Database Info

Unable to get tethering or internet sharing working on VZW TP2

It's easier if I just post a link to the thread over at smartappsworld so I'm not stuck re-writing it all. http://smartappsworld.com/thread-t...-getting-error-692-hardware-failure-in-modem
I still have not been able to resolve these issues. Tethering worked without problems on my Q9M, but on the TP2 it gives me error 692 -There was a hardware failure in the modem - . Internet sharing isnt cooperating either. New hardware wizard in XP pops up for Generic RNDIS device. When I tried to feed it some drivers for Internet Sharing (pulled by another xda member in another thread here somewhere), XP gives me some bogus error about a missing entry in one of the .inf files that I pointed it towards. It doesnt specify which file, then it closes and there is a big yellow ( ! ) over Internet Sharing device in network devices (Driver not installed).
Thats a quick run through of the issues I'm dealing with. I really need this working as this is my only way to connect my PC to the internet. I live in boonie land where cable is nowhere in my neighborhood and dsl is too far to connect.
Yes I searched. I spent a great deal of time going through xda forums and Google... before I decided to post here. Thanks for anyones help in advance.
T.C.

I have not had a problem tethering my tp2 with verizon using Win XP Pro x64, or XP home x86.
The way that works for me is:
Run the internet sharing program, Not the VZW access manager crap.
Tell it to connect
After it connects, then plug in usb from pc to phone
The pc recognizes it as another network connection
It gets its IPs and all no problems.
Open up your choice of browser and off you go.
I have never had to install drivers to do any of this, and also it doesnt use active sync when doing it this way.
hope this helps.

I pulled the internet sharing program out of the Windows folder (made a shortcut ). The problem is when I connect to the PC. The install new hardware wizard comes up for Generic RNDIS device. This is after I clicked "Connect" in IS. I have clicked cancel , then it says install failed, your new hardware may not work properly. IS disconnects and Activesync starts syncing. I tried it the first way , letting AS sync once then turning IS on, same problem.
I dont use VZ Access Manager. I was forced to uninstall that and Activesync when suddenly the PC wouldnt recognize anything while the phone was plugged in. After that, the phones internet wouldn't work either so I then had to restore the phone to factory defaults via a hard reset. After resetting, I found that 228 wouldn't program the phone. The next day I nearly took it in to VZW. tried 228 again and it worked finally. Got my phone internet back and I'm back to trying to get IS working. I didn't install VZAM, but I do have the USB driver installed.
Are there certain files that are needed on XP for this? I am still running 32bit XP Pro if that makes any difference. Service packs maybe? I'm up to the point where I'm about to go out and buy a WiFi card and try connecting it that way. Something Has to work here.

The generic RNDIS ( Remote Network Driver Interface Specification ) drivers are part of the ActiveSync install and are needed for TCP/IP between the PC and the phone.
Install ActiveSync.
Plug in the phone.
Don't cancel the New Hardware Found - let it install the drivers.
Set up a sync relationship with the PC if you like - not needed.
When you tell ICS to connect, it should drop any other connection to the PC (Hard Drive, Active Sync) and make the Windows connect sound. Then you should see the network negotiation icon in the System Tray as it sets up the internet sharing.

When I dont cancel New Hardware wizard, it doesn't find any drivers to install. This is if I let it search for drivers automatically, and after Activesync is installed. See what the problem is here? What should normally work, doesn't. Are there key files missing in the copy of Activesync that is included on the CD from VZW? What am I missing here? When I turn Internet sharing on, on the phone, it always says something like ''Check USB cable connection'' and it never changes. The hardware wizard never finds the drivers, and when I try to point it towards driver files, it says theres an entry missing and wont install.
Grr..if you read through the other thread link above, you know how long i have been trying to get it to work. Frustrating!!

