I'm using an Lg KS20 with farahbolsey's WM6.5 rom(build 23071) and after a soft reset I couldn't change my keyboard anymore, I tried uninstalling every keyboard I had, but I can't even change to transcriber does anyone know how I can fix this without doing a hard reset?
Biglia05 said:
I'm using an Lg KS20 with farahbolsey's WM6.5 rom(build 23071) and after a soft reset I couldn't change my keyboard anymore, I tried uninstalling every keyboard I had, but I can't even change to transcriber does anyone know how I can fix this without doing a hard reset?
Click to expand...
Click to collapse
Try installing SIPChange and see if you can use the program to force a keyboard after a soft reset.
Doesn't work, anyway I upgraded to 6.5.3 now and I can change keyboards now. Thanks anyway for the help
SOLUTION (That worked for me)
Hi all,
I had the same issue and found a solution that worked for me. It was Opera 10 beta 2. Since I installed that I could still change the SIP but after a soft reset the problem appeared. I could not change to third party SIPs.
So I hard reset the device and installed the apps all over again. After installing Opera and restarting (or soft resetting the device) the problem appeared again.
After uninstalling I could change the SIP immidiatly.
Sarah
Thanks, that did the trick, now only to find a better browser...
Related
Hi All
Just discovered by accident really that the mail account and BT profiles don't dissapear if you can do a hard reset by software rather than a poke up your pda's bottom, for months I have had problems with this, but I installed the arcsoft mms cab which initiates a software 'hard reset' this was the first time I had hard reset my phone since installing smart1's wm6. I was expecting all profiles to dissapear, but......they are all still there.
I would assume this has happened because some registry settings were written to the device on a programmed reset, which are not if you hard reset it with a poke.
So after you have setup all your mail and BT profiles, install the mms cab (or any other program that will allow a reset, and your profiles remain.
JD
You are talking about SOFT RESETS not HARD RESETS!
Soft Reset = Simple reboot
Hard Reset = Wipe to factory defaults, data lost.
But yes, you are correct in stating that a Soft Reset via software keeps all Bluetooth, WiFi, GPRS, MMS, etc intact... I've proven this in the past.
Best regards,
Rayan
So far with Custel 1.0/2.0 and XDA live 1.1/1.2 Inesoft Address Book Caller ID becomes disabled, and the entire program becomes essentially useless after installing and soft resetting. Any reason the roms are suppressing this program? Fixes?
Is it a compatibility issue or a simple registry fix?
marscandybars said:
So far with Custel 1.0/2.0 and XDA live 1.1/1.2 Inesoft Address Book Caller ID becomes disabled, and the entire program becomes essentially useless after installing and soft resetting. Any reason the roms are suppressing this program? Fixes?
Is it a compatibility issue or a simple registry fix?
Click to expand...
Click to collapse
Its running fine on Dutty's latest verison
Try 2.0 since it is the latest version. It's free if you bought after July 2006.
I am using 2.0. And I even tried the 2.1 Beta.
Its odd, I put the original ATT Tilt Rom back on it, and it just keeps getting disabled. Is there any fix?
I even tried a hard reset and installing Inesoft Address Book 2.0 by itself then resetting. Then it just gets disabled and my bottom launch tray disappears.
taiseer999 said:
Its running fine on Dutty's latest verison
Click to expand...
Click to collapse
I just tried it on Dutty's Version. After 2 soft resets it just completely stopped working! How can i fix this
First, let's verify it is the address book. I have been usin git for along tie and it works FINE. I have read reports that there is a hacked version (warez) floating around that the caller ID does not work.
I'd contact Inesoft directly for support.
I have contacted Inesoft. Still awaiting a response. I've only had this problem with the Tilt/Kaiser. It worked fine until doing some soft resets and then PRESTO it was gone. And yes I am using a legit version.
It seems as if my bottom launch tray (where the small inesoft address book icon is) gets completely disabled, and consequently disables inesoft. The program doesn't disappear right away. It disappears probably over an entire day after multiple soft resets.
So, just to clarify....
It works find after a soft reset, but after an entire days of multiple soft resets it does not work?
After 1 soft reset it still works?
After 2 soft resets it still works?
But after 3-4-5 it dosent work any more?
Everything else works after these resets? Like it being the default contacts; or the default history manager, etc?
