hi i have installed microsoft voice command on my 8125 and i'm missing the voice dialing on my 8125 is there a cab i can install so i can get back voice dialing.
I wanna use voice command threw my bluetooth
thanks
Related
hi guys its me.. i just found out that when i used and installed the voice command from microsoft the intellipad for text msging wont work.. any help for that?? i just uninstalled the voice command and the intellipad came out working fine.. but my problem now is how do i work the two software for my xda.. tnx!
I've found I have this problem too.
What I do is this:
1) After a soft-reset, I disable Voice command from Settings->Personal->Voice Command - de-tick "Enabled"
2) select my preferred input method
3) Re-enable Voice command.
This works if you stick with one input method.
Hi!
I upgraded my HTC Wizard to WM6 using "S.N.E 3 Codename: Touch No Evil". ROM is great but I have one single problem. I cannot make my bluetooth hands free to activate voice dialing. This feature worked fine with WM5. I tried many things, including playing with the registry.
Do you have anything to recommend?
I guess I'm the only one with this problem!
What program are you using for voice dialing?
I am using Cyberon Voice Dialer.
Actually I discovered that I also have a problem receiving incoming calls by pressing the button of my hands free. The call is accepted but disconnected after a few milliseconds. The only way to make a call with my hands free is to start the call using the phone. For incoming calls my hands free does not work.
All these things was working with WM5 though.
I hope I won't have to get back to WM5!
Im sure is the OEM build of the cook. Why dont you install the cyberon voice dialer over. You can find this cab in the latest TNT thread.
Best regards.
Solved! Thanks, searching that ROM's threads.
Actually I'm using the latest release published by Cyberson. I was just missing the second of the following registry settings:
HKLM\SOFTWARE\OEM\VoiceCommand\Path = "\Windows\SDDialer.exe"
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule = "OEMAGW.dll"
Phone: Eten X500 / WM6
Headset: Jabra 250v
Program: Cyberon Voice dialer 1.2
How do i make this to work? I whant the bluetooth button to activate Cyberon but now when i press the button the dialer opens and not cyberon...
Is there any fix for this like a regedit?
And No i dont whant to use MS Voice Command becuse it don't understand swedish.
I have same problem with my Trinity, MARY 3.4SL ROM and Plantronics headset. Search forum doesn't found anything. Can't believe that only two people have this problem.
I fixed this problem. This is cab file:
Cyberon Voice Dialer and Speed Dialer PTT button reassign for AT&T Tilt
Guys, would this "fixed" Cyberon Voice Dialer cab solve my following problem?
I have the AT&T Tilt and of course want to reassign the PTT button for my voice tags speed dialer, but when I installed the following my Motorola H700 Bluetooth headset no longer worked with my Tilt speed dialer. (The reassigned PTT button worked for speed dialing, but the Motorola H700 no longer worked). Here is what I first installed:
1) Cyberon Voice Dialer cab(Cyberon VD for WM6_v1.2build_61226_1.cab)
2) PTT_Fix_4Tilt
3) OEM_Assign_PTT_Button cab
So, to summarize, would this new fixed Cyberon Voice Dialer cab solve my problem with the Motorola bluetooth connecting to my Tilt speed dialer? And, I also want my PTT button to be reassigned for my Tilt voice speed dialer also. (PS. I don't want to use MS Voice Command, but rather I want to keep using my Tilt voice speed dialer.)
Additional Note: When I tried the above three installs the first time, and found my Motorola H700 no longer worked with my Tilt's voice speed dialer, I had to do a hard reset (factory reset) to get my voice speed dialing working again with the Motorola H700, and therefore had to re-install all my programs again! So, I want to really make sure this fixed Cyberon cab will work before I attempt this sort of thing again.
(I apologize, but I'm a newbie at this.)
Thanks so much in advance!
I trying to do things the other way around on my AT&T Tilt (TyTN II).
I am using a ROM which has Voice Command built into it, and MVC works well for voice dialing if your contacts have English names, which I don't have. So, i went ahead and disabled MVC (can't uninstall as it is built into the ROM) and installed Cyberon Speed Dial which allows me to use my own voice tags to do the calling.
everything is ok, but the only problem is that i can't find away to start cyberon by pressing the BT headset button. all solutions i found on this and other forums were for the other way around (using MVC instead of cyberon)
Any ideas?
Hey guys
Just bought a vox and download VC 1.6 and I can't get the Caller-id announcing to work, when people call, I hear the ringtone and thats it....
I checked the setting and the voice commands concerning the voice button work just fine. Any help?..... or people with the same problems? Thanks!
Same problem here , any solutions
http://forum.xda-developers.com/showpost.php?p=1548114&postcount=5
try that
These files are for windows mobile professional and not smart phone version . Has anyone tried these on VOX
Hey fellow Raphael users
I have always been using original rom with Cyberion Voice Speed Dial with my Blutooth car stereo.
I could hit the voice dial button on the stereo, Cyberion voice speed dial popped up and I could say a name etc etc....
I then decided to flash a custom ROM, I tried EnergyROM 3 (WM 6.5) with MS Voice command. Even then, I could hit the voice dial button and MS Voice Command launched.
But I didn't like MS VC, so I reflashed again with EnergyROM 3 without MSVC and installed the Cyberion VC from here:
http://forum.xda-developers.com/showthread.php?t=296337
Cyberion Voice speed dial works fine, but I can't use the voice dial button, the app just doesn't launch. I checked the registry setting in above thread, they seem all fine.
Is this an issue with 6.5? Did anybody successfully installed CVSD with BT button working?
Help please
storm
OK, I solved this:
This is what I tried without success:
-Changing registry values to call SDDialer.exe / OEMAGW.DLL instead of Voicecmd.exe / btagext.dll
-Overwrite OEMAGW.DLL / SDDialer.exe with versions from original ROM
-Installed update from Cyberion which should fix BT Button
-Installed EnergyROM 3.0 with MSVC and installed CVSD and tried all of the above again
-Searched the registry for other keys containing Voicecmd.exe
Nothing of this helped. What I did to solve it:
Use Resco Explorer to copy SDDialer.exe to Voicecmd.exe (accept warning about ROM file) and it works....
I really don't see why the registry changes didn't help, it looks like Voicecmd.exe is hard coded somewhere (registry settings have no effect)
I hope this helps somebody else who wants CVSD instead of MSVC
storm