Wallking HotSpots
THE-COPS said:
It's easier if I just post a link to the thread over at smartappsworld so I'm not stuck re-writing it all. http://smartappsworld.com/thread-t...-getting-error-692-hardware-failure-in-modem
I still have not been able to resolve these issues. Tethering worked without problems on my Q9M, but on the TP2 it gives me error 692 -There was a hardware failure in the modem - . Internet sharing isnt cooperating either. New hardware wizard in XP pops up for Generic RNDIS device. When I tried to feed it some drivers for Internet Sharing (pulled by another xda member in another thread here somewhere), XP gives me some bogus error about a missing entry in one of the .inf files that I pointed it towards. It doesnt specify which file, then it closes and there is a big yellow ( ! ) over Internet Sharing device in network devices (Driver not installed).
Thats a quick run through of the issues I'm dealing with. I really need this working as this is my only way to connect my PC to the internet. I live in boonie land where cable is nowhere in my neighborhood and dsl is too far to connect.
Yes I searched. I spent a great deal of time going through xda forums and Google... before I decided to post here. Thanks for anyones help in advance.
T.C.
Click to expand...
Click to collapse
I myself use WalkingHotSpots http://www.walkinghotspot.com/. It is 24.99 for a lifetime license and currently they allow you to use the license over and over when you upgrade your phone. I used it first when I had the Touch Pro and now I am using it with my TP2. It is a program that allows me to add up to 5 connections and use my TP2 as a Hotspot. Now of course it would requre you to have your TP2 connected and charging via wall outlet. But basically it will allow me to connect 3G using my WiFi. I just used it Tuesday night while at church to connect back to my business server and resolve some databases issues. My laptop was running at an excellent speed and I was online over 2 hours with no drop connections. The walking hotspot website says that it will not work with Verizon but I can personally say that it does. I do not have the Internet connection software installed on my TP2 so I am going all WiFi for my connection. I added a password and name for my Walking HotSpot so no random joe could just drive by and conect lol and I was up and running in about 10 minutes. They don't offer a free tiral but you can try it for 1 month for 6.99 and if it doesn't work you will not have wasted 25.00. Just choose to use it for a Touch Pro and you should be able to get the download. I have had it over a year now and it has come in very handy especially when I go home to visit Mom as she has no internet and walking hot spots runs my husband's laptop and mine without any issues. So whatever you ultimately do I hope you get it worked out

WMWifiRouter
I use WMWifiRouter on my phone for internet sharing. It works great. This may be an alternative for you.
http://www.wmwifirouter.com/
(the site appears to be down at the moment)

I just loaded a program called PdaNet and was really amazed at how easy it was to install. Hooked up on Verizon @ 2.4mbps - actually faster than my DSL!!!
I've only tried it a couple times but I recommend going to here http://www.junefabrics.com/pdanet/index.php and download a trial version.

WMWiFiRouter
I second the vote for WMWiFiRouter. I used it on my Mogul and now on my TP2 (both with Sprint) -- no issues whatsoever -- more importantly, no tethering fees.

For me now, when i use USB or Bluetooth over ICS, my browser has to go to 3g.vzwdun.com. It didn't use to do that before. How can I keep the device from reporting that I'm tethering...

USB Tether enabled on stock AT&T?

I searched the Captivate forum to see if AT&T left USB tether enabled on the phone and couldn't find squat. I'm inclined to assume that they disabled the capability unless you paid the extra $20 (or $30, whichever it is) to use the feature. Can anyone confirm please?

It does work
Posting this using the USB tethering feature and have not subscribed to any additional tethering service

1. Enable Airplane mode
2. Enable Wifi, and obviously connect to a wifi network
3. Search Market for PDANet (which is free)
4. Download
5. ????
6. Profit!

I have tethered via USB. you need the generic Samsung drivers Not the att captivate driver. Then Just enable pc connexrion in USB settings and your pc sees the phone as a network adapter.
NO Root required.
Sent from my SAMSUNG-SGH-I897 using XDA App

You can also do ad-hoc tethering.
hxxp://code.google.com/p/android-wifi-tether/issues/detail?id=449#c22

Sorry, didn't know the details, was trying to be funny. Listen to these other guys, but that is how you can install pda net on an unrooted phone.
Sent from my SAMSUNG-SGH-I897 using XDA App

Thanks all. The feature was one of the deciding factors for me to get the phone. Appreciate it

Tethering
I can personally attest to the fact that the Captivate WILL tether straight out of the box with NO third party app needed if you get the right USB drivers installed and just select PC Internet when you plug in the USB.. Wifi tether is a bit more touchy though..

[email protected] said:
Posting this using the USB tethering feature and have not subscribed to any additional tethering service
Click to expand...
Click to collapse
Definitely the funniest post. I read and expected to see that instructions were given too....nope. More of a "I have it and you don't."

