Database Info

Can'tinstall ROM on my Jam....

Hi all!
I've an Italian version on i-mate Jam and I'd like to install the last English version of the ROM.
I'm trying with the wwe (worldwide English) ROM but seems to doesn't work with my device...
S.O.S!!! Smile

Hello
There are numerous posts on this problem.
Quick extract on the matter from JoelWu as you may get Error 150 Codes
1. Right click on the downloaded Rom EXE-file and extract to a named folder (using Winzip or something similiar)
2. You should end up with about 6 - 8 individual files; ms.nb1, radio.nb1, nk.nb1 ruu.conf, ruu.dll, enterbl, getdevicedata and maupgradeut, the maupgradeut is the file that runs the upgrade
3. Download the MaUpgradeUt_noID.exe
4. Once you have this file you will need to add this to the folder created above as this is the file needed to initiate the upgrade.
5. In ActiveSync, go to option -> Schedule, Set it to Manual, this is to make the PPC USB connection to ActiveSync active but don't do any Sync with your PC and PPC during the upgrade process.
6. Connect the phone to the USB, manually sync once. From now onwards, the step is the same.
-----
7. Now run the MaUpgradeUt_noID.exe
8. The upgrade Wizard will start, go through a few checks then eventually come up with the country Id error.
9. Run the MaUpgradeUt_noID.exe file again and this time it should allow you to run the Wizard.
10. The process should then go through 3 stages which should last about 10 - 15 minutes.
11. When finished you should get the upgrade successful notification and a prompt to reset the device
12. In ActiveSync, click on file and connection settings and tick the USB connection.

Many thanks!
I'll try it asap!
Last questions:
if I install the WWE ROM as you told me... the next ROM upgrade it will be possible by the normal exe way or all the WWE ROM need that workaround?
If I install the WWE ROM using the way you told me... Can I came back to install the Italian version of the ROM? Using the normal way (.exe) or... ?

I dont no.. im trying 2 update my Magician for the second time i will post my result first i try with official .exe. if it dont works i use the cracked...

Nope still Country ID error

Thanks!
IT WORKS!!!! :wink:
well... now I've got English ROM on my jam but 2 problems:
- On my old Italian ROM there was an antivirus application installed as default. On English ROM there isn't!!! :-(
Any suggestion to download the antivirus? Is it necessary in your opinion?
- Now, when I'm typing with the std keyboard the Jam suggest me the English words... (obviusly!)
Can I configure the Jam to sugget me the Italian words or the WWE have only English vocabolary inside?
- Wat's the differences fro WWE ROM and US ROM or UK ROM? I'm Italian... waht's the best English ROM for me?

WWE is fine for you. The US and UK roms only have settings for that countries' phone providers in the Extended Rom. Since you're not in either of those countries you can just stick with WWE.

HELP on installing ROM

hi
I'm a newbie to PocketPC, I just bought an used PocketPC from my friend.
It's a T-mobile MDA Compact with O2 mini traditional chinese firmware. All the menu, everything is in chinese. The problem is...i can't really read chinese.
It maybe a dumb question! But i just wonder can any PPC experts here show me "Step by Step" how to flash it to an English ROM?
thanks everyone very very much!!
Cora. ^^

1. Download any Magician WWE ROM (latest is ver 1.13) and the file MaUpgradeUt_noID.exe from this board's ftp.
2. Extract the zip file and copy MaUpgradeUt_noID.exe to the same folder where you extracted the ROM.
3. Disable the USB connection in ActiveSync.
4. Put you MDA in bootloader mode (press power+camera+resest at the same time.
4. Plug in your MDA to the USB cable.
5. Double click on the file MaUpgradeUt_noID.

I have followed the steps... After run the "MaUpgradeUt_noID.exe", and click "NEXT"... then.. It says "Checking the information on your device... Please wait... " i have waited over 10mins, but still nothing happened. Wonder is there anything i have done wrong?? thx
Cora.

FINALLY... it's working!!
THX THX everyone!!
CORA.

What shall I do if on stage 2 it always stops on 24%....and nothing happens?

