Phone: Eten X500 / WM6
Headset: Jabra 250v
Program: Cyberon Voice dialer 1.2
How do i make this to work? I whant the bluetooth button to activate Cyberon but now when i press the button the dialer opens and not cyberon...
Is there any fix for this like a regedit?
And No i dont whant to use MS Voice Command becuse it don't understand swedish.
I have same problem with my Trinity, MARY 3.4SL ROM and Plantronics headset. Search forum doesn't found anything. Can't believe that only two people have this problem.
I fixed this problem. This is cab file:
Cyberon Voice Dialer and Speed Dialer PTT button reassign for AT&T Tilt
Guys, would this "fixed" Cyberon Voice Dialer cab solve my following problem?
I have the AT&T Tilt and of course want to reassign the PTT button for my voice tags speed dialer, but when I installed the following my Motorola H700 Bluetooth headset no longer worked with my Tilt speed dialer. (The reassigned PTT button worked for speed dialing, but the Motorola H700 no longer worked). Here is what I first installed:
1) Cyberon Voice Dialer cab(Cyberon VD for WM6_v1.2build_61226_1.cab)
2) PTT_Fix_4Tilt
3) OEM_Assign_PTT_Button cab
So, to summarize, would this new fixed Cyberon Voice Dialer cab solve my problem with the Motorola bluetooth connecting to my Tilt speed dialer? And, I also want my PTT button to be reassigned for my Tilt voice speed dialer also. (PS. I don't want to use MS Voice Command, but rather I want to keep using my Tilt voice speed dialer.)
Additional Note: When I tried the above three installs the first time, and found my Motorola H700 no longer worked with my Tilt's voice speed dialer, I had to do a hard reset (factory reset) to get my voice speed dialing working again with the Motorola H700, and therefore had to re-install all my programs again! So, I want to really make sure this fixed Cyberon cab will work before I attempt this sort of thing again.
(I apologize, but I'm a newbie at this.)
Thanks so much in advance!
I trying to do things the other way around on my AT&T Tilt (TyTN II).
I am using a ROM which has Voice Command built into it, and MVC works well for voice dialing if your contacts have English names, which I don't have. So, i went ahead and disabled MVC (can't uninstall as it is built into the ROM) and installed Cyberon Speed Dial which allows me to use my own voice tags to do the calling.
everything is ok, but the only problem is that i can't find away to start cyberon by pressing the BT headset button. all solutions i found on this and other forums were for the other way around (using MVC instead of cyberon)
Any ideas?
Related
Hi!
I upgraded my HTC Wizard to WM6 using "S.N.E 3 Codename: Touch No Evil". ROM is great but I have one single problem. I cannot make my bluetooth hands free to activate voice dialing. This feature worked fine with WM5. I tried many things, including playing with the registry.
Do you have anything to recommend?
I guess I'm the only one with this problem!
What program are you using for voice dialing?
I am using Cyberon Voice Dialer.
Actually I discovered that I also have a problem receiving incoming calls by pressing the button of my hands free. The call is accepted but disconnected after a few milliseconds. The only way to make a call with my hands free is to start the call using the phone. For incoming calls my hands free does not work.
All these things was working with WM5 though.
I hope I won't have to get back to WM5!
Im sure is the OEM build of the cook. Why dont you install the cyberon voice dialer over. You can find this cab in the latest TNT thread.
Best regards.
Solved! Thanks, searching that ROM's threads.
Actually I'm using the latest release published by Cyberson. I was just missing the second of the following registry settings:
HKLM\SOFTWARE\OEM\VoiceCommand\Path = "\Windows\SDDialer.exe"
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule = "OEMAGW.dll"
I have my AT&T Tilt working just great, thanks to Mike Breauer and additional thanks to all of you here, but once I got my PTT button reassigned for Voice Speed Dialing my Motorola H700 bluetooth would no longer work for my voice tags/voice speed dialing.
Would the new "fixed" Cyberon VD cab (found in general forum under Cyberon Voice Dialer and Jabra 250v - bluetooth button) for WM6_v1.2_build_61226_1_fixed.cab, along with the PTT Fix 4Tilt and the OEM Assign PTT Button cabs solve my problem, OR should I use the 2 cabs for The Simple Step-by-Step PTT Re-Assignment, by asfoor, as appears in thread: "is there a way to remap the PTT button" Post #127, pg 13? (note I sent this same reply to the general forum, but also wanted to include it here.)