He did not ask for directions he asked for someone to verify if it was possible. so take it easy dude

freddieman23 said:
Sent from my iPhone.
Click to expand...
Click to collapse
right...
Sent from my Apple IIe.

alphadog00 said:
I have tethered via USB. you need the generic Samsung drivers Not the att captivate driver. Then Just enable pc connexrion in USB settings and your pc sees the phone as a network adapter.
NO Root required.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I've seen a lot of folks refer to the generic Samsung drivers, but I can't seem to find a link to them anywhere.
Anybody have a link to where I can get them?

Anyone have some details on which drivers work for tethering? I am using the ones off Samsung's site and its telling me that it cannot start up the modem, perhaps im using the wrong drivers.
Thanks for the help

I installed the drivers from here, 64 bit in my case.
Changed USB setting on my phone to "PC Internet".
Plugged in my phone.
Waited for my laptop to setup the ethernet connection (Windows 7).
Disconnected from Wifi on my laptop for testing purposes.
Voila, submitted this post via USB tether to my phone.

gephoria said:
right...
Sent from my Apple IIe.
Click to expand...
Click to collapse
LOL.... i just couldnt stop laughing.

Drivers posted on Samsung US site does not contain network driver for tethering (no supprise there). AndroidForums.com Captivate forum has a sticky to download drivers that do include tethering.
If you don't feel comfortable going that way, you can download Kies from Samsung UK or any other non-US site. Kies has the proper driver included in the installation. If you don't like to use Kies, you can uninstall it and the driver will stay.

I ended up with Kies, The network device connects but I cannot reach open internet. Any thoughts?

Main Target said:
I ended up with Kies, The network device connects but I cannot reach open internet. Any thoughts?
Click to expand...
Click to collapse
It depends how you connect your phone. If you select USB mdoe to 'Kies' mode, you will have to use modem tethering inside the Kies application on your PC to connect. Otherwise, you need to set your phone to 'PC Internet' mode and your PC should be able to connect to internet once plugged in. No Kies needed in this mode.
Personally I don't see much value of the Kies (I can use WMP to do all the media transferring). Hence I uninstalled Kies and left the network driver alone.

This is while its set to PC Internet.

it just randomly started to work, hell I wont complain lol
Posting from a tethered captivate now

Use phone as wireless adapter?(NOT WIRELESS TETHERING)

I want to know if there is a way to use an android device as a wireless adapter? Not wireless tethering of your data connection but the ability to use the wifi connection on your pc.
Sent from my DROID3 using Tapatalk

Turn your data off and turn on your WiFi, connect to the desired network and try to tether via usb to your phone. This should hopefully bridge your connection if you have an aosp ROM. I'm not sure about sense, as I've never tried it on a sense ROM before.
Sent from my PG86100 using XDA App

So you mean download the wirless tether app and use it while data is off? And you can do it via usb?/ I've never used data tethering so idk im a noob
Sent from my DROID3 using Tapatalk

He meant to say, connect to wifi and in settings there will be an option to tether via usb
Although i am also not sure about sense roms
Or you can use a market app
There are many, Easy Tether will do the job
Connect to the wifi network and then use usb tethering

okay well I have a droid 3 so there aren't any roms out for it and when I try a wifi tether app from the market it disables your wifi
Sent from my DROID3 using Tapatalk

Moved to proper section

yus4eel said:
okay well I have a droid 3 so there aren't any roms out for it and when I try a wifi tether app from the market it disables your wifi
Sent from my DROID3 using Tapatalk
Click to expand...
Click to collapse
Okay, so basically what you're going to be doing is using your phone as a USB WiFi dongle. To do this, follow these instructions VERY carefully.
1) Assuming that you are already rooted (via z4root, Gingerbreak, or some other means), search for "EasyTether Lite" on the Android Market and download it.
2) Go into Settings>Wireless & Networks
3) Uncheck the box that says "Mobile Network", "3G", "Mobile Data" or something along those lines.
4) Check the box that says "WiFi" and connect to the desired network.
5) Now, download and install the drivers you need for EasyTether to work with your computer here (note that you are going to do this from your computer and not your phone): http://www.mobile-stream.com/easytether/drivers.html
6) Connect your phone to your computer via USB cable and open the EasyTether app. Enable tethering and with a little bit of magic and fairy dust, you should now have a connection on your computer.
Good luck mate.