I have the issue happenning with Dutys Rom#5. Caller ID doesn't stay enabled and every so often the address book comes up blank. I use it for the address book shortcuts.
-McMex
grizzley said:
So, just to clarify....
It works find after a soft reset, but after an entire days of multiple soft resets it does not work?
After 1 soft reset it still works?
After 2 soft resets it still works?
But after 3-4-5 it dosent work any more?
Everything else works after these resets? Like it being the default contacts; or the default history manager, etc?
Click to expand...
Click to collapse
There is no "exact" amount of resets but eventually it just completely gets shut out. The only thing it can do after it shuts down is just edit my contacts and add photos to names etc. But as for Caller ID and Call history functions etc, it just keeps getting disabled no matter how many times i try to re-enable it.
xda live 1.2
Works fine on xda live 1.2...actually have used it on all variants of xda live.
Help Help Help
Does anyone know how to change the skin of the contacts menu in inesoft address book?!? I have posted so many questions on different blogs and haven't gotten one answer. I would love to change th eugly blue to like black or something...I would like to customize it and have no idea how Please if anyone knows how to do this HELP!!!
Hi,
I might have done a stupid thing... I was quite bummed out that ActiveSync was starting by itself all the time on my Touch Pro.
So I used one of the solutions - which was disabling notifications of repllog.exe by using FdcSoft TaskMgr (http://forum.xda-developers.com/showpost.php?p=2577786&postcount=18).
This solution seemed OK until I realised that I can't sync with my laptop anymore. The AS connection is never established :-(
Of course, I tried to revert the settings and enabled the notification of repllog.exe again but it has no effect on it anymore (did a soft reset afterwards).
Is there a way how to reset Active sync to its default settings?
Thanks for the answers in advance.
PS: I also tried the other solution for disabling Activesync starting but it didn't help at all
(http://pdaphonehome.com/forums/ppc-6700-xv6700/60676-how-stop-activesync-turning-automatically.html)
I reverted those changes as well...
same problem here. :
Hi all,
I have got a really weird problem. Some application, such as QuickGPS, Youtube (Google's app), SPB TV, Windows Live Messenger Mobile can't access the network. Some other apps are not affected, such as Internet Explorer, Opera 8.65.
I don't want to reinstall everything since it takes quite long. I think I probably modified registry or installed some stuff and that has caused the problem. I can't figure out what I have done wrong.
Any ideas?
wifi ?
gprs ?
I would look how the settings were set in settings->connections-Connections-advanced-select network
and try changing them
Wifi and Activesync, Windows Mobile 6.1. The top box in that tab is set to the Internet, the bottom box is set to the work network. I tried to change them, it didn't help. Now Google Map doesn't work neither.
It says:
Error: wininetHTTPError [0 2]
A soft-reset does solve the problem, but I have to reinstall all my apps...I am very reluctant to do that.
fangfufu said:
A soft-reset does solve the problem, but I have to reinstall all my apps...I am very reluctant to do that.
Click to expand...
Click to collapse
Soft-reset does not delete any installation. I've done many times. But you probably meant to say hard-reset instead!
wovens said:
Soft-reset does not delete any installation. I've done many times. But you probably meant to say hard-reset instead!
Click to expand...
Click to collapse
Sorry that's what I meant. I think I am going to go for a hard reset later on, if nobody finds a solution.
Hi,
I just installed the latest Artemis (58.0 SVE) to my HD2. I used the LeoAdvancedRUU.exe and have not done any customizations. Note sure of my Radio version.
Everything went fine. But my company enforces the use of Exchange company principle unit cryptation (direct translation from Swedish, not sure of the correct english term), and after a while (30 minutes) of using the phone and having done some settings in the standard HTC settings tab I did a soft reset. Problem is that the phone freezes on the lock up screen. I can push the Speak button to make emergency calls, but when clicking Lock up the phone just freezes.
I had done a soft reset before, which worked.
Could anyone help? (currently I can't even start the phone...)
I'm not so sure it has anything to do with the Exchange encryption.
I cleared the phone and got it running with Artemis 58. I synched with Exchange and everything was running fine for some hours, during which i did several soft resets.
However when I did some simple settings on the HTC settings tab (I changed background image and moved around and hid some of the tabs on the start screen), the phone wouldn't restart when soft resetting. It just freezes when I try to unlock it on the security encryption screen.
Ideas anyone?