Hi,
when trying to update my radio for eugene373 32a mod for 32B, i did a mistype, i got an error then that no -p was set.
I then rebooted into fastboot and wanted to reflash, but all im getting is an error: info_singature chercking ...
remote: signature verify ckeck fail
I then tried to boot from hd, by trying fastboot boot recovery.img, it tells me that its ok, but then i just get a black screen. I searched a lot, but couldnt find any info, besides the goldcardtype for G1, but as i cant adb anymore, i cant get the cid of the sd card!
Any help is apprecialed:
My HW: HTC Sapphire 10000, 32B Vodafone Austria
Eng. SPL 1.33.004 Crios SPL
class6 4gb sd card
Thx
marvxxx
Related
When Press Camera and Power Button the Phone Boot into HTC Bootloader and Immediately flashes error File not Found.
HTC SPL in other HTC Device allow us flashing by following two way.
1. Flashing using RUU But this Require Boot Loader USB Driver Mode which is not I think Present in Dream G1
2. Putting Some nb into SDCard and flash it.
In tricolor boot screen it Shows the Following Text
Code:
DREA100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
Serial0
unlike other HTC Devices Here it don't show SPL but it show CPLD. I think This device will look for DREAIMG.nbh to flash it.
Can we find some other way to Dump whole ROM Image and reflash it using Proprietary method we have used before.
yes it looks for DREAIMG.NBH however the NBH seems to be a different format
the first sign i guessed that from was:
format a card as fat32 and place some random file renamed as dreaimg.nbh as *first* file on it, then see what error code it will give you, 78002. normal HTC SPL will give you 68002
anyway, you need a hboot.img before doing anything at all =)
I have Stock RC30 should i make any Random File as DREAIMG.nbh and try flasing it using my 1gb fat32 card ?
This Thread is somewhat redundant
http://forum.xda-developers.com/showthread.php?t=438072
but give DREAIMG.NBH another try i didn't check the headers
Hello All,
I've tried my hardest to search all over the forums but I still can't figure this out. I'm highlighting all I've tried to eliminate all that junk.
I have a 32A magic and I tried updating the ROM via this post.
I actually installed the radio 6.35.08.29 a little bit lower on the post using recovery mode while it was on my SD.
My device is rooted via theunlockr.com's one click rooting.
I think this was the problem because I was supposed to install the radio 6.35.10.18 because as soon as it was finished installing and rebooting, it keeps rebooting and doesn't even get past the splash screen
Here's where the issues start making me want to pull my hair out.
The good news (from what I'm hearing) is that I can still boot into fastboot and HBoot modes, but I can't get to restore mode at all
I'm getting better with the sdk so I'm understanding fastboot etc now but the main problem I believe is that it won't recognize my device.
I am on windows 7, but yes I've installed the latest drivers and device manager is recognizing it but when I try in cmnd to type adb devices it shows "List of devices attached" and it's emtpy.
I try to type something like adb bugreport and it comes back "error: device not found"
So clearly it doesn't seem to be recognizing the device.
What I was trying to do what push another radio to the device or something but at this point I have no idea what I am to do, especially since I can't get to restore!! Grr!
Any ideas?
p.s.
I thought I'd mention that I think this may be because I didn't (and cannot) select USB debugging from the menu as I can't load the device...
May be bricked... Oh well lol
update
It's only going into fastboot mode when plugged in now.
kob123 said:
It's only going into fastboot mode when plugged in now.
Click to expand...
Click to collapse
fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img
fastboot flash hboot hboot-1.76.2007.img
fastboot flash recovery recovery-RA-hero-v1.5.2.img
fastboot erase system -w
fastboot reboot-bootloader
make sure those files are in your tools folder
Thanks,
The files recovery-RA-hero-v1.5.2, Radio_HTC_PVT_32A_6.35.10.18, as well as hboot-1.76.2007 are all in the tools folder.
For fastboot flash radio:
I keep getting:
sending 'radio' ... okay
writing 'radio' ... INFOsignature checking...