Here is what I first installed, that did remap my PTT button for Voice Speed Dialing, but prevented my Motorola H700 bluetooth from working with my voice tags:
1) Cyberon Voice Dialer cab(Cyberon VD for WM6_v1.2build_61226_1.cab)
2) PTT_Fix_4Tilt
3) OEM_Assign_PTT_Button cab
(PS. I don't want to use MS Voice Command, but rather I want to keep using my Tilt voice speed dialer.)
Additional Note: When I tried the above three cab installs the first time, and found my Motorola H700 no longer worked with my Tilt's voice speed dialer, I had to do a hard reset (factory reset) to get my voice speed dialing working again with the Motorola H700, and therefore had to re-install all my programs again! So, I want to really make sure: should I use the new "fixed" Cyberon cab along with the PTT Fix 4 Tilt and OEM Assign PTT Button cab, or should I use the method of the 2 cabs mentioned by asfoor in the Simple Step-by-Step PTT Re-Assignment before I attempt this sort of thing again? (The two cabs used by asfoor in the Simple Step-by-Step Re-Assignment are: OEM_Assign_PTT_Button.CAB and Task Manager.zip).
(I apologize, but I'm a newbie at this.)
Thanks so much in advance!
Hi! I'm new here and I got that lucky to change my WM5 on my Qtek9100 with TNT latest WM6 ROM. I've experienced same little problems as everybody else, but I got stuck with important one: I’m connecting my BT headset, it installs as HANDS FREE and works ok while speaking on the phone, but when i press button on it when phone is idle - it does nothing while I expect voice dialing. I've installed SDDIALER and it works, but still no reaction to BT button I've looked through different posts here and found how to change registry to work with sddialer - but I’ve found out that my registry already had right values. So what I’m asking - how to set BT headset to work with VOICE DIALING? Thanx!
Same problem
HI!
I Got the same prob, registry IS correct but bt button activates the normal wm dialer (cprog.exe) instead of the voice dialer. Did you resolve your isssue? I would like to hear sme hints on it.
Cheers!
Christos.
Following change in the registry:
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule = "\Windows\OEMAGW.dll" (string)
Hey fellow Raphael users
I have always been using original rom with Cyberion Voice Speed Dial with my Blutooth car stereo.
I could hit the voice dial button on the stereo, Cyberion voice speed dial popped up and I could say a name etc etc....
I then decided to flash a custom ROM, I tried EnergyROM 3 (WM 6.5) with MS Voice command. Even then, I could hit the voice dial button and MS Voice Command launched.
But I didn't like MS VC, so I reflashed again with EnergyROM 3 without MSVC and installed the Cyberion VC from here:
http://forum.xda-developers.com/showthread.php?t=296337
Cyberion Voice speed dial works fine, but I can't use the voice dial button, the app just doesn't launch. I checked the registry setting in above thread, they seem all fine.
Is this an issue with 6.5? Did anybody successfully installed CVSD with BT button working?
Help please
storm
OK, I solved this:
This is what I tried without success:
-Changing registry values to call SDDialer.exe / OEMAGW.DLL instead of Voicecmd.exe / btagext.dll
-Overwrite OEMAGW.DLL / SDDialer.exe with versions from original ROM
-Installed update from Cyberion which should fix BT Button
-Installed EnergyROM 3.0 with MSVC and installed CVSD and tried all of the above again
-Searched the registry for other keys containing Voicecmd.exe
Nothing of this helped. What I did to solve it:
Use Resco Explorer to copy SDDialer.exe to Voicecmd.exe (accept warning about ROM file) and it works....
I really don't see why the registry changes didn't help, it looks like Voicecmd.exe is hard coded somewhere (registry settings have no effect)
I hope this helps somebody else who wants CVSD instead of MSVC
storm
Hello,
i ve ICS on my device but this issue was allways in 2.3.X
if i press the mic button on the bluetooth headset the application
voice dial (sprachwahl) opens, but this application doesnt understand me
(in german). The Voice Action (sprachsuche) works without any problems.
1) can i change the voice dial (sprachwahl) against the voice action (sprachsuche)
2) how can i get the voice dialer (sprachwahl) in german?
anybody else with this issue?
thx a lot