Database Info

MDA2 Carkit is silent after upgrading ROM

Hi,
I've got a problem with my carkit (O2 XDA-Carkit) after I upgrade to the new ROM-Version of T-Mobile (1.60).
With the old Rom-Version, the carkit works as a loadspeaker for all kind of sound. The voice-instructions from tomtom for example, came out of the carkit-speaker loud and clearly. Each kind of sound, the device made, came out of the speaker of the carkit.
Now, after upgrading to the new ROM, only the telephone works with the speaker of the carkit. With Incoming or outgoing calls I can use the carkit as usual...the speaker works and the mikro works also. But every other sound (e.g. tomtom voice-instructions) came direktly out of the speaker of the mda2 in a poor quality.
Some hints, how I could use my carkit again as a speaker for all kind of sound without goinig back to the old ROM ?
Any other kind of hints...maybe to use a bluetooth headset therefor (so that all kind of sound came out of the headset....not only telephone...I've got a Plantronics Headset...but also only the telephone works)
thx for help
best regards
rob.

Yep.......I have the same problem here.......don't know why they changed settings on the handsfree profile here.
Another thing you will find out is that the charging is very slow on the XDA carkit with the XDA II. If you run TomTom, Yeti and a bright screen the xda II will not charge, but drain!!
It has something to do with the wiring of the interface, but unless someone will come up with a solution I will go for a new carkit or a BT solution. (It's a bloody shame though it doesn't work properly with the XDA carkit! :evil: )

Hi,
the charging-problem is also a mess.
I think, the problem is only the GPS-driver from tomtom. In my tests, only when the GPS-driver is loaded, the battery-power goes down. With stopping the GPS-driver, the battery will charge again, but only, if the battery-power is more than about 75 - 80%.
If the battery is less than 75%, it will not charge at all, even if, there is no App runnung and the screen is off.
You said, you will go for a new carkit or bluetooth-solution. Do you know a carkit or bluetooth-solution, wich offers the feature, that all sounds (tomtom instuctions...etc.) came out of a loadspeaker or thru a headset (without connecting the wired headphone ;-)
As far as I know, at the moment all devices works only with the telephone-funktion....
best regards
rob.

Same here,
i have build my own carkit, and have put ground to pin 19,
sound was normally going though the connector to my car stereo
now it doenst anymore :evil:
I am sure this isnt a hardware thing it is software
could be the settings on the handsfree profile. on the xda2...
this is very very frustrating. just being finished with my carkit and now i cant use it anymore
also you cant set the phone to speakermode anymore..

I am sure this isnt a hardware thing it is software
could be the settings on the handsfree profile. on the xda2...
Click to expand...
Click to collapse
Does anybody know how to change this back?

I found that the registry points to a certain file in your windows directory: HandsFree_Dll.dll
(I found this here: HKLM\Services\Handsfree)
Can someone with the old 1.03 ROM please upload this file so i can try if this solves the problem...
TIA,
Max

Akira, Max :
I am building my own car kit, and have no success.
I do not obtain audio out with or without grounding pin 19.
I'm running Rom 1.60.00WWE.
Did you solve your problem ??

I must correct my last update.
I obtain audio when in phone mode, but not during playing waves or TomTom directions. Even Ring Tones do not go out trough the bottom connector.
So is it a software problem ?
Can it be corrected ?

Jabra BT-800 not working w Qtek 2020 WM2003SE

I bought the Jabra BT-800 headset for 119 EUR and was hoping to enjoy the headset w/o getting my PPC out of my pocketst.
Well that didnt work out. Pairing was easy, and after switching on the headset (in profile on today screen) I could call with it. The only thing is, I cannot get the call list on the headset to work. It doesnt show any numbers at all, and i wonder how its supposed to work anyway.
That being said, I also don't get to see who's calling me when using the headset.
1) Incoming call.... PPC rings..
2) After a few seconds the headset backlight switches on showing "Jabra BT-800" (standard text). I do not get to see who's calling me on my headset.
3) When listening to the ring tone on headset, after a second or two I get a really annoying sqreaking sound and that stays on till I accept the call or hang up.
So it is not working for me. Besides the headset does not stay on my ear correctly. I have small ears and it is really uncomfortable.
I have Qtek 2020 with Windows Mobile 2003 SE ROM (downloaded from this forum), ROM version 2.06.00WWE, Radio 1.18.00, Protocol 1337.38, ExtROM 2.06.100a
The Jabra BT-800 does not do what they say it's supposed to do.
Anyone else got these problems or solutions? Ciao
R.

