Hy!
My Kaiser reboot at 10 sec continuous, at black windows with "smart mobility".
I try to hard reset but not work.
My PC doesn't recognize it with or without Active Sync or MTTY or RUU.
This problem apear after i got the battery from kaiser without turn it off.
Can somebody help me with advice?
Thanks
noor_ltd said:
Hy!
My Kaiser reboot at 10 sec continuous, at black windows with "smart mobility".
I try to hard reset but not work.
My PC doesn't recognize it with or without Active Sync or MTTY or RUU.
This problem apear after i got the battery from kaiser without turn it off.
Can somebody help me with advice?
Thanks
Click to expand...
Click to collapse
Did you already have HardSPLv1 loaded? If so, enter the bootloader (hold power and camera buttons and press reset and you should get a tri-color screen). From there flash whatever ROM you were using again and see if that fixes it.
Quentin- said:
Did you already have HardSPLv1 loaded? If so, enter the bootloader (hold power and camera buttons and press reset and you should get a tri-color screen). From there flash whatever ROM you were using again and see if that fixes it.
Click to expand...
Click to collapse
Thank you Quentin for answer.
I don't have load HardSPLv1.
If I press power+camera, not appear tri-color screen.
Any idea?
noor_ltd said:
Thank you Quentin for answer.
I don't have load HardSPLv1.
If I press power+camera, not appear tri-color screen.
Any idea?
Click to expand...
Click to collapse
Please give more information: What did you do just before this happened? Did you flash a ROM? If this is happening for no reason, take it back to your vendor and have them fix it. If you flashed a ROM, did you follow the right steps?
noor_ltd said:
Thank you Quentin for answer.
I don't have load HardSPLv1.
If I press power+camera, not appear tri-color screen.
Any idea?
Click to expand...
Click to collapse
power+camera+reset...and its really tricky. Keep holding camera+power after you have pushed reset till it comes up. It even takes me a number of tries before I get the tri-color screen.
I never tried loading HardSPLv1 from the boot screen but it should work. I highly suggest doing that *before* you try to re-flash a ROM. Link here: http://forum.xda-developers.com/showthread.php?t=334679
Then after loading HardSPLv1 go back to the tri-color screen and load the HTC or ATT default ROM and see if that fixes your problem.
EDIT: I agree with TheOccult FYI, I assume you have a reason to not have simply swapped the device at your retailer hence my advice. If you can easily swap the device just do that instead and it'll save you a lot of grief.
TheOccult said:
Please give more information: What did you do just before this happened? Did you flash a ROM? If this is happening for no reason, take it back to your vendor and have them fix it. If you flashed a ROM, did you follow the right steps?
Click to expand...
Click to collapse
NO. I don't flash any ROM.
I forgot that the SIM card in not under battery, so I remove the battery when windows is working.....without power off.
If I press left+soft keys+soft reset I got white screen.
I press call/send, apear "restore...completed".
After I press call/send again, apear again black screen with "smart mobility"
noor_ltd said:
so I remove the battery when windows is working.....without power off.
Click to expand...
Click to collapse
I'm just curious but why would you remove the battery when the device is powered on?
Your best bet is to take it back to the vendor as they may need to reload your device since you haven't flashed your rom you should be okay.
noor_ltd said:
NO. I don't flash any ROM.
I forgot that the SIM card in not under battery, so I remove the battery when windows is working.....without power off.
If I press left+soft keys+soft reset I got white screen.
I press call/send, apear "restore...completed".
After I press call/send again, apear again black screen with "smart mobility"
Click to expand...
Click to collapse
You broke it. Take it back where you bought it.
Also, this is not the appropriate forum for your problem.
Related
Hi guys. I have such a problem - when i press reset my S100 gos to bootloader mode. After I take the battery off and then put it in i see the windows setup screen, then when programs from the ExtROM are setup and the device reboots it go to Bootloader mode again. what i have to do?
just push soft reset without power button while before extended rom begin loading......... advice from Moscow
When pressing reset device goes to bootloader mode
It shouldn't go to bootloader. The documented procedure is that after aligning the screen etc, click ok, and then reset the PDA as normal before it finishes booting up, by poking your stick in it's hole. Don't press any of it's buttons. Just the hole.
