Related
Anyone tried this headset with a non nokia phone.
Eg a universal.
Wondering if the SMS/MMS indicators work?
HS-12W
Greetings GDawes,
I'm using the Nokia HS-12W with my O2 Exec using the Qtek ROM.
Streaming/audio controls are all good. However SMS (icon) indications etc
don't seem to work.
Hope we find a way to implement this feature soon.
Nice-up.
What about caller id names from phones contact list?
Does the caller name show up on the headset for incoming caller id
Caller I.D on HS-12W
No mate. All I see are numbers.
Still think it's one of my best buys in recent years though
You are right! Got one from Expansys this morning and soon after charging fully it has been hanging around my neck tuned in to FM. Sound quality is also good.
Using it with Atom. No names adre displayed.Hope a solution is found soon.
Victor
Guys whats your range like, i get no more than a meter away from my phone and the sound drops out, also have a hiss in the background that is really annoying at low volumes any thoughts ???
1 meter :evil: :?:
What is your device? Within the same room I don't get any issues. No hissing on my Atom 8)
I am using a Tornado not very happy at all
I am using a Tornado not very happy at all
hs-12w and magician
Hi,
I just bought the HS-12w. Paired it without a problem with my Magician (using the a2dp patch). The problem is the hissing sound at the high end when playing mp3s ... I don't know if this is because of the headset itself or because of the magician and the patch ((
Br,
Deyan
problems fixed
I fixed the sound quality problem by changing a registry setting (increased the bitrate of the streaming to the headset). Quite happy now with the quality
Br,
Deyan
Re: problems fixed
deyanp said:
I fixed the sound quality problem by changing a registry setting (increased the bitrate of the streaming to the headset). Quite happy now with the quality
Br,
Deyan
Click to expand...
Click to collapse
where is this registry setting?
Unfortunately, there are major incompatibility problems with current Pocket PC models and stereo Bluetooth headphones – to the point of being completely useless.
For example, I’m unable to use my – otherwise excellent - Plantronics Pulsar 590A with the built-in A2DP (that is, stereo headphone) support of my Dell Axim x51v and HTC Universal (both having AKU2+ ROM’s; that is, their built-in Microsoft Bluetooth stack already supports A2DP). Some 200-400 milliseconds after starting to play anything (there is no such problem with system sounds – clicks and so on), the headphone just goes quiet, and the sound will only return after 5-10 seconds. To get lost again, of course, if I (re)start playing anything in any media player.
Fortunately, I have no such problems with my WM5-upgraded (2.01) HP iPAQ hx4700, the Dell Axim x51v with the Widcomm hack, the iPAQ 2210, HTC Wizard and Fujitsu-Siemens Pocket Loox 720 (the latter three with various hacks and other, smaller problems; the first two has no real problems, the x51v with the Flow hack).
People with other headphone models have wildly different problems. Most of them is the “skipping” problem – the sound just stops for some hundred milliseconds or some parts of the sound stream is just ignored.
In this article, (in addition to my already-published, Widcomm-only global bitstream speed setting (BTSpeedSwitcher) and FlowControl article) I elaborate on how the two A2DP implementations (Widcomm, Microsoft (MS)) can be fine-tuned to make your headphones work.
1.1 Communication speed
Most skipping or quieting problems are caused by the too high communication speed between the PDA and the headphones. In these cases, you should first decrease this speed to see whether it helps. If you can get rid of the skips without scarifying much sound quality, then, you can actually make your PDA and headphones compatible.
1.2 Modifying the given values
All the values I’ll elaborate on in this article don’t exist in the Registry by default. This is why I’ve also provided registry import files – you’ll only need to click them from inside Resco Registry Editor (File / Import), the, in my opinion, (for the price) best registry editor for the Pocket PC as can also be seen in the Registry Editor Bible.
These reg. import files contain some default values, which you will most likely need / want to modify with the registry editor (to slightly decrease / increase to decrease the communication speed to get rid of the problems or increase it to have better sound quality, respectively). With most devices (in this test, PL720, hx4700 and x51v with both BT stacks), after you modify a sound quality-related value in the Registry, you’ll only need to restart the BT stack to be able to test the modified value. That is, explicitly stop and restart the BT unit. With the Widcomm BT stack, you’ll need to click “Turn Bluetooth OFF” in the context menu of the BT icon and, then, staright go back to Bluetooth Manager and just reconnect the headphone. With the MS BT stack, in Bluetooth Settings, just untick the “Turn on Bluetooth” checkbox and click OK (or, if it has a Communication Manager dialog like PPC Phone Edition devices, stop BT there); then, re-enable BT and reconnect to the headphones by going back to Bluetooth Settings and selecting “Set as Wireless Stereo” in the context menu of the given stereo headphone.
