Related
So I been trying to upgrade my OS to the tnt 1437, however every time I try my old OS keeps popping up (OS: 5.1.xxx (Build 15671FARIA.3.5)) ... so for the last 3 days I been trying to search this site for any answers, however all I get is that only happens if the CID is locked, but my phone isn't 1) I unlocked it before to upgrade it in the first place to the above mentioned OS and 2) I checked its status with the Wizard Service Tool (which is AWESOME). So i'm at a lose here as to why every time I either upgrade or downgrade the ROM the same OS keeps showing up. BTW Everything else I can upgrade except the OS. Any help is appreciated. thanks!
Anyone? Anything?
Did you remember what version of IPL and SPL when you unlock your Wizard? It is only unlockable when IPL and SPL is 1.xx (i.e. Downgrade to Button's ROM first). You may post your WST log here for more chance to know what the problem is.
Here you go here is the log:
Wizard Service Tool v4.2.1
12/11/07 23:07:22
CPU Manuf. FAILED
MODEL: Wizard
=> Bootloaders:
IPL: 1.01 (G3 device)
Built on Sep 19 2005 at 18:00:32
Copyright (c) 2003 High Tech Computer Corporation
Getting more info...
=> Firmware:
OS: 5.1.xxx (Build 15671FARIA.3.5)
ROM: 3.8
Registry AKU: FARIA.3.5
Radio values FAILED
=>Extended_ROM:
Version: faria V4.0
Name: Extended_ROM
Status: hidden
Getting drives,disks and partitions info...
=> Drives and partitions:
|--Handle--|---Size---|
6e9d5352 - 9.99M (0x9fd800)
eea9813a - 48.23M (0x303c000)
2fb23f92 - 50.95M (0x32f4000)
efb23f3e - 2.94M (0x2f0000)
cfb23fb6 - 3.06M (0x30fc00)
All Done.
Did you flash back to the T-Mobile 2.26 ROM before you tried to flash to another custom ROM?
kegobeer said:
Did you flash back to the T-Mobile 2.26 ROM before you tried to flash to another custom ROM?
Click to expand...
Click to collapse
Yes I tried both the button ROM and the love ROM with no change ... On another note I can change the IPL and the SPL with no trouble however the OS always stays the same.
Not the love or button - the original carrier ROM, either T-Mobile or Cingular.
Have you tried doing a hard reset, and then flash to the T-Mobile ROM from a different computer?
kegobeer said:
Not the love or button - the original carrier ROM, either T-Mobile or Cingular.
Have you tried doing a hard reset, and then flash to the T-Mobile ROM from a different computer?
Click to expand...
Click to collapse
I just tried what you mentioned however I got the following error when I was doing the ROM update .... fyi I got it from the tmobile site ... when I ran the rom update I got:
error [326]: invalid command
this nbf file cannot be used for your pda phone. please check your nbf file.
It looks like you originally skipped the 2.26 rom. I did the same thing the first time I flashed a rom. Try flashing back down to the Button rom, then to the 2.26, then the tnt 1437. It worked for me.
Am I doing something wrong here cause every time I try some downgrade its always the same OS that shows up ... 3.3.0.0 that NEVER changes, everything else does.
i have the same problem..
8125hacker said:
i have the same problem..
Click to expand...
Click to collapse
What OS does your phone boot with?
bad flash rom, you need junk the phone or donate to XDA-developers
first take out the sd card.then flash your phone with buttons 1.0 rom.hardreset. then flash it again with buttons rom. unlock the device totaly with the unlock software. hardreset. flash with original t-mobile us 2.26 rom
halfway above 80% pull the usb plug. the phone get stuck and the update program will tell you it doesnt respond. reset the phone (little hole on the side) you will see the 3 color screen . now restart the 2.26 update and when
you get at the part that it starts looking for the phone connect it. sometimes
it just works , sometimes you need to try a few times.. it wont ruin the phone
as i had this many times due to a crashing computer. wjen its done do a hardreset and install the rom you wanted.
hope this helps you guys
da_jojo said:
first take out the sd card.then flash your phone with buttons 1.0 rom.hardreset. then flash it again with buttons rom. unlock the device totaly with the unlock software. hardreset. flash with original t-mobile us 2.26 rom
halfway above 80% pull the usb plug. the phone get stuck and the update program will tell you it doesnt respond. reset the phone (little hole on the side) you will see the 3 color screen . now restart the 2.26 update and when
you get at the part that it starts looking for the phone connect it. sometimes
it just works , sometimes you need to try a few times.. it wont ruin the phone
as i had this many times due to a crashing computer. wjen its done do a hardreset and install the rom you wanted.
hope this helps you guys
Click to expand...
