Database Info

Cannot escape from Bootloader - pls help! URGENT

I attempted to upgrade my Orange SPV M500 (HTC Magician).
The tool failed, and did not install anything.
However, my phone has remained stuck on the "Bootloader", displaying a white screen with "serial" if it's not plugged into the Pc, or "USB" when it is.
I've tried different reset techniques, having the battery out for long periods.
My phone booted up once, then silly me I tried the same tool again, and am back stuck!!
I bet it's something simple to press to get it to boot normal - but I just can't see it.
Please help. I know I'm in the right place to ask.
Paul.

Bootloader
you can try camera + record + reset button to get it out off boot loader mode
if it doesn't work you have to flash it

If this doesn't work, just download the correct rom, and run the update program, this will hopefully sort the problem out if pressing the buttons doesn't work.
hope this helps
Mark

bad flashing - hang on start up

hello people...
i don´t know what to do, i was trying to upgrade my prophet...
when i restarted after the rom upgrade..it just stays in the splash screen and do nothing...
active sync don´t work...
someone can give me any advice?
some steps to bring my pda back??
please!!
thank you !!

When using the search you'll find about a thousand similar posts with explanation how to recover.

ringuete said:
hello people...
i don´t know what to do, i was trying to upgrade my prophet...
when i restarted after the rom upgrade..it just stays in the splash screen and do nothing...
active sync don´t work...
someone can give me any advice?
some steps to bring my pda back??
please!!
thank you !!
Click to expand...
Click to collapse
It's a simple procedure of connecting your device to you computer, entering the bootloader and flashing the carrier ROM.
To get into the bootloader, hold the camera button down and push in the reset button for a second or two. Now, release the reset button while still holding down the camera button.
Hello bootloader.
Now, while in this screen, flash your original carrier ROM. That's it.
Good luck!

yeah...
on my prophet i had to push the camera button and the power button together to get into the bootloader mode..
and, it didn´t matter if activesync detected my device...just put wm5 again...and then an upgrade to wm6...
and surfing again....
thank you!!!!
sorry my english!!

i've killed my magican in a very way(

Good Day!
i made a very stupid mistake. i tried to update my Magician with Wizzard ROM.
The process went good, all the steps had been done perfectly, but my MDA crashed totally. The only think, that's happening when i'm pressing on/off button is a once instant flash of display.
I know, that's is too naive from my side to think that there is any hope, but anyway: is there any way how to solve this problem?

pls help me
i was trying to upgrade my magician rom but it stopped in midway. it is showing a dark display and mention Serial on to and v1.00 at bottom.
pls help me how to give life to my pda. have tried to soft and hard reset but didnt work. thanks

do u able to start bootloader (POWER +CAMERA hold and press reset)

Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
I am having the same problems as bplb71....
No way to do a HardReset or Leave bootloader.... It got stuck
Now what??

Cotulla said:
do u able to start bootloader (POWER +CAMERA hold and press reset)
Click to expand...
Click to collapse
found a mgician and it starts but hangs o the align screen
the thing you need to press keeps moving arround the screen for 20 min and then i stopped

i am also having the same problem.,, cant enter the bootloader or hard reset ,,,,,magician is stuck now,,, what should i do now???? i am worried.

happend to me to
i have same problem but when i let battery run out and then plug into wall it boots normally but then it asks to restarts after setup and back to square one help plz

ROM problem-can't do anything!

Hello,
I installed a new rom on my diamond, and everything went fine. Then after the process completed, the phone restarted, but it hangs on the very first screen "Touch Diamond".
There are even no red letters with the version number and stuff.
I can't do anything, because I can't connect it to my pc to put another rom on it. It just doesn't do anything.
pls help me, because I really don't know how to fix this
thx
i got it fixed, thanks to this post http://forum.ppcgeeks.com/showthread.php?t=51508
By pressing the power button, volDown and left arrow an at the same time pushing the reset button, you can connect the pc with the phone, then you can install another rom.
Thank god
grtz

Error Code 224, Active Sync connected but no synchronization

I have a connection to Active Sync but noch synchronization.
So i can't make a Rom update.
I have a ROM from this Forum.
But Yesterday it makes a "self Hardreset" and now i have the Active Sync Problem.
The rom update tool says Error 224
Can anybody help me?

First thing that comes to mind is a RAPI issue - could be security policy related.
Steps to try:
Perform Hard Reset on the device (Vol Down + Action), press Soft Reset button.
Before pressing Vol Up to reboot, connect the device via USB to your workstation.
Press Vol Up and immediately press and hold Vol Down only - should place you in the TriColor bootloader mode.
If the word USB appears in the bottom white area, you should be able to flash a ROM.
If you experience the error again, it may indicate that there is a problem on the workstation.
HTH,

THX,
A very goog tidea.
It Works.

Thanks
Thanks. That fixed it.

error 262 i need help pleaseee!!!
i try to get the 6.5 but i have this error 262 communication errors during the update process ... please somebory helpme..thank u ..

That fixed it for me too. Thanx