Need for same
Need an expert here!
what we look for is using android phone to connect other devices not only to internet but also to each other .
We could do it with our modem,but with tethering is like a hotspot , every device can connect internet but cannot see other devices.
Everywhere i looked was explainin "how to tether" which is built in android 2.2 already.
Helps will be highly appreciated

Is it too simple?
I had trouble getting USB tethering on my macbook, not my PC, but:
I searched the market for USB tethering.
and with "Easy Tether lite" (the first app in the search results; there are other options, I tried this one first and it worked great).
I installed on my phone, ran it, followed the wizard, had to install USB tethering drivers for OS X at some point.
Now:
Phone getting WiFi from my router and entering my computer via usb.
I even set it up now to send this very post!!
cheers,
-nerB
EDIT: (Hmm, your syntax is kind of shaky, original poster... You don't mean use the computer as a wireless adapter for your phone do you?? that would be internet pass-through, yes? I think you do mean USB tethering but using a WiFi source, not the mobile connection. Is this as simple as hooking up a usb data tether but using the WiFi instead of 3G from your phone, such as to use a dingy laptop without wireless to get the WiFi in a Starbucks/etc/etc? Hmm.
Otherwise, your phone is not a WiFi wireless adapter, it has one that your phone OS connects to, which then "usb tethers" to computer...
I've never even seen a usb cable that connects a mobile phone to a mobile phone. Haha. I suppose if you had one, you should be able to USB tether from one phone and Internet Pass-Through on the other.....:/ )

Check out this thing called Bluetooth for that. It works wonders.
Sent from my ICS loving Evo 3D.

solution without additional software while having cyanogenmod
This works with cyanogenmod10 out of the box. Probably also possible with cm7/cm9 too.
Connect phone via cable to pc, connect phone to wifi, enable "USB-Tethering" (Settings -> Tethering/Hotspot), let OS detect the new device, done.
I know this thread has no activity since over a year, but if anybody finds this page like me while searching for this topic, I could be helpful for him knowing a method without using additional software while having cyanogenmod.

Chiefbrain said:
This works with cyanogenmod10 out of the box. Probably also possible with cm7/cm9 too.
Connect phone via cable to pc, connect phone to wifi, enable "USB-Tethering" (Settings -> Tethering/Hotspot), let OS detect the new device, done.
I know this thread has no activity since over a year, but if anybody finds this page like me while searching for this topic, I could be helpful for him knowing a method without using additional software while having cyanogenmod.
Click to expand...
Click to collapse
yet another reason to consider CM flash

Just some questions...
OK GUYS. thnx for the usefull info.
Now i wanna say that suppose we have this wifi dongle for connecting to computer..(see photo attached) we use this for connecting WIFI to our PC's. RIGHT???
NOW i wanna ask if it is possible that we can use our phone instead of this ""DONGLE"" as wifi signal catcher. NEITHER USB NOR WIFI TETHERING(like easy tether lite or many other options available on XDA.) [people are actually asking for "THIS OPTION" so we don't have to spend another 20-30 bucks but they ends up with USB or WIFI tether)
we connect our phone to PC and Search for WIFI Signals on PC... NOT on the phone itself.
please guys, if any one know how to do this then please share. OR please tell if it is possible or not..
thnx...

bump

pump
me too.
I want pc look the android devices (via usb) such as "usb wifi" and control the wifi (of android)

Chiefbrain said:
This works with cyanogenmod10 out of the box. Probably also possible with cm7/cm9 too.
Connect phone via cable to pc, connect phone to wifi, enable "USB-Tethering" (Settings -> Tethering/Hotspot), let OS detect the new device, done.
I know this thread has no activity since over a year, but if anybody finds this page like me while searching for this topic, I could be helpful for him knowing a method without using additional software while having cyanogenmod.
Click to expand...
Click to collapse
Well sir thanks it surely did help some one out and in this case its me so thanks again ....

using linux
im wondering is there anyway to use my phone as my wifi adpater so that ill install kali linux on my pc and receive wireless ssid

