Hi!
I upgraded my HTC Wizard to WM6 using "S.N.E 3 Codename: Touch No Evil". ROM is great but I have one single problem. I cannot make my bluetooth hands free to activate voice dialing. This feature worked fine with WM5. I tried many things, including playing with the registry.
Do you have anything to recommend?
I guess I'm the only one with this problem!
What program are you using for voice dialing?
I am using Cyberon Voice Dialer.
Actually I discovered that I also have a problem receiving incoming calls by pressing the button of my hands free. The call is accepted but disconnected after a few milliseconds. The only way to make a call with my hands free is to start the call using the phone. For incoming calls my hands free does not work.
All these things was working with WM5 though.
I hope I won't have to get back to WM5!
Im sure is the OEM build of the cook. Why dont you install the cyberon voice dialer over. You can find this cab in the latest TNT thread.
Best regards.
Solved! Thanks, searching that ROM's threads.
Actually I'm using the latest release published by Cyberson. I was just missing the second of the following registry settings:
HKLM\SOFTWARE\OEM\VoiceCommand\Path = "\Windows\SDDialer.exe"
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule = "OEMAGW.dll"
Hi,
I have noticed that I am no longer able to answer incoming calls via the Samsung HeadSet (I mean the cable headset that comes with the I-600). When an incoming call arrives and I push the button on the cable of the headset, the light goes on, but that's it.
I have done a hard-reset and voila: the headset could answer incoming calls again!
After having re-installed all my programs, the headset again does not accept the calls.
As I have so many programs on my I-600 it does not make sense to name them all. But does this ring a bell with any of you experts? Maybe someone encountered the same problem and found a solution?
Does any known program interact with that call acceptance button? Any registry entries I should change?
TIA for your help!
hi there I have the same problem too
I haven't found the hack but I just got the following ideas:
in the stettings activate the any key answer
and if it doesn't work again try with using auto answer function
I can't test now on my i600
BTW among your programs is there anything like flash get (download manager), 3D games, office editing application?
yes, I have Documents To Go and S-Tris 2
But the answer with any key and/or auto-answer option is no real solution
But still thanks for your input.
Maybe anyone else can come up with an idea?
TIA
Hey Guys,
I have an issue with my Fuze and am hoping there is a simple setting that may help me out.
I have an Xlink Bluetooth gateway in my home, and have a Jag XK with bluetooth. Previously I had an 8525 where the bluetooth worked well.
I got the Fuze and I thought all was well. But for the last week, when I get an incoming call the blue tooth rings (houseline on XLink or XK Radio), but when I connect the call I get dead silence.
I can make outgoing calls via bluetooth and both devices work fine.
On the Fuze, if when ringing i hit answer on the phone, rather than the car stereo occassionally it connects.
Since I have the same issues (silent connection) when connecting via Xlink or XK I figured it must be an issue with the phone.
Any thoughts or ideas ?
Thanks
Dave
The issue is with Voice Command not with phone. If you update Voice Command to 1.6.19209 it will fix your issue. The other option is to turn off Announce incoming Calls option.
Update Voice Command
The phone has version 1.6.19971 --- So that would be a downgrade not an upgrade....
Does that still make sense ?
Dave
You've tested that specific version and it works? NATF said he tried his version from his Tilt and it didn't work. Please confirm!
Nice work!
You guys are really on it! I started noticing this problem today after enabling 'announce incoming calls' yesterday... didn't even occur to me. So I disabled it as per your suggestion, and it's working fine. Thanks very much for that. If I wanted to roll back to that earlier version, where could I find it? I still have my Tilt which I upgraded to 6.1 (battery's probably dead)... could I get the .cab off of it? Do we know for certain the earlier version works? Thanks again.
We were on it for a long time. You'll see multiple posts about that.
Is there any possibility to get MSVC working on Diamond 2? I used it on my old O2 XDA Orbit 2 with Bepes Rom. Now I'm interested in to use it on my Diamond 2, or should I wait for official Update on Windows Mobile 6.5 with "TellMe" ?
I managed it, but it does not work and caused a problems (i.e. once connected to BT, it always stays connected).
Working fine on mine through bluetooth, I'm using V1.6.19214 found in a link here on XDA. I don't bother with the call button activation, which can be problematic to get working, as I only need it for voice dialling through my BT headset.
hmm, okay... thanks for the reply...
i just wanted to use it for incoming calls, so that the callers name is outspoken and for simplyfying writing sms...
I think i will wait for "tellme" in wm6.5
THX guys
eatmyshorts said:
hmm, okay... thanks for the reply...
i just wanted to use it for incoming calls, so that the callers name is outspoken and for simplyfying writing sms...
I think i will wait for "tellme" in wm6.5
THX guys
Click to expand...
Click to collapse
Hi,
I've voice command 1.6 in french, and it works nearly amazing fine. I'm not using bluetooth with it, and the only problem is that, sometimes, when I ask 'CALL ... AT HOME', it asks for confirmation, and it does not understand the 'YES' answer. This problem did not happen with version 1.5.
