Related
First off let me say ive searched this site high and low and tried almost every .cab ive found and followed plenty of setup instructions but still for the life of me cannot get MMS to work. email i get no problems sending texts i get no problems. but no MMS , and i think ive tried everything on this site.... im running Farias WM6 rom , and love it.
I had MMS working on the phone before i had to reflash beacuse i updated a radio rom and it almost bricked it.... so i followed all the instructions again just like usual and reflashed the downgrade rom and then upgraded to farias. I just dont remember what it was i did to get MMS working before
If someone could help me out it would be much appreciated.....
Maybe we could start a sticky entitled " How to get your MMS back after flashing "
Thanks in advance guys.
You have absolutely no MMS? You cannot receive or send MMS? Who's your carrier?
kegobeer said:
You have absolutely no MMS? You cannot receive or send MMS? Who's your carrier?
Click to expand...
Click to collapse
Yea , no MMS at all......
cant recieve or send.....
I had it working on the Faria rom before i had to reflash.....
all i keep getting is " error syncronizing " everytime i try to hit " send/recieve"
I had the same issue, go under the MMS settings, then goto server, select Cingular MMS or whoever your carrier is, mine wascingular, and then set it to the default and delete the one named default
If there is not other one besides deafault, then you need to ask your provider for your settings and add it.
hope this helps
This might be helpful to others , but i tried it still no worky for me.
stolen from " Jon " on howard forums
Ah! This sorta illustrates the problem. I had mentioned that I couldn't seem to send MMS, although I *could* browse the web via GPRS.
Well...I spent some time on the phone with T-Mobile "PDA Support" and finally have this figured out! There's been talk here about using the two different APN's available to T-Mobile Internet customers for WAP and MMS versus regular website browsing.
When I spoke with T-Mobile PDA Support, I was told a few things:
1) they've had some network problems that aren't 100% resolved that could be messing up our ability to browse the net, consistently get EDGE speeds, or send MMS messages.
2) MMS is supposed to be sent over their WAP gateway, so for this, you should use "wap.voicestream.com" as your APN.
3) Web browsing for full HTML web pages is supposed to be done over their non-protocol-restricted internet gateway, so for this, you should specify "internet2.voicestream.com" as the APN.
I did some experimenting, and it seems that I cannot send MMS when I connect via "internet2.voicestream.com", and I cannot browse the web when I connect via "wap.voicestream.com". But, as the gentleman from T-Mobile PDA Support suggested, when I chose the APN appropriate to the task, I succeeded. I tried this several times with consistent results.
I think I saw some discussion here about manually selecting the GPRS connection each time so you get the right gateway. But with a bit of configuration work up front, you can make this work automatically. Here's how:
The essence of the solution is that you should have TWO different connection setting groups - one for Internet Browsing and email, and one for MMS. Then, you can have the first one automatically invoked when your application tries to connect to the Internet, and you can have the MMS application automatically select the second connection group when it's trying to send an MMS message.
So -- Most, if not all, of you have a connection group named "T-Mobile GPRS". To examine it, click on:
Start / Settings / Connections and then tap the Connections icon. With the Tasks tab selected, you should see two connection groups listed, along with three choices under each one for tasks you can perform.
Under the connection group named "T-Mobile GPRS", click "Manage existing connections" -- you should be on the "Modem" tab -- if not, select it now.
This page shows a table in which you can list various network connections that this connection group can use to send and receive data. Since it seems that the three APNs that we know about are special purpose (one for WAP/MMS, one for Internet, one for VPN), it does NOT make sense to mix them here and let WM5 try to figure out which is best to use -- you will wind up with inconsistent results (i.e., works sometimes, but not others, seemingly at random).
Instead, since this "T-Mobile GPRS" connection group is for Internet browsing, the one and only connection you want to specify here is one that will use the "internet2" APN.
But first, click on the "Proxy Settings" tab below, and just click the box labeled, "This network connects to the Internet", and make sure the other boxes on the pages are blank (no proxy server specified here!). When you're done, select the "Modem" tab again (you might have to minimize the keyboard display at the bottom to see the tabs).
If you don't have a data connection yet that uses the internet2 APN, you can click on "New", then give it a descriptive name (such as "Internet connection"), select "Cellular Line (GPRS)" as the modem, click "Next", and input "internet2.voicestream.com" as the APN, click "Next" again, leave the user name, password and domain all blank and click "finish".
