hello people...
i don´t know what to do, i was trying to upgrade my prophet...
when i restarted after the rom upgrade..it just stays in the splash screen and do nothing...
active sync don´t work...
someone can give me any advice?
some steps to bring my pda back??
please!!
thank you !!
When using the search you'll find about a thousand similar posts with explanation how to recover.
ringuete said:
hello people...
i don´t know what to do, i was trying to upgrade my prophet...
when i restarted after the rom upgrade..it just stays in the splash screen and do nothing...
active sync don´t work...
someone can give me any advice?
some steps to bring my pda back??
please!!
thank you !!
Click to expand...
Click to collapse
It's a simple procedure of connecting your device to you computer, entering the bootloader and flashing the carrier ROM.
To get into the bootloader, hold the camera button down and push in the reset button for a second or two. Now, release the reset button while still holding down the camera button.
Hello bootloader.
Now, while in this screen, flash your original carrier ROM. That's it.
Good luck!
yeah...
on my prophet i had to push the camera button and the power button together to get into the bootloader mode..
and, it didn´t matter if activesync detected my device...just put wm5 again...and then an upgrade to wm6...
and surfing again....
thank you!!!!
sorry my english!!
Related
Hy!
My Kaiser reboot at 10 sec continuous, at black windows with "smart mobility".
I try to hard reset but not work.
My PC doesn't recognize it with or without Active Sync or MTTY or RUU.
This problem apear after i got the battery from kaiser without turn it off.
Can somebody help me with advice?
Thanks
noor_ltd said:
Hy!
My Kaiser reboot at 10 sec continuous, at black windows with "smart mobility".
I try to hard reset but not work.
My PC doesn't recognize it with or without Active Sync or MTTY or RUU.
This problem apear after i got the battery from kaiser without turn it off.
Can somebody help me with advice?
Thanks
Click to expand...
Click to collapse
Did you already have HardSPLv1 loaded? If so, enter the bootloader (hold power and camera buttons and press reset and you should get a tri-color screen). From there flash whatever ROM you were using again and see if that fixes it.
Quentin- said:
Did you already have HardSPLv1 loaded? If so, enter the bootloader (hold power and camera buttons and press reset and you should get a tri-color screen). From there flash whatever ROM you were using again and see if that fixes it.
Click to expand...
Click to collapse
Thank you Quentin for answer.
I don't have load HardSPLv1.
If I press power+camera, not appear tri-color screen.
Any idea?
noor_ltd said:
Thank you Quentin for answer.
I don't have load HardSPLv1.
If I press power+camera, not appear tri-color screen.
Any idea?
Click to expand...
Click to collapse
Please give more information: What did you do just before this happened? Did you flash a ROM? If this is happening for no reason, take it back to your vendor and have them fix it. If you flashed a ROM, did you follow the right steps?
noor_ltd said:
Thank you Quentin for answer.
I don't have load HardSPLv1.
If I press power+camera, not appear tri-color screen.
Any idea?
Click to expand...
Click to collapse
power+camera+reset...and its really tricky. Keep holding camera+power after you have pushed reset till it comes up. It even takes me a number of tries before I get the tri-color screen.
I never tried loading HardSPLv1 from the boot screen but it should work. I highly suggest doing that *before* you try to re-flash a ROM. Link here: http://forum.xda-developers.com/showthread.php?t=334679
Then after loading HardSPLv1 go back to the tri-color screen and load the HTC or ATT default ROM and see if that fixes your problem.
EDIT: I agree with TheOccult FYI, I assume you have a reason to not have simply swapped the device at your retailer hence my advice. If you can easily swap the device just do that instead and it'll save you a lot of grief.
TheOccult said:
Please give more information: What did you do just before this happened? Did you flash a ROM? If this is happening for no reason, take it back to your vendor and have them fix it. If you flashed a ROM, did you follow the right steps?
Click to expand...
Click to collapse
NO. I don't flash any ROM.
I forgot that the SIM card in not under battery, so I remove the battery when windows is working.....without power off.
If I press left+soft keys+soft reset I got white screen.
I press call/send, apear "restore...completed".
After I press call/send again, apear again black screen with "smart mobility"
noor_ltd said:
so I remove the battery when windows is working.....without power off.
Click to expand...
Click to collapse
I'm just curious but why would you remove the battery when the device is powered on?
Your best bet is to take it back to the vendor as they may need to reload your device since you haven't flashed your rom you should be okay.
noor_ltd said:
NO. I don't flash any ROM.
I forgot that the SIM card in not under battery, so I remove the battery when windows is working.....without power off.
If I press left+soft keys+soft reset I got white screen.
I press call/send, apear "restore...completed".
After I press call/send again, apear again black screen with "smart mobility"
Click to expand...
Click to collapse
You broke it. Take it back where you bought it.
Also, this is not the appropriate forum for your problem.
I have a S200 and i was upgrade my ROM but he reboot in progress bar, and i can´t upgrade the ROM, he still reboot in progress bar.
