Related
Hello All,
I've tried my hardest to search all over the forums but I still can't figure this out. I'm highlighting all I've tried to eliminate all that junk.
I have a 32A magic and I tried updating the ROM via this post.
I actually installed the radio 6.35.08.29 a little bit lower on the post using recovery mode while it was on my SD.
My device is rooted via theunlockr.com's one click rooting.
I think this was the problem because I was supposed to install the radio 6.35.10.18 because as soon as it was finished installing and rebooting, it keeps rebooting and doesn't even get past the splash screen
Here's where the issues start making me want to pull my hair out.
The good news (from what I'm hearing) is that I can still boot into fastboot and HBoot modes, but I can't get to restore mode at all
I'm getting better with the sdk so I'm understanding fastboot etc now but the main problem I believe is that it won't recognize my device.
I am on windows 7, but yes I've installed the latest drivers and device manager is recognizing it but when I try in cmnd to type adb devices it shows "List of devices attached" and it's emtpy.
I try to type something like adb bugreport and it comes back "error: device not found"
So clearly it doesn't seem to be recognizing the device.
What I was trying to do what push another radio to the device or something but at this point I have no idea what I am to do, especially since I can't get to restore!! Grr!
Any ideas?
p.s.
I thought I'd mention that I think this may be because I didn't (and cannot) select USB debugging from the menu as I can't load the device...
May be bricked... Oh well lol
update
It's only going into fastboot mode when plugged in now.
kob123 said:
It's only going into fastboot mode when plugged in now.
Click to expand...
Click to collapse
fastboot flash radio Radio_HTC_PVT_32A_6.35.10.18.img
fastboot flash hboot hboot-1.76.2007.img
fastboot flash recovery recovery-RA-hero-v1.5.2.img
fastboot erase system -w
fastboot reboot-bootloader
make sure those files are in your tools folder
Thanks,
The files recovery-RA-hero-v1.5.2, Radio_HTC_PVT_32A_6.35.10.18, as well as hboot-1.76.2007 are all in the tools folder.
For fastboot flash radio:
I keep getting:
sending 'radio' ... okay
writing 'radio' ... INFOsignature checking...
FAILED (remote: signature verify fail)
Same thing happens for flashing hboot and recovery as well...
fastboot erase system -w
fastboot reboot-bootloader
both work fine.
Like I said, thanks HUGE so far, but still not working...
im also having the very same problem i cant even flash the sappimg or anything i dont even get the recovery
sapphier pvt 32b ship s-on h
hboot-1.33.0009 (sapp30000)
cpld-10
radio-3.22.20.17
thats all i get please help
ok i got it check it this is what i did i put the engineering-spl-hboot 1.33.2005on to sdcard and rename to update...
then turn on to recovery holding home n power...
then when the triangle picture pops up press home & end call buttons again just press it no need to hold....
once done updating place sappimg.zip on to sdcard...
power on to hboot ...
phonewill load zip file.....
let it do its thing again after done reboot and you got it!!!!!!
i had a card adapter sou will need on let me know if it helped you out....also i formatted my sdcard before i started because phone had problems mounting card when in recovery
http://forum.xda-developers.com/showthread.php?t=530527
download the update.zip
fastboot boot recovery-RA-sapphire-v1.5.2.img
(make sure you use sapphire unless you have the hero radio and spl installed otherwise the hero recovery is needed if you have the cursorsense radio which effectivly makes the magic a hero)
apply the update.zip
then you should be able to fastboot the prev instructions
just fyi make sure u check your radio on the fastboot screen before using the hero or sapphire recovery - make sure you use the proper one!
update
Hey all my problem was also with the spl as well for some reason. I also loaded the newest rogers update instead which the combination did the trick...
kob123 said:
Hey all my problem was also with the spl as well for some reason. I also loaded the newest rogers update instead which the combination did the trick...
Click to expand...
Click to collapse
yeaaa the spl is what my above tricck woulda fixed but if you loaded the latest rogers update you got no root access for now which kinda sucks
I updated the Radio on my 32a then I went to Fastboot mode to load the hboot image and discovered that i get a (failed : remote not allowed) message everytime I try to flash anything. So I guess I need a goldcard the only problem is I can't boot up to reformat the SD and make a goldcard...
Any idea's??
I'm lost!!
Can someone make a Goldcard for me, on another phone? I don't know what to do,
Thanks in advance...
anyone???