Click "ok" at the top a couple of times and you should be done with the connection group that gets you to the Internet.
Now - we'll create a separate connection group for MMS:
Go back into "Start / Settings / Connections" and tap the "Connections" icon again. You're back at the "Connections" screen that lists your two most recently defined "connection groups" -- the top one should be "T-Mobile GPRS" since we just worked on it. Click on "Add a new modem connection". Even though this line appears under "T-Mobile GPRS", you'll actually be creating a new and separate connection group.
You'll see a screen entitled, "Make a New Connection". Give it a meaningful name -- I chose "WAP connection". Select "Cellular Line (GPRS)" as the modem, and click "Next". This time, under Access Point Name, specify "wap.voicestream.com". Click next and make sure on the "My Connection" screen that user, password and domain are blank, then click "Finish".
You will now have separate connection groups for Internet Access and for MMS tranmission.
The next step is what makes this work automatically. Close all the windows until you're at the "today" screen again. Click "Start" and then "Messaging". If you don't see "MMS" at the top left of the screen, click the "Menu" button at the lower right, click on "Switch Accounts" and select "MMS".
Click "Menu" again, and then click "MMS Configuration...". You'll see three tabs: "Preferences", "Servers" and "About".
The preferences tab has non-critical choices that you should set to meet your own needs.
On the Servers tab, you should see a single server listed, "T-Mobile MMS" -- this was installed by one of the T-Mobile customizations when you first booted up your MDA. Click on this , and you'll see a screen that details the configurat ion of this server. Here's what you want in the config:
Server Name: non-critical, T-Mobile named it, "T-Mobile MMS", so you should probably leave it at that.
Gateway: 216.155.165.50
Port Number: 8080
Server address: http://215.155.174.84/servlets/mms
...and HERE is where we tell it to automatically switch to our network connection that was set up for MMS:
Where it says, "Connect via:", the default that T-Mobile put in was your old "T-Mobile GPRS" connection. Instead, I clicked the drop-down arrow and selected the new connection that we created way up above that references the "wap.voicestream.com" APN, called something like "MMS Connection".
Sending size limitation as locked at 292k. WAP Version defaults to 2.0, but you can drop it down to 1.2 if you have some reason to do this (I don't).
Once this is all set right, click "OK", and "ok" your way back out of the messaging application.
Now you're ready for a test:
There are many way to initiate an MMS. However you do it, when it starts up, you should see it connecting to GPRS via your "MMS Connection", it will then send your MMS and disconnect from GPRS again after a bit.
Open up PIE again and select a website, and this time you'll see GPRS connecting via your first connection group -- the one that uses "internet2.voicestream.com" as the APN.
You can go back and forth several times -- this setup will select the correct network connection group each time, and work.
The ONLY issue I've seen with this is the following:
If your GPRS connection for one type of activity is still connected when you try launching the other service, it doesn't seem smart enough to force the old connection to disconnect first. So...if your old connection hasn't time out yet, you may have to click on the "G" icon (top of your today screen) and select "disconnect" before starting your other activity. But that's it -- aside from this, all the APN switching is automatic -- and works perfectly.
Click to expand...
Click to collapse
ok now im able to send but when it gets to 99% i get a message
" gateway + timeout "
and the message isnt sent
Data Cab
Maybe this is the post you are looking for?
Tmo MMS fix from this thread Receiving TINY Picture Messages!
I have found google search is the best way to search xda-developers.
Just type your search item followed by
site:xda-developers.com
Exp. [tmo mms cabs site:xda-developers.com]
Peace
sYnOnYx said:
ok now im able to send but when it gets to 99% i get a message
" gateway + timeout "
and the message isnt sent
Click to expand...
Click to collapse
sounds like what ever your server settings are, your gateway setting is wrong.
gdribot said:
Maybe this is the post you are looking for?
Tmo MMS fix from this thread Receiving TINY Picture Messages!
I have found google search is the best way to search xda-developers.
Just type your search item followed by
site:xda-developers.com
Exp. [tmo mms cabs site:xda-developers.com]
Peace
Click to expand...
Click to collapse
Ive tried it 2x already and no worky.......
and now im back to " error syncronizing "
*siigh*
Now its connecting up again , and it connects to (edge) Tmo MMS
but it gets to 66% sent on the status and i get
" next hop connection failed "
Someone just texed me and said " nice pic " so i guess it worked ??
not holding my breath just yet, but praying !