Note that this (a simple BT stack restart is sufficient) is not the case with the HTC Wizard: with it, for the changes to be registered, you’ll need to power the device completely off by long-pressing the Power button and answering Yes to the question about completely powering down the device. After it is shut down, just press the Power button again and it’ll reboot. It's only then will the changes have effect.
2. Microsoft BT stack: BitPool
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\A2DP\Settings\BitPool
(Registry import script available here)
With the Microsoft BT stack, you can set the BitPool value, which has a direct effect on the communication speed between the PDA and the headset. Unlike with the Widcomm BT stack, in here, you can’t directly supply the number of kilobytes the PDA will transfer the sound to the headphones. Here, you’ll need to multiply the value of this registry entry with 6.5 to get the approximate value of the transfer rate.
To fix most skipping problems, you will want to decrease this value (and you will want to increase it to try to enhance the sound quality).
Unfortunately, decreasing it may result in a horrible sound quality decrease. For example, in my tests, I’ve found out that only with the value 24 can I have uninterrupted music transfer between by Dell Axim x51v (with the original MS stack) and my 590A. With any value over that (even 25), there started to be skips.
Increasing it will not necessarily result in a far better sound quality. On my HTC Wizard ((European) MDA Vario by its origins with the KTamas / bepe AKU3.2 RC1 ROM on it), which has a very bad A2DP sound quality by default, increasing this value to even 120 didn’t help – the very bad “typical for non-filtered contents sampled at a low sampling frequency” distortion remained. That is, you can’t raise the sound quality of the Wizard; not even with extra high BitPool values.
I’ve also played a lot with the MinBitPool Registry value (under the same key; see this forum post), without any success (on my Wizard). That is, at least with the current Wizard hack, it’s pretty futile to try to play with MinBitPool, it seems.
The same stands for SampleRate: it has no effect at all, it seems.
More info here (AGAIN, please note that setting SampleRate, MinBitPool and MaxBitPool don’t have any effect, at least not on the Wizard!)
3. Tweakability of the Widcomm BT stack
Unlike with the MS BT stack (which only has one parameter to be tweaked), there are far more locations / parameters this stack can be tweaked at.
Note that here, I don’t elaborate on the two previous hacks to combat the “transmission stops after a few dozen minutes; otherwise, it's pretty OK” problem – please see the already-linked global bitstream speed setting (BTSpeedSwitcher) and FlowControl article if you have the previously-mentioned problem. The hacks described in this article “only” help with constant skipping problems (and transfer quality fine-tuning), which are completely independent of the subject of my previous article.
3.1 LineSpeed
HKEY_LOCAL_MACHINE\SOFTWARE\Widcomm\Plugin\AV\LineSpeed
(Registry import script available here)
This registry value is very similar to the above-introduced MS BT stack-specific BitPool. The difference is that it allows Widcomm users to directly supply the bit transfer speed between the PDA and the headphones – no multiplication is necessary.
The valid values start with 64 (that is, 64 kbit/s), which results in intolerably bad sound quality. 128 is still very bad; it’s with 192 that the sound quality starts to become acceptable. With 256, it’s already pretty hard to distinguish from the sound quality higher values result in – that is, you’ll want to start with the value 256 (and only slightly decrease to see whether it helps get rid of the problems).
I’ve even tested my Pocket PC’s with extremely high (400-600 kbps) values; they haven’t delivered noticeably (or at all) better sound quality than, say, the 320 kbps setting and they rendered the transmission far more unreliable / unstable, if working at all. For example, even at 400 kbps, my iPAQ hx4700 paused and skipped from time to time; at 600 kbps, it only played for some 20 secs and, then, went quiet. The Pocket Loox 720 fared a bit better at even 460 kbps but, again, the sound quality gain (if any) wasn’t worth the trouble and the additional BT communication load.
