Hi,
I've been trying to download the file "/Magician/Shipped_ROMS/WWE_106600_115_10500.exe". The download succeeded. When i try to unpack this file (either with Winrar - any version - or by running the executable) i get a message saying the file is corrupted. So i end up with just some files, not all of them. As a result, when i try to upgrade the QTek S100 i get a message saying that "RU.dll" is missing (the file was never extracted because of the corrupted file).
This as caused me many problems. So, can anyone PLEASE HELP? It would be nice if someone could email me - [email protected] - (or post the direct links) the extracted files, so i can proceed.
PLEASE HELP!
Best regards...
I have downloaded the same rom (using the wiki link to the ftp) and extracted it with Winzip without any problems. I could not and will not try installing it on my device though. Your downloaded file is corrupt either due to a bad internet connection during download or bad sectors in your hard disk.
One suggestion though; you should have used a different title to your thread since you yourself have proven that downloading is not a problem but that you get a corrupted downloaded file.
I've tried to download it (and many other people on different machines and from different locations) and the download is corrupted. I used WinRar (old and new versions). It's strange that only this download seems corrupted (not only to me, but to many of my friends who tried to download it as well), since i download many files from many servers daily with no problems! So, if it worked for you, could you please email me the files?
Some of the files are too large to send via email. Tell me what files you're missing and can send them to you as long as they are not the large ones.
As I said, I can't 100% prove that the rom is not corrupted since I haven't tried installing it and will not do so. It could be that the rom is indeed corrupted during the upload.
Why not try another rom? This is quite an old one. The latest and last rom is the ver. 1.13 with radio 1.12.
Ok, so where is that ROM for download? Is it in "Shipped_ROMS"? If so, what file should i download?
I'm trying to solve the following problem: i've been trying to use my QTek S100 with my car (Audi). The problem is the following: i successfully connect the QTek to the car (bluetooth); it lasts for 15 minutes, after that the QTek just hangs and i have to do a soft reset. This behaviour is random - sometimes QTek doesn't hang, it only disconnects the bluetooth. If i turn on the QTek's light (right side button) the bluetooth comes back on.
I've tried to install bchs, but it didn't solve the problem. Any ideas?
The car works fine with Nokia phones. So, i'm really thinking about disposing my QTek...
Here's the link;ftp://ftp.xda-developers.com/Magician/Shipped_ROMS/. Look for the file WWE_11300_550_11200.exe. This is the latest and last ROM for Magician based devices.
Unfortunately I couldn't help you with your BT problem. I've long ago read some threads about this. Just try to do a search.
Can you please tell me how do i upgrade my bluetooth driver's version? I think that QTek S100 ships with 1.2 version. Can i upgrade it to 2.0?
I've never really bothered what bt version is in my device since i've never encountered problems. I believe that the bt firmware is automatically upgraded when a rom or especially a radio rom is installed.
Related
this afternoon i found an update on the swedish qtek site.
http://www.qtek.se/default.asp?nc=4484&id=127&element=0
wonder if it could be used by english speaking users? it says WWE, so i guess it is in english?
i'm uploading the unpacked installation folder to FTP now. maybe someone who knows his thing, could magic a .bat file with the correct checksum to change the carrier and language? [pinoo? ;-)]
the file is called: MA_Qtek(BrPt)_10600_116_10500_SHIP.zip
Hi there..
I will take a look... But my device is with PocketPcTechs at the moment... Getting 128MB RAM ... WOOOOOOOOOOOT
:lol:
Cheers
has anybody yet found out what the passwords for the rom files are?
btw, have the last ones (the imate rom for example) been cracked or did anyone blurt out the right keys?
cu
A bad traduction :
Click on the links below in order to update your Qtek S100. Follows installationsguiden careful in order to few a correct updating.
ROM 1.06.116WWE
(updating from ROM 1.03.148WWE to ROM 1.06.116WWE)
The updating is only for Swedish sold Qtek S100 with software version 1.03.148WWE. In order to check which version you have pressures Start>Settings>System>Device information, you find the information on ExtROM version. If you try to update with another version of software can the to damage your Qtek S100.
The updating ROM 1.06.116WWE contains:
GSM-radio software
MMS client (2.0.0.20)
Caller IDS
Phone PAD Swedish T9
Updated Blåtandsmjukvara
Installationsguide ROM 1.06.116
actually it was pretty clear that qtek only offers their support to their respective customers. Nevertheless it should be quite possible to gain advantages out of an alien fw ;-)
...so it could not be used for I-mate JAM and other models.... :roll: If someone has updated the firmware pls report the "improvements"...