*sigh* *arrrrrrrrrrrrrrrrrrrrrrrgggggg*
now its just connects and disconnects.........
Here are my settings tell me if something is wrong :
Under my MMS configuration ( found from the messaging menu )
Servers :
Sever name : T-mobile MMS
Gateway : 216.155.165.50
Port number : 8080
Sever Address : Http://215.155.174.84/servlets/mms
Connect VIA : T-mobile MMS
And
Settings > Connections > connections Icon
Tmobile MMS then under " manage existing connections "
Name : T-mobile MMS
Select a modem : Cellular line (GPRS)
Access Point name : wap.voicestream.com
Username : blank ( ive tried imputting tmobile in there and nothing still )
password: blank ( ive tried imputting tmobile in there and nothing still )
domain : blank
In the advanced tab under TCP/IP :" use server IP address is selected " and
nothing else is.
under servers on the advanced tab " use server-assigned addresses " is only selected.
any clues ?
back to the "Gateway+timeout" error.... sigh...
i dont know what the hell i did , but its sending messages now.........
still havent recieved one tho.
i think im gonna have to do a writeup tho.
Do you use wifi? When wifi is on my MMS doesn't work.
Did you ever figure out what was happening. I'm having a similar problem. As far as I can tell all the setting you listed above are correct, and I have mine set the same. When I try to send a message it hangs at 87% and never completes. Once it ran up to 99% then I got the "Gateway Timeout" error.
What version of the ARCSoft MMS client are you using?
I cannot get it to send or connect at all unless I use one of the CABs for the settings floating around - then it works, but that causes other NASTY side effects on WM6.
Just the one that came with the rom that I loaded, [02/Nov/2007] TNT.1933, ArcSoft 4.2.8.1 with plug-in and full features. The settings seem to connect, the message just won't complete sending.
I'm not able to get it to connect unless I use the T-Mobile CAB (manually configuring does NOT work) and that breaks data connections when on sync.
I have a Cingular 8525 with WM5, using the lastest version of Activesync. I do not have wifi or 3g internet connection on my cell phone. Everything is synced and seems to be working fine but PIE doesn't work.
My Network management settings are:
Programs that automatically connect to the Internet should connect using: "My ISP"
Programs that automatically connect to a private network should connect using: "My ISP"
Under Connections it reads: My ISP, and for select a modem it says "Cellular Line"
How do I enable my phone to use pocket internet explorer when cradled? The reason is that my RSS reader cannot update because IE cannot connect.
Save me! I spent the last 4 hours trying to fix this problem.
Hi,
I had the same problem some time ago.
In ActiveSync\File\Connections I had to tick "This computer is connected to: The internet". Now it works.
xunkn0vvnx said:
I have a Cingular 8525 with WM5, using the lastest version of Activesync. I do not have wifi or 3g internet connection on my cell phone. Everything is synced and seems to be working fine but PIE doesn't work.
My Network management settings are:
Programs that automatically connect to the Internet should connect using: "My ISP"
Programs that automatically connect to a private network should connect using: "My ISP"
Under Connections it reads: My ISP, and for select a modem it says "Cellular Line"
How do I enable my phone to use pocket internet explorer when cradled? The reason is that my RSS reader cannot update because IE cannot connect.
Save me! I spent the last 4 hours trying to fix this problem.
Click to expand...
Click to collapse
Change "cellular line" to "cellular line GPRS" from the scroll down box.
The saga still continues to no avail...
i clicked "This computer is connected to the internet"
and also selected "Cellular line GPRS"
What do I enter for Access point name, username, password, etc.
This is getting really annoying.
xunkn0vvnx said:
The saga still continues to no avail...
i clicked "This computer is connected to the internet"
and also selected "Cellular line GPRS"
What do I enter for Access point name, username, password, etc.
This is getting really annoying.
Click to expand...
Click to collapse
Follow the screen shots in order 1-4. access point: wap.cingular(lower case) User: [email protected](all caps) Password: CINGULAR1 (all caps)
8125
2.25.11.1
Still nothing, when I right click and try to connect it says
"Cannot Connect
The current connection cannot be used for your request. Please end the current connection and try again."
xunkn0vvnx said:
Still nothing, when I right click and try to connect it says
"Cannot Connect
The current connection cannot be used for your request. Please end the current connection and try again."
Click to expand...
