I'm looking for the Connection Setup 3.0 cab file or a build that recognizes Claro as Carrier and Puerto Rico as Location. I recently flashed to a newer ROM which had the Connection Setup 3.0 and it did the work, but had to reflash to older ROM because I was having problems. I actually searched for the file but the only thing I found was the package and I don't know how to convert to cab file. I really need to have the connection settings for Claro. Hope someone can help me.
try here diaduit.trg.ru/ if the link doesn't work search for diaduit roms and the link is on his signature. hope that helps.
Thanks
I downloaded. Will try and then inform.
Many thanks
Related
Hi,
I've been trying to download the file "/Magician/Shipped_ROMS/WWE_106600_115_10500.exe". The download succeeded. When i try to unpack this file (either with Winrar - any version - or by running the executable) i get a message saying the file is corrupted. So i end up with just some files, not all of them. As a result, when i try to upgrade the QTek S100 i get a message saying that "RU.dll" is missing (the file was never extracted because of the corrupted file).
This as caused me many problems. So, can anyone PLEASE HELP? It would be nice if someone could email me - [email protected] - (or post the direct links) the extracted files, so i can proceed.
PLEASE HELP!
Best regards...
I have downloaded the same rom (using the wiki link to the ftp) and extracted it with Winzip without any problems. I could not and will not try installing it on my device though. Your downloaded file is corrupt either due to a bad internet connection during download or bad sectors in your hard disk.
One suggestion though; you should have used a different title to your thread since you yourself have proven that downloading is not a problem but that you get a corrupted downloaded file.
I've tried to download it (and many other people on different machines and from different locations) and the download is corrupted. I used WinRar (old and new versions). It's strange that only this download seems corrupted (not only to me, but to many of my friends who tried to download it as well), since i download many files from many servers daily with no problems! So, if it worked for you, could you please email me the files?
Some of the files are too large to send via email. Tell me what files you're missing and can send them to you as long as they are not the large ones.
As I said, I can't 100% prove that the rom is not corrupted since I haven't tried installing it and will not do so. It could be that the rom is indeed corrupted during the upload.
Why not try another rom? This is quite an old one. The latest and last rom is the ver. 1.13 with radio 1.12.
Ok, so where is that ROM for download? Is it in "Shipped_ROMS"? If so, what file should i download?
I'm trying to solve the following problem: i've been trying to use my QTek S100 with my car (Audi). The problem is the following: i successfully connect the QTek to the car (bluetooth); it lasts for 15 minutes, after that the QTek just hangs and i have to do a soft reset. This behaviour is random - sometimes QTek doesn't hang, it only disconnects the bluetooth. If i turn on the QTek's light (right side button) the bluetooth comes back on.
I've tried to install bchs, but it didn't solve the problem. Any ideas?
The car works fine with Nokia phones. So, i'm really thinking about disposing my QTek...
Here's the link;ftp://ftp.xda-developers.com/Magician/Shipped_ROMS/. Look for the file WWE_11300_550_11200.exe. This is the latest and last ROM for Magician based devices.
Unfortunately I couldn't help you with your BT problem. I've long ago read some threads about this. Just try to do a search.
Can you please tell me how do i upgrade my bluetooth driver's version? I think that QTek S100 ships with 1.2 version. Can i upgrade it to 2.0?
I've never really bothered what bt version is in my device since i've never encountered problems. I believe that the bt firmware is automatically upgraded when a rom or especially a radio rom is installed.
Hey guys I am currently using the Black Diamond 2.0 rom and since I have installed it, my gprs, edge, and wifi will not work.
Is there a cab file that will repair this or am I stuck with no internet on my WIZARD untill I change the rom again?
I noticed that when I used NBD 8.3 that there was an auto config network settings when I first booted the phone for the first time. Is there something like that that I can get for BD2.0?
Please help. I am desterate. Thanks in advance.
Dan.
Assuming that you are on T-Mobile US Try going to this link and it will tell you how to configure all your settings. - http://www.gruups.com/tzones/ There are a whole lot of other posts on XDA that tell you how to do it also, but I had this page bookmarked frow way before I started coming here and the settings are right. There's also cab files around here that will do the settings for you if you look for them.
I actually found a cab file that automatically set up all of that. Thank you though
In the future, if your question is directly related to an existing ROM, post it in that ROM's thread instead of starting a new thread. It's always better to post in an existing thread than to start a new thread.
dharvey4651 said:
Hey guys I am currently using the Black Diamond 2.0 rom and since I have installed it, my gprs, edge, and wifi will not work.
