Hi,
The thouchscreen doesn't work. I've doa a hard reset, flashed a fresh rom, but stil doesn't work. The phone did't fell, just stoped working suddenly. It responds to the keyboard, but not to the touchscreen. Do you have any ideas about this? Thanks
most likely the digitiser has failed - if its under warrenty get a RMA & send it back. If not, check ebay for a digitiser (if you're less able to repair delicate parts get a screen & digitiser together) or if you really hate/cant/dont want to take it apart some places will replace it for you (either in a store, or online - send it off, comes back fixed!).
groguetrader said:
Hi,
The thouchscreen doesn't work. I've doa a hard reset, flashed a fresh rom, but stil doesn't work. The phone did't fell, just stoped working suddenly. It responds to the keyboard, but not to the touchscreen. Do you have any ideas about this? Thanks
Click to expand...
Click to collapse
I had the same problem. I returned it to AT&T Repair Center and they replaced the phone (under warranty). No mistreatment...it just stopped working after about 8 months.
touchscreen dead
Thanks.
I dont't have warranty, so I ordered a digitizer+lcd. Does anyone have some instructions for me to repair it? The "dismantle guide" I've seen is not very clear on the screen issue.
By the way, do you recomend any online repair service? It's tough to live without my Touch Pro ....
Cant recomend any particular repair center (and you dont say where you are - so wouldnt want to suggest one overseas!) however, i would guess most would want to supply & fit the parts (and you have already ordered).
That said.... Taking things like this apart isnt "too" tricky (yeah, i dismantle stuff for a living as well as a hobby so slightly less phased i know).
The main thing is never rush the job. If it takes you 2 days to take apart & 2 more to rebuild it - so what. Make sure you have a clear work station / desk (so you dont lose screws etc) and have space to put things down. Access to the web is often useful, as is printing out the guide / pics (if you're not near the pc).
From the wiki - Russian - but the pics are good or Mike Channon's service guide mirror - the instructions look great.
Always use the correct tools (phones are often T6 torx screws - but the service guide says its philips 00*50 - so make sure you have!) and some plastic pry/lever is normally essential (dont use a screwdriver / knife / piece of metal etc etc - you will break or damage something)
Good luck!
call att warranty dept 1-800-801-1101
Related
hi!
This is my first post here. I have the following problem: yesterday my phone was fine...today not. Yesterday I was using the touch screen as usual with no problem, today the battery was to low and I turned off the phone. When I get back home, I connected the phone to charge it, and PUF!! the touch screen was not working at all...sometimes I can tap some menu, sometimes not, but in general terms, I can only use my phone with the keyboard. I did a soft and hard reset and nothing happened, I don´t know what else to do. I see this is kind of common problem, but no one has a common solution. Any suggestions?
Thanks!
My phone has windows mobile 6.1 Professional. CE OS 5.2.19971 (Build 19971.1.2.6)
ROM version 1.95.502.5 WWE
Radio version 1.02.25.32
Protocol version 52.39c.25.22H
u were able to use the windows 6.1 explorer? like looking for files under files explorer with no problem?
my phone is just as new as yours, i feel so frustrated! I was able just to use the keyboard, no touch screen commands were functioning. As i said, I have seen too many people complaining about this (if I would have known that, I would´nt buy this piece of crap)
dcgamboa said:
my phone is just as new as yours, i feel so frustrated! I was able just to use the keyboard, no touch screen commands were functioning. As i said, I have seen too many people complaining about this (if I would have known that, I would´nt buy this piece of crap)
Click to expand...
Click to collapse
At any time did you apply too much pressure on the screen?
Is your d-pad still working?
What about other hardware buttons besides the keyboard?
As I said, one day was working perfectly, and next day a kept it turned off since the battery was gone, and I was not at home to recharge it. So basically one day was fine and 12 hours later was not. The rest of the buttons are fine.
I did a hard reset, and at some point of the process the device indicates that I need to align screen, so a small cross show up in the middle of the screen (yo oughta know how is this...) well: I tap the cross and nothing happens....I tapped again...and nothing happens...3 tries later, finally the cross moves and the process goes on, To complete the process it takes me about 15 minutes!!!!!! but still nothing works out, the align screen process starts over again, and thats it!