Click to collapse
Is AT&T your carrier? When did all this begin happening? The settings I've given you are to be made directly on your device, and not from a PC. Try "auto pick" instead of ISP GPRS, and see if that helps.
hotdog53 said:
Is AT&T your carrier? When did all this begin happening? The settings I've given you are to be made directly on your device, and not from a PC. Try "auto pick" instead of ISP GPRS, and see if that helps.
Click to expand...
Click to collapse
One more thing to try: go to your connections settings, tap on advanced (at bottom) select MediaNet from scroll box, tap "proxy" the box that says it uses a proxy to connect should be unchecked (empty) The top box should be checked. You haven't done any internet connection tweaks in the registry have you?
0 internet registry tweaks, do you think you could link me to the cab that should be able to fix this for me?
Either way, and despite whether or not this gets fixed, thank you, thank you, for helping me.
xunkn0vvnx said:
0 internet registry tweaks, do you think you could link me to the cab that should be able to fix this for me?
Either way, and despite whether or not this gets fixed, thank you, thank you, for helping me.
Click to expand...
Click to collapse
Sorry man, I don't have the cabs for this fix. I remember reading about someone having the same problems and a cab fix was requested. Can't remember where I read about it. I recommend a forum or google search for the cab fix...I'm pretty sure you'll find what you need.
Ok here is the weird thing... I am running SPB mobile, and when I sync my weather is able to update for New York, NY. Doesn't that mean it must be getting an internet connection through PIE? DOes SPB mobile mess with the registry?
Anybody? Lately I've been using WiFi to update my phone but Id rather have it work when it is cradled.
any reason why the above should not work "out of the box". i have been tethering fine with my BJ1 but got my FUZE yesterday and it's not working. Says "waiting for network" then "remote party has ended this connection".
i did try installing the modem drivers from the CD, did not help.
what is the most common cause of ICS not working with vista over USB?
thanks in advance.
did you uncheck enable advanced network functionality? Its checked as defualt. Uncheck it and try again.
more ICS help needed
hondaguyjoe said:
did you uncheck enable advanced network functionality? Its checked as defualt. Uncheck it and try again.
Click to expand...
Click to collapse
i tried that, still does not work.
in VISTA i briefly see the RNDIS network connection go to enabled but quickly goes to disabled when the handset says "remote party has ended..."
on the FUZE i have
Settings | Connections | Wireless Manager | Data Connection = On
and the only thing i changed during my trouble shooting is
Media Net | Select a Modem = Cellular Line (GPRS, 3G)
settings also have wap.cingular as it should, and don't know what the preset password is - i haven't touched it. should i use the password that i know worked on the BJ1?
also, in WiFi Settings, does the Remote NDIS network adapter settings play into this? i put it on DHCP and it also says "connect to work" - should that be "internet"?
thanks
raywright1 said:
i tried that, still does not work.
in VISTA i briefly see the RNDIS network connection go to enabled but quickly goes to disabled when the handset says "remote party has ended..."
on the FUZE i have
Settings | Connections | Wireless Manager | Data Connection = On
and the only thing i changed during my trouble shooting is
Media Net | Select a Modem = Cellular Line (GPRS, 3G)
settings also have wap.cingular as it should, and don't know what the preset password is - i haven't touched it. should i use the password that i know worked on the BJ1?
also, in WiFi Settings, does the Remote NDIS network adapter settings play into this? i put it on DHCP and it also says "connect to work" - should that be "internet"?
thanks
Click to expand...
Click to collapse
Ok Im having the same problem I guess I should of tried it before opening my mouth lol
on my 8525 running WM6.1 it works flawlessly PC connection is set to usb and network connection is to media net.
On the fuze I get the same error you do something like connecton to host failed....
so now I'm on the please help me list with you!
I spoke to someone a rep friend of mine and he said they disabled the ability to tether. You need to have the tethering plan in order for it to work.
Hmm, seems like somebody's going to need to hack around that
jasongw said:
Hmm, seems like somebody's going to need to hack around that
Click to expand...
Click to collapse
Yeah really! looks like I wont be getting rid of my tytn any time soon its going to suck to swap out sims everytime I want to tether to my laptop.
I had a similar issue:
An unlocked and custom-ROM Wizard worked with ICS just fine. My new Samsung Epix kept spitting out the dreaded "The remote party has ended this connection" almost immediately upon clicking Connect in ICS.
I see you already have MediaNET pointed to wap.cingular
I found I had to add the username and password:
[email protected]
CINGULAR1
I also set GPRS Authentication for MediaNET to CHAP.