me too
Same problem... They say it is also capable of BT voice dialing. I hate the way it takes so long to answer calls.
I am going to find out if the sony ericson ones work.. Then get that. The reception on the BT800 is great though.

Re: me too
dewild1 said:
Same problem... They say it is also capable of BT voice dialing. I hate the way it takes so long to answer calls.
I am going to find out if the sony ericson ones work.. Then get that. The reception on the BT800 is great though.
Click to expand...
Click to collapse
Lucky you to get that far :evil:
After the upgrade to the Diamond 1.2 I have tried to bond my Bluespoon Digital. That was very easy and everything works fine, exept a call not is trasferred to the headset. I have tried both stacks, and I have tried it with the Sony Ericsson HBH 65. It simply doesn't work at all.
Does anybody have suggestions to what to do??

bluetooth headset not bonding
:lol:
Hi , I had smae problem with new I.Tech clip headset.
It's ok now as I downloaded the POcket Bluetotth Tools from this link:
http://bluetooth.i-networx.de/index_e.html
Now it's ok for incoming and outgoing calls...
Cheers..
Fingers

Persnickety Bluetooth
Thanks for the link!
I had a problem with my Jabra BT250 after the WM upgrade. The mic and speaker remained active on the device, and the earpeice on my headset was active, but not the headset mic. The BT Tools did the trick.
Thanks

Jabra BT800 & XDA ii
Hi there,
The Jabra BT800 isnt compatable with the XDA ii (check www.jabra.com)
I owned this headset and had exactly the same problems, i now own the Jabra BT200 and it works perfectly

The BT800 needs a phone with bluetooth handsfree profile to be able to use the advanced features like caller id. Xda II as standard has only bluetooth headset profile.
I'm not sure about the 2003SE rom some of you guys are using, but I've tried it with the Buzz WM2K5 rom (thanks buzz et al) and this DOES give it the bluetooth handsfree profile it needs.
BUT...
It seems Jabra's idea of caller id is to only pass the number across, and not the name. So for those of us that don't have a photographic memory its pretty useless. This isn't restricted to Xda's either. I tried a couple of Nokia phones that are 'compatible' according to www.jabra.com and these do exactly the same. Number shows on the jabra screen but no name, even though the phone is showing both.
I emailed Jabra about it and they acknowledge it is an issue. They also tell me there is an issue with numbers in international format in that they fail to pass the + sign across, so you can't ring out from the call list.
JD

Ya need 2.20 translated to have a working Hands Free profile.. BT800 needs hands free profile.
Caller ID still only displays if the number is a virgin to your system.. I think HBH662 will work with 2.20.
2005 may work with no problems too.

WM6 and A2DP

Hi all Gurus!
I was planning to get myself a Jabra BT8010 and plan to get it working with WM6 installed XDA MiniS.
Generally, how is the sound quality of BT A2DP as compared to normal headphones? Are there many issues in BT Stack of WM6 that might prevent nice music experience?
Also, has anyone tried BT8010 with WM6 Orwell's rom? and got it working perfectly fine?
And can we just jot all the issues/problems/solutions faced with WM6 (whether Orwells or PDAViet) and A2DP here in this thread?
Mods, the specific threads are all scattered so I thought I would start off this thread specifically for WM6 and A2DP. Please delete this thread if this topic doesnt require a separate thread.
thanks,
Sid

Works fine on mine with a Sony Ericsson DS910, and an iTech Blueband.
It has AVRCP also, so with the DS910 it supports all the controls.
Quality is probably about the same as A2DP from my K800i, but it is all quite memory intensive, so if you're low on ram it will stutter like a bastard.

i had the PDAviet 3 WM6 and the xound quality on mine was okay..its just a cheap think i bought on ebay that you plug your own headphones into. its eem sto lose some base and sound a bit tinny compaired to the same headphones plugged into my 8125 directly, but that could just be my BT receiver.

