and I get it back if I remove the exchange account.
Any ideas??
I still cannot figure out why I loose my external SD card.I have re imaged the phone, changed sd-cards.. no fix in sight