It apears error 302, comunnication!(the qtek is in usb, but he reboot automatic and PC show this error).
Can anyone Help Me..
Can you enter bootloader? Hold the comm manager button, and soft reset.
Dependant on phone sometimes you have to hold just the camera button to get to the triband screen to re-flash
As far as I know, you can only enter the bootloader on a prophet the way I described, but I shall try what you have said next time I need it.
try to change your usb cable.
It was a solution for me , not the same problem but we never know. Give it a try .
Hope that helps.
BR
Pedro
thank you
its ok ....
I downloaded the TNT V5 rom and I try to upgrade my fone! at the ends it says to press camera but and command button and soft reset! but the fone didnt want to shut off.. i removed the battery and when i turn it off the screen stay only where it says IPl radio and so on... and cannot do anything else!
what can i do!
Why did you....
diddyp20 said:
I downloaded the TNT V5 rom and I try to upgrade my fone! at the ends it says to press camera but and command button and soft reset! but the fone didnt want to shut off.. i removed the battery and when i turn it off the screen stay only where it says IPl radio and so on... and cannot do anything else!
what can i do!
Click to expand...
Click to collapse
Men! jajajaja ok lets see
when an upgrade finish it restart by itself you dont need to do nothing... when the phone begins and configures by itself if you want it... its recomemded... to hard reset i mean hold the record... hold the comm buttons and then push the rest hole still holdin the two buttons... a black screen appears telling you to press the send button unhold the butons so then pres the send button...
but for now try to put your phone in bootloaders i dont remember how but read the wikiwizard page it say how to enter in bootloaders forcing... then reflas with RUU make sure that your device is unlocked CID SIM etc etc etc.
tell me how is it going, maybe you will ned more steps.
Is not destroy cause it turns on dont be afraid it works but stucks on splash screen...
diddyp20 said:
I downloaded the TNT V5 rom and I try to upgrade my fone! at the ends it says to press camera but and command button and soft reset! but the fone didnt want to shut off.. i removed the battery and when i turn it off the screen stay only where it says IPl radio and so on... and cannot do anything else!
what can i do!
Click to expand...
Click to collapse
You said in your very first post that you had a "HTC Mogul", if so, you have a Titan? "Sprint Mogul" go here and see for sure what phone you have.
http://forum.xda-developers.com/forumdisplay.php?f=381
You better make sure before you try and do anything.
i had a mogul first, i sold it and took a wizard
That is good news... Did you fix your Wizard?
When I had mine and I flashed one of TNT's ROMs, it error ed and gave me introductions to follow but I just put it into boot loader mode and re flashed to a different ROM
Good Day!
i made a very stupid mistake. i tried to update my Magician with Wizzard ROM.
The process went good, all the steps had been done perfectly, but my MDA crashed totally. The only think, that's happening when i'm pressing on/off button is a once instant flash of display.
I know, that's is too naive from my side to think that there is any hope, but anyway: is there any way how to solve this problem?
pls help me
i was trying to upgrade my magician rom but it stopped in midway. it is showing a dark display and mention Serial on to and v1.00 at bottom.
pls help me how to give life to my pda. have tried to soft and hard reset but didnt work. thanks
do u able to start bootloader (POWER +CAMERA hold and press reset)
Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
I am having the same problems as bplb71....
No way to do a HardReset or Leave bootloader.... It got stuck
Now what??
Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
found a mgician and it starts but hangs o the align screen
the thing you need to press keeps moving arround the screen for 20 min and then i stopped
i am also having the same problem.,, cant enter the bootloader or hard reset ,,,,,magician is stuck now,,, what should i do now???? i am worried.
happend to me to
i have same problem but when i let battery run out and then plug into wall it boots normally but then it asks to restarts after setup and back to square one help plz
The problem was solved by replacing the camera button See last post
Hi,
I've a big problem : I get stuck on the first bootscreen "Smart mobility"
Impossible to enter in bootloader by press and hold the camera button end reset...
Now it's impossible to use the phone. The last thing what I do is to flash with the Pcarvalho last build but the system became very very slow
Is anybody can help me because I searched many forums but I found nothing...
Thanks in advance.
Cheers.
manu33xtro said:
Hi,
I've a big problem : I get stuck on the first bootscreen "Smart mobility"
Impossible to enter in bootloader by press and hold the camera button end reset...
Now it's impossible to use the phone. The last thing what I do is to flash with the Pcarvalho last build but the system became very very slow
Is anybody can help me because I searched many forums but I found nothing...
Thanks in advance.
Cheers.
Click to expand...
Click to collapse
have you flashed via Memory Card? if not, try it...
pcarvalho said:
have you flashed via Memory Card? if not, try it...
Click to expand...
Click to collapse
No, I try directly by USB and it works.... But the system was very slow and I decided to flash again. But no way by USB because the loading process has not been through (is stuck well before setting screen)...
So I tried by the bootloader mode : not be accessed
And for flash with SdCard you need to enter in this mode ...
