Related
i dropped my Fuze today and i cracked the screen. I'm trying to figure out if its the digitizer that cracked or the LCD can anyone tell me how to check. The screen looks fine when i have it on the black background its hardly noticeable, but when I text you can tell its cracked pretty nicely. I can still use it and see everything just that it annoying and want to get it fixed. They sell them on Ebay for pretty cheap (digitizer that is). i also was wondering if anyone knew where to find instructions on replacing the digitizer I can't seem to find anything.
Any help would be greatly appreciated...
Thanks
Post some pictures up. Maybe someone can help by looking at it.
regardless if its just the digitizer or the screen, from what I've read, its easier to probably change them both. You're looking at a cost of no more then $100. That's a little bit over what you can find them for on the bay. i dont think the digitizer was actually meant to be easily disassembled at our level. If you need help disassembling your TP otherwise though, try mikechannon.net
I'll have pictures up tonight....
I just figured it out that its the touchscreen itself... The LCD is intact because there is not bleeding of any sort..... Does anyone know of a place that repairs this sort of thing?
Not recommended to separate digitizer with the lcd. It has a special glue (more like clear double tape) to attach them together that really really sticks. I tried to separate them with cutter blade and crack the lcd. There was an advise I read on the internet somewhere to use dental floss. Try google it.
And be careful of choosing the replacement, you could end up with this problem. Well ... I did....
I just got my digitizer in the mail and contemplating doing the repair myself.... has anyone done it or can point me to the right direction to just replace the digitizer?
Good Luck .....
Below are pictures of the result. I don't know the correct procedures of separating those two.
Just .... don't do my mistakes.
Good Luck.
Hi all,
I sat on my Fuze, short and simple. There is now a weird crack on the screen. I am very familiar with what a broken LCD looks like, there is no LCD "liquid" oozing all over the place, and the picture is not distorted in any way. It looks like some kind of lens INSIDE might be broken, and I think it's the digitizer. The cracks stop once they get to the dark grey at&t/HTC border around the screen, even though I hit very close to it, so whatever I cracked is under the top lens/protector.
Also, I read online (albeit at a cell phone repair website) that you can't replace the digitizer without ruining the LCD. Is there any merit to this, or are they just trying to convince people to pay their obscene $149 to replace a $30 part?
So I guess I have two questions:
Did I break the digitizer, the topmost lens, or somehow the LCD glass without damaging the LCD itself?
How hard is this to replace?
Pics:
EDIT: I ordered this on April 17th. Fat chance AT&T will do anything about it, right?
That looks like just the digitizer... I purchased the digitizer already, but haven't gotten the chance to take it apart yet.... to be honest I'm very nervous about taking it apart.. I'm still trying to figure out how to split the two pieces apart (the keyboardbase and the slide screen....
wxy117 said:
That looks like just the digitizer... I purchased the digitizer already, but haven't gotten the chance to take it apart yet.... to be honest I'm very nervous about taking it apart.. I'm still trying to figure out how to split the two pieces apart (the keyboardbase and the slide screen....
Click to expand...
Click to collapse
If I'm not mistaken (and I might be), all this should take is removing the two small phillips head screws on the back of the screen that show when the phone is slid open. I landed on this thing while it was open, and drove my knee right into the screen, I'm surprised I didn't break anything else.
There are three more screws that you can't see behind the screen.... when its slid open you can only see 2 screws... There are actually 5
wxy117 said:
There are three more screws that you can't see behind the screen.... when its slid open you can only see 2 screws... There are actually 5
Click to expand...
Click to collapse
So we do have to take the whole damn thing apart?
Does anyone have any luck with AT&T replacing things that are clearly accidental damage? With all the horror stories I hear about refurbished phones and the chance that they might send me one, I'd actually rather take my chances at fixing this. I've taken apart a ton of phones and fixed them before, and worked at a cell phone repair shop for a few months. I still have most of my tools lying around, including all the screw drivers I'd need to open this.
I was able to find an HTC service manual that doesn't really explain how to replace the digitizer. It does describe how to get it in two pieces, but I wouldn't know where to go from there.