Regards,
Primoz
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
taron said:
Yes and please send us (or push it on the FTP) the content of ExtROM.
Thanks !
Click to expand...
Click to collapse
That would be very nice!
Regards,
Primoz
Anyone upgraded yet?
Hi, has anybody yet tried out the new QTEK ROM 1.06? If so, could you be so kind to make a ROM image and put it onto the ftp? Guess that'll be way easier than finding out some passwords to change the update-files?
thank you!
Why couldnt this be installed on non-swedish qtek s100?
Seems like an normal english rom-update
Wonder what it is with the bluetooth.
Cause the stack that is installed now is way to slow.
We need the passwords so xda3nbftool can be used to change operator id. Then we get past the Country id error...
So if anybody know the passwords that would be nice...
it cant be used out-of-the-box because the upgrade tools checks for your device-id, the carrier-id (which must be the one of qtek), the language (which, as you've said would fit) and the rom versions.
Thus, at least the carrier id would be different which is enough for the upgrade prog to abort. So there are 2 work-arounds:
1.) using xda3nbf-tool which requires the rom-passwords to decode the rom, change the parameters which are checked and re-encode the rom. Unfortunately anybody knows the passwords yet
2.) do a rom backup of a succesfully upgraded qtek-device with the bootloader-method which gives you *one* file that contains all the radio, the ext-rom and the os rom. This file needs to be modified by a hex-editor (which actually means to replace the first 412 bytes from the qtek-backup with the first byte of your own backup) --> restore the edited file et voilà: it should work. Unfortunatly anybody has posted such a backup yet...
conclusion:
way 2) is easier (at least we dont need any passkeys) nevertheless we still need that backup...
regards,
André
sorry, my upload was broken... should be ok now. the file is called MA_Qtek(BrPt)_10600_116_10500_SHIP.zip and you can find it in the Magician folder on the xda-ftp. it's basically just the unpacked installer.
could anybody tell me how to write a proper .bat file, like the one pinoo did for the i-mate rom? i suppose i need to change the 0x20040522... numbers to stop the installer giving the "invalid checksum" error?
...and reading the last post these numbers seems to be the passwords Guest was talking about...
any chance of getting them?
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
landau said:
BTW you can install Radio ROM without any passwords and xda3nbf. Just remove all other .nbf files from directory and run update - and everything is OK without any mistakes. Problems appears after other upgrades (nb and mk_).
Click to expand...
Click to collapse
Just upgraded my Imate Jam radio stack to this one and seems that it improved phone sound quality a lot or am I just hoping so ?!
However no problems with upgrading the radio stack only!
Hello,
landau said:
Be careful with this ROM. I tried to install it and now my Compact is dead . I can't reflash it anymore even from SD card. Tried everything and now it is in service-center. They are triing to fix it but still with no success ((
Click to expand...
Click to collapse
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
macrinus said:
Hope you can solve your Magician problem. Which file did you use to upgrade your PPC: MA_Qtek(BrPt)_10600_116_10500_SHIP.exe or MA_DANG_WWE_10600_115_10500_SHIP.exe.
Thanks
Click to expand...
Click to collapse
MA_Qtek(BrPt)_10600_116_10500_SHIP.exe
Seems like T-Mobile have brought out their second maintanance release, supposedly including blackberry (jumps up and down, then realises blackberry is overhyped and overpriced).
Downloading it now from
http://t-mobile.iris-global.com/download_manager_mda_com.html
From the filename it appears the radio stack is still at 1.12, but I'll check once it's on.
Apologies if this is old news but I couldn't find any reference to it so far.
Technology hates me
Computer decided to reboot during ROM flash, feck knows why. Luckily it seems the TMO upgrade utility can restart its flashing procedure even though connection was lost.
Don't mind computer problems if they got some kind of sense to them, but randomly just restarting for the first time since I built it during the most ackward time just proves to me that computers are both evil and have a since of twisted irony.
Any improvement
Any improvement in this release?
I have been using the May update (BigStorage applied) since July fairly successfully.
I don't want to go through this if it's not worth it, so would appreciate advice from anyone who has applied it first.