V
Maybe you have a halfway finished ROM upload on your Magician? Try running a full ROM install, that should fix it.
vijay555 said:
It shouldn't go to bootloader. The documented procedure is that after aligning the screen etc, click ok, and then reset the PDA as normal before it finishes booting up, by poking your stick in it's hole. Don't press any of it's buttons. Just the hole.
Click to expand...
Click to collapse
But it does go to bootloader. In any way if i press reset button (that is in the hole) it goes to bootloader.
HBK said:
Try running a full ROM install, that should fix it.
Click to expand...
Click to collapse
What do you mean full ROM?
I tried to flash it just as usual, but when it goes to bootloader mode windows cant recognize the device so the flasher tells "connection error".
Good Day!
i made a very stupid mistake. i tried to update my Magician with Wizzard ROM.
The process went good, all the steps had been done perfectly, but my MDA crashed totally. The only think, that's happening when i'm pressing on/off button is a once instant flash of display.
I know, that's is too naive from my side to think that there is any hope, but anyway: is there any way how to solve this problem?
pls help me
i was trying to upgrade my magician rom but it stopped in midway. it is showing a dark display and mention Serial on to and v1.00 at bottom.
pls help me how to give life to my pda. have tried to soft and hard reset but didnt work. thanks
do u able to start bootloader (POWER +CAMERA hold and press reset)
Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
I am having the same problems as bplb71....
No way to do a HardReset or Leave bootloader.... It got stuck
Now what??
Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
found a mgician and it starts but hangs o the align screen
the thing you need to press keeps moving arround the screen for 20 min and then i stopped
i am also having the same problem.,, cant enter the bootloader or hard reset ,,,,,magician is stuck now,,, what should i do now???? i am worried.
happend to me to
i have same problem but when i let battery run out and then plug into wall it boots normally but then it asks to restarts after setup and back to square one help plz
Hello, well, after several searching ended up here... my first post (like all of us when in trouble)
When trying to enter the tri-color screen, we pressed several times power+volume down and reset button but the phone never gets there, no matter what you do and now it is stuck at the "boot" screen that says: "Touch pro" in white letters and in the right down corner, with red letters says:
R 1.02.25.19
G 52.33.25.17W
D 1.94.00.00
Now, what to do here? it doesn´t boot, no hard reset, no nothing, if i press the reset button re-powers and gets there again... help..!!!
Thanks.
Sergio.
squiros1976 said:
Hello, well, after several searching ended up here... my first post (like all of us when in trouble)
When trying to enter the tri-color screen, we pressed several times power+volume down and reset button but the phone never gets there, no matter what you do and now it is stuck at the "boot" screen that says: "Touch pro" in white letters and in the right down corner, with red letters says:
R 1.02.25.19
G 52.33.25.17W
D 1.94.00.00
Now, what to do here? it doesn´t boot, no hard reset, no nothing, if i press the reset button re-powers and gets there again... help..!!!
Thanks.
Sergio.
Click to expand...
Click to collapse
Do entering bootloader : http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners#bootloader (With the device turned off, press and hold the VOLUME DOWN and POWER buttons, then press the RESET button with the stylus)
Then flash new ROM, i hope it's helping
Already tried that...
erwinpiero said:
Do entering bootloader :
(With the device turned off, press and hold the VOLUME DOWN and POWER buttons, then press the RESET button with the stylus)
Then flash new ROM, i hope it's helping
Click to expand...
Click to collapse
That´s exactly why i ended with the phone stuck at the first time... i recently got this phone and i wanted to see the bootloader version and stuff to do a firmware update but now it´s just there all the time. Not even being recognized by the pc.
Thanks.
Had You try flash via SD Card?
erwinpiero said:
Had You try flash via SD Card?
Click to expand...
Click to collapse
Well, no, i don´t have an sd card available now... one thing i forgot to say is the phone, after it is on that screen, never turns off again unless you remove the battery... and yes, i have left it on for a day, same thing...
What is the procedure to do the sd card flash thing? it that needs to get to the tree-color screen forget it... that´s exactly what the phone doesn´t do...
Thanks.
Sergio.
Hello Sir, to flash using SD card, you can read it here http://forum.xda-developers.com/showthread.php?t=448008 see number 5.