Use phone as wireless adapter for pc
just connect to wifi network in android and connect that android to pc with data cable and enable usb tether in android phone

MikeCriggs said:
Okay, so basically what you're going to be doing is using your phone as a USB WiFi dongle. To do this, follow these instructions VERY carefully.
1) Assuming that you are already rooted (via z4root, Gingerbreak, or some other means), search for "EasyTether Lite" on the Android Market and download it.
2) Go into Settings>Wireless & Networks
3) Uncheck the box that says "Mobile Network", "3G", "Mobile Data" or something along those lines.
4) Check the box that says "WiFi" and connect to the desired network.
5) Now, download and install the drivers you need for EasyTether to work with your computer here (note that you are going to do this from your computer and not your phone): http://www.mobile-stream.com/easytether/drivers.html
6) Connect your phone to your computer via USB cable and open the EasyTether app. Enable tethering and with a little bit of magic and fairy dust, you should now have a connection on your computer.
Good luck mate.
Click to expand...
Click to collapse
sorry for bringin up a old thread
but man ure a life saver my dongle died on one of my pcs and i used the same method for my LG G4 works like a charm
thank you a million times man

I actually just tried the above program and it works. It has serious limitations if your not getting the paid version. Blocks a bunch of webs sites and all secure ones. It does work though. I really wish Verizon would not have found it necessary to remove wifi sharing over USB for some dam reason. The S7 I have, had it factory and they removed it. Not sure why? Seeing how it does not have a fuking thing to do with the mobile network. I can actual tether my computer by USB using mobile network and can't from my wifi. Can already bypass they're tethering fee.
I will continue reading and searching till I find a way to undo or work around big reds unnecessary removal of this feature. Even if it involves crawling a 1000 miles on my hands and knees, on broken glass to find some big wig and beating the reversal out of him with the very S7 I'm typing this on.

Samsung S2 - using it as modem

Hi..
I recently bought samsung galaxy s2 and have a few doubts regarding a few features..
The situation is something like this-
My phone is connected to the internet via wifi..
Phone is connected to laptop via usb cable..
And i want to access the internet on my laptop is it possible??
The issue here is -
My laptop (lenovo R60, 2006 make, Win XP) network card seems to be incompatible with the high speed modems.
As when i hover over the network icon in the tool tray it shows 54Mbps and the wifi in the phone is shown as 65 Mbps..
So i suppose this is the problem with the NIC card for the laptop.. Am i right in assuming this?
Please help me resolve this issue..

Sure, use usb tether app. it does 3g, not sure about wifi, but worth a try: https://play.google.com/store/apps/..._apps#?t=W251bGwsMSwxLDEwOSwiY29tLnBkYW5ldCJd

try it with kies
it should let you do that

I just make sure only WIFI data is enabled from the drop menu, and then settings-wireless-tethering then check the USB tethering option

I have tried USB tethering its giving problem with the config file given there for Win XP..
While installing the new hardware using the new hardware wizard it is unable to find the config file downloaded onto the desktop itself..
Tried downloading the PC studio 3.2.2 for samsung and using the network wizard there.. But that too wasnt connecting .. Gives me an option of only removing some connections , which are not there in the first place..
Is there any other alternative for that config file available?
And will switching off mobile data enable usage over wifi on its own? I need it to be wifi only as i do not have any data plans for 3g enabled on my phone..

Thanks a lot.. That USB tether app works.. :good:
And it connects via wifi of phone as well..:victory:

Found that my rooted gs2 phone works fine for usb tether with the juggernaut ROM installed. unfortunately I couldn't tether with the phone connected to the WiFi. I will have to remember that app on the market if the need arises.