Thanks
Well it's now got Blackberry support, whoopty f***in do. Also the radio version is still 1.12 so that has to be updated seperatly. In the 15min its been alive I havn't noticed any major changes but never really expected to.
Will post if I experience any problems or notice anything lifechangingly amazing about this new ROM. Would be nice if people using this ROM could do the same.
BTW anybody got a list of the ExtROM files and their comparitve uselessness? I went through the 1.12 ROM with a CAB manager but really can't be arsed this time round. Probably just install the whole lot through shear laziness. On second thoughts the BB client takes up 1.3Mb, so like f**k am i letting that onto my baby.
Hi Herman,
Why not go for BigStorage as you're not using the ext-rom. In the upgrade to radio 1.13 you can find how to do it from the shipped rom & on the ftp there's a bs 1.13 rom present, based on the Dutch TMO version so WWE, but use your own ext-rom files for specific UK settings.
Cheers, M
Cheers
Sorry, didn't really put it right. Already had the 1.13 radio downloaded and just installed it after, was no worries there. As for the BigStorage ROM, I've never particularly liked the idea, especially after reading problems people have had reverting back to the old storage configuration. I'm quite happy with my 512Mb SD card, wouldn't really use the extra space in storage anyway.
Cheers for your thoughts though mate
Ps had the new ROM up and running for few hours now, not noticed any glaring issues apart from that damn lack of BT serial ports issue but thats the radio not the OS ROM.
BigStorage
Finally gave in and overcame my fears. Applied the BigStorage hack to the latest TMO ROM as I read on here that it's reversible. Well seemed to have gone smoothly, although the increased hard reset time at the begining nearly made my heart stop.
If anyone wants I can upload the latest TMO official ship (1.13) with BigStorage hack, which doesn't need the SD card flashing method. Can do straight over USB.
Just post a msg if you want me to upload.
herman3101 said:
Seems like T-Mobile have brought out their second maintanance release, supposedly including blackberry (jumps up and down, then realises blackberry is overhyped and overpriced).
Downloading it now from
http://t-mobile.iris-global.com/download_manager_mda_com.html
From the filename it appears the radio stack is still at 1.12, but I'll check once it's on.
Apologies if this is old news but I couldn't find any reference to it so far.
Click to expand...
Click to collapse
that doesn't work with my jam ... i still can't figure out how to update my ROM.
Re: BigStorage
herman3101 said:
Finally gave in and overcame my fears. Applied the BigStorage hack to the latest TMO ROM as I read on here that it's reversible. Well seemed to have gone smoothly, although the increased hard reset time at the begining nearly made my heart stop.
If anyone wants I can upload the latest TMO official ship (1.13) with BigStorage hack, which doesn't need the SD card flashing method. Can do straight over USB.
Just post a msg if you want me to upload.
Click to expand...
Click to collapse
i would love to have that...right now im experimenting some of the roms thats available. i would like to give it a try. please upload it here or on the ftp. thanks mate.
One thing, this EXT ROM is 1.13 128 while NL EXT 113 ROM is 131. Which one we should use??
Re: BigStorage
parklife said:
i would love to have that...right now im experimenting some of the roms thats available. i would like to give it a try. please upload it here or on the ftp. thanks mate.
Click to expand...
Click to collapse
Hi parklife,
Still strugling to get it done? I gues herman3101 will upload a modified nk.nbf. Hope you succeed with it. At least I did with a patched nk.nbf. Can't upload myself for a few days as I'm not in the neighborhood of my PC. It's just me & my magician and I'm not complaining.
Cheers, M
Uploading now
Well I'm uploading the ROM up to the ftp now. I've included the updated nk.nbf as well as all the files needed to do a USB install. The files were small enough for me to think well why not. Once that's been uploaded I'll check the download section and find a link for you all.
Further to the guy who couldn't update his ROM, being kinda vague there buddy but I'll see what I can do. If you would be so kind as to follow these instructions pretty much to the letter then we should be OK:
- Hard Reset your MDA (press power button at same time as reset)
- After the selecting your time zone do a soft reset to avoid the customization process
- Plug your fresh MDA into your USB and wait for ActiveSync to bring up the connection wizard, select Guest partnership
- With your MDA still plugged in but in Guest mode just double click on the file you downloaded of T-Mobile and follow the onscreen instructions.
If you still have problems after following those steps then don't hesitate to reply but please be more specific so we don't have to guess what your issue is.
