Related
New German HTC Magician/MDA Compact rom have been uploaded to Magician section on FTP.
ftp://xda:[email protected]/Magician/Shipped_ROMS/
Enjoy
Does anyone have access to windowsmobile.it?
http://www.windowsmobile.it/
05.010.2005
Available new ROM for Qtek S100
E' available in the area of download upgrade of the device new ROM for the Qtek S100. optimizes the operation of the Bluetooth of the camera and installs one new version of client the MMS. has been dawns to you, moreover, the driver of the panel touch screen and has been improved the translation of the error messages. The possessory ones of the Qtek S100 can unload the modernization after to have carried out the authentication from
___________________________________________________________
Can someone check qtek.nl for new ROM also?
Moved the files in the "Fixed" part of the ftp.....
Where have you found this ROM? A short look at the t-mobile page didn't show any news about this ROM.....
Have you noticed any improvements of the ROM?
By the way:
Do you now a way to mount the Extended ROM -File under linux?
Stefan
You can cut header from decrypted ms_.nbf file and mount it as disk image.
http://www.t-mobile.de/business/blackberry/software/1,7968,11445-_,00.html
@LumpiStefan:
http://www.t-mobile.de/downloads/blackberry/ma_tmde_11301_129_11200_ship.exe
http://www.t-mobile.de/business/blackberry/software
;-)
calvinandhobbes said:
@LumpiStefan:
http://www.t-mobile.de/downloads/blackberry/ma_tmde_11301_129_11200_ship.exe
http://www.t-mobile.de/business/blackberry/software
;-)
Click to expand...
Click to collapse
But the issue here is Blackberry. This isn't a ROM upgrade, is it???
This is a ROM update package.
Any ideas what actually happens to the rom?
Extrom looks to me like blueberry is integrated; seems to be settings for austria though. Confirmations on that?
Greetings
i just installed the new rom... works fine so far... but i'm missing something.
if a gprs connection is established, than there is no disconnect button... is there a trick to get this button back?
@tko
to sort out that problem i once found the following :
Orange_GPRS_Desconnect.sa
It`s a .cab file, once installed the disconnect works fine again!
Greetings
download here:
nice thax
This ROM upgrade works fine for me too. But I haven't installed anything from the Ext_ROM yet (on purpose).
works also quite nicely on my device, i only installed the new Camera Program from the Ext Rom, nothin' else.
BigStorage
Anybody tried to apply the BigStorage Hack with this BB-Update ?
Cheers
hrb
@hrb: You're probably unable to read... so no further sense in making it any clearer for you WITH WORDS.
As above, just follow the link Would've attached it but it kept failing to upload. If somebody could download and then attach to a reply, I'll link to it in this post
LINK
Enjoy
Phil
PLZ, make a mirror on other file service! There is no possibility for russian users to download from this {censored} MEGA
Here is a link for those who cannot download from Mega,
http://rapidshare.com/files/30158140/OFWM5.cab.html
Did not install on my SDA. I think this is really for WM6. When you choose location to install it states "OfficeWM6 WCE.BY"
Worked fine for my 8310 running WM5. Your phone needs to be app unlocked.
Phil
working on my t-mobile sda running on qtek 8300 rom
excellent working on my i-mate sp5 storage card
It does work, I had forgotten that I just did a cold boot a couple days ago and did not appunlock from then. Thanks OP for the program.
It worked on mine ( for sure ), thanks for sharing it
Pocketword files?
Hi all, many thanks for sharing this, this is the only function I missed changing from wizard to tornado - much improvement over clearvue!
has anyone managed to get it to read pocketword .psw files?
OpenOffice will only convert its native sxw files to psw and I would really rather not have to change my default format change back to .doc
strangely, pocket exel files seem to work fine...
any help much appreciated
Robert
Hi!
Could someone please resend this file to RShare or upload here?
Many thanks,
JG
jm012a9749 said:
Worked fine for my 8310 running WM5. Your phone needs to be app unlocked.
Phil
Click to expand...
Click to collapse
who can I can my phone App unlocked????
thx for ALL these replies
I found.
the links are broken. can anybody supply a working ling?
thanks.
who can I can my phone App unlocked????
i have a i-mate sp5m, and it does not install some programs and says not enough system permisions.
help.
Hey guys I am currently using the Black Diamond 2.0 rom and since I have installed it, my gprs, edge, and wifi will not work.
Is there a cab file that will repair this or am I stuck with no internet on my WIZARD untill I change the rom again?
I noticed that when I used NBD 8.3 that there was an auto config network settings when I first booted the phone for the first time. Is there something like that that I can get for BD2.0?
Please help. I am desterate. Thanks in advance.
Dan.
Assuming that you are on T-Mobile US Try going to this link and it will tell you how to configure all your settings. - http://www.gruups.com/tzones/ There are a whole lot of other posts on XDA that tell you how to do it also, but I had this page bookmarked frow way before I started coming here and the settings are right. There's also cab files around here that will do the settings for you if you look for them.