Speaking of the PL720, I’ve also tested whether a slightly lower, but still very good transmission speed (256 kbps) completely gets rid of the need for the FlowControl hack (again, see my previous article on the latter). While it played music for more than two hours, around the third hour, it stopped playing. Furthermore, it still had slight pauses (albeit I haven’t noticed playback at a higher pitch in the following 8-10 seconds). That is, you won’t want to completely get rid of the FlowControl hack. (I’ve also tested the PL720 with the FlowControl hack disabled and at 460 kbps – as opposed to the pretty stable 256 kbps. It shuts down itself after 3-4 minutes and, therefore, is useless, as I’ve expected.)
3.2 Blocks and SubBand
HKEY_LOCAL_MACHINE\SOFTWARE\WIDCOMM\Plugin\AV\Blocks
and
HKEY_LOCAL_MACHINE\SOFTWARE\WIDCOMM\Plugin\AV\SubBands
(Registry import script available here)
These two values can also be used to fine-tune your transmission parameters under the Widcomm BT stack. They are settable between 4 and 16. With higher values that 16, the Pocket PC won’t connect to the headphones; with lower values than 4, nothing will be heard (not even system sounds – clicks and the like). The lower the value, the worse the sound quality.
Of the two, the second, ‘SubBands’ parameter has a much less effect on the sound quality as the first (Blocks). For example, if you leave Blocks at (the best) 16 and set SubBands to 4, the sound quality will degrade only slightly (and, with the SubBands value of 8, it’ll be almost impossible to notice any quality difference). It will be in no way as bad as, say, using 128 kbps LineSpeed and will still be much better than the A2DP sound quality of the HTC Wizard.
If, on the other hand, you set Blocks to be 4 and leave SubBands at (the best) 16, the sound quality will be considerably worse. It’ll be, say, as setting the line speed (see section 3.1) to 96 kbps.
That is, first, start play with the SubBands value. Decrease it to, first, 8 and if it doesn’t help, 4. Then, if the latter doesn’t result in any usable result, start decreasing Blocks. Again, descreasing Blocks will have a very bad effect on the sound quality.
Note that Blocks only seems to have effect on 1.7 Widcomm versions; 1.5 versions (like the PDA2k upgrade usable on the Pocket Loox 720) don’t take this value into account at all. (Haven’t tested it with 1.6 like the HP update usable on WM2003 and some WM2003SE devices.)
(These three hacks were originally discovered by the well-known mikespikel in this thread.)
3.3 Other additional registry values available in desktop Widcomm implementations and some forum posts
I’ve also thoroughly tested the desktop Windows values listed here. They allow for tuning the bits-per-sample ("BitsPerSample"), setting the sampling frequency ("SamplesPerSec"; the case is similar to the “SampleRate” case of the MS BT stack) and setting the number of channels (mono or stereo; "Channels"). None of them seems to have any effect. If you still want to give it a try, the registry import script is available here.
Hi,
I am using O2 xda mini s, and i just bought a sony ericson HBH-DS970 stereo bluetooth earphones.
I am using WM6 Xplorer Rom and radio version 02.25.11.
Currently I am a bit frustrated with my bluetooth earphone as the quality is very poor eventhough I read that the quality of the sound if used with other bluetooth handphone / pocket PC is superb.
I have ben searching this forum to either tweaks the registry or any patch to improve the sound but currently I'm still lost. I found one old post (WM5) which guide us to tweaks -> HKLM/software/microsoft/bluetooth/a2dp/settings....
but my problem is that there is no settings folder under my a2dp, there are 4 folder with label 1,2,3,4.
Are there any way i can improve the sound quality???
will changing the radio rom affect the quality of bluetooth reception??
Please enlighten me..
Thanks
http://forum.xda-developers.com/showthread.php?t=297762&page=100
Try the settings from cduncan...
If there is no registry entry, you will have to manually put them.
You can change the bitpool setting for quality of music.
HTH
Cheers Sids,
I have already do as you said... previously went to that post but feel lost, and since the thread have over 100 pages, therefore i feel inappropriate to ask you or duncan.
One more thing though, can i ask you what is your personal preference on those settings?? I cant put a lot of bass, because it will sound terrible, like broken speaker.. what todo??
cheers mate
p/s My problem is that the quality of the sound that coming out of my BT earphone is just poor (although others are highly recommending this DS970). I have no problem with pairing it with my wizard or the playback.
I have play around with the BitPool and the only difference that I notice was the volume level, not the sound quality. any advice??
One more thing, is the selection of Radio Rom have any effect to the quality of the bluetooth signal i.e. to the output in my BT earphone??? Help...
Thanks again
Hi,
I cant say about your BT headsets. But I confirmed these things - Updated firmware from the manufacturer (Jabra for me) and the quality with other A2DP enabled (maybe nokia/SE) phone.