Will post a message when the BS ROM is up on the ftp
PS Well with the BigStorage ROM it obviously doesn't matter which ExtROM, but I would always go for the one from your provider so if you are with T-Mobile UK then go for their ExtROM because your guarenteed compatibility
Link to the ROM
ftp://xda:[email protected]/Uploads/Magician/WWE_TMO_1.13 Official Release with BS.zip
ftp://xda:[email protected]/Uploads/Magician/
The first is a direct link which probably won't wok because of the way I named the file and the second is a link to the folder which it is in.
I have to be honest I have no idea how to move this ROM into it's appropriate folder under Magician/BigStorage ROMs but o well. You'll find it where I've specified.
BTW the file attached is a list of my interpretations of what the 1.13 ExtROM files do. By no means conclusive or correct, its just what I've noticed them do during a stage by stage install and looking for clues inside the cabs.
herman3101,
Album & camera are bundled in the cab. That's the only flaw I noticed in your nice description.
Probably a moderator will move your file to the download section. Guess that's what happened to my BS rom as well. Thanks for uploading your files. It takes me ages to upload those files with my magician.
Good work & seems you're right on my track with decisions making for BS. Only I messed my first try completely and that's something I'm not wishing to anyone. Just waiting for the first hard-reset to finish is enough I think.
Regards, M
Re: BigStorage
oltp said:
Hi parklife,
Still strugling to get it done? I gues herman3101 will upload a modified nk.nbf. Hope you succeed with it. At least I did with a patched nk.nbf. Can't upload myself for a few days as I'm not in the neighborhood of my PC. It's just me & my magician and I'm not complaining.
Cheers, M
Click to expand...
Click to collapse
oltp, i tried your ROM, everything works fine, but it seems the clock stuck on 24 hour format, usually i can change it into 12 format just like i want it, but the Dutch ROM seems did not offer 12 hour format. But i trully appriciate your time and effort fot uploading the ROM
thanks oltp.
Re: Uploading now
herman3101 said:
- Hard Reset your MDA (press power button at same time as reset)
- After the selecting your time zone do a soft reset to avoid the customization process
- Plug your fresh MDA into your USB and wait for ActiveSync to bring up the connection wizard, select Guest partnership
- With your MDA still plugged in but in Guest mode just double click on the file you downloaded of T-Mobile and follow the onscreen instructions.
Click to expand...
Click to collapse
hey herman, thanks for the upload, i got it to work on my M500. But i would like to add something on the set up. You need to do some extra steps to avoid the the ID ERROR 120. Ok here ya go:
-Extract the rom
-edit the RUU.conf with notepad, add [CHECKCEID_TYPE]=1 on the top
-copy MaUpgradeUt_noID.exe from ftp to the extract folder
-press power, camera and rest on your magician
-plug the magician to the USB
-AND execute the MaUpgradeUt_noID.exe
-follow instuction
I waited for 4 minutes till i got my welcome mode.
for more info go check on the ampda how to's pdf file
thanks for herman3101, oltp, and ampda, now i have the perfect rom that i will keep for some time.
Hey Parklife,
Glad you finally made it. Don't think the Dutch rom is any different from the UK rom, both are 1.13 WWE TMO. Except for the ext-rom ofcourse. Managed to get my time on 'h:mm am' too with the english (us) region.
Good thing is that everyone can choose of three methods, to get this BS rom, whichever way they're feeling most comfortable ith and that has been different before.
Cheers to all of you.
Re: Uploading now
parklife said:
hey herman, thanks for the upload, i got it to work on my M500. But i would like to add something on the set up. You need to do some extra steps to avoid the the ID ERROR 120. Ok here ya go:
Click to expand...
Click to collapse
Cheers for complementing the post, didn't include it because my MDA is from TMO UK so I don't need to do that step.
PS I've been running the ROM for a little while now and it seems as stable as ever
hey, one more question for you guys...after i install the Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.CAB, my magician clock changed into 24 hours clock format. I tried to change it into 12 hours format on regional setting - date like oltp said, but could not change it back to the 12 hours format...have you guys had the same problem? no biggies, i just not use to the format.
Parklife,
I noticed that the clock changes only after I alter the 'time style' on the time tab (sample changes immediately) go to another tab and then touch the clock on my programbar. Changing the region seems not necessary. Yesterday I fiddled a bit with the settings, now I used a more structural approach.
