Database Info

Can'tinstall ROM on my Jam....

Hi all!
I've an Italian version on i-mate Jam and I'd like to install the last English version of the ROM.
I'm trying with the wwe (worldwide English) ROM but seems to doesn't work with my device...
S.O.S!!! Smile

Hello
There are numerous posts on this problem.
Quick extract on the matter from JoelWu as you may get Error 150 Codes
1. Right click on the downloaded Rom EXE-file and extract to a named folder (using Winzip or something similiar)
2. You should end up with about 6 - 8 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and maupgradeut, the maupgradeut is the file that runs the upgrade
3. Download the MaUpgradeUt_noID.exe
4. Once you have this file you will need to add this to the folder created above as this is the file needed to initiate the upgrade.
5. In ActiveSync, go to option -> Schedule, Set it to Manual, this is to make the PPC USB connection to ActiveSync active but don't do any Sync with your PC and PPC during the upgrade process.
6. Connect the phone to the USB, manually sync once. From now onwards, the step is the same.
-----
7. Now run the MaUpgradeUt_noID.exe
8. The upgrade Wizard will start, go through a few checks then eventually come up with the country Id error.
9. Run the MaUpgradeUt_noID.exe file again and this time it should allow you to run the Wizard.
10. The process should then go through 3 stages which should last about 10 - 15 minutes.
11. When finished you should get the upgrade successful notification and a prompt to reset the device
12. In ActiveSync, click on file and connection settings and tick the USB connection.

Many thanks!
I'll try it asap!
Last questions:
if I install the WWE ROM as you told me... the next ROM upgrade it will be possible by the normal exe way or all the WWE ROM need that workaround?
If I install the WWE ROM using the way you told me... Can I came back to install the Italian version of the ROM? Using the normal way (.exe) or... ?

I dont no.. im trying 2 update my Magician for the second time i will post my result first i try with official .exe. if it dont works i use the cracked...

Nope still Country ID error

Thanks!
IT WORKS!!!! :wink:
well... now I've got English ROM on my jam but 2 problems:
- On my old Italian ROM there was an antivirus application installed as default. On English ROM there isn't!!! :-(
Any suggestion to download the antivirus? Is it necessary in your opinion?
- Now, when I'm typing with the std keyboard the Jam suggest me the English words... (obviusly!)
Can I configure the Jam to sugget me the Italian words or the WWE have only English vocabolary inside?
- Wat's the differences fro WWE ROM and US ROM or UK ROM? I'm Italian... waht's the best English ROM for me?

WWE is fine for you. The US and UK roms only have settings for that countries' phone providers in the Extended Rom. Since you're not in either of those countries you can just stick with WWE.

Qtek 9000 Help

I need help to upgrade qtek 9000. I had bought this pda three days ago. There is installed the german version of windows mobile 5.0 . How can i change the rom to have a english version? Cause i try to use the JasJAr WWE 11353 version of the Rom, but the program stop itself and write that the version of the rom is not correct. Where i can found the correct version for my qtek? Many thanks

Country id error
The software told me that there is a country id error 120 . Anyone can tell me how can do about it? Thank you

Try this ROM:
ftp://xda:[email protected] ROMs/UNI_Qtek_WWE_11364_151_10300_Ship.exe

Rom didn't work
I'm sorry. This is the procedure that i have follow:
1. Download the qtek rom
2. Unpack in a directory
3. Substitute upgrade.exe with NO_upgrade...
4. The utily start correct
5. The screen of qtek become black
6. Windows pop-up a "modem usb installation"
7. The update program say: country id error 120
That's all. Please help me!

Help: Cannot use software that require .net compact 2.0

I've install .net compact framework 2.0 in my XDA neo (lastest WM5 Dopod ROM AKU2.0).
Once, I install the program that require the .net, it cannot be open and have an error message like this:
An unexpected error has ocuured in
xxxxxx.exe
Select Quit and then restart this
program, or select details for more
information.
But, when I boot in safemode (by SPB pocketplus plugin) I can open that program correctly without any error!!!
It cannot be used in normal mode but it can be in safemode.
I've tried both install the .net in SD card or in Device, but the results are the same.
Could anyone help me? What's wrong on my device or anybody have the same problem like me?
Thanks in advance, guy.

First, it would help if you click 'details' and tell us what you see.
From what you wrote it is clear that the problem is not with CF 2 but with the particular app conflicting with one of the programs your device runs on start up.
What kind of plugins / utilities do you have that run in background? Try removing them one by one to see where the problem lies.
Also if you have a backup of your data, try hard resetting then installing on a clean device.

detail of error are:
A6.Times.exe
PlatformNotSupportedException
at
System.Globalization.CompareInfo..ctor(
)
at
System.Globalization.CompareInfo.GetC
ompareInfo()
at
System.Globalization.CultureInfo.get_Co
mpareInfo()
at
System.Globalization.CultureInfo.GetHas
hCode()
at
System.Collection.Hashtable.GetHash()
at
System.Collection.Hashtable.InitHash()
at
System.Collection.Hashtable.get_Item(
)
at
System.Resources.ResourceManager.Int
ernalGetResourceSet()
at
System.Resources.ResourceManager.Ge
tObject()
at
System.Resources.ResourceManager.Ge
tObject()
at
A6.Books.BookNavigatorControl.Initialize
omponent()
at
A6.Books.BookNavigatorControl..ctor()
at
A6.Books.BookControl.InitializeCompone
nt()
at A6.Books.BookControl..ctor()
at A6.Times.NewspaperControl..ctor()
at
A6.Times.NewspaperForm.InitializComp
onent()
About HR, I plan to do it again this weekend. And I will install .net CF first then this program and test, and I will install each program after and test one by one. But, if it possible I want to know what's a problem before I do that.
Thanks guy for recommending.