I have set my bitpool setting to 60 which is Farias default, but he placed the reg entry in AD2P folder instead of A2DP by mistake.
I am using equalizer settings with TCPMP for the nice sound, which I dont get with Windows Media Player. Maybe you could try that out.
Even after those settings and tweakings, I dont think BT headsets can replace wired headsets for an audiophile. You will only just get passable sound quality. Maybe its got to do with bandwidth that BT provides.
Lastly, I may be wrong, but Radio roms are only used for GSM radio. Its got nothing to do with BT.
Gurus, please correct me if I am wrong anywhere.
Sid
I'm using faria ROM Real Thing and using Oakley OROKR as my bluetooth stereo. But I have unusual problem. When I listen MP3 from pocket music 4.3.4 my OROKR produced a lag sound. Sometimes the sound was disapeared and suddenly back to normal again (with lag of course). I have try my OROKR with my PALM Treo 650 using A2DP s/w it's produced same quality like my MDA. Is this happen cause the registry setting or my OROKR problem? Help me?
PS: If I used OROKR to call it's 100% normal
For what it's worth, i have tested my plantronics pulsar 590a (bt ver2) with other htc devices with bluetooth ver 2 and audio was excellent. the wizard only has bt ver 1.2 and that is maybe where sound quality is lost. just a thought...
did you buy the headphones on ebay? Got mine on ebay and I was very disappointed with the sound quality. i checked online and, for my surprised, i discovered that what I got from ebay was a cheap fake. I bought a new set from sony shop and voila, they work perfect. Sound is amazing..with the SE k800i i am using from time to time. Couldnt get them to worjk with my xda2i tho
I thought it would be nice if we cfoudl get some Q&A going about this topic.
I'd like to hear which Tornado ROMs seem to have good working A2DP, which BT stack they use (if you know), what headset/remote you're using.
I'd also like to know if anyone can give use directions for checking what stack our phone is using.
I'd also like to know your opinions on volume, hiss, etc.
If you are satisfied or unsatisfied with your volume, please include your audiogain settings for comparision:
HKLM\SOFTWARE\HTC\AUDIOGAIN
(note: audiogain settings are in hexidecimal)
Here is some info on A2DP reg tweaking, that is supposed to be relevant to the WM6 bt stack.
i.e. from the "final" or "official" released, not a beta.
[ Default Settings are as follows: ]
HKLM\Software\Microsoft\Bluetooth\A2DP\Settings\
BitPool DWORD 30
MaxSupportedBitPool DWORD 30
SampleRate
UseJointStereo DWORD 1
HKLM\Software\Microsoft\Bluetooth\AudioGateway\
Capability DWORD 37
[ Aternate Settings: ]
HKLM\Software\Microsoft\Bluetooth\A2DP\Settings\
BitPool DWORD 51
MaxSupportedBitPool DWORD 60
SampleRate DWORD 48000
UseJointStereo DWORD 0
Cant remember if i changed the one below or it was already at that value.
HKLM\Software\Microsoft\Bluetooth\AudioGateway\
Capability DWORD 60
-----------------
[ Sleuth255's WM6 optimum settings for bluetooth A2DP: ]
These are applicable to the newer releases of WM6.
Finding #1:
ADD/CHANGE the following values from the registry at HKLM\Software\Microsoft\Bluetooth\A2DP\Settings :
Name: UseJointStereo
Value (DWORD): 1
What this does is enable Joint-Stereo for the SBC codec, which is important and makes the biggest significant change to improve sound quality. (Note: In earlier versions of WM5 and WM6, Joint-Stereo was broken and resulted in a mono-output. This is not the case anymore with the newer WM6 ROMS.)
Further note: Sleuth255 found that some of his A2DP headsets could not work with JS turned on. In that case, you have to set the value to 0 to disable JS (resulting in poorer quality sound with more "hissing").
Finding #2:
REMOVE the following values from the registry at HKLM\Software\Microsoft\Bluetooth\A2DP\Settings if they are present:
- BitPool
- MaxSupportedBitPool
These values are used to manually set limits for the BT stack for the A2DP SBC codec. Previously, it was thought that these values should be set between 38 to 86. But if the values are removed, I think that the BT stack automatically chooses the best BitPool values for maximum quality. I've tried removing these values and the sound quality either improved or at least stayed the same.
