hello people...
i don´t know what to do, i was trying to upgrade my prophet...
when i restarted after the rom upgrade..it just stays in the splash screen and do nothing...
active sync don´t work...
someone can give me any advice?
some steps to bring my pda back??
please!!
thank you !!
When using the search you'll find about a thousand similar posts with explanation how to recover.
ringuete said:
hello people...
i don´t know what to do, i was trying to upgrade my prophet...
when i restarted after the rom upgrade..it just stays in the splash screen and do nothing...
active sync don´t work...
someone can give me any advice?
some steps to bring my pda back??
please!!
thank you !!
Click to expand...
Click to collapse
It's a simple procedure of connecting your device to you computer, entering the bootloader and flashing the carrier ROM.
To get into the bootloader, hold the camera button down and push in the reset button for a second or two. Now, release the reset button while still holding down the camera button.
Hello bootloader.
Now, while in this screen, flash your original carrier ROM. That's it.
Good luck!
yeah...
on my prophet i had to push the camera button and the power button together to get into the bootloader mode..
and, it didn´t matter if activesync detected my device...just put wm5 again...and then an upgrade to wm6...
and surfing again....
thank you!!!!
sorry my english!!
I Have a Blackjack "i607" and My camera Button on the side seems to not be working, And i Cant get Into Boot Mode. To update my Rom's, For the new windows mobile 6.0 for the blackjack, Does anyone know how i can get into boot mode with out holding down the right soft key + camera Button thin hit power.
Thanks, I have searched the web for this problem and have found know luck.
Here is what you have to do .
If there is way to backup your stuff from the phone DO IT !
Now you have to HARD reset your phone .
Turn it off , when it's off you have to hold UP button and push Power button
. follow the instructions .
If that does not work then there is another way of doing it. On your phone, under Settings, Security, More..., there is the option "Reset". This will wipe out everything on your phone and put the phone back into the state it was when you bought it ( or stole it ) just kidding . Now go to SAMSUNG website and update it with OFFICIAL update and DO follow ALL instructions
Good Day!
i made a very stupid mistake. i tried to update my Magician with Wizzard ROM.
The process went good, all the steps had been done perfectly, but my MDA crashed totally. The only think, that's happening when i'm pressing on/off button is a once instant flash of display.
I know, that's is too naive from my side to think that there is any hope, but anyway: is there any way how to solve this problem?
pls help me
i was trying to upgrade my magician rom but it stopped in midway. it is showing a dark display and mention Serial on to and v1.00 at bottom.
pls help me how to give life to my pda. have tried to soft and hard reset but didnt work. thanks
do u able to start bootloader (POWER +CAMERA hold and press reset)
Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
I am having the same problems as bplb71....
No way to do a HardReset or Leave bootloader.... It got stuck
Now what??
Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
found a mgician and it starts but hangs o the align screen
the thing you need to press keeps moving arround the screen for 20 min and then i stopped
i am also having the same problem.,, cant enter the bootloader or hard reset ,,,,,magician is stuck now,,, what should i do now???? i am worried.
happend to me to
i have same problem but when i let battery run out and then plug into wall it boots normally but then it asks to restarts after setup and back to square one help plz
Hi all,
after installing volDeus BG tweakv 0.5 my phone died. i can't restart it and i can't perform a hard reset. i also tried the red reset button from the back - nothing. it's not even charging. i tried a different battery but didn't solve the problem. any help would be appreciated. i don't want to send it back for repair.
It happened to me after manilla, i made this factory reset and after that the phone worked fine.
Performing a factory reset using phone buttons
If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using buttons on the phone.
With your phone powered off, press and hold the VOLUME UP and VOLUME DOWN buttons.
While holding the volume buttons, press the END/POWER button briefly and then release it.
When you see a warning message on screen, release the VOLUME UP and VOLUME DOWN buttons.
Press the VOLUME UP button to perform the reset, or press any other button to cancel the reset.
thanks for reply. like i said, i can't perform a hard reset because the phone is not responding. when i press the volume up, down and power button nothing happens. i don't know what to do.
Ahhhhhh.. me 2
My hd was dead during flashing and still not working but a good thing......
I bought a new HD2.
But if some one have an idea plz let me know.
Thanks in advance
l3onard said:
thanks for reply. like i said, i can't perform a hard reset because the phone is not responding. when i press the volume up, down and power button nothing happens. i don't know what to do.
Click to expand...
Click to collapse
If you're unable to perform a hard reset with the hard keys as explained above, you don't have any other choice but to send it in for repair as far as I know...sorry.
I'd suggest first taking out the battery for a couple of hours and then try again.
de Wolfe said:
I'd suggest first taking out the battery for a couple of hours and then try again.
Click to expand...
Click to collapse
i'll try this. thanks.
de Wolfe said:
I'd suggest first taking out the battery for a couple of hours and then try again.
Click to expand...
Click to collapse
l3onard said:
i'll try this. thanks.
Click to expand...
Click to collapse
Also try this;
1. Remove the battery
2. Plug the USB cable to your computer and to your HD2
3. Push and hold volume down/up
4. Insert the battery
Normally the HD2 would start when doing this.
wardh said:
Also try this;
1. Remove the battery
2. Plug the USB cable to your computer and to your HD2
3. Push and hold volume down/up
4. Insert the battery
Normally the HD2 would start when doing this.
Click to expand...
Click to collapse
thanks but it's not working. maybe because i deactivated charging when connected to PC.
with the combination volume -, reset and power i managed to enter the bootloader. anybody help me to go on pls?
l3onard said:
with the combination volume -, reset and power i managed to enter the bootloader. anybody help me to go on pls?