I'll pay for a goldcard if someone sends me one, assuming I can use one made on another phone in my phone. I need a way to get past my Fastboot mode and I can't boot to recovery or get anywhere else... to make a Goldcard
HELP?!?!
i used my memory card that came with my phone to create a gold card and it worked perfectly well just make sure you follow the guide to the letter.
you cant use one from another phone as you have to get the CID from your phone which is unique from phone to phone.
i believe what you should of done was flash the image first then update the radio but just search the forums theres bound to be someone with the same problem or even a google search might help
icow said:
i used my memory card that came with my phone to create a gold card and it worked perfectly well just make sure you follow the guide to the letter.
you cant use one from another phone as you have to get the CID from your phone which is unique from phone to phone.
i believe what you should of done was flash the image first then update the radio but just search the forums theres bound to be someone with the same problem or even a google search might help
Click to expand...
Click to collapse
But I can't use my phone to make a Goldcard because I can't get it booted up to a point where i can use adb shell. Only Fastboot
use a card reader. if you don't have one, go buy one, they are very useful to have lying around...
hi
please please please my phone is completely dead can i use the blue led mode ?? or the gold card to revive it and use fastboot again????
march83 said:
use a card reader. if you don't have one, go buy one, they are very useful to have lying around...
Click to expand...
Click to collapse
How does a card reader help me get the cid number off the phone? Don't i still need to get to adb mode to do that? which means booting the phone up which it won't do...
What's your HBOOT version? I got that while upgrading my RADIO. All I had to do was install an engineering SPL first. Then I was able to flash the new SPL.
you need to post more info. what radio did u upgrade to and whats your spl/hboot? Also, what recovery did u use?
I also noticed you saying something about the blueLED, I thought you could still get into fastboot...
can you still get into fastboot? I'm confused, cause you went from being able to go into fastboot and then now it's completely dead?
current set up
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT - 1.33.0010
CPLD-12
RADIO-6.35.00.29 (was 3.22.20.17 before update)
June 2 2009, 17:28:28
I the current recovery is RA-magic-v1.2.3H and I was trying to upgrade to RA-hero-v1.6.2 and Hboot 1.76.2007.
I got the radio upgraded but when I go to Fastboot to flash the hboot i get the (Failure: remote not allowed) error. So I can't change anything with the current hboot. I'm guessing I need a goldcard since I can't get to recovery mode, but every set of instructions for making a Goldcard requires the phone to be in adb shell mode which i can't get too.
At this point i don't care if i get the new radio on or not I just want it working again. I was running the SuperD 1.9.3 ROM with the Old radio...
The Blue LED issue wasn't me, I dont know who that is or what that was about.. I CAN still get to fastboot
Um, is that an engineering SPL? I believe you need one before doing this.
Did you try flashing the old radio again? Also, how did you upgrade your radio? Did you use Fastboot or Recovery?
If you can't flash anything.. well I dunno what else to do, never seen this problem yet. Maybe someone else with some more knowledge can help you, but try searching. I'm sure you're not the only one who's been through this situation.
Give this a try, I have no idea if it works though.
(Read this off unlockr)
Download the Hero Recovery Image
Put it in your androidsdk/tools folder
in fastboot, type
fastboot boot NameOfRecoveryImage.img
The only way i know how to change the Radio back is to Flash it through fastboot and this is the message i get when flashing anything through fastboot:
FAILED <remote: not allow>
The first time i changed the Radio to the new one I did it through recovery mode
I can't make it in to recovery mode anymore...
help?...
If you flash an engineering SPL you'll be able to continue. Flash 1.33.2010 and then continue from there. That happened to me too.
If you can read:
Prerequisites:
- HTC Magic / Sapphire 32A
- Engineering SPL
----- 1.33.2005
----- 1.33.2009
----- 1.33.2010
----- If you boot into fastboot and have issues with "fastboot:remote not allow", then your SPL won't work. Upgrade to Engineering SPL before continuing.
----- If you do not have an Engineering SPL, download 1.33.2010 and flash through recovery before starting this procedure. Flash the SPL update.zip like any other update.zip file.
- Working ADB/Fastboot Drivers
- Basic knowledge or modding your phone
Click to expand...
Click to collapse
This is the very top of the topic.
rquattro said:
If you flash an engineering SPL you'll be able to continue. Flash 1.33.2010 and then continue from there. That happened to me too.
If you can read:
This is the very top of the topic.
Click to expand...