FAILED (remote: signature verify fail)
Same thing happens for flashing hboot and recovery as well...
fastboot erase system -w
fastboot reboot-bootloader
both work fine.
Like I said, thanks HUGE so far, but still not working...
im also having the very same problem i cant even flash the sappimg or anything i dont even get the recovery
sapphier pvt 32b ship s-on h
hboot-1.33.0009 (sapp30000)
cpld-10
radio-3.22.20.17
thats all i get please help
ok i got it check it this is what i did i put the engineering-spl-hboot 1.33.2005on to sdcard and rename to update...
then turn on to recovery holding home n power...
then when the triangle picture pops up press home & end call buttons again just press it no need to hold....
once done updating place sappimg.zip on to sdcard...
power on to hboot ...
phonewill load zip file.....
let it do its thing again after done reboot and you got it!!!!!!
i had a card adapter sou will need on let me know if it helped you out....also i formatted my sdcard before i started because phone had problems mounting card when in recovery
http://forum.xda-developers.com/showthread.php?t=530527
download the update.zip
fastboot boot recovery-RA-sapphire-v1.5.2.img
(make sure you use sapphire unless you have the hero radio and spl installed otherwise the hero recovery is needed if you have the cursorsense radio which effectivly makes the magic a hero)
apply the update.zip
then you should be able to fastboot the prev instructions
just fyi make sure u check your radio on the fastboot screen before using the hero or sapphire recovery - make sure you use the proper one!
update
Hey all my problem was also with the spl as well for some reason. I also loaded the newest rogers update instead which the combination did the trick...
kob123 said:
Hey all my problem was also with the spl as well for some reason. I also loaded the newest rogers update instead which the combination did the trick...
Click to expand...
Click to collapse
yeaaa the spl is what my above tricck woulda fixed but if you loaded the latest rogers update you got no root access for now which kinda sucks
I updated the Radio on my 32a then I went to Fastboot mode to load the hboot image and discovered that i get a (failed : remote not allowed) message everytime I try to flash anything. So I guess I need a goldcard the only problem is I can't boot up to reformat the SD and make a goldcard...
Any idea's??
I'm lost!!
Can someone make a Goldcard for me, on another phone? I don't know what to do,
Thanks in advance...
anyone???
I'll pay for a goldcard if someone sends me one, assuming I can use one made on another phone in my phone. I need a way to get past my Fastboot mode and I can't boot to recovery or get anywhere else... to make a Goldcard
HELP?!?!
i used my memory card that came with my phone to create a gold card and it worked perfectly well just make sure you follow the guide to the letter.
you cant use one from another phone as you have to get the CID from your phone which is unique from phone to phone.
i believe what you should of done was flash the image first then update the radio but just search the forums theres bound to be someone with the same problem or even a google search might help
icow said:
i used my memory card that came with my phone to create a gold card and it worked perfectly well just make sure you follow the guide to the letter.
you cant use one from another phone as you have to get the CID from your phone which is unique from phone to phone.
i believe what you should of done was flash the image first then update the radio but just search the forums theres bound to be someone with the same problem or even a google search might help
Click to expand...
Click to collapse
But I can't use my phone to make a Goldcard because I can't get it booted up to a point where i can use adb shell. Only Fastboot
use a card reader. if you don't have one, go buy one, they are very useful to have lying around...
hi
please please please my phone is completely dead can i use the blue led mode ?? or the gold card to revive it and use fastboot again????
march83 said:
use a card reader. if you don't have one, go buy one, they are very useful to have lying around...
Click to expand...
Click to collapse
How does a card reader help me get the cid number off the phone? Don't i still need to get to adb mode to do that? which means booting the phone up which it won't do...
What's your HBOOT version? I got that while upgrading my RADIO. All I had to do was install an engineering SPL first. Then I was able to flash the new SPL.
you need to post more info. what radio did u upgrade to and whats your spl/hboot? Also, what recovery did u use?
