its the first time i use sapphire i format it now need activation
when i open just show emergency call or change language
model=T-Mobile myTouch 3G
sapphire pvt 32b ship s-on g
please i need heeeeeeeeeeeeeeeeeeelp
Mmmm ok, first of all... What exactly did you did??? Because if you do a factory reset, all you have to do is put your user name and password and it's done...
Can't understand exactlly what you want to do...
Instead of double-posting and just asking for help, maybe you should read the forum.
What are you asking for help with exactly....?
Maybe first trying searching the forum or reading the instruction manual with the phone??
:No-Frost: said:
Mmmm ok, first of all... What exactly did you did??? Because if you do a factory reset, all you have to do is put your user name and password and it's done...
Can't understand exactlly what you want to do...
Click to expand...
Click to collapse
thank you brother
just i do factory reset and i cant my user name and password because i cant acces to wifi
You don't have a signal in your area?
I suggest calling your cell phone carrier IT department.
how i register it..............
Related
please while using shelltool. to upgrade wm5 to wm6 but ive just got an error message and suddenly lost my connection from activesync! please i dont know how to retrieve my phone! now after bootscreen... white screen appears and nothing happens! i tried hard reset it. nothing happens! please help!
i wish someone here could help me! please! im crying like a baby here! cant sleep! waiting for answers!
prinsipe21 said:
please while using shelltool. to upgrade wm5 to wm6 but ive just got an error message and suddenly lost my connection from activesync! please i dont know how to retrieve my phone! now after bootscreen... white screen appears and nothing happens! i tried hard reset it. nothing happens! please help!
i wish someone here could help me! please! im crying like a baby here! cant sleep! waiting for answers!
Click to expand...
Click to collapse
can you get it into bootloader (the coloured bars) ???
yes
yes sir i can!
prinsipe21 said:
yes sir i can!
Click to expand...
Click to collapse
Don't call me sir, mabe I'm younger than you
Well, then you are not the notsohappy owner of a brick
Get it into bootloader and flash your carrier's official rom
Also, see that in WM6 you must use only ActiveSync 4.5 or higher
Ask if you need help, I will be here for couple of hours and there are others who know way more than me and also can help
ill try it sir!
currently downloading .exe from htc site. dude is that an installer? do i need to flash it using other programs or not? thanks!
oh btw! i just used activesync 4.2 i am also want to upgrade my cingular 8125 to wm6 xplore1.1.. just like yours.. what steps i shall do? can u help me?
Read the wiki on how to unbrick your phone
NOTE: And don't double post
sorry sir, i just dont know what to do
anyone please help me
Get the rgb boot loader screen on by holding down camera while you reset. Then connect via usb to the pc. You will see the word " usb " appear on the bottom of the screen on your phone.
Run the exe you downloaded from your manufacturer / carriers website and it will install the stock rom.
Phone will reboot when finished.
Hey presto.
Dont panic son
Rather than just randomly flashing stuff, you need to read. Specifically:
http://forum.xda-developers.com/showthread.php?t=298613
It will step you through things and point you to the right posts to get you going. DON'T SKIP STEPS! DO Everything and check everything...
Good luck (and quit throwing "sir" around Way too formal)...
I agree
mfrazzz said:
Rather than just randomly flashing stuff, you need to read. Specifically:
http://forum.xda-developers.com/showthread.php?t=298613
It will step you through things and point you to the right posts to get you going. DON'T SKIP STEPS! DO Everything and check everything...
Good luck (and quit throwing "sir" around Way too formal)...
Click to expand...
Click to collapse
I agree what he said lol
anichillus said:
Don't call me sir, mabe I'm younger than you
Can we call you His Guru-ness instead?
Ask if you need help, I will be here for couple of hours and there are others who know way more than me and also can help
Perhaps, but you are certainly at the top end of the food chain here.
Click to expand...
Click to collapse
Anichillus--->You're funny, I edited it to be more true, less humble.
To the OP...don't panic, your wizard is not truly dead until the usb falls out and smoke comes trough all the cracks. Please do yourself a favor...READ READ READ READ READ...
READ THE WIKI, READ THE STICKIES...GET TO KNOW YOUR DEVICE COMPLETELY FIRST.
Anything you attempt, is done at your own risk...knowledge is power...understand your Wiz, be one with your Wiz.
Hi, I am new here.this forum is very usefull in windows mobile..
I have tried one of the software posted here.. Kaiserunlocker... which is processed in 123 steps accordingly...
I had done step 1 the phone is ok
in step 2 the phone goes dark with verious colours grany screen
I dont understand how to revive from this problem.. please give some Idea..
I would be appricated.
tanks.