Click to collapse
Out of curiosity when I downgrade to any of these roms am I looking for the OS to downgrade or just the IPL/SPL?
cgigate said:
bad flash rom, you need junk the phone or donate to XDA-developers
Click to expand...
Click to collapse
how is it a bad flash rom if the IPL/SPL and GSM all change everytime i change roms. The only thing that doesn't is the OS.
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
Wm6 Roms can only be upgraded if you have an IPL/SPL 2.xx,as I can see from your present Rom version 1.1.7.5,you must be having IPL/SPL 1.xx,therefore,it's not possible to upgrade to wm6,untill and unless you upgrade your phone to IPL/SPL 2.xx.
First flash T-mobile 2.26 to upgrade to 2.xx and then flash any wm6 rom.
Good luck
be sure that unlock means both "cid and sim" unlock, because sometimes it is network unlocked only, you can use your device with different networks using different simcards, to flash a rom you need the device cid unlocked, read the guides
Hi , thanks for the reply, i must mention that my phone is a QTek 9100 please tell me if the T-mobile 2.26 will install on my phone. if it can please can u give me a download link to it.. I've been searching the site but i haven't found any..
nannhy
Are u sure your phone is CID unlocked? use the wizard service tool to be sure. U can download the t-mobile ROM here: http://www.t-mobile.com/wmupgrade/ You need to have a t-mobile phone number. If u dont know any, PM me, and ill let u use mine, u dont have to pay, its just to make sure that ur a t-mobile customer.
nannhy said:
Hello and good afternoon, I'm a beginner and i've read a whole lot and decided today i'd take the plung and upgrade my qtek9100 to wm6,current status of my phone=NOT WORKING(sorta).
Rom version = 1.1.7.5
Rom Date = 9/22/05
Radio version= 01.01.10
Protocol ver = 4.0.13.16
ExtROM Ver = 1.1.7.105
downloaded TNT 1437 Series Pro+home and i ran the upgrade (oh my phone was brought unlocked) all was going fine it went to 99% then exit with communication error, i followed the recovery info and tried again and again, then i tried 3 other ROMs and still the same error occurs, my phone is now stuck at the 3 color bars from the recovery process and it wont upgrade to wm6.. update i then downloaded XDA_Mobile_6_r2a_Lite and installed it and all went fine, the thing is this isnt a wm6 it's wm5 so i'm back to where i started.. can anyone please tell me what i've done wrong and how i should go about getting my phone upgraded to wm6, i actually want to use the TNT roms..
nannhy.
Click to expand...
Click to collapse
XM6R2a is NOT wm5...if you "installed" it and you are still on wm5 then your phone is NOT cid unlocked which is probably what the communication error (302?) was trying to tell you in the first place. Follow the "how to flash a wizard" guides that are a sticky at the top of the forum.
Hey thanks to everyone who have been offering information, my progress so far, i've CID unlocked my phone and i reinstalled the pro+home wm6 and all is working, except i cant use my camera, cause i dont have enough memory as is replied by the os, i'm going to try the t-mobile updated as pointed out in a previous post.
Phone is 750v, recently updated to WM6.0 from the Treo website under the 2.18 version, branded to Vodafone (starts up with voda logo), but not locked to telco providers (can change sims).
I've exhausted all me options and info from the various forums.
I've tried everything from kaiser hardspl, kaiser custom ruu, using the sd card to install the cheeimg of the 6.1 rom, cheetahunlocker, hardspl 1.1/2/3 and so on, and etc related programs. Practically everything.