I also disables incoming caller names, because it has a conflict with the ring, and both are not audible (ring distorded, and voice not understandable).
But it tells you the meetings, mails, battery status, next appointements, etc...
Really amazing on a small device. I don't use contacts mamangers anymore for calling : just using voice command. I even work in the car, with the ambiant sound engine, and radio on (not too loud!). Worth the price for 19.95$ (as far as I remember).
regards,
Olivier.
PS: it fails on install because it has not enough hardware button. After install, go in the settings -> buttons and assing it to the only button. Pressing Green key for two seconds, and wait the the beep and microphone icon on notify bar. If you press the button too long, it makes a loud beep to tell you it is cancelled. You can also magic button, or remap the soft keys.
I used to use Cyberon Voice Commander to make a call. I have no idea how come HTC took off this software on Diamond 2...
I have sent the email to Cyberon to ask if there is any possible way to get their Voice Commander. They responded that the software now has retail version for about 10 languages, and they offer the full function 30-day trial on their website. I am using it so far. It works well on my Diamond 2.
Vito
Vito technology has 2 voice command apps. VoiceDialer to simlpy call some1 and Voice2Go to launch apps and cpntacts and so on.
How come there is just one button to assign something to? I would like to use cyberon voice commander via the headphone mic-button.. is there a way to do this, or is it a limitation in td2?
broman.m said:
How come there is just one button to assign something to? I would like to use cyberon voice commander via the headphone mic-button.. is there a way to do this, or is it a limitation in td2?
Click to expand...
Click to collapse
Try the latest version of Cyberon Voice Commander v2.5.2r from Cyberon website http://www.cyberon.com.tw/order_Product_con.php?NO100=15 as Lacerta mentioned .
This version provides "hold Volume-up" or "hold Volume-down" to launch CVC in Setting, as well as you can start it by pressing the button on BT earset.
Per xhaavardx, I downloaded the app from Vito Technology. Works great in the office. Totally useless driving down the road. And I do mean totally. Will not successfully dial a single voice tag I recorded in the parking lot unless I pull off the road and turn off all accessories, even the heater fan.
There was a post on this site somewhere recently stating that someone had converted the app from the old HTC Wizard into a .cab that could be installed on the diamond 2. I can't seem to search that thread out, though. Can any of you guys find it? That thing worked absolutely great!
mboessen said:
Per xhaavardx, I downloaded the app from Vito Technology. Works great in the office. Totally useless driving down the road. And I do mean totally. Will not successfully dial a single voice tag I recorded in the parking lot unless I pull off the road and turn off all accessories, even the heater fan.
There was a post on this site somewhere recently stating that someone had converted the app from the old HTC Wizard into a .cab that could be installed on the diamond 2. I can't seem to search that thread out, though. Can any of you guys find it? That thing worked absolutely great!
Click to expand...
Click to collapse
This one was ripped from Samsung but haven't tested it.
Tried a text but no luck so far. Will keep trying.
Also, MSVC is working great.
Bruce Inman said:
This one was ripped from Samsung but haven't tested it.
Tried a text but no luck so far. Will keep trying.
Also, MSVC is working great.
Click to expand...
Click to collapse
Tried the Tellme file on my Pure. It works decently while I'm on my wireless network but continually tells me it can't find the network even when it's at full strength on the 3G network. Maybe it's because it was configured to search for Sprint's network, I don't know. I've seen other say they got it to work for them.
Voice Dial for Touch Diamond 2
Hello, All:
Concerning voice dial for the Touch Diamond 2, I found Cyberon Voice Dial on this bulletin board in a thread somewhere, but, regretfully, I can't find it back. IF you can find it, it is DA BOMB!! Yeah, you have to record the voice tags, but it works great in noisy environments and almost never makes a mistake. I don't use BT with the new phone, but Cyberon worked great with the BT on my old Wizard. Whatever you do, don't pay for Vito Voice Dial. It is truly unserviceable in any situation with even moderate noise.
Good Luck! Hope this helps.
GrandAdmiral said:
Tried the Tellme file on my Pure. It works decently while I'm on my wireless network but continually tells me it can't find the network even when it's at full strength on the 3G network. Maybe it's because it was configured to search for Sprint's network, I don't know. I've seen other say they got it to work for them.
Click to expand...
Click to collapse
The program won't even start for me on WiFi.
I believe the network issue is specific to AT&T from what I have read. No fix for this yet.
Pity....
Hello!
I've been trying to use wm6 Voip software, and everything works ok until the person I¨m calling answers the phone. Then the call ends/drops.
I'm guessing its something to need to be configured in the ipdialplan.xml file, but I just can't figure out what
If i use fring everything works ok, but because fring doesn't work with my bluetooth headset, I'd need to make wm voip client work.
Any help will be appreciated.
testing a little more I found out that the problem is somehow in the incoming call settings.
I am trying with 2 HTC tytns. If I call from wm voip client to the other wm voip client the call ends as soon as the other end press accept, but if I call from the same wm client to fring then the call comes in with no problem, and it's like this both ways, meaning in both tytns.
Could somebody point me in the right direction to get calls from wm voip to wm voip client working please.