My HTC phone Model is -KAIS100 (AT&T)
aliarjun said:
Hi, I am new here.this forum is very usefull in windows mobile..
I have tried one of the software posted here.. Kaiserunlocker... which is processed in 123 steps accordingly...
I had done step 1 the phone is ok
in step 2 the phone goes dark with verious colours grany screen
I dont understand how to revive from this problem.. please give some Idea..
I would be appricated.
tanks.
My HTC phone Model is -KAIS100 (AT&T)
Click to expand...
Click to collapse
Can you soft reset? Can you hard reset? You need to read a lot more that what you have read. This site ( Kaiser ) has the best help thread on XDA... Olipof has one in all unlocker that you should have used.
I just tried that tool a few days ago,had the same problem while flashing the kaiser of a friend...
to get it to work I did the following:
I manually installed the 3.29Hard2 SPL from cmonex using jump spl,
then used the tool you use for the sim unlock.
I think that the problem is that that tool doesn't connect via usb when it reaches the bootloader.
thanks for the kind concerns,
But one thing I dont understand, the set is in grany screen... (startup is ok but it goes to grany screen {blank} while main windows appears)
Please tell me how to put jump spl. manually?
also hard reset is not processing. how to do it?
aliarjun said:
thanks for the kind concerns,
But one thing I dont understand, the set is in grany screen... (startup is ok but it goes to grany screen {blank} while main windows appears)
Please tell me how to put jump spl. manually?
also hard reset is not processing. how to do it?
Click to expand...
Click to collapse
rtfw
You need to read son, read like you have never read before. Then when you think you understand it your almost there. I have been reading for years and have yet to make my first rom guess it really comes down to time. Well the answers are there and yes you sometimes have to dig. But there is this handy search button at the top of the page third from the right if my memory is clear. And it now uses the google search engine to search this forum a function not here years ago. So your tools are there use them wisely young grass hopper and try not to post until you have read for some days. And please dont open another thread if you have a question such as how do i jump spl you should find the appropriate thread to post in.
thanks
nate
Duplicate thread.
Thread Closed
EDIT: Answer in this thread :http://forum.xda-developers.com/showthread.php?t=433835
Ta
Dave
Hi,
I'm quite new to xda-developers (*collective groaning at the newbie, I'm sure*); what happens to phones here is rather astounding, though, and I'd certainly be willing to make a small donation to anyone that can help .
My problem is as follows: I have an HTC Touch (an Elfin; I can post my device info if necessary), and I'd like to try upgrading the ROM (I've gotten Onyx 5.01 from the forums; it looks excellent). This alone isn't (shouldn't) be a problem for me, but my Touch has, I believe, lost a few pins in it's extUSB port over the years, and will not connect to Mobile Device Centre/ActiveSync through the USB port. I can connect through Bluetooth just fine... but certain expected problems arise from flashing a ROM over Bluetooth . So, what I really need to know, in fairly well explained steps, is: how can I (safely) flash my ROM using the microSD card?
I apologize in advance for any incorrect/misplaced terminology; feel free to correct/rebuke
-Kris
Search the stickeys. There are step by step instructions available
Can you give me a link to an appropriate thread/section of a thread? I've been rooting around all day, and I can't find anything that describes my situation; every guide I've found gets to a certain point and then tells you to "connect your device via USB..." - is there no way around a broken USB connection?
http://wiki.xda-developers.com/index.php?pagename=Elf_SD_Card_Flashing
Soon, I will flashing my Elfin with this method. And I'm asking me if I must let the same name for the rom (ELF0IMG.nbh) or an other name. Can someone tell me if I must change or if it'sd OK with this name ?
Thanks.
PS : Sorry for eventually write error, I'm french.
crapula512 said:
http://wiki.xda-developers.com/index.php?pagename=Elf_SD_Card_Flashing
Click to expand...
Click to collapse
Ok, thanks, I'd seen that before, but it tells me about an "Invalid Certificate" when I get to the rebooting part... which means my device is not CID unlocked, correct? Is there any way to CID unlock my Elfin without a USB connection?
Thanks again for the help
Calmcacil said:
Soon, I will flashing my Elfin with this method. And I'm asking me if I must let the same name for the rom (ELF0IMG.nbh) or an other name. Can someone tell me if I must change or if it'sd OK with this name ?
Thanks.
PS : Sorry for eventually write error, I'm french.
Click to expand...
Click to collapse
yes, the name must be that one, or the flash process wont start.
krisrm said:
Ok, thanks, I'd seen that before, but it tells me about an "Invalid Certificate" when I get to the rebooting part... which means my device is not CID unlocked, correct? Is there any way to CID unlock my Elfin without a USB connection?