HTC Fuze
I had the same problem. None of the hard resets worked on my phone. The screen would be stuck on my lock screen and unresponsive. It would not shut off unless the battery was taken out.
Now it's working fine, all I had to do was press the reset button and enter in the code a1b2c3.
Hope this helps.
nessab04 said:
I had the same problem. None of the hard resets worked on my phone. The screen would be stuck on my lock screen and unresponsive. It would not shut off unless the battery was taken out.
Now it's working fine, all I had to do was press the reset button and enter in the code a1b2c3.
Hope this helps.
Click to expand...
Click to collapse
Hi,
Interesting... i´m not the only one with that problem then.... code doesn´t do anything... still same screen....
...no bootloader...
erwinpiero said:
Hello Sir, to flash using SD card, you can read it here --- see number 5.
Click to expand...
Click to collapse
Hello,
Ok, well, the main problem here is that i can´t get into bootloader... the phone is stuck at the fist "Touch pro" screen and nothing else happens...
Anyone with a clue on this? is this phone bricked then...
you sure youre puttin it into bootloader correctly? these things are pretty hard to brick, and can be put through hell and back and still be able to put into bootloader. make sure the hold VOLUME DOWN + POWER, and at the same time RESET WITH THE STYLUS IN THE BOTTOM...youll want to HOLD ALL THREE untill you see the tri colour bootloader screen. keep trying mate, it should go
Finally got bootloader...
the-wrangler said:
you sure youre puttin it into bootloader correctly? these things are pretty hard to brick, and can be put through hell and back and still be able to put into bootloader. make sure the hold VOLUME DOWN + POWER, and at the same time RESET WITH THE STYLUS IN THE BOTTOM...youll want to HOLD ALL THREE untill you see the tri colour bootloader screen. keep trying mate, it should go
Click to expand...
Click to collapse
Finally, after several tries it got into bootloader... now the thing doesn't end here because for some reason when i try to upload the Raphael Hard_SPL the phone goes ok to 0% and in about a minute a communication error appears and that's it...
We are moving forward... at least.
Bootloader Info.
Tried to flash via microSD but the phone says not allow..i guess that's because the hard SPL is not installed and it has the stock... here's what the bootloader shows, i'm not being able to install olinex hardSPL...
RAPH100
SPL-1.94.0000
MicroP-Raph (LED) v13
MicroP-Raph (KEY) v5
PSOC-Raph STAGE_CVT v0x36
PCBID 0x80
RID 0x0
ideas?
...no way to flash it back....
so... i guess there´s no way to get this back into business... when trying to flash always reports communication error at 0%...
You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.
Farmer Ted said:
You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.
Click to expand...
Click to collapse
ya i just noticed the RAPH100 in his info he posted and the t7272 in the header..mines a RAPH800 and bootloader HAS to have vol + power..anyway, i remember having an issue with something similar with my old vogue..have you tried flashing the shipped stock rom back on? if not, try flashing the stock back on it and if it goes, then try the unlock afterwards. dont fret bud, someone here will get you sorted out
here, i found this as im not well versed in raph100s. its a chart with raph100 roms. im sure some must be shipped stock roms and may be worth a try. sorry i couldnt help more, like i said hopefully someone who knows your device better may be able to help
http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael_WM6.1_ROMs
How about flashing official ROM via microSD card?
patrick_spd4u said:
How about flashing official ROM via microSD card?
Click to expand...
Click to collapse
Download the official rom, right click on the exe and extract it somewhere, you'll get several files, rename RUU_signed.nbh to raphimg.nbh, move it to the root of your sd card and you should be able to install it. It should contain splash screen, radio and os.
No way to flash HardSPL...
Hello, thank you for your help! in fact the volume down+reset works perfect to get into bootloader but every time i try to flash hardSPL or stock rom via USB it says "communication error" and the phone displays a 0% bar...
Windows7 is detecting it as HTC USB Sync.
Thanks..
Farmer Ted said:
You HAVE to flash hard spl off of a pc-it won't work flashing off an sd card (ever, no matter what you try), and I've heard you can run into problems (brick-type ones) trying to flash it off an sd card. It requires a special ruu to run. This is why it's packaged with the ruu, and you're told to only use that ruu for flashing hard spl.