Syrusoo said:
Found that my rooted gs2 phone works fine for usb tether with the juggernaut ROM installed. unfortunately I couldn't tether with the phone connected to the WiFi. I will have to remember that app on the market if the need arises.
Click to expand...
Click to collapse
I first tried slickmod 3.6, tried a bunch of other roms afterwrads, but none of them as easy to use and i love the look of it.
You could try this if you don't want an app filled with permissions / ram usage that can be fixed rather easily
[just a question do you have any of the 3 Kies processes running: kies, tray agent, KiesPDLR.exe in task manager while trying to use your phone as a wifi usb?]
Im running slickmod3.6 and all i need to do is enable wifi only from the awsome looking drop menu and then settings tick usb tether and i get my wifi data speed/limit Im pretty sure I tried that with stock Telstra firmware and did not work. Why would i want a permission hungy app for if it's not needed, it has a very modded look to it its great, plus i added some xtras.
Just a thought try uninstall the drivers, download kies (Set all 3 kies processes to not start at boot, msconfig should do it). Only use it when you need to. let it update the drivers (note the new version n.o drivers for future ref) If that dont work uninstall the driver again, and then click scan for hardware changes, let windows update find it.
Failing that, I have quite a few driver packages I have collected with the odin setup zip that I can host on my skydrive just pm me.
Also when uninstalling drivers, and you run into problems delete the ghosted drivers as well, by default you wont see them.

USB Tethering not working at all.

So I am trying to USB tether right? but, for some reason it won't even setup a connection and when I enabled Dedug mode for USB that seemed to get it working. Honestly I don't want to do it that way. I pay for my tethering plan unlike most people on here with T-Mobile.
What I am trying to say is that out the box USB tethering does not work.
Now with Debug enabled I can do it, but when debug is enabled my damn Win 8.1 64 bit flips out! Seriously I don't know what the hell this damn phone is doing to my computer but it forces my CPU to go up to 100% usage!!
I have a 2500 $ laptop bought this year and its a Sager. This laptop has never had an issue until I tried to USB tether while on debug mode...
I need to know how I can just tether this stupid thing to my laptop without using debug OR other apps. I wanna go 100% legit for once! Use every thing how its meant to be used!
Please help!

Is this some kind a joke fellas? NO ONE has seen their computer or laptop flip out when this Nexus 5 starts tethering? Guys this is a major issue that forces my computer to slow speeds once the tether is activated. When the connection is severed my computer works like normal... I was doing tethering on my laptop with a Photon 4G phone and never once seen this issue... I wonder if it has to do with using the infrastructure of the Nexus 5 vs using something like PDAnet or something. Which I can use because I bought it. Easytether sucks though... Well sometimes it sucks.

zoddfrank said:
Is this some kind a joke fellas? NO ONE has seen their computer or laptop flip out when this Nexus 5 starts tethering? Guys this is a major issue that forces my computer to slow speeds once the tether is activated. When the connection is severed my computer works like normal... I was doing tethering on my laptop with a Photon 4G phone and never once seen this issue... I wonder if it has to do with using the infrastructure of the Nexus 5 vs using something like PDAnet or something. Which I can use because I bought it. Easytether sucks though... Well sometimes it sucks.
Click to expand...
Click to collapse
I've tethered a bunch on Windows 7 tho. Never had a hitch problem. Don't know what to tell you.

I just ran into this exact same problem. WiFi tethering seems to work fine, but enabling USB tethering slow my PC to a crawl. Task Manager is particularly slow to respond while USB tethering is enabled. I've tested with two PCs, and have gotten the same results.

Xjph said:
I just ran into this exact same problem. WiFi tethering seems to work fine, but enabling USB tethering slow my PC to a crawl. Task Manager is particularly slow to respond while USB tethering is enabled. I've tested with two PCs, and have gotten the same results.
Click to expand...
Click to collapse
Usually a driver problem bud.

wyrman said:
Usually a driver problem bud.
Click to expand...
Click to collapse
Well then is anyone able to point me toward the correct drivers? The ones that get installed automatically have caused this problem for me now on three different machines, two running Windows 7, and one running Windows 8. The tether works, insofar as I can get online and view websites, but the system slows to the point of unusability at the same time.

Xjph said:
Well then is anyone able to point me toward the correct drivers? The ones that get installed automatically have caused this problem for me now on three different machines, two running Windows 7, and one running Windows 8. The tether works, insofar as I can get online and view websites, but the system slows to the point of unusability at the same time.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2513339

jeremykersh said:
http://forum.xda-developers.com/showthread.php?t=2513339
Click to expand...
Click to collapse
I'm not trying to make ADB or fastboot work. They work fine with no issues. As does MTP. I have trouble when USB tethering is enabled, exclusively.