At least, before the hard reset I was able to start my phone....now is impossible
Dont know what to do...
dcgamboa said:
As I said, one day was working perfectly, and next day a kept it turned off since the battery was gone, and I was not at home to recharge it. So basically one day was fine and 12 hours later was not. The rest of the buttons are fine.
I did a hard reset, and at some point of the process the device indicates that I need to align screen, so a small cross show up in the middle of the screen (yo oughta know how is this...) well: I tap the cross and nothing happens....I tapped again...and nothing happens...3 tries later, finally the cross moves and the process goes on, To complete the process it takes me about 15 minutes!!!!!! but still nothing works out, the align screen process starts over again, and thats it!
At least, before the hard reset I was able to start my phone....now is impossible
Dont know what to do...
Click to expand...
Click to collapse
well then you have several options:
1) bring phone back to the entity you purchased it from considering you stated it was new it should be covered under warranty unless you purchased it from eBay w/o warranty
2) If you know it is the Touch Screen then I suggest using xda search function and searching "Think your digitizer is broken" and apply it the Fuze rather than the Tilt
3) attempt to replace the screen
4) sell it "as-is" for a loss
Problem solved!!!
Thanks guys for the suggestions. This seems to be a very common problem. But in my case the solution was simpler than I would ever though!! I read in other posts that this unresponsive touch screen problem is usually created by particles of dust, (sand! in my case), stuck in that tiny gap between the screen cover and the phone body, and the solution was to gently pass a piece of paper thin enough, (flexible plastic CD cover, in my case) well....Having tested all kinds of software """solutions""", and been prepared to pay for an expensive fix (I live in Costa Rica, this kind of phones are not common use, so fixes are expensive)...so I gave I try to this solution...and surprisingly IT WORKED...there were lots of dust, and even sand grains stuck in that gap, and like the phoenix...my phone got back to life!
Its amazing how delicate are these devices!! I think they are intended for enclosed-temp-controlled-ultraclean places only.
I hope this helps a lot of people having the same problem.
Thanks!
dcgamboa said:
Thanks guys for the suggestions. This seems to be a very common problem. But in my case the solution was simpler than I would ever though!! I read in other posts that this unresponsive touch screen problem is usually created by particles of dust, (sand! in my case), stuck in that tiny gap between the screen cover and the phone body, and the solution was to gently pass a piece of paper thin enough, (flexible plastic CD cover, in my case) well....Having tested all kinds of software """solutions""", and been prepared to pay for an expensive fix (I live in Costa Rica, this kind of phones are not common use, so fixes are expensive)...so I gave I try to this solution...and surprisingly IT WORKED...there were lots of dust, and even sand grains stuck in that gap, and like the phoenix...my phone got back to life!
Its amazing how delicate are these devices!! I think they are intended for enclosed-temp-controlled-ultraclean places only.
I hope this helps a lot of people having the same problem.
Thanks!
Click to expand...
Click to collapse
awesome!!!! good job.
More info needed on "HTC fuze touch screen not working"
Hey, Ive tried following the thread about the htc fuze touch screen not working... up until the part about sand in 'some space between something...'
can someone provde more context/ pics? of where the sand might be.. because it sucks trying to use the fuze without a touch screen.
thanks for the help.
and the HTC customer support immediate went to the "well just hard reset the phone"... how quickly they are willing to erase all that data and hours of work to reconfig the phone..
any help is appreciated...
They were talking about the tiny gap between there the top layer of the screen (the material you touch) comes into contact with the body I believe. What you can try doing is running a piece of paper or something thing enough to wedge out the dirt in that area.
another somewhat common problem is the newton ring. You'll see an oily residue in the center area of your screen (it looks like rainbows). What I believe happens with this is your screen gets stuck to the actually LCD display underneath and doesn't bounce back to go back to it's resting state. What some people have said is to get some sort of adhesive material and use that to pull the screen up gently, so it goes back to resting. People have used tape and the such. Just be careful you don't pull the screen off your device.