Click to collapse
how do I flash it through recovery if I can't boot into recovery?
can your computer detect the device? can ADB detect it? Can you get into fastboot mode (Power+Back)? You could try to flash the engineer SPL (and the old radio) through command prompt:
Do it in this order:
Code:
fastboot flash radio Radio_HTC_PVT_32A_3.22.20.17.img
fastboot flash hboot hboot-1.33.2010.img
fastboot flash recovery recovery-RA-sapphire-v1.5.2H.img
fastboot erase system -w
fastboot reboot-bootloader
The files you'll need are all at this topic.
perhaps you missed the part about any fastboot command giving me a
FAILURE <remote: not allow> error
The one thing that gives me hope is that I get about 1-2 seconds of response from adb during boot up before it shuts down and starts the boot process again. If I knew how to run an update.zip from adb shell in one or two commmands maybe i have a chance at loading the old radio or engineering SPL or something. If I try to get to recovery mode it locks up after a second and I can't run the update through the menu...
??
fibofan said:
How does a card reader help me get the cid number off the phone? Don't i still need to get to adb mode to do that? which means booting the phone up which it won't do...
Click to expand...
Click to collapse
If you have fastboot, can't you fastboot boot recovery.img?
It's like a liveCD boot. Or maybe flash the old radio back on.
You did say you have fastboot, right?
HBoot mode?
fibofan said:
perhaps you missed the part about any fastboot command giving me a
FAILURE <remote: not allow> error
The one thing that gives me hope is that I get about 1-2 seconds of response from adb during boot up before it shuts down and starts the boot process again. If I knew how to run an update.zip from adb shell in one or two commmands maybe i have a chance at loading the old radio or engineering SPL or something. If I try to get to recovery mode it locks up after a second and I can't run the update through the menu...
Click to expand...
Click to collapse
Isn't there an HBoot mode that applies whatever is in an update.zip file? You may be able to recover your radio that way.
Windos or Lenox
i have bricked my mytouch the red screen of death VodaFone. i am trying the unbrick method (fastboot boot recover.img)
which some have said it works. would i have a better change of success on windows or lenox. cant
bricked mytouch1.0 with the new software 1.6 from htc gold card the vodafone sap.img because the usa was giving a version on device is older.
i was trying to change radio then spl looked like flash radio just fine went to the reboot then never came back from the vodafone screen.
cant fastboot and cant go to recovery
charging light just fine
Brick
ive came to the concluion that i did everything right it just bricked anyways. i think im going to send it to htc and see how much they will charge me
Ok...Problem...
I was following forum.xda-developers.com/showthread.php?t=672992, Cyanogen's thread to install 5.0.7-DS-test1. I had the latest CM stable build before.
Since it was my first time flashing the CM5 I followed step 3 in the installation post and jumped to wiki.cyanogenmod.com/index.php/DangerSPL, the installation of DangerSPL. I followed the instruction, downloaded and fastbooted the G1-radio-2_22_23_02 (fastboot flash radio radio.img) with my Magic in Fastboot (back+power). It was loaded to the Magic ok, installed ok.
Rebooted the device to begin to install CM5-, GAPPS- and 32A-kernelzips in recovery mode... But I only got the htc magic-logo (home+power).
Fastboot (back+power) works, but my computer can't connect to my device via adb/fastboot (error:device not found).
On screen:
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.33.2005 (SAPP10000)
CPLD-12
RADIO-2.22.23.02
If I start normally (power) I get the htc magic-logo and a red box in the upper left corner of the screen saying "FASTBOOT USB". Nothing else happens...
I tried to flash the DangerSPL by just powering up the device getting "htc magic" and red box. From console (fastbbot boot hboot.img) loaded ok (white vertical "load"-bar in right screen corner), but then I get "booting... FAILED (remote: reproduce boot image with on-flash ramdisk error)" in the console?!?!
HELP! Is it a brick? Then I have to cry...my magic...
I was searching all around and cant find any solution.
So i post my situation here n ask for help.
My Desire S was stuck in HTC logo, able to boot into HBOOT,
it show :
-Revolutionary-
SAGA PVT SHIP S-OFF RL
HBOOT-6.98.1002
RADIO-3805.06.02.03_M
eMMC-boot
March 10 2011,14:58:38
so now my problem is i dun have recovery,
I am able to switch to Fastboot, but i cant flash any recovery via fastboot, it stucked at writing..........
and also i cant switch another version of HBOOT, where it show on the screen : Can not roll back to older version
Adb cant connected to my device, only fastboot.