I'm not sure why you're pressing power when trying to go into bootloader. All you need to do is press and -get this- HOLD DOWN volume down and then soft reset with your stylus. You can even press and hold volume down and do a software soft reset. I've used voice command to activate a soft reset shortcut in my start menu, and having vol down pressed sends you right into bootloader. Release volume down only when the tricolor screen appears. You don't need to hold down the reset button with the stylus. Just tap it and you're done.
Click to expand...
Click to collapse
...will try it again...
Hi
In fact the most close to the rom i had on that cell is ruu_signed_1.90.401.1_wwe, downloaded it and will try it again later using sdcard... one thing i wonder is the SPL version which is 1.94.00.00 on my phone.
Sergio.
freakzone said:
Download the official rom, right click on the exe and extract it somewhere, you'll get several files, rename RUU_signed.nbh to raphimg.nbh, move it to the root of your sd card and you should be able to install it. It should contain splash screen, radio and os.
Click to expand...
Click to collapse
The problem was solved by replacing the camera button See last post
Hi,
I've a big problem : I get stuck on the first bootscreen "Smart mobility"
Impossible to enter in bootloader by press and hold the camera button end reset...
Now it's impossible to use the phone. The last thing what I do is to flash with the Pcarvalho last build but the system became very very slow
Is anybody can help me because I searched many forums but I found nothing...
Thanks in advance.
Cheers.
manu33xtro said:
Hi,
I've a big problem : I get stuck on the first bootscreen "Smart mobility"
Impossible to enter in bootloader by press and hold the camera button end reset...
Now it's impossible to use the phone. The last thing what I do is to flash with the Pcarvalho last build but the system became very very slow
Is anybody can help me because I searched many forums but I found nothing...
Thanks in advance.
Cheers.
Click to expand...
Click to collapse
have you flashed via Memory Card? if not, try it...
pcarvalho said:
have you flashed via Memory Card? if not, try it...
Click to expand...
Click to collapse
No, I try directly by USB and it works.... But the system was very slow and I decided to flash again. But no way by USB because the loading process has not been through (is stuck well before setting screen)...
So I tried by the bootloader mode : not be accessed
And for flash with SdCard you need to enter in this mode ...
Thanks for your help if you can.
For your information, I flashed a lot between your version and android, this is the first time in several years that I have this problem.
Cheers.
manu33xtro said:
No, I try directly by USB and it works.... But the system was very slow and I decided to flash again. But no way by USB because the loading process has not been through (is stuck well before setting screen)...
So I tried by the bootloader mode : not be accessed
And for flash with SdCard you need to enter in this mode ...
Thanks for your help if you can.
For your information, I flashed a lot between your version and android, this is the first time in several years that I have this problem.
Cheers.
Click to expand...
Click to collapse
Check this...
http://forum.xda-developers.com/showthread.php?t=425922
[email protected] said:
Check this...
http://forum.xda-developers.com/showthread.php?t=425922
Click to expand...
Click to collapse
Hi,
Thanks for the link. I looked for and try but no effect... In fact my phone is blocked in the first bootscreen and can't mount usb drive I think...
The big problem is I can't access to boot mode by press and hold camera button and I don't know why
Thanks again.
Cheers
Hello, I had the same problem and I solved re-flashed the hard-spl.
adrenalynik said:
Hello, I had the same problem and I solved re-flashed the hard-spl.
Click to expand...
Click to collapse
Yeah... But how ? I can't see the phone in my PC and I can't enter in boot mode... Impossible to get WM6.5 because the boot sequence is stopped a few secondes after reset
Anyway thank you
Cheers.
manu33xtro said:
Yeah... But how ? I can't see the phone in my PC and I can't enter in boot mode... Impossible to get WM6.5 because the boot sequence is stopped a few secondes after reset
Anyway thank you
Cheers.
Click to expand...
Click to collapse
have you Hard Reseted the device?
pcarvalho said:
have you Hard Reseted the device?
Click to expand...
Click to collapse
Hi pcarvalho,
Oh yes, many times... I press and hold the camera button and reset but no effect... Impossible to see the color screen And the phone is blocked in the "smart mobility" view.