I also noticed you saying something about the blueLED, I thought you could still get into fastboot...
can you still get into fastboot? I'm confused, cause you went from being able to go into fastboot and then now it's completely dead?
current set up
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT - 1.33.0010
CPLD-12
RADIO-6.35.00.29 (was 3.22.20.17 before update)
June 2 2009, 17:28:28
I the current recovery is RA-magic-v1.2.3H and I was trying to upgrade to RA-hero-v1.6.2 and Hboot 1.76.2007.
I got the radio upgraded but when I go to Fastboot to flash the hboot i get the (Failure: remote not allowed) error. So I can't change anything with the current hboot. I'm guessing I need a goldcard since I can't get to recovery mode, but every set of instructions for making a Goldcard requires the phone to be in adb shell mode which i can't get too.
At this point i don't care if i get the new radio on or not I just want it working again. I was running the SuperD 1.9.3 ROM with the Old radio...
The Blue LED issue wasn't me, I dont know who that is or what that was about.. I CAN still get to fastboot
Um, is that an engineering SPL? I believe you need one before doing this.
Did you try flashing the old radio again? Also, how did you upgrade your radio? Did you use Fastboot or Recovery?
If you can't flash anything.. well I dunno what else to do, never seen this problem yet. Maybe someone else with some more knowledge can help you, but try searching. I'm sure you're not the only one who's been through this situation.
Give this a try, I have no idea if it works though.
(Read this off unlockr)
Download the Hero Recovery Image
Put it in your androidsdk/tools folder
in fastboot, type
fastboot boot NameOfRecoveryImage.img
The only way i know how to change the Radio back is to Flash it through fastboot and this is the message i get when flashing anything through fastboot:
FAILED <remote: not allow>
The first time i changed the Radio to the new one I did it through recovery mode
I can't make it in to recovery mode anymore...
help?...
If you flash an engineering SPL you'll be able to continue. Flash 1.33.2010 and then continue from there. That happened to me too.
If you can read:
Prerequisites:
- HTC Magic / Sapphire 32A
- Engineering SPL
----- 1.33.2005
----- 1.33.2009
----- 1.33.2010
----- If you boot into fastboot and have issues with "fastboot:remote not allow", then your SPL won't work. Upgrade to Engineering SPL before continuing.
----- If you do not have an Engineering SPL, download 1.33.2010 and flash through recovery before starting this procedure. Flash the SPL update.zip like any other update.zip file.
- Working ADB/Fastboot Drivers
- Basic knowledge or modding your phone
Click to expand...
Click to collapse
This is the very top of the topic.
rquattro said:
If you flash an engineering SPL you'll be able to continue. Flash 1.33.2010 and then continue from there. That happened to me too.
If you can read:
This is the very top of the topic.
Click to expand...
Click to collapse
how do I flash it through recovery if I can't boot into recovery?
can your computer detect the device? can ADB detect it? Can you get into fastboot mode (Power+Back)? You could try to flash the engineer SPL (and the old radio) through command prompt:
Do it in this order:
Code:
fastboot flash radio Radio_HTC_PVT_32A_3.22.20.17.img
fastboot flash hboot hboot-1.33.2010.img
fastboot flash recovery recovery-RA-sapphire-v1.5.2H.img
fastboot erase system -w
fastboot reboot-bootloader
The files you'll need are all at this topic.
perhaps you missed the part about any fastboot command giving me a
FAILURE <remote: not allow> error
The one thing that gives me hope is that I get about 1-2 seconds of response from adb during boot up before it shuts down and starts the boot process again. If I knew how to run an update.zip from adb shell in one or two commmands maybe i have a chance at loading the old radio or engineering SPL or something. If I try to get to recovery mode it locks up after a second and I can't run the update through the menu...
??
fibofan said:
How does a card reader help me get the cid number off the phone? Don't i still need to get to adb mode to do that? which means booting the phone up which it won't do...
Click to expand...
Click to collapse
If you have fastboot, can't you fastboot boot recovery.img?
It's like a liveCD boot. Or maybe flash the old radio back on.
You did say you have fastboot, right?