I actually found a cab file that automatically set up all of that. Thank you though
In the future, if your question is directly related to an existing ROM, post it in that ROM's thread instead of starting a new thread. It's always better to post in an existing thread than to start a new thread.
dharvey4651 said:
Hey guys I am currently using the Black Diamond 2.0 rom and since I have installed it, my gprs, edge, and wifi will not work.
Is there a cab file that will repair this or am I stuck with no internet on my WIZARD untill I change the rom again?
I noticed that when I used NBD 8.3 that there was an auto config network settings when I first booted the phone for the first time. Is there something like that that I can get for BD2.0?
Please help. I am desterate. Thanks in advance.
Dan.
Click to expand...
Click to collapse
assuming you have T-Mobile, check my rom, at the end of the first post you'll see t-mobile pack, install the connection setting cabs from that pack
Thank you guys for all of your help. Next time I will post under the specific rom's thread.(My apologies)
I'm looking for the Connection Setup 3.0 cab file or a build that recognizes Claro as Carrier and Puerto Rico as Location. I recently flashed to a newer ROM which had the Connection Setup 3.0 and it did the work, but had to reflash to older ROM because I was having problems. I actually searched for the file but the only thing I found was the package and I don't know how to convert to cab file. I really need to have the connection settings for Claro. Hope someone can help me.
try here diaduit.trg.ru/ if the link doesn't work search for diaduit roms and the link is on his signature. hope that helps.
Thanks
I downloaded. Will try and then inform.
Many thanks
I have extracted and packed the ezinput files from WWE Asia ROM, which has Chinese input support. I did this in preparation for my custom ROM flash, since most, if not all, of the cooked ROM are based on Europe/UK WWE and therefore the cooked ezinput would not have the Chinese support.
I've yet to try this on any cooked ROM, so if anybody can try and see if this works I would be most appreciated
NOTE: I've taken down the CAB because it's not working so it's back to drawing board for me.
http://www.4shared.com/file/188803152/4fc9335c/dZenKinZ_ezInput__with_Chinese.html
zenkinz said:
I have extracted and packed the ezinput files from WWE Asia ROM, which has Chinese input support. I did this in preparation for my custom ROM flash, since most, if not all, of the cooked ROM are based on Europe/UK WWE and therefore the cooked ezinput would not have the Chinese support.
I've yet to try this on any cooked ROM, so if anybody can try and see if this works I would be most appreciated
NOTE: I've taken down the CAB because it's not working so it's back to drawing board for me.
http://www.4shared.com/file/188803152/4fc9335c/dZenKinZ_ezInput__with_Chinese.html
Click to expand...
Click to collapse
Bro , i hope you can make this work , cause i think most of the ppl will be much appreciate !!! Keep it up .
buddy, i need it.
hope we can figure out and make a CAB for it.
good luck lol
zenkinz, no hurry.
Being waiting for it.
zenkinz said:
I have extracted and packed the ezinput files from WWE Asia ROM, which has Chinese input support. I did this in preparation for my custom ROM flash, since most, if not all, of the cooked ROM are based on Europe/UK WWE and therefore the cooked ezinput would not have the Chinese support.
I've yet to try this on any cooked ROM, so if anybody can try and see if this works I would be most appreciated
NOTE: I've taken down the CAB because it's not working so it's back to drawing board for me.
http://www.4shared.com/file/188803152/4fc9335c/dZenKinZ_ezInput__with_Chinese.html
Click to expand...
Click to collapse
I've just looking for this! Can anyone please help!
zenkinz said:
I have extracted and packed the ezinput files from WWE Asia ROM, which has Chinese input support. I did this in preparation for my custom ROM flash, since most, if not all, of the cooked ROM are based on Europe/UK WWE and therefore the cooked ezinput would not have the Chinese support.
I've yet to try this on any cooked ROM, so if anybody can try and see if this works I would be most appreciated
NOTE: I've taken down the CAB because it's not working so it's back to drawing board for me.
http://www.4shared.com/file/188803152/4fc9335c/dZenKinZ_ezInput__with_Chinese.html
Click to expand...
Click to collapse
I've been looking for it for a long long time ago...
but i cant find any workable CAB of it.
so thats why i still keep my LEO as default 1.48 ROM..
and now, Thanks for your hard working,
I can try the newest 2.01 ROM.
I *think* I might have found the problem but I need to flash a custom ROM to test it. If anybody is game to try it on their custom ROM, please pm me your email address and I'll send you the CAB. The reason why I'm not publishing it here is because it might cause you to hard reset your phone if it didn't work out (as happen to one of the 'early adopter' user)
zenkinz said:
I *think* I might have found the problem but I need to flash a custom ROM to test it. If anybody is game to try it on their custom ROM, please pm me your email address and I'll send you the CAB. The reason why I'm not publishing it here is because it might cause you to hard reset your phone if it didn't work out (as happen to one of the 'early adopter' user)
Click to expand...
