Database Info

Updrade ROM without USB

Hello everyone,
í have a little problem - my qtek s200 usb probably is out of order and i can't connect pocket with pc. so i consider go to service under the guarantee, in mind, that they will fix, but there is the problem - in my device are upgraded to wm6 and free servise is missing. I want to put in it older wm5 version of windows(i have my old wm5 backup file "nk.nbf").
so, does it possible to downgrade my device without usb?

yse you can
there was memory card dump in the ftp site, but you need to unlock CID first I think
I can't help you in this, slow internet connection, but if one can dump you the ROM, you can install it without USB

i'm waiting too the solution

paradis_pal said:
there was memory card dump in the ftp site
Click to expand...
Click to collapse
i can't find thet memory card dump(can jou give me the link?). i found just program for creating backup SD card, but there i need USB connection from device to PC..

the link, I said there was one, I can't find it.
first did you unlock CID, you can't backup the rom into sd image if you didn't unlock CID, and I think you can't restore one without CID unlocked.
you can't put the nk.nbf in the image and restore, it is not that easy
you need to put it in RAW format not fat using the tool psdwrite.exe from (itsutils.dll) but in your case you need to use cardreader to put the bin file, I can't help you and give you the file becasue of the slow and bad internet
just give your device to the service under the guarantee and tell them it hardware problem not software and you installed a theme

is there a way to see if its CID unlocked?

yes ... if you can make a sd-dump or flash all roms with different CIDs... its cid unlocked :->

one more question about dump sd image..
may someone knows how to create that bootable SD from original shipped rom? i'm searching for raw file everythere, but i found nothing..

hello one more time. i want to wake up this thread, becouse one more problem happend to me. so, my one prophet now is absolutly dead.
it's heppend becouse i was updating rom over bluetouch and it stoped with error. it's stocked in htc screen. i could enter bootloader, i could do hard reset, but it's not helping.
so i'm asking one more time, maybe someone have saved his his rom dump image and could share it?

I'm banned now
but I can help, I'll try to upload the bin file
did u unlocked cid?
ca u write it in raw format on the card?

Chopin said:
I'm banned now
but I can help, I'll try to upload the bin file
did u unlocked cid?
ca u write it in raw format on the card?
Click to expand...
Click to collapse
yes, my prophet cid is unlocked. i think i can write raw format on my card, i have 3 types of card readers, so one of them should be able to do that. of course, i need to know which program i should use to put RAW to SD.
thank you for help

STUCK AT BOOT LOADER...can anyone help please...
my i-mate jamin is stuck at boot screen of i-mate with "IPL 2.13.0001", SPL 2.G4.4PDA" and "GSM 02.20.21" on top left of the screen. i tried to update to wm6. i did hardspl and followed the steps. when i remove the battery and turn it on a red, green and blue horizontal lines appear with "IPL 2.13.0001" and "SPL 2.G4.4PDA"...help please.

Bricked my vox, please help

Hi there,
I have bricked my vox whilst flashing it using Jocky's USPL utility, the cable fell out and now all that the vox will do is boot up to the HTC splash screen and then hang.
I can get the phone to the bootloader screen but I can't flash a new ROM as it is previously a Vodafone branded v1415 so I get Invalid Vender ID no matter what ROM I use.
I guess I need the official VF UK one but I have searched the web for hours now and I am unable to source it.
Is it possible to get round the Invalid Vender ID in any way from the bootloader screen as I obviously can't boot it to be able to use the SDA unlocker.
Any information would be greatly appreciated.
Thanks
Bunter12345

I don't know where you can find vodafone rom for 1415 but you can try with this swiss rom for their XPA v1415 version of VOX.
Look here:
http://www.swisscom-mobile.ch/scm/d...dm=Detail&pa=0x0x0x0x0x0x0x166x0&odg=Software

matrix77 said:
I don't know where you can find vodafone rom for 1415 but you can try with this swiss rom for their XPA v1415 version of VOX.
Look here:
http://www.swisscom-mobile.ch/scm/d...dm=Detail&pa=0x0x0x0x0x0x0x166x0&odg=Software
Click to expand...
Click to collapse
Hi there,
Still get the same invalid vendor id with that rom as well unfortunately, thanks for your help though.