I have the digitizer in my hand... There is a thing that hooks up to the phone itself so yes i'm pretty sure you have to take apart the entire thing.... I think i'm gonna take the phone to NYC and have someone that knows what they're doing repair it. I tried to get warrenty repair, but they said no because it is accidental damage. i pretty much tried everything before I ordered a new screen.
wxy117 said:
I have the digitizer in my hand... There is a thing that hooks up to the phone itself so yes i'm pretty sure you have to take apart the entire thing.... I think i'm gonna take the phone to NYC and have someone that knows what they're doing repair it. I tried to get warrenty repair, but they said no because it is accidental damage. i pretty much tried everything before I ordered a new screen.
Click to expand...
Click to collapse
Found a good complete disassembly guide in Russian, why does the screen have to be the LAST thing to come out? I am now looking to buy an LCD/digitizer combo, but I can only find the one from Brando that is made for regular HTC Touch Pros, and not the Fuze (has a camera cutout instead of the AT&T logo).
If I end up having to replace the LCD I'd much rather break it trying to save $50 than just toss it. Is it really that hard to separate the digitizer from the LCD?
http://translate.google.com/transla...ka/htc-touch-pro/&sl=ru&tl=en&history_state0=
has anyone had success separating the Digitizer and the LCD screen?
wxy117 said:
has anyone had success separating the Digitizer and the LCD screen?
Click to expand...
Click to collapse
Well, we'll find out. I ordered both an AT&T Fuze digitizer by itself as well as an LCD with a digitizer attached. I'm just going to go ahead and replace everything with the combination unit and see if I can replace my broken digitizer without breaking my LCD in my free time. If it works, I have a spare or I can sell it
be careful I got my digitizer and they sent me the wrong one. They sent me one for a sprint touch pro....
wxy117 said:
be careful I got my digitizer and they sent me the wrong one. They sent me one for a sprint touch pro....
Click to expand...
Click to collapse
Hopefully I'll get it right, I made sure to order an AT&T Fuze digitizer that made it clear it wasn't for use with Sprint Touch Pros or Touch Pros with front facing camera.
The LCD+digitizer I ordered though may very well show up as any of the above, if they're not already attached I'm going to use the AT&T Fuze digitizer on the new LCD, and try and make a new working combo from my old LCD to resell. I'll make a detailed step by step with photos as well.
Don't forget to read this
They just sent out my new one today.... So anyone that needs a digitizer for the Fuze by Sprint hit me up.... They told me to keep it so now I have an extra digitizer that doesn't work for my phone...
I think I can help you cos I repaired LCD and digitizer on Raphael a week ago. Digitizer and LCD are two separate parts joined by flat printed wires. If you need to change just one of them you will need to take apart whole phone.
Raphael consists from 2 main parts - 1. that one with keyboard 2nd part with LCD. You have to take apart both what is quite hard to realize if you this for the first time.
Once you are with your LCD you will see the flat wires grom lcd and digitizer meerged. Split them with your solddering gun carefully! Take new digitizer and solder flat wires together. Anyway there is no glue or liquid fluit or whatever between digitizer and LCD. But - remeber especially those who replacing just LCD - there is kind of black tape around the backside of LCD part (the silver side) - take it apart from old lcd and move to new one. If you dont you will see the rainbow on your LCD but just after assembling whole device together - it is quite concerning if you find out this kinf of malfunction just after such a hard work like a assembling this hellmade device
Good luck to everyone!
pisqle said:
I think I can help you cos I repaired LCD and digitizer on Raphael a week ago. Digitizer and LCD are two separate parts joined by flat printed wires. If you need to change just one of them you will need to take apart whole phone.
Raphael consists from 2 main parts - 1. that one with keyboard 2nd part with LCD. You have to take apart both what is quite hard to realize if you this for the first time.
