Phone is 750v, recently updated to WM6.0 from the Treo website under the 2.18 version, branded to Vodafone (starts up with voda logo), but not locked to telco providers (can change sims).
I've exhausted all me options and info from the various forums.
I've tried everything from kaiser hardspl, kaiser custom ruu, using the sd card to install the cheeimg of the 6.1 rom, cheetahunlocker, hardspl 1.1/2/3 and so on, and etc related programs. Practically everything.
Upon installation progress of ROM, either at 1 or 7% the screen either goes black/blank and the device restarts or the error 207 appears. For smaller .nbh files, progress hits 100% and within split second screen goes black/blank. The rom is not updated in any of these circumstances
I am able to restore the rom using the application downloaded from treo website. By that I mean even restoring 6.0 over 6.0. This concludes that it is possible to install rom updates using the treo provided app.
But not other apps. I'm exhausted. Do not have a solution.
Does anyone know how to resolve these issues to upgrade rom from 6.0 to 6.1.
Related
Hi all,
yesterday, i thought it's a nice day to do the official german t-mobile 1.12 upgrade on my official german t-mobile mdac. It wasn't.
After the upgrade (no errors) the bootscreen shows:
no gsm, and only one Version number: 1.12.01 Ger
on the bottom line.
After it bootet, i get no gsm and no bluetooth working. When i connect by usb, active sync hangs for about 3-5 minutes. If i try to repeat the upgrade, i get something like wrong device, and it shows empty fields on the version screen. I tried to do the update by extracting the official update rar and start the update by MaUpgradeUT_noID.exe, but it says something like wrong device.
I tried this to the same with the 1.13 upgrade from the xda ftp, same thing. I tried a rombackup from sd-card that i found somewhere on the net, but the bootloader says wrong section=1 not allowed.
Is there anybody wo could help me to resurrect my poor little mdac?
Thanks alot,
J
Hi J.
Don't know how to solve all your problems with upgrading, but did you copy the first bytes of your own romdump to the downloaded rom? Otherwise your device won't accept it, you can find a lott about this in other threads. try searching for BigStorage and you will everything about rom upgrades.
Good luck, M
Upgrade your device with the imate rom 1.12 wwe using MaUpgradeUt_noID.exe ,it should work ,then try to upgrade to the german rom upgrade.
Good luck
ongoing revival
Ok, i tried that big storage thing, i replaced the id in the new image from my backup (broken) rom, and when trying to upgrade from sd-card, i get Section = 1 not allowed update.
I'm trying to upgrade the radio stack from the bootloader screen with MaUpgradeUT.exe, but it seems that the usb port doesn't work: for 10 minutes, the update screen stands at 0%, then an error appears:
Radio Rom Update Error.. i should reset, reconnect and retry.
Any more ideas? Is there a possiblity to do the normal "online" update (not via bootlaoder/backup-image) just from sdcard?
Please Help
J,
Last night I did a BigStorage in a very easy way. I followed the description in the thread about upgrading to radio 1.13. You'll have to unzip the shipped rom, decode nk.nbf it with dnbf. Then you replace the usual bit pattern and encode nk.nb1 again. After that you can use maupgrade with or without the noid function like a regular apgrade.
Hope it helps you, M
The story: Received an new O2 XDA NEO from Germany. Being portuguese I don't know nothing of german idiom. I dowloded the JAMIN Eng. rom from the FTP and tryed to unstall this rom. With the ROMUpadte utility that comes with the ROM I get an error. With the ROM Update Utility_NOID the process stars and go normally until 95%. Here, after some minutes give me an error saying I can't upagrade with the NBF file.
I was a little passed out thinking that instead a phone I had a brick. Pul out the batery for moments. After I turned on the phone and it shows the tri color scren of bootloader. Ok conect the usb cable again and start the upgrade to the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID. and voila... the process completed without problems.
The weird thing is why my phone doesn't accept the JAMIN rom?
Anyone has an expplanation for that? Thank you
can you tell me wehere i can download a jamin rom ? then i can test it with my o2 xda neo
I upgraded my Neo to jamin rom without a problem. I was using the RomUpdateUtility by machinagod, which you can find in this forum. But now I have switched to RUU_2151327..._DOP_ASIA_WWE too. To me, the new version DOP_ASIA_WWE rom works much better than that jamin. More fast, more effective. The JAMIN always runs out memories and makes the CE-Star chinese input inactive, especially when WiFi used. The DOP_ASIA rom rarely meets such problem.