Xjph said:
I'm not trying to make ADB or fastboot work. They work fine with no issues. As does MTP. I have trouble when USB tethering is enabled, exclusively.
Click to expand...
Click to collapse
I'm sorry didn't you JUST ask for different drivers..... if you already have the google drivers this is your other choice

jeremykersh said:
I'm sorry didn't you JUST ask for different drivers..... if you already have the google drivers this is your other choice
Click to expand...
Click to collapse
Neither the drivers linked, nor the Google drivers as provided in the Android SDK, are the correct driver for the "Remote NDIS based Internet Sharing Device" that appears when using USB tethering. If the answer to the problem is "we don't know, use WiFi tethering instead" then so be it, I'll make do. It would be nice if even one person could come in here and say "I have a Nexus 5 and USB tethering works fine" though, since if this is indeed a "driver issue" there must be someone out there who has this working fine.

Xjph said:
Neither the drivers linked, nor the Google drivers as provided in the Android SDK, are the correct driver for the "Remote NDIS based Internet Sharing Device" that appears when using USB tethering. If the answer to the problem is "we don't know, use WiFi tethering instead" then so be it, I'll make do. It would be nice if even one person could come in here and say "I have a Nexus 5 and USB tethering works fine" though, since if this is indeed a "driver issue" there must be someone out there who has this working fine.
Click to expand...
Click to collapse
I have a Nexus 5 and USB tethering works fine.
that being said i am using vista, using a usb 2 port on my laptop, usb debugging is not checked, using naked driver v.73
posting this while usb tethering.

Xjph said:
Neither the drivers linked, nor the Google drivers as provided in the Android SDK, are the correct driver for the "Remote NDIS based Internet Sharing Device" that appears when using USB tethering. If the answer to the problem is "we don't know, use WiFi tethering instead" then so be it, I'll make do. It would be nice if even one person could come in here and say "I have a Nexus 5 and USB tethering works fine" though, since if this is indeed a "driver issue" there must be someone out there who has this working fine.
Click to expand...
Click to collapse
Sorry to raise a thread, but I am having the same issue as the OP with a Nexus 5 and Windows 8.1. Thethering on USB causes the machine to slow, CPU to spike, although the internet connection is established. Has anyone found any fix? I have tried resetting the device, using it on another machine and it still has the same issue.
As soon as the Remote NDIS based Internet Sharing Device is listed in Device Manager, my machine spikes. Have tried uninstalling the driver and letting in re-install as well. Driver for the NDIS piece is from Microsoft. Can't find anything else.
Thanks!

i have the same issue, always have done and the only solution i found was just to use wifi tethering. tried changing drivers but nothing has worked.

i have this issue on a samsung galaxy note 10.1 2014 edition P605 uses the Remote NDIS driver like the nexus 5 wifi teathering perfectly fine USB Teathering is bad the driver will dropout or if i unplug the tablet from the computer it will either speed back up or act as if it is still connected.... when rebooting it will not reboot if i have unplugged it and it still thinks its connected but if i dont unplug it and reboot it will blue screen with a usb bugcode or something like that....
ps sorry for posting to this post even though my issue is with a SGN10.1 2014

Had anybody figured out a fix for this crazy issue? I've been trying to fix this for a while now but nothing seems to working!

bump.
i still cant get usb tethering to work at all

mark2410 said:
bump.
i still cant get usb tethering to work at all
Click to expand...
Click to collapse
Same problem here.
I can also use ADB shell with the drivers but when I enable USB Tethering the computer starts to slow down and CPU to 100%
(Using OnePlus btw)
Thanks!

I have the same problems. Was anyone able to solve the problem?
---------- Post added at 04:05 PM ---------- Previous post was at 03:29 PM ----------
buzz lightyear said:
I have the same problems. Was anyone able to solve the problem?
Click to expand...
Click to collapse
I was able to solve the problem by changing the driver of the device. In case anyone is interested, here are the steps
Plug the phone to the USB and enable USB tethering
Go to Device Manager. Under Network Adapters a "Remote NDIS based Internet Sharing Device" should be listed. Right click on it and click on Update Driver... > Search on the computer > Choose manually from a list....
Here, uncheck Show compatible hardware, then go to Microsoft and search for "Remote NDIS Compatible Device" on the right. Click next and Yes in the warning message that appears. Now the computer should behave normally.

Thanks buzz. Worked for my Nexus 5x