I dropped my touch pro and cracked the screen in a few places. I think it works normally except for the screen, as it receives calls fine...
A new phone isn't in my budget right now. Does anyone know of a good place (hopefully in DC, MD or VA) that will supply or install a replacement touch screen?
(btw, no recent threads came up when I searched.)
Ebay!
Just looked, $30 including postage for a screen & digitiser if you are able to do it yourself.
How hard is it to replace a screen if it has surface damage? Is there anywhere i could find a walkthrough or help?
Shame man, its a tragedy of what happened to your phone...
Luckily its not too bad, and you may just be able to fix it. You can download the service manual for the phone here: http://htcwinmobile.blogspot.com/2009/03/htc-raphaeltouch-pro-service-manual.html
Just a note though, make sure you DO USE tweezers or something to get the speaker wires out of the way before snapping the enclosure back into position... I had to reopen the phone again, after powering it, to rejoin one of the little wires thats like a tenth of a millimeter thick DO NOT IGNORE ANYTHING THEY TELL YOU IN THE MANUAL. Oh, and what works well for the "plastic removal tool" is a cut out piece of plastic ice cream container. AGIAN, do not ignore anything in there... You are voiding the warranty permanently when you do it yourself (which you unfortunately have to).
Anyways, good luck!
I drop my phone also, but the screen didn't actually cracked! but I do have is problems with the screen in other ways! Sometimes I get a black screen when I turn on the phone and sometimes not, but when the screen turns on, it flickers a lot and have lines thru it. What suprises me is that sometimes I get perfect images on the screen (Which makes me think that the screen it's not damaged).
Any suggestion would be apreciated. Thanks!
3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!
a.mendoza said:
3 days and still no answer from anyone! I would like someone to throw me ligth on this issue. I'm waiting for this to know exactly what I need to buy, before I start assuming things.
Thanks in advance!
Click to expand...
Click to collapse
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.
maxh said:
Sounds like the LCD connector may have come unseated. You could open up the phone and make sure all connectors are firmly seated if you feel confident in your abilities.
Click to expand...
Click to collapse
Thanks for the advice! I was thinking on that also and wanted to take my chances opening the phone (oh god!).
BTW, I saw the $30 LCD Screen+Digitizer combo on ebay that Beeble referred to, but I'm not sure if it fits on the fuze (my model). What have come to my mind it's to buy also the front camera of the phone (like a thread on the kaiser) to mod the cell, in case I need to buy the screen+digitizer. I've search all threads about this issue but nobody has done it because it was too expensive for the result; I believe with this price it's worth it right now!
solved
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
I used Diamod (!) LCD and Touch Pro digitiser. Works perfect.
Much more cheaper
If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050
-G-Rey--- said:
Try this steps:
http://www.pdacenter.ru/razborka/htc-touch-pro/
Click to expand...
Click to collapse
WOW! What a long way to get to the screen. Good luck for everyone who tries to dismount and mount the Raphael.
maxh said:
If your screen works fine sometimes, you most likely don't need to replace it. there's probably just a loose connection somewhere. If you really want to replace it though, there's an ebay seller with a really good deal. $20 for the screen and digitizer already glued into a new front body piece: http://cgi.ebay.com/OEM-HTC-FUZE-LC...wItemQQptZPDA_Accessories?hash=item3ef8817bf6 That one's for the fuze, but I think the seller has other models too. I'd definitely get the LCD and digitizer together or else you might end up like I did on my first attempt: http://forum.xda-developers.com/showthread.php?t=584050
Click to expand...
Click to collapse
Thanks for the advise maxh,
I just wanted to let you know that a miracle just happened! my cellphone started to work just fine without even opening the phone! it has more than a week on this situation so I believe that it's exactly what you stated (the LCD conector became unseated or loose). Since it's still working, I have no need to open it! so I'll just wait until it becomes defective again and at that point just open it and tight up the LCD connector!