Upgrade rom
You can only upgrade rom but can not downgrade. So now you are at 2.15
but Jamin is at 2.13.
Hi,
upgraded qtek s200 with RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe, using ROMUpdateUtility-NoVendorID.zip, which does not check Vendor ID.
No major issues so far. During boot dispays Dopod instead of QTEK .
Besides, few differences I found in voice diler and new program called AutoConfig. Appears, to configure automatic settings for your GSM carrier, but only for ASIAN operators, which is useless to me. No worries, interface still English.
It was mentioned few times in this forum, that you may experience some "delays" during flashing your device - don't panic, don't touch it, just wait for some time, it will finish on its own.
Good luck with upgrades.
de yl1wc
Ok...
I have successfully upgraded my Cingular branded 750 from WM5 to WM6 using the bootloader method. However, my Software Version still reads TREO750-1.13-CNG.
Is there a issue with this? Do I lose any WM6 features if my v is not 2.23? My firmware is 1.54.00.00, so, it's ok there.
I also tried to use the Update method. I changed the payloads.xml file to the correct settings for my phone. Device changed to CNG (ATT did not work) and 1.16 changed to 1.13, and high changed to 1.16, 2.23, and 2.24 to try all I have seen.
When the update starts (after changing the xml file) the display on the updater reads loading files, then when it begins to start the update, my phone display says "Goodbye" shuts off like I had hit the end button to turn off the radio, and goes to a screen that has 4 horizontal color bars (R,G,B,W) and then the updater says that it lost the connection to the phone. I'm screwed after this point.
So, if there is no issue with the 1.13, then I don;t really care about the above. At 1.13 the phone is working.
If there IS an issue, then does anyone know why I cannot complete the update without the phone disconnecting from the updater?
Update.
After reading some other posts elsewhere, someone made a veiled reference to my 2nd issue with the loss of connection during the update, and suggested plugging the Treo into my PC while already in bootmode[. No drivers tried to load, so after a quick trip to device manager, and a reinstall of the driver, the Treo no longer disconnects during when the updater switches the phone into bootmode. It's updating as we speak.
The bootloader method does not upgrade all aspects of the phone's ROM. You need to use the .exe method, but you'll need to edit the .xml file that is created in your temp dir after the FIRST STEP of the installation program.
Search around. This has been discussed a million times.
Hi folks,
I used the CheetahUnlocker.exe and went through all three steps.
But no matter what SIM card I insert, the phone doesn't get ready. When I want to open phone settings or even just to open the keypad, my Treo tells me the phone was not ready and that I had to wait for 15 seconds.
Well, I'm tired of waiting Is there any ROM I can flash to just fix the phone?
I used the WM6.5ROM from this thread:
New!! WINDOWS MOBILE 6.5 "23017 R2" SYS/XIP ROM ~ Updated: 8/6/2009 by navenedrob
I have the same freakin problem ... Any help on this issue PLEASE!!!!!
Try flashing the official rom first. It'll update the radio, then flash the 6.5 rom.
ive got a t-mobile wizard 200 dutch edition
i had a win 6.5 rom loaded and it worked fine
but for some wierd reason i wanted to downgrade it to the original win5 rom
when i was at 55% my 1 year old sun pulled the usb cable
now i can't get any new rom in the phone that works
is there anyone that could help me
everytime i get the bootloader screen and that's al
Don't give up hope. As long as you can get the bootloader screen, you should be able to burn a rom. Try the CR96 WM6.5 ROM, in my signature, which if I remember right comes with a Vista RUU. If it doesn't, search this forum for Vista RUU, which I have found to work well for installing ROMs from the bootloader, in XP or Vista. I don't know about Windows 7, since I have never had it.
i've tried the link you sugested
after running the update the startup screen of the phone changed from t-mobile to a HTC logo and after that it shows the bootloader and nothing more
ipl 2.18.001
spl 2.26.001
is there anyone with an original rom for this phone becouse the one i thought was original is damaged and maybe an original rom can repair this phone
or is there anyone with different idea to solve this problem ?
edit: i found an original german ship rom but when i try to laod that on the phone he gives a error
something with wrong phone id
edit: i found a file with t-mobile g4 ipl/spl after i loaded that one
ipl changed to 2.26.001 spl stayed 2.26.001 but stil no respnce to loading roms
i found a threat where they where talking about the love rom
i downloaded it and uploaded it to the phone and everything was back online and i could do anything again with the phone