HBoot mode?
fibofan said:
perhaps you missed the part about any fastboot command giving me a
FAILURE <remote: not allow> error
The one thing that gives me hope is that I get about 1-2 seconds of response from adb during boot up before it shuts down and starts the boot process again. If I knew how to run an update.zip from adb shell in one or two commmands maybe i have a chance at loading the old radio or engineering SPL or something. If I try to get to recovery mode it locks up after a second and I can't run the update through the menu...
Click to expand...
Click to collapse
Isn't there an HBoot mode that applies whatever is in an update.zip file? You may be able to recover your radio that way.
Windos or Lenox
i have bricked my mytouch the red screen of death VodaFone. i am trying the unbrick method (fastboot boot recover.img)
which some have said it works. would i have a better change of success on windows or lenox. cant
bricked mytouch1.0 with the new software 1.6 from htc gold card the vodafone sap.img because the usa was giving a version on device is older.
i was trying to change radio then spl looked like flash radio just fine went to the reboot then never came back from the vodafone screen.
cant fastboot and cant go to recovery
charging light just fine
Brick
ive came to the concluion that i did everything right it just bricked anyways. i think im going to send it to htc and see how much they will charge me
Hi
A friend gave me his htc magic because he crashed him.
he has already rooted his device
he put 2.1 rom and he decided to put another "fastest" and he crash his device
he told me that radio is bugged and his rom too.
I think with what i read on this forum that it's semi bricked because i can go to the Fastboot with pushing back and Power
When i put him on regulary i get Rogers screen then a Black screen.
What do you think about it ? bricked ? semi bricked ? Recoverable ?
here is a Video who show what happen when i press differents Buttoms
youtube.com/watch?v=MaSAh_8YK2E
Thanks
Need more exact details on which Magic it is. Can you read off the fastboot screen.
it's a 32A magic
The first version without jack 3.5
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.76.0010 (SAPP10000)
CPLD-10
RADIO - 6.35.10.18
jan 14 2010
Hboot
fast boot mode
sim lock
Fastboot
Hboot mode
Reset device
restart to hboot
Reset
Hrm... new radio.
Assuming he already rooted the device, but didn't have a working rom for the radio combination, try one of the "New Radio" roms for 32A and see if it works (Can you get into recovery?)
Like t his 32A Port of OpenEclair for New Radios
http://forum.xda-developers.com/showthread.php?t=640105
If you can't get into recovery you may need to flash the 1.6.2H recovery image from here:
http://forum.xda-developers.com/showthread.php?t=530492
and if you can't flash recovery (due to the SPL being Perfected) and you want to try something from scratch (you may have downgrade the new radio back to 3.xx via this link http://forum.xda-developers.com/showthread.php?t=605239 )
You can try something like Cyanogenmod with this 32A Wiki Guide. (Though I *Think* you'll need to get a Engineering SPL to get rid of any Perfecting)
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream/Magic32A_Firmware_to_CyanogenMod
ok thanks i'm gonna test =)
but now i have another probleme.
i cannot charge the htc magic don't know why ...
i try to solve that probleme to test to unbrick my phone
my problems seems to be Solve,
my battery is dead so i use my htc diamond battery.
can now test To unbrick the phone
And i had new from the old owner
he say me that
"The fastboot is Dead
Spl isn't good
Recovery is dead
And radio seem to don't work too"
hmm see i can't acces to the recovery mode how can i upgrade my radio ? ..
gluton said:
hmm see i can't acces to the recovery mode how can i upgrade my radio ? ..
Click to expand...
Click to collapse
You'll probably need to downgrade to an Engineering SPL for your phone if you are unable to do fastboot flash radio radio.img from the command line.
(I'd look more for you but I'm currently coding a website for a client).
i tryed to make the first part of http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream/Magic32A_Firmware_to_CyanogenMod
"if it says 'Remote Not Allow' or similar, your SPL may need to be changed"
They are exactly say that in the commands prompt so i need to flash my Spl i'm actualy trying =)
and i think that i have to make a Gold card to flash my spl
Edit
I tryed to Downgrade my SPL with a tutorial in my language
"http://swissdroid.wordpress.com/2010/02/23/32a-changer-le-spl-ou-le-radio-de-votre-magic/"
And i cannot flash anything they alway say "sending 'xxx' <xxkb>... FAILED (remote: Not allow)
Ans i don't know how i could make a goldcard with a bricked phone.