Anyway, I would love if somebody could make the mod that I was refereing to before (changing the screen of the fuze by the touch pro one) and see if it's possible to attach the front camera on the fuze.
Once again, thanks everybody for your opinions.
I got my new display+ digitizer on Ebay (65$) and replaced it, using the russian link mentioned above ( follow the exact procedure) , it took me 2 hours to do it, and after lot of patience it worked! My problem was the digitizer never worked fine, and after replaced it it worked like never before. If You are not familiar with repairs, it will be a mistake and waste of money to buy a display without digitizer. NOW, I have a small problem, my display has a NEW color, it's like color temp is WARM for this display, and COLD for my old display, AND COLOR level is lower, and the result is display without vivid colors, black like gray. Is there any way to change the DISPLAY color settings?
Hi xda-team and users...
recently i bought a real cheap i5800 on ebay. it works like a charme. there is only one problem (probably the reason of cheap selling):
there is some dirt under the display :-| i can live with it when i have to but when there is an opinion.
its there any way to open the cover and clean the display?
or can i get another cover (maybe the "dirt" is on the cover-side and not directly on the display)
someday i saw a replace cover for my old 5230. maybe there is one for the 5800 (tried google and ebay but i didnt found one).
another idea was to buy this:
xxxx://cgi.ebay.com/New-Samsung-I5800-Dummy-Display-Mobile-Phone-Toy-/200539469221?pt=LH_DefaultDomain_3&hash=item2eb11575a5
and try to open it and replace the original phone cover with the dummy parts. i know nothing about touchscreens (i am an electrician but in another sector) thats my problem.
maybe any1 here can help me with some information.
thx in advance.
Malte41
Just for you to know: i open the case/cover and cleand the touchscreen. It was not that hard as i expected. If any1 need some help with opening i do it again and make some pics for a guide. Just msg me.
Sent from my GT-I5800 using XDA App
yes please, I disasembled 6 screws and REAR (step 4 at service manual) I am affraid of point 5-8 , there are NO steps how to replace front cover what I need :-( ...
- Updated :
After 5+ hours I successfully replaced back cover and front cover too - As service manual is totally GAY and useless for this, I had to experiment - LCD and touch screen does hold to front cover by glue :-( ... and at grey plast what cover LCD and what is the last visible part at GAY useless service manual - you have tu use little force to make it out and dont be affraid of damage it ... .
Euhm, hey guys...
Last week I was in Austria for snowboarding, so at a certain moment I had my phone in my hand, and slipped in a small pile of snow....
My thumb made a small 'dent / scratch' in the screen, and the phone was a little wet for about 1/4th part of its total size.
Now, when I turn it back on, the touchscreen partially works and partially not.
When in the pin-code screen I can touch everything till the 7,8 and 9, under those (onscreen) buttons, the screen is unresponsive, and I believe the software buttons are also unresponsive, but I can't test because I can't get in my phone, neither with out without simcard...
My question were, is there any way I can manually fix this? Is it definitely a hardware problem?
I'm using a Sony Xperia Tipo, currently on Gimlo 0.2 Rom, Stock kernel, rooted, unlocked bootloader...
Uhmm, I don't know what information you guys need apart from this. Hope someone can help me :good:
EDIT1: Hardware problem indeed, flashed stock, still no response on the supposedly broken screen parts...
(Disassembling guide?)
Sorry for the bump,
Does anyone know if there's any guide on disassembling an Xperia Tipo yet?
I'm considering replacing the digitalizer manually. Found a website where I can get the digitalizer + glass quite cheap, and well, as I tried alot of things, and I cannot even unlock the lockscreen because of the broken part of what probably is the digitalizer (no real cracks tho, just unresponsive), I think there's no other way then either go to a service center and hope to be lucky to get this done with warranty OR fixing it manually...
the first thing comes into my mind is trying to dry the phone. there might be a little water inside the phone. I don't know how you could do it on your place but we have a tool called desicator on our lab which could be used to get rid the waters. if you don't have it you can make it by yourself. you can use a litle jar and silica gels. put your phone inside the jar then bury it with the silica gels. after 24 hours you can try to turn it on. another cheap solution is bury your phone inside rice (the uncooked one). the rice will just like silica gels and adsorb the water partikels.
anyway, in my country service center almost never check the bootloader. if you're lucky enough you can claim the warranty and got free repair or even a phone replacement. goodluck mate.