did u find any solution as i have the same problem

mrushabh said:
did u find any solution as i have the same problem
Click to expand...
Click to collapse
Guys have you tried removing the Operator ID from the nbh file before flashing it ?
You can use TyphoonNBFTools to do that.. If you remove the operator field completely you should be able to flash the rom you want with a locked SPL..
But there is just the problem that it is a NBH file and TyphoonNBFTools can only, as the name suggests, only open NBF file.. So you need to find some tool to convert a NBH file to NBF, remove the operator field, and convert back again, and flash..
Or what about flashing the new SPL while in Bootloader with a RUU? But be aware i do not know if that could brick your device forever..

Da9L said:
Guys have you tried removing the Operator ID from the nbh file before flashing it ?
You can use TyphoonNBFTools to do that.. If you remove the operator field completely you should be able to flash the rom you want with a locked SPL..
But there is just the problem that it is a NBH file and TyphoonNBFTools can only, as the name suggests, only open NBF file.. So you need to find some tool to convert a NBH file to NBF, remove the operator field, and convert back again, and flash..
Click to expand...
Click to collapse
This is complete bull****. In another thread I already once explained that this doesn't work.

iam confusing Please help me ??

Hi guys
i am confusing about my Sapphier because i buy my mobile yesterday from Vodafone in uk and the sales man told me this phone work just with vodafone sim card , and by mistake i insert T-MOBILE sim card and itis work
every thing itis work "internet - 3G...etc
So its my phone lock or unlock ? and if its unlock , can i flash the ROM ?
MOBILE NUMBER:1.5
FIRMWARE : 1.5
BASEBAND:62.50S.20.17U_2.22.19.261
KERNAL:2.6.27-00393-G6607056 [email protected] #1
BUILD NUMBER : CRB43

any one please?

Find out what SPL you have. You can do that in fastboot mode while powering down your phone. And then press Home+End/Power to get it there. Write down the first lines in the application.

boy4ngage said:
Hi guys
i am confusing about my Sapphier because i buy my mobile yesterday from Vodafone in uk and the sales man told me this phone work just with vodafone sim card , and by mistake i insert T-MOBILE sim card and itis work
every thing itis work "internet - 3G...etc
So its my phone lock or unlock ? and if its unlock , can i flash the ROM ?
MOBILE NUMBER:1.5
FIRMWARE : 1.5
BASEBAND:62.50S.20.17U_2.22.19.261
KERNAL:2.6.27-00393-G6607056 [email protected] #1
BUILD NUMBER : CRB43
Click to expand...
Click to collapse
it is unlock as i have the same phone. you need to root it first then flash whatever you want. its so easy after rooting......... flash direst from sd card by using home+power button when phone is off as no need for all that adb push stuff. you can actually place the Rav1.1.1G.img straight to sd card without all the messing........ if you look at commands that all you doing anyway.............but using sdk tools. i use an external card reader to copy all files over, pop back in phone and do ma thing

Cheesebaron said:
Find out what SPL you have. You can do that in fastboot mode while powering down your phone. And then press Home+End/Power to get it there. Write down the first lines in the application.
Click to expand...
Click to collapse
thanx
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0004 (SAPP10000)
RADIO 0-2.22.19.26I
APR 9 2009,23:30:40

shingers5 said:
it is unlock as i have the same phone. you need to root it first then flash whatever you want. its so easy after rooting......... flash direst from sd card by using home+power button when phone is off as no need for all that adb push stuff. you can actually place the Rav1.1.1G.img straight to sd card without all the messing........ if you look at commands that all you doing anyway.............but using sdk tools. i use an external card reader to copy all files over, pop back in phone and do ma thing
Click to expand...
Click to collapse
you are the best meat
can you send to me link for the step to rooting also if you have advice for me please tell me before i do the rooting