Maybe another configuration of button ??
manu33xtro said:
Hi pcarvalho,
Oh yes, many times... I press and hold the camera button and reset but no effect... Impossible to see the color screen And the phone is blocked in the "smart mobility" view.
Maybe another configuration of button ??
Click to expand...
Click to collapse
Remove the battery for 10 seconds than insert it and press camera botton and power botton.
manu33xtro said:
Hi pcarvalho,
Oh yes, many times... I press and hold the camera button and reset but no effect... Impossible to see the color screen And the phone is blocked in the "smart mobility" view.
Maybe another configuration of button ??
Click to expand...
Click to collapse
I had the same problem with my first device.....unfortunately no solution....
adrenalynik said:
Remove the battery for 10 seconds than insert it and press camera botton and power botton.
Click to expand...
Click to collapse
Alas, no effect...
kostas244 said:
I had the same problem with my first device.....unfortunately no solution....
Click to expand...
Click to collapse
****... Sorry but if it is really broken...
Are you sure ? Hope is vital
Thanks.
manu33xtro said:
****... Sorry but if it is really broken...
Are you sure ? Hope is vital
Thanks.
Click to expand...
Click to collapse
I tried almost everything....still now i can't pass the first boot screen...so...i can't go into bootloader mode or make a hard reset....too bad..
kostas244 said:
I tried almost everything....still now i can't pass the first boot screen...so...i can't go into bootloader mode or make a hard reset....too bad..
Click to expand...
Click to collapse
OK. maybe I'll find a way to fix it I hope
Thanks again for your help.
Cheers
manu33xtro said:
OK. maybe I'll find a way to fix it I hope
Thanks again for your help.
Cheers
Click to expand...
Click to collapse
If you find something usefull , pm me please.....thanks and good luck
kostas244 said:
If you find something usefull , pm me please.....thanks and good luck
Click to expand...
Click to collapse
Of course
A glimmer of hope, sometimes, when I boot my phone and press and hold camera button, and connect with USB : my PC detect it but just one time and can't mount really
And I will also inquire if there is not a solution for the dismantling and see...
Is your phone security unlocked ? If so press the power button and the green (send) button to put your phone into diag mode.You will need the motoQ drivers "just search for motoQ or diag drivers".Your screen will be black but you will be able to use mtty commands ie info 8 (check for bad blocks) cego (boot windows).
You will have to connect mtty via com port.
Be careful with mtty it can kill your device.
meknb said:
Is your phone security unlocked ? If so press the power button and the green (send) button to put your phone into diag mode.You will need the motoQ drivers "just search for motoQ or diag drivers".Your screen will be black but you will be able to use mtty commands ie info 8 (check for bad blocks) cego (boot windows).
You will have to connect mtty via com port.
Be careful with mtty it can kill your device.
Click to expand...
Click to collapse
I tested your solution but ... no way ...
I find the plan to remove and also the procedure for entering diagnostic mode but without result so (capture button plus power button : no effect).
It's incredible
This solution will only work if you have hard spl mfg installed,It could be a faulty camera button.
i was flashing my phone right when the power went out, and now its got the tri colored screen every time i turn the phone on, and if i try and flash the phone again, it keeps coming up saying i need to enter recovery mode, so i follow all the steps and the same thing happens...any ideas?
any1 have an idea?
Hi, I can't post you links don't think new accounts are allowed. But if you go to the top of the page, search for "Flashing your First GSM Raphael Rom". Click the first result by "mskip". He has written a great guide with multiple options on how to flash the ROM.
Follow all the steps carefully, and to be on the safe side. If you flashing from your computer over active sync. Keep all open applications to a minimum. Hope this helps.
You can try flashing using your storage card.
SiL3nTKiLL said:
i was flashing my phone right when the power went out, and now its got the tri colored screen every time i turn the phone on, and if i try and flash the phone again, it keeps coming up saying i need to enter recovery mode, so i follow all the steps and the same thing happens...any ideas?
Click to expand...
Click to collapse
Do this: Pull the battery out, then, put the battery back in and then press the power button while holding down the "Volume Down" key. Let go of the Volume button when you get to the tri-colored bootloader screen. Plug in your USB cable, then re-flash... Should do the trick. Let me know if that fails.
Snap... shoulda read your whole post... it's late, lol... Yep, I would try flashing from the SD card, next.