TYTN II - ROM Upgrade - Please help

Dear Friends ,
I have purchased a new HTC TYTN II unit and i have checked the HTC website and found that there is some ROM upgrade avialable(RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign _22.45.88.07_1.27.12.32R2_Ship
So i have downloaded that and tried to install it on my device. The installation was cool , it covered 100 % ,but at the end there was a error message on my PC " Error 270 -update error -image file corrupted " and my device continuously shows " KAIS130, SPL-1.93.0000,CPLD-8 " and there is 4 colour bars on the device.
I have tried the reinstallation - but no use , tried soft/hard reset - no use .
So kindly help me to solve the issue.
Regards,
Jerry
E Mail : [email protected]

Download the File again..
then got first to tricolor(fourcolor -screen) and then plug in the USB Cable.
Last start the ROM Update Utility and go through the assistent
But next time, please make a thread like this, in the Kaiser-Section (Kaiser = TyTN II)
AND PLEASE DON´T TAKE SOME COOKED ROM FROM OUT OF HERE!!! You First have to install HardSPL by POF!!!

need help to Upgrade wm5 to wm6

Hi PDA gurus,
I am a newbie dont know much about PDA phones,
I have Dopod 818Pro, and want to upgrade it to wm5 to wm6
Pls help me to upgrade it as i dont know,
I have checked the website also www.dopodasia.com, but its not working its showing the weird search page,
and my mobile get restart itself, when it has the battery 25% and dont get log on untill i put on charge
Thanks
Ankur

Hi there,
I would suggest you go hunt around in the forum as your queries has been repeated.
Maybe you would like to try these few steps. (Must have ActiveSync installed)
1. Search in this forum for roms (WM 6.0, WM 6.1, WM 6.5)
2. Download SOFTSPL (search in this forum)
3. Extract the files and put it to root of your phone (next to windows folder)
4. Run SPL.ink from your prophet (Using File Explorer)
5. Screen should turn white
6. Extract the files from the ROM package you downloaded at Step 1.
7. Run ROM update file.
8. Once done, phone will reboot and viola ~
9. A new OS is running in your prophet

Hi Sunset,
I have roamed around the other post also , but not be able to understand.
your 1st step : u r talking about the wm6 download (exe)
2nd step: what is SOFTSPL (need to download 1st in phone)
3rd: which root folder u r talking about
4th: where i can find the SPL.ink
6th: need to run the exe from i have downloaded in phn at step 1?
7th where i will find the ROM updated file
sorry , I dont have any idea of these things, Pls explain me it would be better for me and post a link for step1 and 2

http://forum.xda-developers.com/showthread.php?t=405384
the thread explains it quite well

The Wiki is your guide
Always try the wiki first and read two three times what the methods say and follow slowly that should help you on most of the things mate.

That still fails for Imate Jammin G3
I tried those steps for Imate Jammin G3
After the screen turns white, i run the G3 UPDATEEXE from the computer.
It fails as it couldnt connect.
When i remove and plug back the usb cable from the phone i hear the sound - which indicates the connecitivity.
I have to do soft reset to start the Windows Mobile again
Note : i am trying to Upgrade WM 5.0 to WM 6.1

axim x51v language change needed

hy all
i m new in this good forum
i have a dell axim x51v a04 spanich rom and i want to change the language to french but no way because the official upgrade wont let to do this because of differnt language
please help me

ftp://ftp.us.dell.com/utility/R115113.EXE
From the Dell FTP site, French, or did you already try this?
As i'm guessing you did, try this:
So I took a risk - I downloaded the A06 ROM update for ENGLISH and of course normally trying to run this package produces the error that my Axim was a different language and not allowing me to continue.
However, what I did was first download the French ROM updater package and take it to just before the stage where it is about to flash the ROM (sorry, can't remember exactly which screen this is but it would have definitely been after it does its check for language compatibility) and while the software is paused at this stage expecting user input to continue, rename and copy over using windows explorer on XP the actual A06 ENGLISH ROM file ie. make the English ROM file the same as the software is expecting the French one to be. Then go back to the flash updater and let it continue.

thanks for your replay
your trick seems to work but when the ppc reboot and enter flash mode, iget an error on my pc and wmdc close. i think that is due to my windows 7 x64 that is incompatible with dell system upgrade.
and if iwant to use the sd card te change the os language this will be easy?
thanks again