Is there a cab file that will repair this or am I stuck with no internet on my WIZARD untill I change the rom again?
I noticed that when I used NBD 8.3 that there was an auto config network settings when I first booted the phone for the first time. Is there something like that that I can get for BD2.0?
Please help. I am desterate. Thanks in advance.
Dan.
Click to expand...
Click to collapse
assuming you have T-Mobile, check my rom, at the end of the first post you'll see t-mobile pack, install the connection setting cabs from that pack
Thank you guys for all of your help. Next time I will post under the specific rom's thread.(My apologies)
Can somebody extract Connection setup/wizard from Raphael ROM.
I need this for my Touch cruise/Polaris, because in original ROM there is no setup for my operator (Slovenian-Mobitel).
Thanks very, very much.
Grega
i am using tomal v.08 ROM version in is fantastic
my radio version is 1.09
how can i upgrade my radio?
can somebody tell me in very simple steps?
hey there, go here....
http://forum.xda-developers.com/poll.php?do=showresults&pollid=356
its a poll of radio roms!
choose the one you want.
go here.....
http://vidmes.com/xda/Uni/Radios/
Download the one youve chosen.
Simply put it in the directory of tomals 8.2 installer (If the installer is an exe, extract it with winrar to a directory and pop the radio rom file in.
If you run the installer it should install the radio rom and tomals rom, so remember to back up your contacts, pictures, etc as you will be asked to hard reset at the end of the install (just follow the on screen instructions).
technically if you remove tomals rom file, it should just update the radio rom but im not to sure about that, you wold have to try it for yourself! And with that i shall pass on the immortal words.
I take no resposibility for any issues you have after the upgrade
jigs it was more easier in that
just download theRU link from the samelink u provided
copy radio into Ru extraction file
and run RU
thats it
thanks anyways
but i still dont know wat r fuctions of radio how it works n wats its use?
im not totally sure myself, ive always guessed that its the bluetooth wifi and gprs that it deals with, ive never had any problems so i think i only changed it the once & didnt see any real differance.
Anyways glad you got it sorted.
In the WIKI there is a chapter of radio only upgrade with a lot of usefull info
after i flashed my rom([htc wizard]cingular8125) to haseeb wm6.5 the wi-fi doesn't work anymore(in the comm manager you cannot turn on the switch for wi-fi). which one is wrong? can someone give me a direct link for a good rom? or somthng that can bring back it's WLAN connection. thanks in advance!..
Just a guess ...
/windows/wifiinit.exe ... copy a link to /windows/startup?
Search haseeb's thread to see if anyone complained about wifi, and what suggestions were made.
whew thanks!
i think i'll just reflash it with ham3r's rom. i hope this will do better..
downloading.....
If that also gives you problems, please let us know. Someone else is reporting wifi problems with Ham3r's 6.1 ROM, but it works well for me.
freaked out!
i just finished downloading one of your threads, both the radio and the rom in ham3r's wm6.1.
but..
when i unzip the file (HTC_Wizard_61_21042_WWE_H3r5_b)?
it requires me to enter the password for encypted file nk.nbf..
what should i do?
am new to upgrading roms.. the only thing i'm familiar with is flashing
cotulla's work on my magician.
pls help.. thanks!!
Ham3r is the password
Sent from my Full Android on Vogue using XDA App
finally,i already unzipped (HTC_Wizard_61_21042_WWE_H3r5_b)..
[thanks for the pass]
last questions before flashing...
*do i have to rename the nk.nbf(os) and nk.nbf(radio) before running RUU?
*i already have the RUU(rom update utility) and already unzipped.
should i just paste both .nbf files in the folder before running RUU.exe?
*how am i going to use both .nbf files to flash my rom?
*do i need to downgrade first to its original rom before flashing ham3r's wm6.1 from haseeb's wm6.5?
i have everything in place.. just teach me how the installation works..
thanks..
dont need to rename, just put one in RUU folder, flash it, put the other in RUU folder, flash it too. Really, this information is in the stick threads named something like "read first" or "how to flash"
thanks!!!
thank you very much i finally flashed my wizard with ease with your help..
i flashed it first with its original rom so errors can prevent..
then flashed it with ham3r's rom..
cross fingers!!,, then here you go..
everything works good..
boot time fast..
signal strong..
wi-fi switch not greyed out..
pre-installed programs and apps ( thumbs up!)
thanks!