Click to expand...
Click to collapse
1. L3nny, for future reference, Co0kie's Home Tab v1.8.5 already has the voldeus skinning function built-in, so there's no more need for it in the future... but since you've got it now... calm down and bear with me here...
2. Voldeus' skinning does not mess with your rom image at all, and any changes can be reversed with a HardReset (i've been there and done that). A HardReset does take 3 hands and a few tries to get it for the first time. The red button on the back is only a SoftReset, same as taking the battery out, so that's not gonna work. And since you've just seen the bootloader now, your previous HardReset attempt probably didn't have the correct buttons combination, so it never worked. Try again using this combo from TBoy2000's HowTo thread: remember it's pressing volumeUP AND Down together AND Power button. you need three thumbs
tboy2000 said:
1. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
2. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
"This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press VolUp to restore manufacturer defaults, or press other keys to cancel."
3. Release the VOLUME UP and VOLUME DOWN buttons.
4. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
Click to expand...
Click to collapse
good luck
atlaswing said:
1. L3nny, for future reference, Co0kie's Home Tab v1.8.5 already has the voldeus skinning function built-in, so there's no more need for it in the future... but since you've got it now... calm down and bear with me here...
2. Voldeus' skinning does not mess with your rom image at all, and any changes can be reversed with a HardReset (i've been there and done that). A HardReset does take 3 hands and a few tries to get it for the first time. The red button on the back is only a SoftReset, same as taking the battery out, so that's not gonna work. And since you've just seen the bootloader now, your previous HardReset attempt probably didn't have the correct buttons combination, so it never worked. Try again using this combo from TBoy2000's HowTo thread: remember it's pressing volumeUP AND Down together AND Power button. you need three thumbs
good luck
Click to expand...
Click to collapse
hard reset is not working. i don't think i do it wrong, because it's not the first time i try this.
i copied shell32.exe and aygshell.dll from voldeus' post an dput it on my sd card. i chose some settings, chose the wallpaper and soft reset. but the phone froze at start-up. i put out the battery and from that moment, i couldn't do anything.
if i can enter the bootloader does it mean i can install HSPL and maybe a stock or custom ROM? but if something goes wrong i loose my warranty!
please help me guys, i'm lost.
1) Maby your battery charge is too low ( maby, your usb port is broken and charging is not ON)
Try to connect your HD2 to charge
Its will be better if you will go to service centre.
sorry for my bad English
l3onard said:
hard reset is not working. i don't think i do it wrong, because it's not the first time i try this.
i copied shell32.exe and aygshell.dll from voldeus' post an dput it on my sd card. i chose some settings, chose the wallpaper and soft reset. but the phone froze at start-up. i put out the battery and from that moment, i couldn't do anything.
if i can enter the bootloader does it mean i can install HSPL and maybe a stock or custom ROM? but if something goes wrong i loose my warranty!
please help me guys, i'm lost.
Click to expand...
Click to collapse
Is your machine tied to a certain provider? If it is send it back and get a new one.You obviously have a faulty machine.Easy way to bootloader,
Hold volume down.
Take off back.
Press red button.
Bootloader appears flash radio or ROM
i tried with another battery and nothing changed. so i solved this problem already.
yes, it's an orange phone. what would be better: trying to flash a new ROM (if something go wrong i loose the warranty) or send it back for repair?
l3onard said:
i tried with another battery and nothing changed. so i solved this problem already.
yes, it's an orange phone. what would be better: trying to flash a new ROM (if something go wrong i loose the warranty) or send it back for repair?
Click to expand...
Click to collapse
New phone definitely.
l3onard said:
i tried with another battery and nothing changed. so i solved this problem already.
yes, it's an orange phone. what would be better: trying to flash a new ROM (if something go wrong i loose the warranty) or send it back for repair?
Click to expand...
Click to collapse
I dont know but i think that: to flash a new ROM you must enter in bootloader.
It is better to change a device for the new
Its a critical problem. This problem can appear again even if you repair your phone.
If you have official guarantee - you must change your device ( go to your service centre )
DUDE!~!!!!~! You're already in bootloader, just flash your original orange STOCK ROM already and be done with this!!! ALSO, you MUST take out your SD card, since that maybe the problem to begin with (having your core system files at the root of your SD is not a smart idea). If that DOESN'T work, then send the damn thing back to Orange for an exchange! Your choices are really simple, why are you wasting everone's time with this!
Good luck
i just wanted your opinion about my problem beeing a beginner in WM phones. i think always is better to ask a second opinion, especially when you are a newbie. if i wasted someones time i'm sorry.
anyway, thanks for the answers. i'll send it back to orange.
I wouldn't send the phone to repair.
1. enter bootloader-mode
2. mtty task29 search forum
3. enter bootloader again
4. flash orange original rom
5. after flashing perform a hard reset
Hi all, I have got to send my tablet in for repair after smashing the screen. Is there a way I can clear the memory of all data etc without being able to use the screen?.
Thanks Scotty.
By using ADB .
Or if you can remember the button sequence for a factory reset .
jje
JJEgan said:
By using ADB .
Or if you can remember the button sequence for a factory reset .
jje
Click to expand...
Click to collapse
I Do not know how to use adb and cannot use the screen to be able to factory reset.
Thanks Scotty
Managed to do it using the volume up and power key. Hope this had removed the alarm that has been going off every morning that I'm unable to turn off lol.
Thanks Scotty.