We have something called "Contact Spray" or something, which should do the same.
Anyways, I've waited about 36h after it happened to first try to turn it on again, thing is, the phone seems to function normally, except a PART of the touch screen.
I'll try the rice / gels thing. Not sure if it'd make any difference though.
Thx for the tip, I'm not sure about our Sony Centers, Dutch people are a bit 'greedy' usually, they'll probably check, but hope I'm lucky.
Also hope they won't say it's water-damage, because that's not covered in warranty in europe, although I'm pretty sure that isn't the real cause... Service Centers like letting us pay for reasons that are untrue in this country... -_-
After 5 months of use, I managed to break my screen....dam it! I've always been quite careful with my electronics, but managed to drop it today. And of course like a cat always lands on 4 legs, phones usually land face down.
Broke the top of the screen and the touch screen is rendered useless. Put an RMA in with Alcatel. I've read others on the internet have managed to get a claim in and Alcatel fixed it for a little better than $100. I would pay the $100, as opposed to buying a new phone.
Questions I have:
1. Since I can't get into my phone, is there any other way to get any data off of it? LCD is still visible, just can't get in.
2. Has anybody had a "positive" experience with getting a glass screen fixed on this phone yet? I've read a few breaks in the forum here, but it doesn't seem like too many have followed through with the repair experience.
3. Are, or is there any advice with regards to this phone and the broke screen?
Thanks in advance for any help.
Dang that sucks......so to get data you can plug it into a computer and the computer should let you pull all your info off. Also I can't help you with the getting the screen fixed as I never broke a screen on my phone.
kevin6876 said:
After 5 months of use, I managed to break my screen....dam it! I've always been quite careful with my electronics, but managed to drop it today. And of course like a cat always lands on 4 legs, phones usually land face down.
Broke the top of the screen and the touch screen is rendered useless. Put an RMA in with Alcatel. I've read others on the internet have managed to get a claim in and Alcatel fixed it for a little better than $100. I would pay the $100, as opposed to buying a new phone.
Questions I have:
1. Since I can't get into my phone, is there any other way to get any data off of it? LCD is still visible, just can't get in.
2. Has anybody had a "positive" experience with getting a glass screen fixed on this phone yet? I've read a few breaks in the forum here, but it doesn't seem like too many have followed through with the repair experience.
3. Are, or is there any advice with regards to this phone and the broke screen?
Thanks in advance for any help.
Click to expand...
Click to collapse
Have you tried using an otg cable and wireless keyboard/mouse?
Yes , I tried using the OTG , but the lockscreen needs to be unlocked for the computer to communicate with both the internal and SD card storage areas. The back door is locked.
I submitted an RMA to Alcatel and am waiting for further instructions in a repair. Hopefully it won't set me back too much. If it does then I'll just pick up a used one through Swappa.
Thanks for the help.
Sent back to Alcatel. $105 to replace the busted digitizer and ship it back. Hopefully they didn't wipe my phone with a hard factory reset, I requested they not.
Should have it back Tuesday.
Just a follow up with the replacement of the digitizer. Alcatel sent the phone back to me yesterday and they wiped the hard drive with a factory reset, despite my request not to.
Phone works very well now though, I must say. Mostly all my data and apps loaded right in with ease, just lost some texts and a small folder of downloads and photos that were on the phone. Not all was lost.
Don't seem to have SD card issues any longer now, like I had before, which I find interesting. Must be the hard reset that had something to do with that, but my 3rd party launcher always used to struggle to load app icons properly, the SD card would some times not read properly? All that seems much smoother now however.
Cost me $105, oh well...time to get myself a better glass screen protector and case. I had an LK case w/ a kickstand and a peel off screen protector prior. I'll be stepping that up a notch now. One more break of this phone, I'm moving on to a different device.
Peace.