I have Nokia HS-12W and the music quality if good with same gaps in music but the quality in voice is very bad!
The voice is like talking from far!!!!
If someone solve this problem please tell us!

Im Using my Mono SE headset to listen to movies etc on the go and have noticed a bit of a drop in quality from WM5 to WM6, It seems to crackle more on WM6.
Bluetooth range is very good though, I was on a call the other day and someone came to the gate so I got up and went outside still talking on the headset only to realise my Wizard was still on my desk 10 meters away
Jules

totalcmdext said:
I have Nokia HS-12W and the music quality if good with same gaps in music but the quality in voice is very bad!
The voice is like talking from far!!!!
If someone solve this problem please tell us!
Click to expand...
Click to collapse
I use iphono mini with WM6, quality in music is quite good (similar as WM5) once you add the bitpool registry key to 40 (before a lot of skips).
But used as hands-free has quite bad quality, at least in my case most of the times I have to disconnect the bluetooth and use the phone.
Perhaps the Jabra are better in this aspect.

rodalfa said:
I use iphono mini with WM6, quality in music is quite good (similar as WM5) once you add the bitpool registry key to 40 (before a lot of skips).
Click to expand...
Click to collapse
Can you share the exact location of this key in the registry?
Although my Jabra hasnt arrived yet. I just want to be ready.
--Sid

Got My Jabra BT8010!
Hi All,
I got my Jabra BT8010 working with the WM6. I am pleasantly surprised with the voice quality. Music thru the stereo headset is also excellent, but sometimes the songs seem to slow down or plays fast randomly.
I tried overclocking, but it did not do much good.
Has anyone faced this? this doesnt happen everytime.Just randomly, the speed of song increases or decreases. Any pointers in this?
Further, Anyone knows how do I activate cyberon voice dialling thru this? The MS Voice commander doesnt work well with Indian names :-(
Thanks for the help...all. I also filled the petition for XDADEV to allow storing the ROMs at this site!

sids911 said:
Hi All,
I got my Jabra BT8010 working with the WM6. I am pleasantly surprised with the voice quality. Music thru the stereo headset is also excellent, but sometimes the songs seem to slow down or plays fast randomly.
I tried overclocking, but it did not do much good.
Has anyone faced this? this doesnt happen everytime.Just randomly, the speed of song increases or decreases. Any pointers in this?
Further, Anyone knows how do I activate cyberon voice dialling thru this? The MS Voice commander doesnt work well with Indian names :-(
Thanks for the help...all. I also filled the petition for XDADEV to allow storing the ROMs at this site!
Click to expand...
Click to collapse
Give this cab a shot. My buddy uses it on his Mini S, says it works wonders. I don't have a a2dp headset yet. I forget what brand he has, it's a something-com I think, the one that folds up.

My BT620s is on the way, I can't wait. I will let you know how it works out.

computer9cowboy said:
My BT620s is on the way, I can't wait. I will let you know how it works out.
Click to expand...
Click to collapse
I got it today.
The damn thing took forever to charge the first time.
I have to say I am very impressed with this thing. Works out of the box with WM6, so far no issues whatsoever. The sound quility is not audiophile level, however it is a lot clearer than I thought it would be!
I was listening to some songs that i have only heard on my crappy laptop speakers and they are awsome. I can hear a lot of things that I couldn't hear before. The bass on these is great.
the best part is that they were only like $60 US, that is less than I paid for my Jabra BT800 a year ago.
I Give the BT620s a 2 thumbs up!!!!!
btw no A2DP fixes have been applied to the Mini S, I am using PDAViet 3 so I am not sure, actually there may be some tweaks in that.