Once you are with your LCD you will see the flat wires grom lcd and digitizer meerged. Split them with your solddering gun carefully! Take new digitizer and solder flat wires together. Anyway there is no glue or liquid fluit or whatever between digitizer and LCD. But - remeber especially those who replacing just LCD - there is kind of black tape around the backside of LCD part (the silver side) - take it apart from old lcd and move to new one. If you dont you will see the rainbow on your LCD but just after assembling whole device together - it is quite concerning if you find out this kinf of malfunction just after such a hard work like a assembling this hellmade device
Good luck to everyone!
Click to expand...
Click to collapse
Thank you for some rather broken, but very helpful advice. Kinda sucks that I'm really happy since I don't have to worry about removing any adhesive, but now I have to sit here and solder flex cables. I shoulda bought a spare one
Do they ship these parts on pigeons from Hong Kong?
To anyone counting on being able to separate the LCD from the digitizer, DON'T. There is absolutely no way to separate them without destroying either or both. Also, take extreme caution when peeling up the flex cable, it is very easy to tear (I tore mine).
So my net cost, 80 + 50, LCD/Digitizer and Flex Cable = $130 vs. sending it to HTC $150. I advise anyone to just pay them rather than take this thing apart.
from my understanding people have done it before... Maybe you just had bad luck? Well we'll see when my screen comes in *crossing fingers*
wxy117 said:
from my understanding people have done it before... Maybe you just had bad luck? Well we'll see when my screen comes in *crossing fingers*
Click to expand...
Click to collapse
Fact of the matter is when people say this is a delicate phone to take apart, they mean it. I worked at a cell phone repair store for a few weeks, and learned how to take apart damn near anything (thank God this was before the iPhone existed). Not only are both flex cables in this phone taped down in 100 different places, making them very easy to tear while removing the tape, the adhesive used between the LCD and digitizer is STRONG. If you really wanted to separate them, you might have some luck with a straight edge and maybe an hour. Good luck, I'll let you all know how this turns out once I have my new flex cable, since I conveniently tore the volume buttons off the original.
I just got my screen today so we're gonna see some time next week how we do on this screen replacement....I'll let you know how it goes....
So far no luck with my digitizer. Has anyone had any luck just changing out the digitizer yet? The guy that was suppose to do mine is backing out because he doesn't want to risk cracking my LCD. I don't blame him thats the reason I didn't do it. sheik124 what are you doing with your damaged fuze? Are you sending it to HTC for repairs?
Hi, I dropped my galaxy S on very rough surface and resulted in the metallic frame with ugly dent.
Is the metallic frame replaceable?
Is yes, I need help on guide how to do it.
Also anywhere I can place order for the frame?
Thanks in advance for the help
You can pretty much forget it. The screen is glued to the part you mention and the middle frame. You basicly have to remove te screen aswell as the sensorbuttons.
sorry to bring a thread up from the grave, so its pretty much HIGHLY recommended not to even attempt to replace this part ? (if its glued to the screen, then i guess thats a yes?) Ive wanted to replace it for a while; thought it might just slide off or something...from previous comment i guess not ?
Evening all.
So my beloved DHD needs the screen and digitizer replacing. Ive done the necessary reading/ searching and ive also located what appears to be a decent replacement.
Here is the thing.......
Has anyone successfully managed to do the replacement and keep the " Home, menu, back, search " buttons lighting up post screen replacement ? If so i would really appreciate some pointers on how you did this.
Thanks in advance
i replaced a digitizer / display on my dhd once and did the same on some Hd2 before.
On DHD its really difficult to replace the screen / digitizer. You most likely damage the plastic frame around the screen and indeed the arrangement of the Leds are no easy too, but not too hard to maintain. I wouldnt change the screen of anyone others DHD, just my own.
Yes, ive read that the replacement process is somewhat fiddly / tricky and no i would'nt do it for anyone else either. Im going for a pre assembeled screen / digitizer.
digitalizer is glued on lcd and lcd is glued on the middle metal plate, removing lcd from the plate requires heating it and it sure isn't fun, even after heating it it is still hard to remove without damaging the plastic frame, if i were you i would take it to a service shop with already bought part and paied them to change it, trust me it is not worth the nerves and the time
I'm a very handy guy and I accidentally tore a ribbon cable separating the pieces glued together. It's very hard, worth paying someone.
alextheg said:
Evening all.