Look here: http://forum.xda-developers.com/showthread.php?t=517948 for Rooting.
Look here: http://forum.xda-developers.com/showthread.php?t=529019 for Flashing SPL to enable usage of third party roms.

boy4ngage said:
you are the best meat
can you send to me link for the step to rooting also if you have advice for me please tell me before i do the rooting
Click to expand...
Click to collapse
right this is the safest root method as it gives you recovery options
http://forum.xda-developers.com/showthread.php?t=530492
also check the wiki. do 1st 5 steps on wiki then follow link above. once thats done you ok

than x guys you help me allot

belgium magic stuck in ruu mode

Having had many flashes on my old windows mobile phones and hacking the iphone i thought an android would be simple
i have a belgium htc magic which had its spl changed to accept roms as in the guides , so i tryed to flash the vodafone ausie rom , every thing went well , the radio got updated , then it failed with the country id problem
now the phone is stuck in ruu mode , i cannot get into the recovery mode as i had done before , the main screen has at the bottom a picture of a rom/ram in a red circle with the stripe through the middle, when the phones in that mode i can hear my twitter app on the phone bleeping everytime i get a new tweet but it wont boot into the main interface , i have tryed through ms dos all the commands but it always fails , the phone needs a ruu file to install the phone back to life but after 2 days searching here and on google i have not found the belgium rom to restore it back to life , i dont know if there will be a update soon as its a 32a version , any ideas guys or how to build a ruu to get it back , i had saved my nandoid but that does not help at all , any help would be very gratefull as iam pulling out my hair with this phone
details of the phone are
sapphire pvt 32a ship s-on h
hboot 1.76.007 ( sapp10000)
cpld-12
radio 6.35.07.29
aug 4 2009 , 19.34:38
thanks in advance

On the forum have posted a lot of similar info!
- use brain
- use search button
And the answer is:
- use goldcard
Create goldcard from sdcard to avoid checking Customer ID. It is simply method, but i notice, that some sd cards and some devices are not compatible with this process
You must find following: a computer (notebook) with Ubuntu (or Linux-based OS) and built-in cardreader. But i you have friend with Android-phone process will be simpliest.
There is a problem getting CID from cardreader, that connected through USB-port to computer, because Ubuntu mounts sdcard from cardreader as physical storage, not as device.
http://forum.xda-developers.com/showthread.php?t=572683
There is instruction of creating Goldcard.
attention: Step 20 is for Hero only
At this step you must use any RUU ROM with version 3.03.XXX for Magics (HK Vodafone-Smartone, Singapore, Malaysia - does not matter). You cann't use old RUU ROMs, cause you flashed a new perfected SPL already. It doesn't allow downgrading.
p.s. there is an alternative method getting CID in Ubuntu
http://forum.xda-developers.com/showpost.php?p=5103029&postcount=352

thanks
thanks for your help i will look in to it , i did search the forum but there seems so many different ways people have managed to restore thier phones , have contacted htc as well for a real copy in ruu format as iam sure they must have it on their ftp and will if i get it upload it and post it here on the forum for any users with the same model from belgium to restore back thier original rom

no goldcard
apple macs suck , iam unable to make my sd card as it cannot be seen in dos commands , will have to wait until i can get hold of a real computer so i can try again

No need for a goldcard you can do it right way
http://forum.xda-developers.com/showthread.php?t=589722
read the post then take a look post 35 at http://forum.xda-developers.com/showpost.php?p=5033743&postcount=35
what you need is change the files so you have the hero spl and hero recovery and this new radio inside the file now you can ron ruu (as explaind in #35 ) you should end up with a eng S-OFF SPL and the new rom then it is posiable to recover back to an older ROM if you want , search newxt time for a topic not just for recover a dead phone!
remember new radio = new SPL first then maybe downgrade,
is it in RUU mode or just fastboot ?
any ways you should fix it using these links

cheers
will read and try out the links you gave thanks and its a ruu mode my phones stuck in