Using A2DP on pdaviet3 with the itech clip IIs headset works great for me:
PROs:
- no skipping after 20 min of mp3 playback
(EDIT: it does drop audio for one sec about 1-2 secs after initial playback, but then resumes)
- not wired headphone sound but pretty darn close
- seamless music pause/resume with incoming calls
- no problems at all with MS Voice Command
CON:
only one so far - people on other end when asked about sound of MY voice said it was a little distant/tunnel sounding (but this is more due to the mic location on the itech)
That being said, I've just "reverted" back to faria's 3.3 rom. Today screen with SPB Pocket Plus/Diary combo seems snappier.

i have wm6 and sonorix OBH-0110, and sound quality if awfull comparing to PC connection with toshiba bluetooth stack. and some cooker said that wm6 bt stack is alot worser then wm5 one.

Hi All,
I dont have this location on my WM6 Orwells: "HKLM/SOFTWARE/Microsoft/Bluetooth/AD2P/Settings/"
The "Settings" folder and the subkeys are not there. This location was there in WM5 while it isnt there in the WM6. Does anyone know where it has been relocated?
And any settings for A2DP skipping and Music playback speed uneven-ness?

Added those bitpool registry keys but they seem to have no effect. How can I improve A2DP sound quality in WM6?

AgentSmith said:
Added those bitpool registry keys but they seem to have no effect. How can I improve A2DP sound quality in WM6?
Click to expand...
Click to collapse
Did you create those locations manually?
Even after installing that bluetooth fix cab in this thread, I still have problems with skipping and song playback speed intermittant. :-(
Gurus!!! where art thou????

sids911 said:
Did you create those locations manually?
Even after installing that bluetooth fix cab in this thread, I still have problems with skipping and song playback speed intermittant. :-(
Gurus!!! where art thou????
Click to expand...
Click to collapse
Yes I created those manually. Now I use Molski's AKU3.3 Crossbow style rom and sound quality improved alot. Still not on the same level as a wired headset but much better nonetheless. As soon as there is a better WM6 rom with working A2DP tweaks I will upgrade again.

An Update,
I used this A2DP fix http://forum.xda-developers.com/showthread.php?t=284974
and skipping went away. Also, music quality reduced.
I uninstalled the fix, and I have the quality back, but songs have started skipping again.
Cant MS provide for a better BT stack in WM6 with all their development prowess??
Would going back to some stable ROM like Molski's or Farias WM5 help?

Faria's WM6 and A2DP
Another update....sighhh
I updated my Wizard to Faria's latest fully loaded WM6. The skipping reduced a bit, but thats about it. The Music speed is still intermittant.
Seems like I wouldnt be able to enjoy this gift. Why cant things just RUN....
I am guessing, changing ROMs wouldnt help...or would it? Does Widcomm stack work on WM6? Anyone with this experience?
The next ROMs I am gonna try are:
1. WM6 MBE
2. Farias 3.3 AKU
3. Molski's WM5
After that i will try selling my Jabra BT8010.

sids911 said:
I updated my Wizard to Faria's latest fully loaded WM6. The skipping reduced a bit, but thats about it. The Music speed is still intermittant.
Click to expand...
Click to collapse
Anyone figure out a cause behind the intermittent skipping and speed fluctuations when playing music over bluetooth? I'm using the XDA Mobile 6 release 2a ROM with my BlueAnt X5i headphones. Everything works for the most part. But about 10 to 15 minutes it will drop audio for a few seconds, then start back up again. Annoying but I can live with it.
What's really irritating is the fluctuations in playback speed. For some reason playback tends to speed up every 5 minutes or so. When I skip ahead or go to the next song and it's fine. Then the issue recurs again in 5 minutes... repeat cycle.
I've tried using different mp3's of different bit rates and that doesn't seem to have an impact. I've also tried different players - WMP, TCPMP, GSplayer, Mortplayer, etc. All seem to behave the same way when it comes to variations in speed during playback. Any ideas on this one????