Thanks for your help if you can.
For your information, I flashed a lot between your version and android, this is the first time in several years that I have this problem.
Cheers.
manu33xtro said:
No, I try directly by USB and it works.... But the system was very slow and I decided to flash again. But no way by USB because the loading process has not been through (is stuck well before setting screen)...
So I tried by the bootloader mode : not be accessed
And for flash with SdCard you need to enter in this mode ...
Thanks for your help if you can.
For your information, I flashed a lot between your version and android, this is the first time in several years that I have this problem.
Cheers.
Click to expand...
Click to collapse
Check this...
http://forum.xda-developers.com/showthread.php?t=425922
[email protected] said:
Check this...
http://forum.xda-developers.com/showthread.php?t=425922
Click to expand...
Click to collapse
Hi,
Thanks for the link. I looked for and try but no effect... In fact my phone is blocked in the first bootscreen and can't mount usb drive I think...
The big problem is I can't access to boot mode by press and hold camera button and I don't know why
Thanks again.
Cheers
Hello, I had the same problem and I solved re-flashed the hard-spl.
adrenalynik said:
Hello, I had the same problem and I solved re-flashed the hard-spl.
Click to expand...
Click to collapse
Yeah... But how ? I can't see the phone in my PC and I can't enter in boot mode... Impossible to get WM6.5 because the boot sequence is stopped a few secondes after reset
Anyway thank you
Cheers.
manu33xtro said:
Yeah... But how ? I can't see the phone in my PC and I can't enter in boot mode... Impossible to get WM6.5 because the boot sequence is stopped a few secondes after reset
Anyway thank you
Cheers.
Click to expand...
Click to collapse
have you Hard Reseted the device?
pcarvalho said:
have you Hard Reseted the device?
Click to expand...
Click to collapse
Hi pcarvalho,
Oh yes, many times... I press and hold the camera button and reset but no effect... Impossible to see the color screen And the phone is blocked in the "smart mobility" view.
Maybe another configuration of button ??
manu33xtro said:
Hi pcarvalho,
Oh yes, many times... I press and hold the camera button and reset but no effect... Impossible to see the color screen And the phone is blocked in the "smart mobility" view.
Maybe another configuration of button ??
Click to expand...
Click to collapse
Remove the battery for 10 seconds than insert it and press camera botton and power botton.
manu33xtro said:
Hi pcarvalho,
Oh yes, many times... I press and hold the camera button and reset but no effect... Impossible to see the color screen And the phone is blocked in the "smart mobility" view.
Maybe another configuration of button ??
Click to expand...
Click to collapse
I had the same problem with my first device.....unfortunately no solution....
adrenalynik said:
Remove the battery for 10 seconds than insert it and press camera botton and power botton.
Click to expand...
Click to collapse
Alas, no effect...
kostas244 said:
I had the same problem with my first device.....unfortunately no solution....
Click to expand...
Click to collapse
****... Sorry but if it is really broken...
Are you sure ? Hope is vital
Thanks.
manu33xtro said:
****... Sorry but if it is really broken...
Are you sure ? Hope is vital
Thanks.
Click to expand...
Click to collapse
I tried almost everything....still now i can't pass the first boot screen...so...i can't go into bootloader mode or make a hard reset....too bad..
kostas244 said:
I tried almost everything....still now i can't pass the first boot screen...so...i can't go into bootloader mode or make a hard reset....too bad..
Click to expand...
Click to collapse
OK. maybe I'll find a way to fix it I hope
Thanks again for your help.
Cheers
manu33xtro said:
OK. maybe I'll find a way to fix it I hope
Thanks again for your help.
Cheers
Click to expand...
Click to collapse
If you find something usefull , pm me please.....thanks and good luck
kostas244 said:
If you find something usefull , pm me please.....thanks and good luck
Click to expand...
Click to collapse
Of course
A glimmer of hope, sometimes, when I boot my phone and press and hold camera button, and connect with USB : my PC detect it but just one time and can't mount really
And I will also inquire if there is not a solution for the dismantling and see...
Is your phone security unlocked ? If so press the power button and the green (send) button to put your phone into diag mode.You will need the motoQ drivers "just search for motoQ or diag drivers".Your screen will be black but you will be able to use mtty commands ie info 8 (check for bad blocks) cego (boot windows).
You will have to connect mtty via com port.
Be careful with mtty it can kill your device.
meknb said:
Is your phone security unlocked ? If so press the power button and the green (send) button to put your phone into diag mode.You will need the motoQ drivers "just search for motoQ or diag drivers".Your screen will be black but you will be able to use mtty commands ie info 8 (check for bad blocks) cego (boot windows).
You will have to connect mtty via com port.
Be careful with mtty it can kill your device.
Click to expand...
Click to collapse
I tested your solution but ... no way ...
I find the plan to remove and also the procedure for entering diagnostic mode but without result so (capture button plus power button : no effect).
It's incredible
This solution will only work if you have hard spl mfg installed,It could be a faulty camera button.