My father gave me his ld O2 xda mini and i just switched it on after tap screen command . The screen is not alligned so can any one suggest me how to switch on my mobile. it stops near Allign screen comand
Do you mean you cannot align the screen even if you press on the + marks that appear in sequence? That could be a problem with your digitizer.
Related
i had my touch screen broken ,, inXDA 2020 ,and i bought a new one , similar and it works ,,but when i press on point it made another position ... and i can not make screen Alignment ..
Hi!
The screen of my Prophet works correctly.
After I've installed a contributed rom, my device boots correctly (after hard reset) and then ask me to align screen but just after I tap to enter in align procedure, it didn't give response anymore! So it enter (tapping the screen) in the align procedure, but then no repond any nore!
I tried to install other roms but... nothing to do: the is always exactly the same:-((
What can I do? Go back to WM5?
What's the correct procedure? I didn't found it...
I've tried to and...
Now I've installed NVID rom
but when appears "tap here to set up your Windows Mobile-based device" I tap on the screen (so touchscreen works) then pass to "align screen"
here if I touch normally it didn't work but if I press and move a little the pen on the cross (like designing very little circle) it works.
After alignment procedure, Prophet seems to works regularly, I mean I just nee to simply touch screen and it works.
Do you think it's the beginning of an hardware problem?
this happened to me as well. i can't touch the centre cross hair, but can with my finger, the other cross hair i can tap with the stylus. also on the keyboard, i can't tap esp the no. 8 & few letters below it esp G.
still happens to me even with another rom. don't know how to correct it. i guess a new screen is the key... or get a new pda - i'm waiting for my touch pro!!
all roms problem
Yep, it seem like it don't receive a spot area touch, but only wide area touch.
But this appens to me for «all» roms I tested and «only» for alignment procedure!
After I get screen aligned, it works perfectly, and seems to have normal sensitivity.
The problem is only for align procedure!
But it sounds strange that you can't use "8" or "g": it seems really a problem with touchscreen or maybe it is to clean a little.
But you are a lucky man! Touch pro is coming in your hands...
Bye
Hi
I've had my orbit 2 for a while now using the o2 software and I thought today I would try and install HTC home to see what all the fuss is about!
I downloaded the cab and installed it but now my orbit 2 crashes on start up!
When I turn it on I get the blue o2 welcome screen, the green windowms mobil 6.1 screen then it loads. The o2 smart bar is still there and the two screen buttons say calander and contacts (as its always been).
Those buttons then change to phone and menu I believe and the phone crashes!
How do do a factory reset the phone without being able to turn it on?
Update: It appears I can access the phone when its plugged into my pc, but as the phone crashes sometimes!
Help!!!!
press the two hardware phone keys together and then, while holding
them pressed, softreset with the pen. A message should appear on
the screen, that you will lose all personal data. Press green button
to confirm and phone will HARDRESET...
Good luck,
Olioaglio
Are you using the right cab file?
Hi,
I have an Orbit 2 and have no problems with my 6 tab HTC home file.
You do need to take care which version you are using though.
The cab file I have and which I know does work is:
HTC.Kaiser.Home.Eng.0409.6Tab.sch
Instead of hard resetting your orbit 2, just remove the cab file you're using and install the cab file I list above and which you should find by doing a search of this site. Then do a soft reset and it should be fine.
Hi everybody!! I'm new in the forum and in the androids world!
It have been passed less than three weeks since I've bought my new Nexus s.
It uses to work fine until this morning. A portion of the touchscreen stopped to react to the touch.
For example in the landscape mode I'm unable to use all the second line of the keybord, instead in the normal mode I can't press the 'e','d' and 'x' letters or the microphone button. I'm using the cyanogen mod and with the normal theme, when I'm on the homepage, I can't press the phone button (the virtual button on the left of the menu button).
When I use this vertical area, the phone sometimes react like if I perss another part of the screen or does not react at all.
I've read that there were some problem with the touchscreen of the nexus s with samoled screen, but I've the european versione with the slcd screen! What can I do? For you what is the problem?
Sorry for my english and thank you for the help!
lollo64 said:
Hi everybody!! I'm new in the forum and in the androids world!
It have been passed less than three weeks since I've bought my new Nexus s.
It uses to work fine until this morning. A portion of the touchscreen stopped to react to the touch.
For example in the landscape mode I'm unable to use all the second line of the keybord, instead in the normal mode I can't press the 'e','d' and 'x' letters or the microphone button. I'm using the cyanogen mod and with the normal theme, when I'm on the homepage, I can't press the phone button (the virtual button on the left of the menu button).
When I use this vertical area, the phone sometimes react like if I perss another part of the screen or does not react at all.
I've read that there were some problem with the touchscreen of the nexus s with samoled screen, but I've the european versione with the slcd screen! What can I do? For you what is the problem?
Sorry for my english and thank you for the help!
Click to expand...
Click to collapse
have you tried to see if a reboot fixes the issue?
if its within the first 3 weeks.. no matter the issue try to get a replacement
Hello,
Last week my Samsung Galaxy S Plus fell on the ground from about 1,5 m and the result was that on the screen some cracks appeared, and it didn't work. When I tried to switch the phone on I could hear the welcome ringtone, the sensor buttons worked, and even the shortcut for screenshot (home key + back sensor button) also worked, but the screen was blank.
So I bought a brand new screen and replaced the broken one, but the result was the same - the phone switches on, but the screen is blank.
Do you have any ideas where the problem could be?
Thsnks.