I am internet sharing 3G beautifully over Bluetooth with Vista64.
ICS problems (cont'd)
cjones277 said:
I had a similar issue:
MediaNET pointed to wap.cingular
[email protected]
CINGULAR1
GPRS Authentication for MediaNET to CHAP.
Click to expand...
Click to collapse
this is consistent with my BJ1 settings and works fine on that device. i have the same settings on the fuze.
did you do anything on the Vista side?
did you have to install the drivers from the CD?
any other settings that i should know about?
I had the same problem. This workaround seems to be working for me, though:
0. Make sure phone is NOT connected to computer
1. Go to Start -> Programs -> Internet Sharing
2. Set the PC Connection to USB and the Network Connection to Media Net
3. Click Connect
4. Connect USB cable to computer
ITNV said:
I had the same problem. This workaround seems to be working for me, though:
0. Make sure phone is NOT connected to computer
1. Go to Start -> Programs -> Internet Sharing
2. Set the PC Connection to USB and the Network Connection to Media Net
3. Click Connect
4. Connect USB cable to computer
Click to expand...
Click to collapse
This is what I do on my 8525 but on the fuze no luck :-(
Im going to try and do a hard reset and stop it from installing the at&t stuff and see if it works.
ITNV said:
I had the same problem. This workaround seems to be working for me, though:
0. Make sure phone is NOT connected to computer
1. Go to Start -> Programs -> Internet Sharing
2. Set the PC Connection to USB and the Network Connection to Media Net
3. Click Connect
4. Connect USB cable to computer
Click to expand...
Click to collapse
Network connection drop down seems to be absent in internet sharing on my Fuze... hmmm...
Well the hard reset with no extra stuff installed did not work :-(
I hope some HTC wizard can figure this out.
I think this is a Windows Mobile registry settings issue, not an HTC issue. They set it this way at the request of AT&T.
Got this from:
http://forum.xda-developers.com/showthread.php?t=437796&page=2
This may actually fix both the missing Network drop-down and the "Remote party has ended the connection" issue. Its for Sprint, but worked for me. Just substitute MediaNET for Sprint.
After my first post, I had to do a Hard Reset and then the issue jamorgan2008 is having (Network drop-down not showing). I didn't have this the first time. I looked up the Registry Key and it had Cingular ISP as the ForceCellConnection value. I deleted it and am back on again. As such, this may also fix your issue as well, hondaguyjoe. Do you have the Network option in Internet Sharing or just PC Connection? You may need a Mobile Registry Editor for this.
See below:
Originally Posted by mcgowanbl View Post
This works with standard $15/month Sprint PCS Vision plan.
No you do not need to purchase Phone As Modem plan.
No they will not charge you extra because there's no way for them to known you tethering to a pc.
I have two Touch Diamonds (not Pro's).
One for my wife and one for me.
My Internet sharing (Start\Programs\Internet sharing) only has one drop down menu, "PC Connection".
My wife's has two drop downs "PC Connection" AND "Network connection".
Now I bought her's two days after mine at the same Sprint store.
Her Internet connection shares Internet via USB connected directly to a PC without issue.
Mine doesn't since I have not been able to set the missing "Network connection" drop down menu option to the appropriate setting of "Sprint". Instead it either say Waiting for network or error 67 invalid username and password (something like that)
I deleted the key: (not just the value)
[HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings]
ForceCellConnection
Now I got the second drop down menu "Network connection", restarted the phone and now it works like a champ.
cjones277 said:
I think this is a Windows Mobile registry settings issue, not an HTC issue. They set it this way at the request of AT&T.
Got this from:
http://forum.xda-developers.com/showthread.php?t=437796&page=2
This may actually fix both the missing Network drop-down and the "Remote party has ended the connection" issue. Its for Sprint, but worked for me. Just substitute MediaNET for Sprint.
After my first post, I had to do a Hard Reset and then the issue jamorgan2008 is having (Network drop-down not showing). I didn't have this the first time. I looked up the Registry Key and it had Cingular ISP as the ForceCellConnection value. I deleted it and am back on again. As such, this may also fix your issue as well, hondaguyjoe. Do you have the Network option in Internet Sharing or just PC Connection? You may need a Mobile Registry Editor for this.
See below:
Originally Posted by mcgowanbl View Post
This works with standard $15/month Sprint PCS Vision plan.
No you do not need to purchase Phone As Modem plan.