Upon installation progress of ROM, either at 1 or 7% the screen either goes black/blank and the device restarts or the error 207 appears. For smaller .nbh files, progress hits 100% and within split second screen goes black/blank. The rom is not updated in any of these circumstances
I am able to restore the rom using the application downloaded from treo website. By that I mean even restoring 6.0 over 6.0. This concludes that it is possible to install rom updates using the treo provided app.
But not other apps. I'm exhausted. Do not have a solution.
Does anyone know how to resolve these issues to upgrade rom from 6.0 to 6.1.
Hello all,
I am in crisis situation.
I purchased the touch cruise (polaris) from authorised dealer in the middle east (my polaris is middle east version) came with wm6 SPL 1.28.000. ROM 0.0.415.2 (sorry I had saved the details in one of the files but I guess it got deleted. so I dont remember which ROM version I had)
I wanted to test the diamond TF3d style, so I upgraded. below is the steps I took
1. Hard spl - v2
2. downloaded _HTC Touch Cruise_RUU_Polaris_HTC_WWE_3.13.405.0_radio_sign_25.85.30.07_1.59.42.15_Ship.exe
3. installed the same.
4. Installed HTC-CA-Polaris drivers and TF3d.
5. I read somewhere that it works slow and need to upgrade Radio to 1.59.42.23. I did that.
but now my GPS is not working with Garmin also tried TOm TOM which is installed by the WM6.1 upgrade, no luck even the phone is too slow
I want to revert to the original version. please help me find the ROM download and steps to downgrade to original. I can downgrade the SPL to original but need to have the ROM first bcos I dont want my phone to be total dead.
need urgent attention from the experts.
thanks in advance
Niranjan
In my experience downgrading radio is bad thing to do.
When I did it, my signal has weakened radically, and I lost WiFi stability and almost lost BT.
However, hardware was not damaged, so I have normal reception after turning back to the official WM 6.1. So I guess you will need to hack your device again, or wait for newer ROM...
Oh, yeah... I never did hard-SPL...
I want to upgrade my good old Magician from ROM 2.03 TX WWE to the new Windows Mobile 6.1. But it doesn´t work. Tried also to downgrade to 1.13 ROM (with no extended ROM) but had no success. Has anybody any idea what can i do to get 6.1 to work on the Magician? That would be great !!!
Thanks for your interest and i hope someone has a solution for me!
greetings from Germany
Hubie53
I have the same Problem. But it's not just that I can't upgrade to 6.1... I can't do anything. I tried to get different Roms on my Magician. The original Rom too...but nothing works. All that since I tried the 2.03TX Rom... The 2.03TX is working nice at the moment but I would prefer the original one or WM6.1 Please help!!!
I had no problem switching between tx and 6.1 - both directions.
The only thing I had to be aware of is the radio version. 2.03tx doesn't install it's own radio and last cotulla rom requires radio 1.12.
my O2 mini can't upgrade any WM6.1 ROM. It's 64MB RAM and 64MB flash.
phamhien said:
my O2 mini can't upgrade any WM6.1 ROM. It's 64MB RAM and 64MB flash.
Click to expand...
Click to collapse
Check following 3 points:
1. Make sure your device is a "Magician"
2. Make sure the downloaded ROM is one of Cotullas WM6.1 (O1 , O2 or O3)
3. Befor flashing make sure the Radio on the Magician is version 1.12
Yes, it is a Magician, the ROM is Cotulla´s 6.1 Beta 7 (03), and my Radio is 1.12. But my PC says no USB! A problem with Vista, perhaps?
Flashing the Magician on a Vista PC does not work, this is a very old stuff.
Use a PC with XP-Pro and everything will be fine.
targets said:
Flashing the Magician on a Vista PC does not work, this is a very old stuff.
Use a PC with XP-Pro and everything will be fine.
Click to expand...
Click to collapse
I have xp, and many problems with connect magican to the pc in bootloader.
maybe i can change bootloader or reload it? where i can get some bootloader to the magican?
sory for my english (im from polish)
kamillo-s said:
I have xp, and many problems with connect magican to the pc in bootloader.
maybe i can change bootloader or reload it? where i can get some bootloader to the magican?
sory for my english (im from polish)
Click to expand...