So my beloved DHD needs the screen and digitizer replacing. Ive done the necessary reading/ searching and ive also located what appears to be a decent replacement.
Here is the thing.......
Has anyone successfully managed to do the replacement and keep the " Home, menu, back, search " buttons lighting up post screen replacement ? If so i would really appreciate some pointers on how you did this.
Thanks in advance
Click to expand...
Click to collapse
yes, but it was a pain, hold the pieces in place with double stick tape and be careful not to bend them!
Yup I successfully managed to replace a digitizer but I'm also a trained phone technician.
The most important thing is to be very careful. You should never have to use force in order to disassemble a phone.
How to get the cracked digitizer off? Simple, use your oven.
* Place the display-module (Chassis, digitizer,LCD) on a tray, make sure the plastic parts don't touch the bottom, so that it doesn't melt.
* Heat the oven to about 80-100 degrees celsius.
* The display should come off pretty easily.
* If you've done it properly, you can use the same adhesive that was one the chassis/frame if not you'll have to purchase some slow drying adhesive and carefully place it around the edges.
* Carefully move the light-guides on the bottom of the screen to the new digitizer. There's a small amount of adhesive on them so don't get any sweat on them. If they don't stick just use a very very, I'm talking pixel size amount of adhesive on it to get it to stick.
That's about it. Thread the flex-cable around the display and use a tweezer to connect it.
Hello all I hope someone here can guide me because I am at a loss.
A couple weeks ago I cracked my screen and have been searching for a replacement
Digitizer since then but everywhere I look is either out of stock or comes with the
LCD (which I don't need ).
I know this is a bit forward for my first post here but I am hoping someone
may have a suggestion as to where I might be able to pick one up so I can finally get my phone back to it's
original glory.
Thanks in advance for any help/suggestions on this matter.
In htc digitzer and screen are unity, so if you have problem with touch, you have to change all screen.
ampedoe Luise
SkuterPL said:
In htc digitzer and screen are unity, so if you have problem with touch, you have to change all screen.
Click to expand...
Click to collapse
From what I have read the glass and the digitizer are one piece but it is possible to separate the LCD in this guide :
androidforums. com/htc-one-s/609247-how-fix-htc-one-s-screen.html
Problem is every website I have looked at the glass/digitizer is out of stock and it's triple the price to get it with the LCD.
you can't separate, because in amoled all layer are connected in fabric.
http://www.oled-display.net/wp-content/uploads/u2/super-amoled-technical-details.jpg See this pictrue the touch sensor is under glasses.
i repair phones for a living. and i'm telling you, DO NOT ATTEMPT TO TAKE APART THE DIGITIZER AND LED!!! most new htc phones, like the iphone 4/4s and newer samsung phones the glass and display come together. yes, it is possible to take them apart, it's more hassle then it's worth, you are almost guaranteed to break your display (unless you've done it a few dozen times) and then when you try to put everything back together, it will not fit together right because the LED will be warped by your pulling and bending it out of the frame. also, any part you see sold as just the digitizer is either not the correct part and even if it fits and works it is not OEM
HidaKureku said:
i repair phones for a living. and i'm telling you, DO NOT ATTEMPT TO TAKE APART THE DIGITIZER AND LED!!! most new htc phones, like the iphone 4/4s and newer samsung phones the glass and display come together. yes, it is possible to take them apart, it's more hassle then it's worth, you are almost guaranteed to break your display (unless you've done it a few dozen times) and then when you try to put everything back together, it will not fit together right because the LED will be warped by your pulling and bending it out of the frame. also, any part you see sold as just the digitizer is either not the correct part and even if it fits and works it is not OEM
Click to expand...
Click to collapse
I appreciate you taking the time to clarify that for me, I had hoped it would have been easier than that. I can start looking for the correct part now and finally get my phone sorted out.
Again thanks for your help.
Question:
My sweet little girl scratch "gorila" glass on my one s.
Is it possible change only glass, i plan to buy spare part from this link:
etradesupply.com/oem-htc-one-s-glass-lens.htm