Reset ActiveSync to default settings - Touch Pro, Fuze General

Hi,
I might have done a stupid thing... I was quite bummed out that ActiveSync was starting by itself all the time on my Touch Pro.
So I used one of the solutions - which was disabling notifications of repllog.exe by using FdcSoft TaskMgr (http://forum.xda-developers.com/showpost.php?p=2577786&postcount=18).
This solution seemed OK until I realised that I can't sync with my laptop anymore. The AS connection is never established :-(
Of course, I tried to revert the settings and enabled the notification of repllog.exe again but it has no effect on it anymore (did a soft reset afterwards).
Is there a way how to reset Active sync to its default settings?
Thanks for the answers in advance.
PS: I also tried the other solution for disabling Activesync starting but it didn't help at all
(http://pdaphonehome.com/forums/ppc-6700-xv6700/60676-how-stop-activesync-turning-automatically.html)
I reverted those changes as well...

same problem here. :

Related

Activesync acting up - Guest account only

For some reason this problem keeps coming back..
When I go to Activesync on my 750 it shows a different screen that says "To sync with a desktop computer, install ActiveSync on your computer and then connect this device."
When I plug in via USB or to go Menu/Connect via Bluetooth it starts to connect (open ports, establish connection, etc) but the desktop pops up a warning that says "Synchronization cannot be completed successfully..."
This appears AFTER I have already synced the device once or twice and the profile already exists on my desktop.
This happens regardless of syncing with bluetooth (which used to work) or with USB (which also used to work).
I reinstalled ActiveSync 4.5 on the desktop. The original profile was wiped away, and I was able to sync with the device again.
Now the problem came back..!
Any idea what this is? It seems like a device issue because I can never get to that normal "spinning arrows" screen on the device, only this warning screen.
Your help is appreciated!
- soft reset, no help
- reinstall activesync on desktop, no help
ok got it... deleted the profile on the desktop (disconnect device, on desktop go to File/Delete Mobile Device)... soft reset device... reconnect device to desktop...
how do i delete the profile from the device, i think that is corrupt? keeps doing the same thing.
Can you try to go to settings/connections/USBtoPC & disable advanced network functionality?
"synchronization could not be completed"
sorry, wrong thread, can't seem to remove
Update: Okay so I know how to fix the problem (delete profile from desktop, soft reset device, connect via USB)... but the problem keeps coming back.
It seems like the profile keeps getting "lost" on the Treo because that screen that I mentioned (without the spinning arrows) keeps coming back and it should only appear when there are no profiles on the device.. am I right?
Also seems like I am the only one experiencing this issue, I guess.
not the only one ive been trying for days to fix this issue and now my phone hard reset itself and wiped all my contacts/appointments etc. hmmm....... did you have a happy ending?
ActiveSync is not finding my profile?
"I know that this is an old thread" and I am bumping it anyway.
I am now having the same issue a HTC touch pro.
I cannot seem to find an actual solution to this problem, having to delete my profile every two days is not what I would call "a solution".
I cannot seem to find anyone that can help me on this issue, nor can I find the thread is it seemed to address this with a solution - only more questions.
If anyone could help me out here it would be much appreciated, thank you.
my symptoms:
contacts, appointments, notes and tasks are all missing from my phone.
Upon connecting ActiveSync, computer and phone both believe that synchronisation has occurred perfectly. In hindsight I am wondering if it has got something to do with the phone creating a new, blank profile in synchronising with that?
We in you try to change the settings so that it will synchronise them again, all of those checkboxes are locked so that they cannot be selected, almost like you are in the wrong profile and outlook is preventing you from syncing with a profile.
The only "solution" that I have discovered to this thus far is to delete all of my Outlook profiles, and then begin from scratch again