It cann't help to peekie.
Because his phone have perfected SPL 1.76.0007 already.
It doesn't allow to flash other SPL. We've tried with my friend, but RUU doesn't flash eng SPL if phone have perfected.
I flashed successfully, cause i have eng SPL 1.33.2010
p.s. Goldcard needed for RUU Update, cause Customer ID is different between HongKong and Romania =)

up and running
thanks to all your tips i managed to get my phone back to life using my wifes htc hero ( she was away for a few days ) made the magaic card and flashed the vodafone rom , htc were useless and said i had a vodafone version ( as i live in holland ) not realising it was a second hand one from belgium and yep its very fast and cool now , merry xmas to all

can anyone help me with this thread http://forum.xda-developers.com/showthread.php?p=5175739#post5175739

Solved [Q] HTC Desire Stuck on Fastboot s-on :(

Hi
Please help me my HTC Desire S stuck on fastboot and bootloader after change the hboot to 0.98.0000 s-on
i cant using adb to change the hboot ;(
i cant install my official rom ruu htc saga ara 1.36.415.1 ;( error 140 i dont know why my current rom 1.47.415.1 and i did that before
i cant install ruu htc saga europe 2.10.401.5 ;( error 131
i cant create goldcard cuz i dont know the sd card cid "i cant using adb on fastboot"
Plz tell me what can i do???

Well, I'm not sure there is a lot to do when you're S-ON. But I would give Android Flasher a try. It worked for me, even if adb couldn't recognize my phone.

Thanx my friend i will try it

Android flasher doesnt work with hboot S-ON.
U can make gold card on other android device. And then, u can run RUU Europe 1.28.
If you can't, you can take to Services or S-OFF by XTC-clip

I had the same problem, but do not dispair you can fix this.
Obviously one point you have missed on the whole goldcard thing is that you dont have to use ADB or your bricked phone to find out the CID, put it into a card reader and use your PC. So onto making yourself a goldcard.
The process of creating one is rather hit and miss, but I eventually got one to work. Make sure you use an MicroSD card that is 2GB or smaller as any larger than this and it's a SDHC card and wont work. I used a old 1GB Sandisk card my girlfriend had spare. Have a look on the forums for a goldcard.exe file to run on windows to simplify the process, I found this worked when the forum described method did not. Keep trying with this as it took me many attempts to get a working goldcard.
From your post it sounds like you want to install the cool new Android 2.3.5 with Sense 3.0. Your problem is your phone will not take the European RUU 2.10.401.5 as your phone is from another region - 1.47.415.1 (india?) and got screwed up in the process. The bold part of the software version number relates to region. Mine was from Thailand and the european update worked when installed with my goldcard.
When you have your goldcard created you need to extract the ROM.zip file from the RUU (just run the exe and look in your PCs temp directory whilst the exe is open, it unpacks itself there) and then rename this to PG88IMG.zip. Put this file onto your goldcard and then power on your Desire S whilst holding the Vol. down button.
If you still get errors like 130 or 140 your goldcard is not made correctly, so try again.
Once you have the new update working take yourself to htcdev.com and unlock the bootloader, then you can flash CWM recovery and root it as well.
Hope this helps

thanxxxxxxxxx all really i miss these solutions because i was very confuse
thanx again for all i will try it and give u my feedback

traysteel said:
Make sure you use an MicroSD card that is 2GB or smaller as any larger than this and it's a SDHC card and wont work.
Click to expand...
Click to collapse
One tiny correction on this part, I use a 16GB SanDisk Class 6 GoldCard. Means its an SDHC and I haven't had any problems with it.