I tried RUU, by this file :
RUU_Saga_hTC_Asia_WWE_1.48.707.1_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199476_signed.exe
It show i have the same version of image as the one to install : 1.48.707.1
i am stucked at the rebooting bootloader...................
and after sometimes, it end up communication error.
I also have tried to send the unit to warranty department but they reject it as the S-OFF is clearly stated.
What option else do i have now? Help pls.
Thank you.
run revolutionary again! and when it asks to flash CWM make sure you say yes and it SHOULD give you clockwork mod back. Then you can download a rom, put it on your sd card and flash via recovery!
running Revolutionary stucked at Waiting for device................
Hi experts
One of my friend brought his Htc stuck at Htc logo even I cannot make factory reset in boot mode.. When I click factory reset nothing happens.. Don't know where to start? Can somebody tech me
I made gold card successfully
Thank you
Give some more info please
1) what is written on the top part of the screen when in boot mode
it should look similar to this:
Code:
---AlphaRev---
SAGA pvt ship S-off RL
HBOOT-6.98.1002
RADIO-3805.04.02.01_M
eMMC-boot
2) can you access RECOVERY from the boot mode menu
if yes make a picture of it and attach it here
Also see here, there are some ways to restore from white screen issue.
SAGA PVT SHIP S-ON RL
HBOOT-0.98.0002
RADIO - 3805.06.02.03_M
eMMC - boot
and if i press recovery showing recovery symbol and phone get off and vibrating 3 times
And i downloaded this file
RUU_Saga_hTC_Asia_WWE_1.48.707.1_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199476_signed.exe
when i try to update ..its stuck at rebooting to bootloader
I have a similar problem. But mine is s-off and unrooted, it occurred when I tried updating with the system OTA update (about 230mb in size). It updated, showed the circular green stuff on the black screen, booted a few times then just stuck at the HTC screen on the white background.
-Revolutionary-
SAGA PUT SHIP S-OFF RL
HBOOT-6.98.1002
RADIO- 3822.10.08.04_M
eMMC-boot
Mar 10 2011, 14:58:38
Please would appreciate your help
sharaz191 said:
SAGA PVT SHIP S-ON RL
HBOOT-0.98.0002
RADIO - 3805.06.02.03_M
eMMC - boot
and if i press recovery showing recovery symbol and phone get off and vibrating 3 times
And i downloaded this file
RUU_Saga_hTC_Asia_WWE_1.48.707.1_Radio_20.28I.30.085AU_3805.06.02.03_M_release_199476_signed.exe
when i try to update ..its stuck at rebooting to bootloader
Click to expand...
Click to collapse
It seems that your problem is complicated. Stock software and no recovery access makes it difficult to give an appropriate advice. Maybe something wrong was flashed on this phone or the worst case - "fried" eMMC chip. You can try to search across the forum for any similar or try various solutions but I cannot advice how to proceed. Sorry
linkin8k said:
I have a similar problem. But mine is s-off and unrooted, it occurred when I tried updating with the system OTA update (about 230mb in size). It updated, showed the circular green stuff on the black screen, booted a few times then just stuck at the HTC screen on the white background.
-Revolutionary-
SAGA PUT SHIP S-OFF RL
HBOOT-6.98.1002
RADIO- 3822.10.08.04_M
eMMC-boot
Mar 10 2011, 14:58:38
Please would appreciate your help
Click to expand...
Click to collapse
There are at least 10 other threads from the past 2 weeks with exactly the same problem. Do some reading, the solution is simple...
Please just tell me what to do or give me the thread cause I have searched and can't find precisely what will help. Just post something please I beg you.
here you go
Sent from my HTC Desire S using Tapatalk
Can I solve by jtag?
sharaz191 said:
Can I solve by jtag?
Click to expand...
Click to collapse
Surely simpler to return under warranty?
Swyped from my Desire S using XDA Premium
Tried everything in the thread and it won't still work.
I downloaded RUU_Saga_S_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed and used it. It showed successful but got stuck at the htc logo white screen again. When i tried using the ruu again it showed the old version which it supposedly upgraded was still in the phone.
Please help am so frustrated
linkin8k said:
I downloaded RUU_Saga_S_HTC_Europe_2.10.401.5_Radio_20.4801.30.0822U_3822.10.08.04_M_release_219480_signed and used it. It showed successful but got stuck at the htc logo white screen again. When i tried using the ruu again it showed the old version which it supposedly upgraded was still in the phone.