Thanks again for the help
Click to expand...
Click to collapse
mmm... thats a problem because to cid unlock u must follow the white screen method. im pretty sure u might be able to get to the white screen by hand but not sure how u will flash it then.
another posibility is flashing the unbricker rom (by sd) and then i guess u can re-flash the spl by sd too.
anyway, im not sure. maybe aman or cmonex can help u with this.
Invalid Certificate too
Does the data in the SD card get deleted after flashin the ROM via SD card..???
no, it doesn't
Thread Closed as it Contains an Anwser.
hi all guys i am just so much much confused and lost on the forum there is hell lot of useful information but i dont know where to start with i am so much confused
i am new to this android stuff i always used winmo and things there was easy sold my xperia and got magic so new to android so plzz help me
i got a NTT DOCOMO MAGIC
Sapphire EVT1 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP20000)
CPLD-10
RADIO-2.22.19.26I
MAY 27 2009, 19:06:41
nw the above is the info and i dont live in japan
by looking on the info in the forum my version of andriod is 1.6 and it cannot be rooted to need to downgrade to 1.5
and i also come to know that the HBOOT-1.33.0006 is a perfected spl and also needs to be changed
when i connect my device through htc sync it alway says disconnected
i can send mms as there is no option anywhere to send it although i have set the correct APN gprs works fine
i am just lost after three days massive reading and searching the forums on unlockr andriod development and xda developer and numerous videos on u tube am just confused and frustrated and need ur help guys
just tell me where to start as many people say wrong procedure my lead to bricking of phone dat i dont want
i first tried the flash rec program didnt work out for me
then tried the relentless rooter it goes till flash boot usb then gives error
then i tried the Ruu signed but cudnt do it coz HTC sync doesnt connct my phone
then read about that gold card and was confused
nw its thought of posting and asking for some expert opinnion the steps i should follow where to start and wat to do first
and i am not in Japan i am in Pakistan but NTT DOCOMO is japanese
no 1 there to help come on guys
.........................meh, cbf
??? didnt get ya
saqibs said:
??? didnt get ya
Click to expand...
Click to collapse
http://en.wiktionary.org/wiki/CBF
look at the apps that come with the docomo rom. do you see mms.apk? do you see DocomoSms.apk? Hmm... Maybe there is a reason it doesn't do mms
i am not talking about mms alone i am talking about downgrading i am talking about loading custom roms
needs help regarding that and yes i installed the pic say mms software
i am not talking about mms alone i am talking about downgrading i am talking about loading custom roms
needs help regarding that and yes i installed the pic say mms software
Not sure if my idea works, but you might want to download the sappimg.nbh.
Put this file in the root of your SD, start fastboot (holding end & power). After fastboot loaded, press volume down. This will put the magic back to an original 1.5 rom. After that you can try and root it again, and try any rom you want.
thank you brother but its not working due to perfected spl
try the one click root after you downgrade it
you can find the apk here
http://www.ryebrye.com/blog/2009/08/16/android-rooting-in-1-click-in-progress/
softbanksucks said:
http://en.wiktionary.org/wiki/CBF
look at the apps that come with the docomo rom. do you see mms.apk? do you see DocomoSms.apk? Hmm... Maybe there is a reason it doesn't do mms
Click to expand...
Click to collapse
Yes, you're right. Docomo do not provide MMS Service, since they have i-mode.
saqibs said:
thank you brother but its not working due to perfected spl
Click to expand...
Click to collapse
If so, there is another way of GoldCard. Pleaes refer following thread.
http://forum.xda-developers.com/showthread.php?t=548218
thanks bravo i will chk that and i firstly want to downgrade my phone
canot cid unlock verizon htc touch it always goes to 15% on step 2 and my phone freezes i dont know what im doing wrong help!
have a look on the Wiki:
http://wiki.xda-developers.com/
it always helps!
i still cannot find any thing
Are you flashing to a different carrier or are you just trying to install a new ROM.
bradsinram said:
canot cid unlock verizon htc touch it always goes to 15% on step 2 and my phone freezes i dont know what im doing wrong help!
Click to expand...
Click to collapse
I just browsed through your previous posts and noticed that you had posted in this thread http://forum.xda-developers.com/showthread.php?t=372152 I don't want to sound like a jerk or an idiot but you do know the ELF is the GSM version of the CDMA Touch, XV6900, MP6900. You are trying to use a SPL for the wrong device. Let me see if I can find you a link for the wright thing.
Give this a try for your Verizon xv6900 "Touch"
http://forum.ppcgeeks.com/showthread.php?t=20370 it should work a little better.
sorry I know there is a tutorial here on XDA I just don't remember where.