No they will not charge you extra because there's no way for them to known you tethering to a pc.
I have two Touch Diamonds (not Pro's).
One for my wife and one for me.
My Internet sharing (Start\Programs\Internet sharing) only has one drop down menu, "PC Connection".
My wife's has two drop downs "PC Connection" AND "Network connection".
Now I bought her's two days after mine at the same Sprint store.
Her Internet connection shares Internet via USB connected directly to a PC without issue.
Mine doesn't since I have not been able to set the missing "Network connection" drop down menu option to the appropriate setting of "Sprint". Instead it either say Waiting for network or error 67 invalid username and password (something like that)
I deleted the key: (not just the value)
[HKEY_LOCAL_MACHINE\Comm\InternetSharing\settings]
ForceCellConnection
Now I got the second drop down menu "Network connection", restarted the phone and now it works like a champ.
Click to expand...
Click to collapse
Works great!!! Posting now from my MBP via Fuze!
Sweet thanks this board is great!! *sent from my note book via fuze"
New issue I have the 3G icon with 2 bars but when I connect to the notebook it switches to edge. I can browse on the device with 3G but once I press connect it goes to edge.
Any ideas?
Thanks
hondaguyjoe said:
New issue I have the 3G icon with 2 bars but when I connect to the notebook it switches to edge. I can browse on the device with 3G but once I press connect it goes to edge.
Any ideas?
Thanks
Click to expand...
Click to collapse
Im not seeing this issue with bluetooth... perhaps you are in a poor reception area. Are you using a usb cable or bluetooth?
What are you using to edit the registry with?
Arius1 said:
What are you using to edit the registry with?
Click to expand...
Click to collapse
Search Google for PHM Registry Editor.
At start up, and before TouchFlo 3D loads, I get a message that prompts me to input the password (CINGULAR1) to "Logon to Server"...the Resource is listed as Media Net, and the User ID is listed as [email protected]. I've created a new connection (i.e. My ISP) and set it as default, but the phone still wants to logon to Media Net at start up, however after it is up and running, and I establish a data connection, the phone uses "My ISP" as supposed to Media Net. It is somewhat frustrating to get the "Logon to Server" prompt everytime I turn my phone on, and even if I enter the password (CINGULAR1) and check the box to "Remember the Password", next time I turn off/on the phone it prompts me again. This happens whether or not I select Media Net as the default data connection. Any ideas?
humanoide said:
At start up, and before TouchFlo 3D loads, I get a message that prompts me to input the password (CINGULAR1) to "Logon to Server"...the Resource is listed as Media Net, and the User ID is listed as [email protected]. I've created a new connection (i.e. My ISP) and set it as default, but the phone still wants to logon to Media Net at start up, however after it is up and running, and I establish a data connection, the phone uses "My ISP" as supposed to Media Net. It is somewhat frustrating to get the "Logon to Server" prompt everytime I turn my phone on, and even if I enter the password (CINGULAR1) and check the box to "Remember the Password", next time I turn off/on the phone it prompts me again. This happens whether or not I select Media Net as the default data connection. Any ideas?
Click to expand...
Click to collapse
Are you using the stock rom that came with your phone? have you changed any settings?
i get this too and i have the stock fuze rom without any adjustments to connection settings or anything...
shade
humanoide said:
At start up, and before TouchFlo 3D loads, I get a message that prompts me to input the password (CINGULAR1) to "Logon to Server"...the Resource is listed as Media Net, and the User ID is listed as [email protected]. I've created a new connection (i.e. My ISP) and set it as default, but the phone still wants to logon to Media Net at start up, however after it is up and running, and I establish a data connection, the phone uses "My ISP" as supposed to Media Net. It is somewhat frustrating to get the "Logon to Server" prompt everytime I turn my phone on, and even if I enter the password (CINGULAR1) and check the box to "Remember the Password", next time I turn off/on the phone it prompts me again. This happens whether or not I select Media Net as the default data connection. Any ideas?
Click to expand...
Click to collapse
This happened to me. I ended up going into the settings and removing the user name and password for MediaNet. After doing that, I don't have the problem.
Bingo, that did it...removed user name and password from MEdia Net in Settings/Connections. Thanks.
guys how can i get media net back on my phone? i put the ROMeOS os on my phone and i cant go to the mobile version mymedianet home. so i can view my movie theatres and stuff. thanks!
anyone help please?