Please help am so frustrated
Click to expand...
Click to collapse
Hint - flash hboot 0.98.2000
After use the latest RUU 2.10.401.8
Sent from my HTC Desire S using Tapatalk
Thanks for the quick reply. I have already tried flashing hboot_0.98.0000_361a7ba6_0310 onto it using android flasher in "fastboot usb plug" but it reboots and gets stuck at the htc logo again until i remove the battery.
Also here is what androidflasher shows me :
sending "hboot" (1024kb)...
OKAY [0.191s]
writing "hboot"...
(bootloader) image update is bypassed!
OKAY [0.030s]
finished.total time:0.221s
rebooting into bootloader...
OKAY [0.248s]
finished.total time:0.248s
rebooting....
finished. total time: 0.244s
**update**
was able to flash 4ext recovery using android flasher onto my device and tried updating with the ruu again. It still gets stuck at the htc logo white background (so i painfully remove battery again) but when i try running the ruu again from my pc it shows that i have the same version as the ruu.
Still stuck at white screen. Help!!!
linkin8k said:
**update**
was able to flash 4ext recovery using android flasher onto my device and tried updating with the ruu again. It still gets stuck at the htc logo white background (so i painfully remove battery again) but when i try running the ruu again from my pc it shows that i have the same version as the ruu.
Still stuck at white screen. Help!!!
Click to expand...
Click to collapse
see the version of the bootloader
if it is still 6.98.xxxx this is you problem. Flash 0.98.2000 with PG88IMG.zip from the SDcard or try 2.00.2002 - you can find this in the forums also
linkin8k
I have the same problem and I have not found the solution up here.
can anybody tell me can i solve this by JAG?i can do jtag my self
thanks for the replies sorry i couldn't post yesterday was trying to be in a festive mood.
**my progress**
I have tried all i can to update the bootloader, from putting the pg88img file in through root of sd to update through 4ext recovery to tryin to use android flasher to put the 0.98.2000 it won't just update.
please what else can i do?? is there a hboot installer for windows for me to try??
please help AmidaBuddha u have done a lot but i still need a little help. thanks
As much as i know would be the last possible solution to replace the bootloader with dd command inside adb shell or try to flash it with fastboot (to make this the htc drivers [if you are using windows] and the android sdk with the given android plattform-tools must be installed, if some parts are not present look at the index thread)
Walkthrough:
fastboot:
reboot your device to bootloader and put it in fastboot mode
open commanline at your pc
attach device to pc
cd to the directory where the hboot.img is ( extract it from the pg88img.zip file)
Code:
fastboot devices
(your device should show up as some letters and digits at the right of it should stand recovery, also the adb daemon is started if it wasn't running before)
fastboot flash hboot hboot.img
this replaces your current hboot with the hboot.img file, don't interrupt the process or pull the usb cable, this can brick your device, i'm not responsible if something goes wrong.
dd:
put the needed .img file of the bootloader at the root of your sd (extract it from the pg88img.zip file) and rename it to hboot.img
reboot to recovery
Open commandline at your pc
attach device to pc
Code:
adb devices
(your device should show up as some letters and digits at the right of it should stand recovery, also the adb daemon is started if it wasn't running before)
adb shell
(this opens the adb command shell, from where you can execute shell commands right at your device)
dd if=/dev/block/mmcblk0p18 of=/sdcard/backup.img
(this backups your current bootloader partition to the backup.img file)
dd if=/sdcard/hboot.img of=/dev/block/mmcblk0p18
(this replaces your bootloader partition with the boot.img)
exit
(exits adb shell)
adb reboot bootloader
(reboots your device to bootloader)
this backups your current bootloader to /sdcard/backup.img and replaces it with the boot.img, but beware this is hard stuff and be carefull, don't stop the execution of the any dd command and never pull the usb-cable while it writes your bootloader, this definitly can brick your device, i'm not responsible if something goes wrong, good luck.
Tectas thanks, see what i get using fastboot:
on command line:
c:\users>fastboot devices
SH14HTJ05*** fastboot
c:users> cd c:\temp
c:\temp>fastboot flash hboot hboot.img
sending `hboot` <1024 kb>... OKAY
writing `hboot`... INFOimage update is bypassed!
OKAY
on phone under bootloader menu:
Can not roll back hboot version
........
will try dd option now.