So What can i do ? ..
The "remote not allowed" means the SPL is perfected. Perfected means that it's "Locked".
You have to make a gold card:
http://theunlockr.com/2009/08/14/how-to-root-your-mytouch-3g/
Once you have a gold card then you download a new SPL and put it onto the card (read instructions from there):
http://forum.xda-developers.com/showthread.php?p=4332591
Engineerings SPL v1.33.2010
Once you have an Engineering (prefered) or non-perfected SPL you'll be able to flash what you need without the 'remote not allowed' message.
But I must warn you, make sure you read the instructions several times before doing anything and verify that its for your exact device.
Thanks for you Help Kbeezie
I've got a probleme
my phone is reconize when i type fastboot devices
but when i write adb devices , it's found nothing so i can't go to the next step : /
Does i need a non bricked magic to make a gold card ?
gluton said:
Thanks for you Help Kbeezie
I've got a probleme
my phone is reconize when i type fastboot devices
but when i write adb devices , it's found nothing so i can't go to the next step : /
Does i need a non bricked magic to make a gold card ?
Click to expand...
Click to collapse
You can't do adb from fastboot, only from the recovery. If you flashed a new SPL (Engineering) You need to then flash the appropriate recovery/radio/hboot, then when you turn off the phone you press and hold down Home + Power to get into Recovery mode, once there then you can do adb, or you can mount the USB and copy over an update.zip or rom file.
Kind of hoping someone with experience on the older Magic/MyTouch (32B) chimes in.
Okay
but i can't flash recovery so
i need flash my Spl and i can't flash normaly my spl 'not allowed"
so i need to make a goldcard and i need use Adb commands so how can i make goldcard ? i don't understand ..
gluton said:
Okay
but i can't flash recovery so
i need flash my Spl and i can't flash normaly my spl 'not allowed"
so i need to make a goldcard and i need use Adb commands so how can i make goldcard ? i don't understand ..
Click to expand...
Click to collapse
The new SPL is placed on the goldcard, then you do volume down + power in order to Hboot, doing so will cause it to update the SPL package. You don't flash an SPL with fastboot command .
yes but i can't make the goldcard for flashing my SPL because i need to make adb commands so what can i do ? ..
I'm sorry i really don't understand :$
It mean that my magic is dead ? ..
How did you write your fastboot info if you cant access fastboot mode? I cant believe that someone could memorize every detail, including the exact list of options.
Its just that that SPL is a perfected one...you could try re-flashing it by using a goldcard via fastboot. Or try running RUU.
gluton said:
It mean that my magic is dead ? ..
Click to expand...
Click to collapse
As long as you can enter fastboot mode, its not bricked.
i have acces to my fastboot mode
But i have probleme with creating the goldcard to flash the SPL.
In the step to create goldcard i need tu use ADb commands to get my CID but i can't use them.
So how could i get my CID ?
And Kbeezie Told me that it's because it's in recovery that we can use those commands.
So how can i make the goldcard ?
That what i don't understand :$
Thanks for the help everyone
Ok so here it is i have a mytouch 1.2 and in a sleep deprived stooper i was rooting my phone using the wrong guide (pre 1.2) doing so i got the sappimg file flashed went to boot it and got stuck at a htc magic boot screen with no ability to enter recovery nore will it boot. Frustrated i went back re read the guide DER top of the thread in bold red letters NOT FOR 1.2/Fender. GREAT so i reboot into fastboot mode try to unroot my phone with a original tmobile sappimg which is the only other sappimg ive been able to find that will even try to flash get to recovery and get a fail-pu error boot loader fail-pu then system hangs on unzipping, ive tried a ruu which got my invalid model id error and several different spl's im stuck ive been reading for the last three days and haven't found anything to cure it hoping someone can please help me figure this out if at all possible.
heres my info
SAPHIRE UNKOWN 32A ENG S-OFF H
HBOOT-1.33.2010 (SAPP31000)
CPLD-13
Radio-3.22.20.17