WM6 A2DP settings

Hi,
I am using O2 xda mini s, and i just bought a sony ericson HBH-DS970 stereo bluetooth earphones.
I am using WM6 Xplorer Rom and radio version 02.25.11.
Currently I am a bit frustrated with my bluetooth earphone as the quality is very poor eventhough I read that the quality of the sound if used with other bluetooth handphone / pocket PC is superb.
I have ben searching this forum to either tweaks the registry or any patch to improve the sound but currently I'm still lost. I found one old post (WM5) which guide us to tweaks -> HKLM/software/microsoft/bluetooth/a2dp/settings....
but my problem is that there is no settings folder under my a2dp, there are 4 folder with label 1,2,3,4.
Are there any way i can improve the sound quality???
will changing the radio rom affect the quality of bluetooth reception??
Please enlighten me..
Thanks

http://forum.xda-developers.com/showthread.php?t=297762&page=100
Try the settings from cduncan...
If there is no registry entry, you will have to manually put them.
You can change the bitpool setting for quality of music.
HTH

Cheers Sids,
I have already do as you said... previously went to that post but feel lost, and since the thread have over 100 pages, therefore i feel inappropriate to ask you or duncan.
One more thing though, can i ask you what is your personal preference on those settings?? I cant put a lot of bass, because it will sound terrible, like broken speaker.. what todo??
cheers mate
p/s My problem is that the quality of the sound that coming out of my BT earphone is just poor (although others are highly recommending this DS970). I have no problem with pairing it with my wizard or the playback.
I have play around with the BitPool and the only difference that I notice was the volume level, not the sound quality. any advice??
One more thing, is the selection of Radio Rom have any effect to the quality of the bluetooth signal i.e. to the output in my BT earphone??? Help...
Thanks again

Hi,
I cant say about your BT headsets. But I confirmed these things - Updated firmware from the manufacturer (Jabra for me) and the quality with other A2DP enabled (maybe nokia/SE) phone.
I have set my bitpool setting to 60 which is Farias default, but he placed the reg entry in AD2P folder instead of A2DP by mistake.
I am using equalizer settings with TCPMP for the nice sound, which I dont get with Windows Media Player. Maybe you could try that out.
Even after those settings and tweakings, I dont think BT headsets can replace wired headsets for an audiophile. You will only just get passable sound quality. Maybe its got to do with bandwidth that BT provides.
Lastly, I may be wrong, but Radio roms are only used for GSM radio. Its got nothing to do with BT.
Gurus, please correct me if I am wrong anywhere.
Sid

I'm using faria ROM Real Thing and using Oakley OROKR as my bluetooth stereo. But I have unusual problem. When I listen MP3 from pocket music 4.3.4 my OROKR produced a lag sound. Sometimes the sound was disapeared and suddenly back to normal again (with lag of course). I have try my OROKR with my PALM Treo 650 using A2DP s/w it's produced same quality like my MDA. Is this happen cause the registry setting or my OROKR problem? Help me?
PS: If I used OROKR to call it's 100% normal

For what it's worth, i have tested my plantronics pulsar 590a (bt ver2) with other htc devices with bluetooth ver 2 and audio was excellent. the wizard only has bt ver 1.2 and that is maybe where sound quality is lost. just a thought...

did you buy the headphones on ebay? Got mine on ebay and I was very disappointed with the sound quality. i checked online and, for my surprised, i discovered that what I got from ebay was a cheap fake. I bought a new set from sony shop and voila, they work perfect. Sound is amazing..with the SE k800i i am using from time to time. Couldnt get them to worjk with my xda2i tho