Click to collapse
I'm looking for a RIGHT ROM to try.
I'll let your know when i'm ready.
ok, I'm trying a second time. The CAB can be downloaded from here
WARNING: uniinstalling this CAB might require your device to be hard reset. I suspect it's because of the default SIP being removed when the CAB is being uninstalled. But I don't have a custom ROM to test, so if you don't mind the risk, I would appreciate your help in testing.
zenkinz said:
ok, I'm trying a second time. The CAB can be downloaded from here
WARNING: uniinstalling this CAB might require your device to be hard reset. I suspect it's because of the default SIP being removed when the CAB is being uninstalled. But I don't have a custom ROM to test, so if you don't mind the risk, I would appreciate your help in testing.
Click to expand...
Click to collapse
I volunteer to try your cab, and report back soon!
I've tried it, but it didn't work. when inputting sms contact names, no name suggestions available. and the Pin Yin didn't work at all. And when I tried to uninstall and reset the device, the whole device couldn't boot, I was forced to hard reset my HD2.
precsmo said:
I've tried it, but it didn't work. when inputting sms contact names, no name suggestions available. and the Pin Yin didn't work at all. And when I tried to uninstall and reset the device, the whole device couldn't boot, I was forced to hard reset my HD2.
Click to expand...
Click to collapse
I was having the same problem as well . Hope there will be a refine version .
zenkinz said:
ok, I'm trying a second time. The CAB can be downloaded from here
WARNING: uniinstalling this CAB might require your device to be hard reset. I suspect it's because of the default SIP being removed when the CAB is being uninstalled. But I don't have a custom ROM to test, so if you don't mind the risk, I would appreciate your help in testing.
Click to expand...
Click to collapse
I tried it on PDAVIET V05 28014
I can call it out but the hand writing does not show the line when you draw on the screen, when using the 筆畫 it just show the E T U D G instead of chinese.
ok so it looks like I really have to use a custom ROM to test myself, as my fear is that the existing registry in the pure english rom conflicts with the CAB.
this will take awhile unless somebody adventurous could trace the original ezinput registry and identify any potential conflict to the chinese input. (but doing so will also mean you will need to hard reset ur device after the troubleshooting)
Hi, zenkinz
Thanks for your effort.
Can you create a tutial or CAB for LEO custom ROMs (like Dutty's, Xanny's ......) to add Asia support? (just capable of viewing, not UI localized)
You can try to analyse the cabs from Lingvosoft, as they offer asia input keyboards.
I am using their Japanese Keyboard. This will show up the keyboard.
But the keyboard alone is not enough, you need copy a chinese font from your desktop windows to the windows\fonts folder on your Leo.
Then you will have to change the standard font in HTC manilla or Windows 6.5 if you want to be able to display the characters in the main applications (unless that application offers font selection).
I have attached the Chinese and Japanese keyboard cabs, as well as the Chinese font (ming true type font). Those are from the trial version of their translation suit, but I think the keyboards don't require a license (except for use in the translation application, then they get barred).
zenkinz said:
ok so it looks like I really have to use a custom ROM to test myself, as my fear is that the existing registry in the pure english rom conflicts with the CAB.
this will take awhile unless somebody adventurous could trace the original ezinput registry and identify any potential conflict to the chinese input. (but doing so will also mean you will need to hard reset ur device after the troubleshooting)
Click to expand...
Click to collapse
sorry to say that my voluntary offer ends there. The problem is if there is a problem, I cannot uninstall it and revert to previous state, and also, worse is, the entire rom couldn't start. I can't take too much trouble to try it unless it can be reverted easily.
precsmo said:
sorry to say that my voluntary offer ends there. The problem is if there is a problem, I cannot uninstall it and revert to previous state, and also, worse is, the entire rom couldn't start. I can't take too much trouble to try it unless it can be reverted easily.
Click to expand...
Click to collapse
the following file is come from one Taiwan WM site,
anyone if have interest, can try it out.
seem that someone work fine with the file.
http://www.badongo.com/file/18581778
if you can read chinese, you can check with the following link,
also discussing about the Touch Input 2.0
http://www.mobile01.com/topicdetail.php?f=129&t=1317192&last=16027178
cmant said:
the following file is come from one Taiwan WM site,
anyone if have interest, can try it out.
seem that someone work fine with the file.
http://www.badongo.com/file/18581778
if you can read chinese, you can check with the following link,
also discussing about the Touch Input 2.0
http://www.mobile01.com/topicdetail.php?f=129&t=1317192&last=16027178
Click to expand...
Click to collapse
thanks for the link. From the thread, it looks like the thread start has the same problem as us, I will read further to see what's the missing dll/registry.