What language is your device in?
This error sometimes occurs on regional settings that are not originally supported by the device.
Try changing you regional settings to English and see if it goes away.

if i wan to view chinese leh?
coz if i din change the region to chinese,
when i play chinese file name in coreplayer.. it will show @*&#$#...

Moto Q9h, European Edition Windows Mobile 6.1, Arabic Support

I am not sure if this is the way to post this fix, but I would like to share this simple but possibly hard to come by fix.
As anyone with a Motorola Q9H is aware, there is a European Windows Mobile 6.1 edition around on the Internet that has support for Italian, German, and English, (version: SHIP_NORMAN_AP_U_01_10_05R_MODEM4_U_40_11_40R_12_U), which you can download from www.maximus.ws or other sources.
The problem with this ROM is there is no Arabic support, however there is a fix, involving the following: Downloading a modified version of the segoa condensed font, the "MOBiDIV Multilingual Support 3.0" cab which supports Arabic viewing but no writing.
I will upload these in a separate post. You will also need Total Commander for Smartphone edition. Here is what you need to do:
1. Install Total Commander on the Q9h and then find these two fonts in your Windows folder (after installing the WM 6.1 ROM): segoe.ttf, segoeb.ttf.
2. Using Total Commander, select both files and then remove the READ ONLY attributes.
3. Using ActiveSync or total Commander upload the modded versions of segoe.ttf, segoeb.ttf that support Arabic to replace the versions inside the Windows folder.
4. Check they have been replaced by checking the timestamp of the two files.
5. Install "MOBiDIV Multilingual Support 3.0" cab from your memory card of device memory.
6. Reboot the device.
You should now have support for reading Arabic SMS and Arabic E-mail and Arabic in other applications. This workaround will NOT provide Arabic data entry, meaning you cannot type Arabic in e-mail or SMS or other applications.
I have tested this on a European edition Motorola Q9H (no WiFi or GPS). It could work for an AT & T version as well, but have no way to confirm this since I do not have the said device.
Ahmed

Uploaded files?
Hello, can you please upload those files? I have a Samsung c6625 with WM6.1 Standard and I would love to be able to read Arabic on it.
Thank you.

q9
Hi how can I get MOBiDIV Multilingual Support 3.0 for q9h

Q9h Arabic support help is needed
Hi ahmedibnaser
I tried the method you mentioned.
I manged to upgrade the firmware from 6 to 6.1.
also i managed to change the fonts in windows directory.
but i could not get the multilanguage support program to work.
the problem i have is when installing the file i get a white screen with CIT EULA on top with nothing to press or do.
your help will be appreciated.
BR

usiala said:
Hi ahmedibnaser
I tried the method you mentioned.
I manged to upgrade the firmware from 6 to 6.1.
also i managed to change the fonts in windows directory.
but i could not get the multilanguage support program to work.
the problem i have is when installing the file i get a white screen with CIT EULA on top with nothing to press or do.
your help will be appreciated.
BR
Click to expand...
Click to collapse
Undo the font changes, and uninstall the Arabic support, then install my smartphone arabizer, here http://forum.xda-developers.com/showthread.php?t=535108.
Also make sure ur phone is App unlocked.
Btw where did u get the 6.1 ROM from?

Need urdu fonts for windows mobile 6.5
Need urdu fonts for windows mobile 6.5

[Q] run version and language .xap on att branded titan locked phone?

Hello all and sorry for the noob question, I'm a bit embarrassed as I'm usually a pretty good investigator. I had a fully unlocked focus and loved 8107. Now I have a Titan and want to update to 8107 but can't figure out how to run the version and language .xap so I can not "Walsh" my phone. Can anyone help me out, I would greatly appreciate it. Do all att branded titans have the same language packs installed?

irvin792 said:
Hello all and sorry for the noob question, I'm a bit embarrassed as I'm usually a pretty good investigator. I had a fully unlocked focus and loved 8107. Now I have a Titan and want to update to 8107 but can't figure out how to run the version and language .xap so I can not "Walsh" my phone. Can anyone help me out, I would greatly appreciate it. Do all att branded titans have the same language packs installed?
Click to expand...
Click to collapse
To check without side loading anything go to 'Settings' -> 'region+language' -> 'Display language' The languages listed there are all the ones you need to load with the CAB sending tool.

Thank you

hello, i have an AT&T titan and also don't know how to run the .xap file, i tried using the QR code but the phone says "cant download this file, windows phone doesn't support this file type
i tried to add Spanish to change the display language and already upgraded the version from 7020 to 8107 with the English and Spanish language packs, everything is working but i still cant change the display language don't know why
i used this guide to do it http://forum.xda-developers.com/showthread.php?t=1306415
I'll upload a picture of the files i used to do the upgrade, don't know why display language section is still only in English
can someone help me please

elarki said:
hello, i have an AT&T titan and also don't know how to run the .xap file, i tried using the QR code but the phone says "cant download this file, windows phone doesn't support this file type
i tried to add Spanish to change the display language and already upgraded the version from 7020 to 8107 with the English and Spanish language packs, everything is working but i still cant change the display language don't know why
i used this guide to do it http://forum.xda-developers.com/showthread.php?t=1306415
I'll upload a picture of the files i used to do the upgrade, don't know why display language section is still only in English
can someone help me please
Click to expand...
Click to collapse
You can't add display languages that way. For that you need to install a custom ROM. Since you've got a Titan - there are ROMs available with full unlock and all languages.
Unrelated to that, you can only install .xap files on your phone in custom ROMs, too. Otherwise, if your phone is at least developer unlocked, you can use the Application Deployment tool from the Windows Phone SDK.