Stereo bluetooth (A2DP) issue on Polaris

I just bought a bluetooth headset from Sony : DR-BT21G.
The pairing works just fine, I can listen to music or make a phone call. I can even watch a divx on TCMP with the sound in the head set and no problem.
The only thing is that as soon as I put the Polaris in my pocket (jacket our trousers) the sound stops, then comes back, then stops again, etc. The pairing is not broken, but the sound keeps coming and stopping.
This is even worse when I'm walking.
If I take the phone on my hand, the sound does not stop anymore.
I have changed the following registry keys as I read on other posts but it changed nothing:
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/BitPool - change to 48
HKLM/Software/Microsoft/Bluetooth/A2DP/Settings/MaxSupportedBitPool - change to 58
Any idea were this could come from ? Any other good or bad experience with this combination ? Is it just bad luck and I have to change my headset ?
Thanks for your help.
_________
WM 6.1 (bepe 0.66)
CE OS 5.2.19202 (Build 19202.1.0.0)
ROM Version : 1.52.751.2WWE
RadioVersion : 1.70.OliNex
Protocol Version : 25.65.30.04H

Quick update
I have installed the two patches for bluetooth, released by HTC official web site.
But this did not fix anything...

Yo dude,
I've got the same problem with a Sony Ericsson HBH-DS980.
I've not tryed to install the patches because i just received my cruise from repairing service.
I'll try and tell u.
Bye

i too have this annoying problem with no joy from the hotfix.... ring htc tell them you want it fixing under waranty i am!

1. Did you either restart your phone or restart the blueooth after making the registry changes?
2. If you did and it still didn't work for you, I would reduce both bitrate settings to the 28 and then restart either the blueooth or the phone which should fix your issue pretty much immediately. I would then up the A2PD settings at increments of 4 until you figure out the Sony DR-BT21G bitrate threshold. (Again be sure to restart either the phone or the bluetooth after each increase.)
FYI: The hotfixes aren't supposed to fix A2DP issues.

Thank you very much Sonus for your help.
Unfortunately I tried to tweak the bitrate according to your advice but it does not change anything.
I put the bitrate down to 2. It is true that I have less cut, but still, the connection drops from time to time for somes seconds.
Is the idea of this bitrate to catch the one of the device or is it : the lower, the better connection ?
I did not noticed any effect on the quality of the sound though.
Notice that I restarted the Polaris each time I change the value.
If you have any other idea or comment this will be more than welcome.

Here's the solutions guys.
http://forum.xda-developers.com/showpost.php?p=1296052&postcount=1
After implementing everything in there, I soft resetted the device, reverted the AKU back to .0.4.5(HKLM\System\Versions\AKU) then installed the HTC BT Fix and voila! No more issues. Excellent! Calls notifications are now coming direct to the headset.
By the way, i'm also using Sony Ericsson HBH-DS980

reyjabs said:
Here's the solutions guys.
http://forum.xda-developers.com/showpost.php?p=1296052&postcount=1
After implementing everything in there, I soft resetted the device, reverted the AKU back to .0.4.5(HKLM\System\Versions\AKU) then installed the HTC BT Fix and voila! No more issues. Excellent! Calls notifications are now coming direct to the headset.
By the way, i'm also using Sony Ericsson HBH-DS980
Click to expand...
Click to collapse
Yep i reverted aku to .0.4.5, installed the HTC BT fixes, and now i have no more "holes" in sounds.
But what is this solution ? i don't really understant what is it for?
I have the same headset as you, did u see any difference in the quality with the solution you mensioned?
Thx for ur future answer
David

More tweaking... unsuccessful
I have done all what was written in the thread :
- deleted the two regkey (MaxSupportedBitPool and BitPool)
- set the AKU value back to .0.4.5 (the initial value was .1.0.0)
- reset the TC (many times )
But still, I suffer from cuts in the connection where the sounds just stops in the headset.
I just want to precise that I never suffered from low quality of the music. All the time I can experience very high quality sounds. Only the headset stops playing for half a second, two seconds, then play again, then stops...
Any help more than welcome....

i have same problem but with my non-stereo, non-A2DP headset. when i put the phone in my pocket, sound become "choppy".. anyone know a solution for me?