Cheers, M
i've heard that WM2003 in himalaya gadget can be uprade to WM2005, it's very interesting and i going to try the uprade, but i have some question about the upgrade, my question is:
1. what's the risk during upgrading? could my device occuring some permanent error?
2. what's the consequence of this? will my device working slower? or working faster?
3. if i don't satisfy with the WM2005 can i downgrade back to the WM2003 OS?
please help me by answering my question
Response:
1. the device may fail, but you can restart the whole process entering the device in bootloader mode and upgrading (happen to me once)
2.Your device will work Faster but sometimes (at boot sequence) will be slower.
that's the price you have to pay. Other thing is there is no MMS in WM5 (dont work for me) and some camera issues, that can be fixed. But is more eye-candy than the WM2003 or 2003SE.
3. If you aint satisfied you can go back to 2003SE just putting the device in bootloader mode and then making the upgrade using a WM2003 ROM (the nbf file)
One thing: Tofclock and Buzz (thanks guys!) are working hard to bring us one stable, better and faster WM5 ROM, so be quiet and wait like me :wink:
Hi guys,
I ve also heard that after you upgrade to Wm 5.0 the phone vibratin wont work, is that true?
what else then?
:roll:
Thanks
Hi dickyw,
my vibration on my Himalaya works perfect...
Hi Guys,
Can anyone help another dumb newbie?
I upgraded my Himalaya to W2k5 OK from the O2 exe file, but I now want to downgrade to 2003 SE.
The folder I am trying to use to downgrade is WindowsMobile2003SE_XDA2_2.20.00CHS-translated.zip
Himaupgradeut.exe gives:- Error 120 Country ID error 1-1-8-n-1
HimaupgradeUt_noid.exe gives:- Error 103 ROM image file not found
XDA image tool gives me:-Unsupported file format error for NK.nbf
I have:-
Boot loader 1.06
CE image 1.72.00
Extended image 1.72.181
Radio image 1.17.00
Am I using the wrong tools, the wrong ROM or an incorrect procedure? I'm doing this for a friend so it's getting very embarassing. Any advice would be gratefully appreciated.
Thanks, Mike
Another issue to aware of when upgrading to WM5 is that you need to also upgrade to Activesync 4.1 as 3.8 won't work any more. Given that AS can be very tempremental it may take some time to get the sync link back up and working to your satisfaction so if your data is cruitial to your work then backup, backup, backup and upgrade when you have a few days free to dedicate to ironing out any wrinkles.
Then also xbackup doesn't work in WM5 so you are left with options like buying the latest Sprint backup soiftware (now WM5 compatible) or relying upon your PC Outlook to be your "backup data" (NB I use the Outlook free "backup" util to back up my pst files on exiting Outlook as double insurance).
Regards - Mallow1
PS I upgraded and v glad I did. Had a few AS issues but eventuall got there (took a lot of reading of forums and As battles, but worth it in the end)
cnimike,
One assumes that you have unzipped the zip file first before trying to reflash? If not try that (say use winzip). Also try reading the wiki as a guide to what to do (seee link attop left of page).
You are also best o use the HimaupgradeUt_noid.exe as at least it avoids the first error (esle you'll have to edit the flash files first and recompile them which is straight forward but if you are a noobie it's a step that can be avoided by using the "...noid.exe") and if you haven't unzipped the said file doing that may well sort out your second error.
Get back to me if you need more help.
Regards - Mallow1
cnimike said:
The folder I am trying to use to downgrade is WindowsMobile2003SE_XDA2_2.20.00CHS-translated.zip
Am I using the wrong tools, the wrong ROM or an incorrect procedure? I'm doing this for a friend so it's getting very embarassing. Any advice would be gratefully appreciated.
Thanks, Mike
Click to expand...
Click to collapse
I would suggest getting a hold of Sin's merged version (details in signature) or XDA2JoJo's version. Simply flash the ROM and you are there. Elsewhere, SIN has set out the steps in the most detailed fashion you are going to see outside a software manufacturer's manual. :wink:
Hi I am new to all this.
I have an XDA EXEC, copied the T-mobile rom all works fine...except thebusual crap GPRS/3G reception.
I was looking at installing WM6 today....
Which file is the best/most stable at the moment there are many threads with many updates etc..
What do I gain by upgrading to WM6..