Qtek 9100 - reminder doesn't notify anymore

Hi
A couple of days ago I realized that my Qtek 9100 no longer processed my reminders. My phone don't any longer play a sound and pop up a window at the time/date a reminder is due.
I checked the settings and everything is set correctly. Then I reset the Qtek and it still didn't go back to work normally. The last step was to switch it off, remove the battery and switch it on again. That did the trick, everything went back to normal, however only for a time. Next day same situation, reminders do not process. Again switch off, etc., and again it returned to working normally and again until some time....
I don't know if and what program I might have installed, and I surely don't know what causes this malfunction nor how to get rid of it.
Anyone out there who could give me a hand on solving this problem?
cheers...
May users have notification problems (in WM5 and WM6 devices). Search forum and you'll find FAQ about NQ and reminders problem.
My experiences: since I use pmClean (free) and SKTools (commercial) everyday my notifications and reminders work without any bugs for more then 2 months. Both applications have scheduling then you don't have to run them manually.
I don't synchronize my Artemis with Outlook on PC, maybe it's useful too.
Good luck.
PS. You could try Check Notifications, but for check only (suspicious notifications are in red color), don't use it's clean feature or you could have NQ cleaned too much
Hi
Thanks for you help. I installed the pmClean and the notifications came back after cleaning. However the next day again they were blocked again. May I ask you how you configured your pmClean? Do you run it automatically? If so, one or more days per week? Do you let it execute a soft reset after cleaning?
ceers
fbraun said:
Hi
\May I ask you how you configured your pmClean? Do you run it automatically? If so, one or more days per week? Do you let it execute a soft reset after cleaning?
Click to expand...
Click to collapse
Actually I use 2 programs now - pmClean runs one a day (auto, with no reset) and SKTools - once a day too.
Hi.... I installed pmClean and even purchased SKTools.... but every day I realize that the reminders don't work. I have the pmClean programmed to run every day at 06:00... doesn't help. The reminders seem to works however always after I did a reset. However it looks that inbetween the next day something happens and the reminders again won't work. Any idea on what I could do? Is there anymore server reset like uninstalling all programs but mobile 5 itself and re-install everything?
cheers
Try not to synchronize with PC and see it it'll help. You may also use WakeUp Tweak to make every night cleanup longer.
I know WM5 and WM6 bugs in NQ are very annoying and MS ignores our prayers for years... I always think about new Android from Google when it happens to me
You may also read this:
http://forum.xda-developers.com/showthread.php?t=333521
and this: http://discuss.pocketnow.com/showthread.php?t=19884
Good luck.
Hi
guess I finally figured out what caused the problem. It's not the Qtek 9100 but the ActiveSync application. I suspected this yesterday after reading some comments. So I decided to not connect my phone to my note which always triggered the ActiveSync to load. And since my last cleanup and soft reset yesterday all reminders worked. The WM5 sync at midnight didn't do any harm. Now the question is how can I fix ActiveSync? At least I'd like to be able to install programs on my Qtek which always comes with a sync. Any idea? Or do I simply have to always run pmClean followed by a soft reset after having my Qtek being connected?
fbraun said:
Hi
At least I'd like to be able to install programs on my Qtek which always comes with a sync. Any idea?
Click to expand...
Click to collapse
You still can install programs without Activesync partnership (your device is seen as Guest).

Active Sync error code 8018001

well it seems that i have run into a HUGE problem. whenever i try to sync my ppc with my pc active sync says "Synchronization could not be completed. Try again later. Support Code:80180001"
when i try to sync it later, it still gets the same message. i've searched google and xda-devs, along with some other sites, but found no answer. if someone can help me i'd appreciate it very much.
try the following in the follow order, with a sync attempt in between each one
soft reset
uninstall/reinstall activesync
hard reset
thanks fzzyrn, the only thing that worked was the hard reset though, but thanks for the advice all the same.
Facing problem sync with my outlook..
Exchange ActiveSync has encountered an error. Support code:80180001
)
Error 80180001 Syncs Notes but nothing else
My BA (Qtek 9090) can connect via activesync but will only sync "Notes" and "Favorites" but nothing else.
I can also "Explore" the device when connected and transfer files without problems.
I tried changing all the obvious, tried soft reset, hard reset and reinstallation of OS (WM 6.5). Nothing helps.
Win XP Pro, ActiveSync 4.5, WM 6.5
Active Sync error code 8018001 FIX
I'm also getting the same error, I installed Swampy395 WIN Mobile Pro 6.5 Beta 1 and everything seems to work well, except for this issue. At ETEN a Vietnamese forum: QUOTE(stevenlamhkhk @ May 16 2008, 03:39 PM) New ROM FOR X500 V07 - PhamQuang
http://www.pdaviet.net/showthread.php?t=25963 at this thread said they solved the issue by removing the ETEN GPRS wizard. Unfortunatly I don't know how to do that. Is there a Blue Angel cooking wizard that can do this for us? It seems to be happening to several of us. Thanks for any help on the issue.
Hi,
same error with Toshiba G810, WM6.5, AS4.5 & WXP SP3...
With an older 6.5 ROM, I hadn't problems at all.
Of course, I doesn't have any ETEN GPRS Wizard, only Autoconfig utility to configure GPRS.
Thanks!
FIXED
Not sure if this will work for others, maybe it will stop some people from hard resetting.
I was getting this error and had already tried
Soft Reset
Reinstall Active Sync
Hard Reset
However the problem was still there. So I started thinking about my machines changes, and the 1 thing that maybe important, is that I upgraded from outlook 2003 to outlook 2007. So the last thing I did to get my phone syncing again, was
Uninstalled Active Sync
Uninstalled Outlook 2007
Rebooted
Installed Outlook 2003
Rebooted
Installed Active Sync
Rebooted
Synced Phone, every thing worked perfectly.
Hope this helps someone. Added it here as its number 1 on google for 'activesync support code 800100'