Click to collapse
Maybe you have a problem with your PC, maybe you are doing wrong, or maybe your Magician is corrupted.
I don't know much about the bootloader, guess it is on his own chip and not changeable at this time, otherwhise it could be a part of the rom but i have never seen a Magician bootloader-file for itselfs.
hubie53 said:
Yes, it is a Magician, the ROM is Cotulla´s 6.1 Beta 7 (03), and my Radio is 1.12. But my PC says no USB! A problem with Vista, perhaps?
Click to expand...
Click to collapse
try to change the usb port to another....
or make sure u have the newest activesync...
Thanks for your help! i 've upgrade succesed for my magican!
I try update on other magican, and was succesfuly. I think I cant update rom after instaling 2.03 tx that something was broken or its something wrong witch magicans software. I have this same model of magican ,and other rom, and I can flash it.
same same here
i had the same problem with my magician i think it happens with some devices not all of them i couldn't find any way yet to solve it.
WM 6.1 for Magician-a fake?
Managed to flash my device with Windows XP. Works fine, thanks to all helpers!!!
dead.....!!!!
wiuh,my services i-mate jam dead after upgrading.
i got in bootloader mode n upgrade radio rom to 1.12 use this rom NL_11300_131_11200.exe.
i deleted nk.nbf, and ms_.nbf, so just radio.nbf
upgrade success!
then i try to upgrade with the same rom(NL_11300_131_11200.exe) without radio.nbf. fail it say error id country.ok then i try the other rom.
JAM_WWE_11200_128_11210_ship.exe
i deleted just radio.nbf,because i just want to upgrade the rom.
at ext rom upgrade it success.but when maybe about 30% uprade rom,it fail. and say error.i forgot the error.
and my i-mate dead. :'(
if i put usb cable n open the back case(baterai still in side or not) the lamp red is on.
but when i closed the back case.it turned off.
nothing happen,no indicated the pda was still connected.activesync has no sound.usb on device manager didnt indicated there was a pda connection.
so??
what must i do now?
??? this is not mine.if mine i dont care too much,but this my costumers!
anyone can help pls!
i beg u.pls!
learnig said:
wiuh,my services i-mate jam dead after upgrading.
i got in bootloader mode n upgrade radio rom to 1.12 use this rom NL_11300_131_11200.exe.
i deleted nk.nbf, and ms_.nbf, so just radio.nbf
upgrade success!
then i try to upgrade with the same rom(NL_11300_131_11200.exe) without radio.nbf. fail it say error id country.ok then i try the other rom.
JAM_WWE_11200_128_11210_ship.exe
i deleted just radio.nbf,because i just want to upgrade the rom.
at ext rom upgrade it success.but when maybe about 30% uprade rom,it fail. and say error.i forgot the error.
and my i-mate dead. :'(
if i put usb cable n open the back case(baterai still in side or not) the lamp red is on.
but when i closed the back case.it turned off.
nothing happen,no indicated the pda was still connected.activesync has no sound.usb on device manager didnt indicated there was a pda connection.
so??
what must i do now?
??? this is not mine.if mine i dont care too much,but this my costumers!
anyone can help pls!
i beg u.pls!
Click to expand...
Click to collapse
thx the problem was solved.thx
hubie53 said:
I want to upgrade my good old Magician from ROM 2.03 TX WWE to the new Windows Mobile 6.1. But it doesn´t work. Tried also to downgrade to 1.13 ROM (with no extended ROM) but had no success. Has anybody any idea what can i do to get 6.1 to work on the Magician? That would be great !!!
Thanks for your interest and i hope someone has a solution for me!
greetings from Germany
Hubie53
Click to expand...
Click to collapse
i Have flash my jam with 2.03 TX WWE and then downgrade to original i mat jam
after a month i flashed it again and can't downgrade or upgrade or do anything for 1 1/2 year
i tray many things like sd flash and many roms but it didn't work
may be Mr.Cotulla have a solution for it or any one have it share it to us
the only thing we can made is to inter the boot loader mode
Thanks