[ SUMMARY ]
At this point, you should have only one value in the registry at HKLM\Software\Microsoft\Bluetooth\A2DP\Settings:
UseJointStereo = 1
Your A2DP audio should be very good at this point - almost indistinguishable from a wired headset. However, if you are still unsatisfied with the sound (you may notice some very slight "hissing" or "swishing" sounds on high frequencies of certain songs), you may want to try the optional setting below.
[ OPTIONAL ]
Finding #3:
This is optional, and a matter of preference.
ADD the following value to the registry at HKLM\Software\Microsoft\Bluetooth\A2DP\Settings:
Name: SampleRate
Value (DWORD): 48000 (decimal)
This forces the A2DP stack to send the audio to the headset at 48000Hz instead of the default 44100Hz. For some reason, I find that the 48Khz value makes the "hissing" sounds less obvious. Your findings may vary, as some people may prefer the slightly more forward sound of the original setting. But if you are game, give this a try - one thing for sure is that it definitely changes the sound quality.
To reverse the change, just remove the SampleRate value.
If you make this 3rd optional change, you should have the following values in the registry at HKLM\Software\Microsoft\Bluetooth\A2DP\Settings:
UseJointStereo = 1
SampleRate = 48000
[ Note - Quick tip on registry editing ]
Of course, every registry change needs a soft-reset to take effect. And please take the usual proper care when editing the registry or risk damaging your device.
Find that your settings dont "stick" after a reset?
Make sure you reset the phone like this: After making changes to the registry, exit your registry editor. Then push the power button of your phone (putting it into standby, with the screen off). Wait for about 10 seconds (the phone will be saving the data to disk during this time), and only after that push the reset button.
Click to expand...
Click to collapse
I like to quote my sources, but I don't have the links at this moment. I will update them later.
Varied...
My experience across four or five builds has always been mixed. My older Motorolas work fine but my newer S9s dropout periodically. Interestingly, not all builds have the same result when I use them for handsfree. Some builds give me the voice I am speaking to in mono and some in stereo. Currently I am using Nitro's build from a month ago.
I have already exchanged the S9s once, so it wasn't specific to that one headset.
Exitao - Do you have dropouts periodically? What headset do you have?
kkrull said:
My experience across four or five builds has always been mixed. My older Motorolas work fine but my newer S9s dropout periodically. Interestingly, not all builds have the same result when I use them for handsfree. Some builds give me the voice I am speaking to in mono and some in stereo. Currently I am using Nitro's build from a month ago.
I have already exchanged the S9s once, so it wasn't specific to that one headset.
Exitao - Do you have dropouts periodically? What headset do you have?
Click to expand...
Click to collapse
Sorry, I was intending to post my personal details soon.
I am using a Sonorix C3
Standards Bluetooth Specification V2.0
RF Frequency Range 2402 ~ 2480 MHz
Profiles Supported A2DP, AVRCP, Headset, Handsfree V1.5
Transmission Power 0.25 ~ 2.5mW (Bluetooth Power Class 2)
Receiver Sensitivity < -80dBm (PER 1 %)
Distance 10m (in open space)
Click to expand...
Click to collapse
I am using EA's Chinese "WM6 5.2.318.18120" ROM:
http://bbs.koxo.cn/thread-14687-1-1.html
Currently my headset (well, the remote dongle, really) supports stereo playback, call display and bt handsfree usage.
Reception seems very clear. Mic pickup is sensitive and noise cancellation seems to be just as sensitive (I was holding the mic in my hand and gesturing madly one day, and realised what I was doing).
My only complain is the volume. I need to muck about in the audiogain settings to increase it.
As for what bt stack I'm using, I have no clue.
If I dump the zip file from this link, http://forum.xda-developers.com/showthread.php?t=263735&highlight=a2dp the bta2dp.dll was last modified on april, 2006. When I look in the windows directory of my phone, it only tells me I flashed it. I guess I have to dump the ROM to find out.
There is also the problem that the WiMP in my ROM can't handle VBR files. I'll be updating to vjgrace's 3.5 ROM shortly.
edit:
No dropouts. Mostly it is a fight to manage system resources on the phone.
any ppl know how yo make when the phone ringtone can ring in bluetooth.
mean we can listen the ring tone from bluetooth.
I have been scouring the discussion board looking for tweaks to the A2DP settings. I have a custom rom but don't think anything was done to enhance the bluetooth settings. I think the sound can be much better but can't find current tweaks with the new stack. So i ask you all, if you have made tweaks to your Bluetooth Audio and are pleased with the sound, what tweaks have you made?