I am sure I am not the only one to ask this question
I to have an xda exec looking to install WM6 it is an old one from o2 since i only hear new ones can have WM6. So please help me to obatin the right file or rom as people have called it, i have done a search and found a few things related to WM6 but not sure whats stable and right to use before bricking my xda exec.
badman112 said:
I to have an xda exec looking to install WM6 it is an old one from o2 since i only hear new ones can have WM6. So please help me to obatin the right file or rom as people have called it, i have done a search and found a few things related to WM6 but not sure whats stable and right to use before bricking my xda exec.
Click to expand...
Click to collapse
Hi there
If the instructions are followed as written, it would be quite hard to brick your device.
As a start you could try Jwright's WM6 rom version 2.02.02, works great for me & I don't have any wifi bug (I use wifi a lot).
I say it's a good starting point as it is an executable upgrade (make sure to d/l the correct one for your device) just like the OFFICIAL roms, only it installs WM6 instead of WM5.
Download that one and give it a go.
That rom is very simple to install as it is a single executable file, with the whole package contained within.
All I did was
D/L the ROM for my device (jwrights 2.02.02, locate it in the forum).
Unrar it somewhere to my pc.
Put device into bootloader mode (power,backlight & reset) a screen with no backlight appears with the words serial vx.xx (x.xx being your version of the bootloader) you may need a torch to see it.
Connect device via usb.
Execute upgrade (file that you unrared to pc)
Once finished (about 20mins or so), unplug device & perform a hard reset (both softkeys & reset until the white option screen appears) and select "Restore" from the options. I believe it's 0 (zero).
This also upgrades your radio rom to the latest V1.15.
Happy bricking!
OOPS I mean upgrading.
Hi,
I've just upgraded my mda pro to wm6.1, specifically 3.2 thingonaspring.5.2.1933.18533.REALVGA
On start up or reboot, I get two pop up box errors.
ssdamon.exe
"THE FILE "SDDAEMON" CANNOT BE OPENED. eITHER IT IS NOT SIGNED WITH A TRUSTED CERTIFICATE, OR ONE OF ITS COMPONENTS CANNOT BE FOUND.IF THE PROBLEM PERSISTS, TRY REINSTALLING OR RESTORING THIS FILE"
elatepushservice.exe
The file elatepushservice.exe can not be opened .....
I've tried reflashing and cold reboots, but its still the same. The other functions work fine as far as I can tell.
Also I think the mda pro has retained some of my old settings, i.e. it has remembered the outgoing call duration, even after the rom upgrade ! Is there a way of clearing this info ??
Can any one help ?
Thanks
fs
Try finding the cab "sdkcerts.cab" to disable certificate checks and try it else reflash the rom once again and try.
fyi, the rom you're flashing is a WM6.0 build and NOT wm6.1
Fix?
Had the same issue, but it was related to a file that was removed from the windows directory search the ROM thread I think the file was something like olce?.dll to confirm its the same issue try installing isilo and see if the same error happens.
Hi guys where is Thingonaprings 6.1 ROM I didn't relise he'd released on?
No, he’s just confused between WM 6.0 and WM 6.1 it did take me a while to realize I am not superman too.
WizP said:
Hi guys where is Thingonaprings 6.1 ROM I didn't relise he'd released on?
Click to expand...
Click to collapse
firestormer said:
Hi,
I've just upgraded my mda pro to wm6.1, specifically 3.2 thingonaspring.5.2.1933.18533.REALVGA
On start up or reboot, I get two pop up box errors.
ssdamon.exe
"THE FILE "SDDAEMON" CANNOT BE OPENED. eITHER IT IS NOT SIGNED WITH A TRUSTED CERTIFICATE, OR ONE OF ITS COMPONENTS CANNOT BE FOUND.IF THE PROBLEM PERSISTS, TRY REINSTALLING OR RESTORING THIS FILE"
elatepushservice.exe
The file elatepushservice.exe can not be opened .....
I've tried reflashing and cold reboots, but its still the same. The other functions work fine as far as I can tell.
Also I think the mda pro has retained some of my old settings, i.e. it has remembered the outgoing call duration, even after the rom upgrade ! Is there a way of clearing this info ??
Can any one help ?
Thanks
fs
Click to expand...
Click to collapse
Hi,
Just remove sddaemon.lnk from windows/startup folder.
(when in doubt, just paste this file elsewhere)
greetings,
Wout
I am getting the same thing. None of these "fixes" has any effect whatever. I thought this was a thread full of knowledgeable persons. Why all the stab-in-the-dark answers? Doesn't anybody know what REALLY causes this trouble?