Lost exchange settings in active sync after soft reset

Hi
I'm using a Touch HD with some custom ROM wm6.5.
After each soft reset my exchange settings (I mean what should be synchronised: mails, calendars, etc) are lost (unchecked). I have to enable it again sync and all will be working till next SR.. Unfortunately Author of ROM doesn't have idea where to look for the issue, so maybe you will have some hints?
Than you in advance and kind regards
Same problem
I have same problem. I cant find any solution for now
I have the same problems on my HD with to different recent 6.5.3 ROMs . After SR, all items are unchecked and all the contacts and calendar data are gone. On the other hand, if I perform regular shutdown and power on sequence, nothing is lost... But, with WinMo, SR is necessary from time to time.

ActiveSync-intermittent

ActiveSync - intermittent problem with "retrieving settings"​
I have this problem now on my Touch Pro. I have also had it on my Kaiser. This is an intermittent problem where - occasionally and unpredictably - when I connect my phone to my pc, I get an error when the pc attempts to "retrieve settings" from my pocket pc. It fails to do so, and then only allows me to access files on the PPC, no syncing possible after I go through a setup screen.
The fix for this is simple but time consuming: On the PPC I do menu -> options and then delete the device (pairing) there. On the PC, I remove Activesync and reinstall it. When both of these are completed, I reconnect everything up, go through the setup screens and all is well. Until it happend again.
I am using AS 4.5 on a PC with XP. My PPC uses 6.1 (The Kaiser was 6.0). I will also add that I have LOTS to sync in outlook:
400 contacts
7000 Agenda entries
100 Todos
20 notes
I have - actually over the last 2 years! - searched for a solution, I have searched these pages, googled, etc, etc. I see lots of people have more permanent problems with activesync connectivity, but my problem is different: I could be fine for about a month and then have a problem for no apparent reason.
Can anyone help? Does anyone know what happens when the activesync program on the pc says "retrieving settings"? Is it looking in the PPC registry or at a file used for activesyncing (e.g \pim.vol - mine is over 19MB)?
I am happy to go poking around in either devices registry, and will look at all suggestions.
I would
uninstall activesync
and go to regedit and remove everything related to activesync
reinstall it sync everything
hardreset the pda
and sync it again so it get all data from outlook that would
fix the pim being that big
Rudegar said:
I would
uninstall activesync
and go to regedit and remove everything related to activesync
reinstall it sync everything
hardreset the pda
and sync it again so it get all data from outlook that would
fix the pim being that big
Click to expand...
Click to collapse
Thanks for the response. Unfortunately, in the past I have also manually deleted the pim file - without sucess.
I would guess the problem is down to the volume of data I'm syncing and that something is just getting confused occasionally. If this is the pim file then the only solution is my own rather brutal one. But maybe its just a control file or registry setting gone bad - any ideas?
I have effectively done a hard reset with my move to a touch pro and, in any case, don't want to spend days reinstalling everything !
Oh, and some final thoughts:
o This happened more often on the Kaiser - possibly due to its much slower USB speeds?
o Every time it happens I loose all my speed dials in my phone- aaarrrggghh!
Anyone have "insider knowledge" of what's going on?

Categories

Resources