ACMilan07 said:
guys how can i get media net back on my phone? i put the ROMeOS os on my phone and i cant go to the mobile version mymedianet home. so i can view my movie theatres and stuff. thanks!
Click to expand...
Click to collapse
start, settings, connections tab, connections, advanced tab, select networks, new, general tab add media net as name,
modem tab:
new, enter media net as name cellular line gprs as modem, next, access point:
wap.cingular
netx, user name and pass blank, finish.
proxy settings tab, check both, network connect to internet and uses a proxy, advanced
add the proxy:
click http server: wireless.cingular.com port 80, no user or pass
socks server: localhost port 1080, no user or pass
ok, ok. ok, ok, x and test
im using proven rom and its been working fine but today my internet no longer works with my isp at all
and media net connection works with opera and checking weather in TF3D along with sending pic msgs but wont work with skyfire, email or other data programs
what could cause this?!?
imtribble said:
This happened to me. I ended up going into the settings and removing the user name and password for MediaNet. After doing that, I don't have the problem.
Click to expand...
Click to collapse
Yeah but can you still send MMS?
I couldn't send MMS. ATT Tech told me to go and re-sign-up @ MYMedia.net (even though all worked fine on my Tilt and 8525 for the last 2 years). Once I re-registered, I could send MMS, but I still have to sign-in when the phone was power cycled or re-booted.
dgduris said:
Yeah but can you still send MMS?
I couldn't send MMS. ATT Tech told me to go and re-sign-up @ MYMedia.net (even though all worked fine on my Tilt and 8525 for the last 2 years). Once I re-registered, I could send MMS, but I still have to sign-in when the phone was power cycled or re-booted.
Click to expand...
Click to collapse
So, what is the solution?
Hi to ALL,
I got a Treo 750 AT&T from a friend who got back from the U.S...Am now in the Philippines and am using a local network (SMART). I am having a problem however in sending MMS files. everytime i try, there is a prompt which says, "connecting to AT&T...GPRS and 3G... and then the MMS stays in the outbox folder..this happens everytime i try to send an MMS. It won't access to the Internet explorer either...the only thuing I can use is sending text messages...the rest of the functions won't work. I am confused now as to how am I gonna use my treo phone to its maximum features.. I hope somenoe can help me on this...
Thank you.
It seems your phone is trying to access Internet using connection settings for previous US operator. Did you make all the settings for your local network (Start > Settings > Connections > etc.)?
a guide how to do it
1. Start, Settings, Connections, and then tap the Connections Icon
2. Under "My Work Network" tap Add a New Modem Connection
3. Name it Picture Messaging and under Select a modem select (GPRS,3G)
4. Under Access Point Name type: ____________ (ask your cell company)
5. Username, Password, and Domain is left blank and then click Finish
6. Now, go into Proxy Settings and check "This network connects to the Internet" and check "This network uses a proxy server to connect to the internet"
7. Under the Proxy Server box type: _________ (ask your cell company)
8. Tap the advanced button and tap on the HTTP line. Make sure the HTTP settings shows __________ (ask your cell company)
9. Click the OK button a few times to get out of the settings completely.
10.Now go to Start, Messaging, Menu, then Options, Advance, then Click Manual, and then the Edit button
11. Message center number _________ (ask your cell company)
12. Email center number is _____ (ask your cell company)
13. MMS gateway address is ___________ (ask your cell company)
14. MMS URL is http://xxx.xxx.xxx.xxx/servlets/mms (ask your cell company)
15. Finally under Network Profile select: My Work Network and then click ok.
Thank you very much for sending me this procedure to correct the setting of my mobile phone. I will coordinate with my Local network here in the Phils. to supply the needed settings.
Best regards,
Abrille
Dear All,
I have followed the instructions that you have given to me but still I couldn't access and/or browse the internet as well as receiving MMS format files. I tried to access and view some threads and I happened to see an email thread that gives an instruction on how to Re-flash/Unbrand a Palm Treo 750... I would like to ask your expertise Sirs if this is the next possible way or solution to solve the problem with my Treo 750? I hope someone can help me on this...thank you and more power to all.
Abrille
To access internet via Internet Explorer, you need the correct GPRS/WAP settings to tell it to use the right APN.
Try the settings listed here:
http://smart.com.ph/corporate/support/FAQs/GPRS+and+MMS+settings.htm
To set up a new GPRS connection profile use this:
http://www.microsoft.com/windowsmob...-cellular-grps-internet-connection-touch.aspx