Thanks in Advance!
I am using motorla S9's and the top end sound is washy,tinny.
if you use advance comfig it has bluetooth settings you can adjust
are the s9s comfortable for you? i have the s9 hds and they kill my ears
They are not bad. I can get them to be just right.
I know about the configuration tool, but I am not sure where to go with certain settings? i.e. Bitpool, joint stereo etc. Right now i have bitpool at Medium and it's still kinda crappy - on the high end.
lbhocky19 said:
if you use advance comfig it has bluetooth settings you can adjust
are the s9s comfortable for you? i have the s9 hds and they kill my ears
Click to expand...
Click to collapse
With S9 there is a very fine line between barely noticing they are on and utter discomfort, and it all depends on how you wear them.
Unfortunately there isn't a way to describe it, but there is a sweet spot, a position where it seems to be perfect.
Smaniac said:
With S9 there is a very fine line between barely noticing they are on and utter discomfort, and it all depends on how you wear them.
Unfortunately there isn't a way to describe it, but there is a sweet spot, a position where it seems to be perfect.
Click to expand...
Click to collapse
i may have found the way you describe but when you have them in do they just rest in your ear or do you actually have them like in the canal like most noice isolating ones?
ive used the new zune ones and some shure ones that you really push in your ear but these i can only seem to get just barely in and you dont get the great bass unless you kinda push them which isnt practical
Bluetooth Settings
I use the following bluetooth settings-changed thru the advance config 3.3 tool
bitpool very high
Max bitpool 80
Min bitpool 30
sampling 48000
This sounds really good thru by jabra 620s
thanks for the data - I will go with those settings.
in2vnyl said:
I use the following bluetooth settings-changed thru the advance config 3.3 tool
bitpool very high
Max bitpool 80
Min bitpool 30
sampling 48000
This sounds really good thru by jabra 620s
Click to expand...
Click to collapse
what do you use to listen to your music? I try using the HTC player with setting way low than yours and I get tremendous skipping and songs that are "busy", for talk radio they're fine but almost every song skips. my settings are
bitpool=25
max=60
min=15
sampling=44000
no stereo
I had these problems with my apache but I figured that the Touch Pro would be quick enough for this. Could someone please point me in the right direction to not skip. thanks in advance.
with the settings very high does your phone slow down?
it always makes tf3d real laggy and such whenever i play music over stereo with high bluetooth quality
in2vnyl said:
I use the following bluetooth settings-changed thru the advance config 3.3 tool
bitpool very high
Max bitpool 80
Min bitpool 30
sampling 48000
This sounds really good thru by jabra 620s
Click to expand...
Click to collapse
I am going to try out these settings. I just tried switching bitpool to high and no other tweaks and the sound was still pretty bad, I would almost venture to say worse than FM radio. I never had any problems with A2DP quality on my Tilt and I never touched a setting so I'm pretty disappointed. Hopefully this will fix it.
S9 Working good on Fuze
I have mine on low and no skips, not sure if very low sounded better. Maybe it will work for you
To summarize:
What is the configuration that you ultilizam in bluetooth?
The greater BITPOOL higher "quality" and lower performance of Bluetooth (signal power) right?
My device is HTC Diamond and Motorola S9 (A2DP)
What configuration i use?
one question:
Joint stereo - Yes?
PC400 said:
one question:
Joint stereo - Yes?
Click to expand...
Click to collapse
Just try this simple settings, sounds great, no skipping at all.
Joint Stereo -> NO
reason is becos it would not be true/real stereo if we choose YES... right?
I use the following registry setting.
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings
Bitpool - 76
MaxSupportedBitPool - 80
SampleRate - 48000
UseJointStereo - 0
This is what I have ended up with through trial and error, give this a go. However I think assuming joint stereo doesn't give you real stereo is simplistic and incorrect. I have had a bit of a read and it is quite complicated.
I wouldn't worry about it too much, just try both and see what you think sounds better.
All A2DP confused people must read this:
http://forum.xda-developers.com/showthread.php?t=310438
I'm getting a bit frustrated with the bluetooth on my touch pro.
My current settings are
bitpool very high
Max bitpool 80
Min bitpool 30
sampling 48000
No skipping all is fine until I go walkabout and put the phone in my pocket.
Skip skip skipitty skip.
Tried other settings but still no joy.
Help........