Decided to take the plunge and flash my Dash 3G..downloaded the Dash3G HardSPL by JockyW, unzipped it on my PC and ran the auto.bat. Copied JumpSPL. exe to my phone and executed it on the phone. Ended up with a Jump address dialog box.
I'm sure I have overlooked something, but can't figure it out. HELP!
Thanks in advance.
Next steps
Figured out my problem, but have now ran into another.
When I get to the point where I click the trackball to continue execution of JumpSPL, the phone displays turns dark and then I lose USB connectivity. The romupdate displays on my PC, but I am unable to reconnect via ActiveSync. Ideas?
That's normal. After the JumpSPL starts on your phone activesync disconnects. Another type of connection (htc sync, you should see the driver in devicemanager) takes over.
Thanks Jockey. That may be the issue as it doesn't ever appear to switch to htc sync. I am also not seeing anything like that in the device manager. Ideas?
I do see JumpSPL on the phone.
I appreciate your help.
Related
So I am trying to play with my new tilt for the first time, and after lots of reading I began to try. I am starting with POF's Hard Spl package, and I am stuck with that. I followed all of the instructions precisely, but when I get to the RUU screen, it says to connect PDA phone to the USB cable, and establish an Active Sync connection. Well it won't establish an ActiveSync connection now...and if I just check the box, I get the ERROR [260] Connection message, and it says to hit esc to finish. Then the phone is just stuck on the tricolor screen, and only thing I can do is reset.
So....now what? I have tried to google and xda search this problem, I saw one person with the same problem, but then posted back a little while later saying he resolved the issue, but didn't say how...
Any ideas?
Thanks in advance,
Michael
memnoch_thedevil said:
So I am trying to play with my new tilt for the first time, and after lots of reading I began to try. I am starting with POF's Hard Spl package, and I am stuck with that. I followed all of the instructions precisely, but when I get to the RUU screen, it says to connect PDA phone to the USB cable, and establish an Active Sync connection. Well it won't establish an ActiveSync connection now...and if I just check the box, I get the ERROR [260] Connection message, and it says to hit esc to finish. Then the phone is just stuck on the tricolor screen, and only thing I can do is reset.
So....now what? I have tried to google and xda search this problem, I saw one person with the same problem, but then posted back a little while later saying he resolved the issue, but didn't say how...
Any ideas?
Thanks in advance,
Michael
Click to expand...
Click to collapse
Yes. Use another computer.. or disable your firewall or de-activate your AntiVirus program. You have some sort of conflict in the drivers. It happened to me and the only it worked for me is when I switched to another PC to do the upload.
I will have to try it out on my laptop when I get up...but I have no firewall enabled, and no anti-virus running. But if this is a driver issue, then I don't see how those 2 things would come into play?
So, switching to my laptop worked, thank you for that. I have sucessfully installed Dutty's v3 rom, but now it seems my battery depletion is on a downward spiral. It has gone down 10% in less than 10 mins, and it is just sitting on the table, nothing running.
Any ideas on that?
Also is there anything else after the rom install that I should add/do? I
have seen a few different posts about radios...not sure will keep looking lol...
Thanks again,
Michael
I had the Error [260] Connection issue at some point in the beginning of flash process.
Changing to a different usb-port in my laptop solved it to me.
All,
Read the forums and done all the searches but struggling. Download the Kaiser-HardSPL exe and ran it on my PC (using XP). Get the tricolor and USB screen but then it tells me to disconnect and reconnect USB, but it never goes green again so consequently it doesn't go any further. I've reset the Kaiser and tried again but no joy. Thanks in advance
Read carefully, when you're in the tri-color screen and unplug/plug your device, the activesync icon shouldn't be green cause it is not able to detect your device as a WM one.
Gray is the way to go
j1ngles said:
All,
Read the forums and done all the searches but struggling. Download the Kaiser-HardSPL exe and ran it on my PC (using XP). Get the tricolor and USB screen but then it tells me to disconnect and reconnect USB, but it never goes green again so consequently it doesn't go any further. I've reset the Kaiser and tried again but no joy. Thanks in advance
Click to expand...
Click to collapse
Yes, I saw that. The icon has gone grey on my desktop. The next step though says connect the PDA back again via usb and establish a connection. How do you know if it has established. I clicked ok anyway ran the program but it can't read the existing rom info off my kaiser and comes back with a connection error
If i'm correct you should wait for a minute or two to let the ActiveSync connect to your Kaiser. After that it should be good to go further..
Be sure that the ActiveSync icon on your computer desktop is green at that stage..
j1ngles said:
Yes, I saw that. The icon has gone grey on my desktop. The next step though says connect the PDA back again via usb and establish a connection. How do you know if it has established. I clicked ok anyway ran the program but it can't read the existing rom info off my kaiser and comes back with a connection error
Click to expand...
Click to collapse
On your screen, at the bottom, it should say USB.
Once you see that you are ready to install the HardSPL
OK guys success. I think what threw me was the activesync staying grey during flashing but found a nice vid on youtube which helped. Many thanks
Hi all I know there's been many a post about being stuck in the bootloader and I even went to the wiki to see what to do.
Firstly, when following the wiki (http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader) on the mtty_utility there is no option for USB only comm 1, 2, or 3 (am i being stupid?).
Secondly, I had a guess and tried all the comm's and eventually comm three seemed to be the only one working, but when I type in the commands it does not do anything.
Any help would be greatly appriciated as I would hate to see my uni go its been so good to me.
Thanks in advance
Jo
Please help
The USB option is at the very bottom of the list. Unless your PC isn't registering the ports, you should be able to get MTTY to work for that part at least.
Thanks for the reply but there wasn't a USB option, I've tried everything, I think it may be to do with vista continuously wanting to run mobsync.exe whenever I plug the uni in but there's no way to stop it.
I've tried ending it as a process but mtty still doesn't have the option of USB.
If you have any ideas please post them, am I right in beleiving that you cannot charge in bootloader mode? Or is that just off the USB?
Thanks
Jo
P.S. The laptop I'm using can read other things through the USB ports, and I have tried every port just to double check that they are not all on the same line (ie an internal hub).
I think it may have something to do with Vista... I'm not sure as I don't have a Universal...
If you have access to XP it may be faster and easier...
I think you may be right
I shall wait untill my housemate gets back in, if it doesn't work in safemode!
Cheers for your help anyway!
I shall keep all informed just in case anyone else ever has this problem
Got it working!
Right finally got it working! It took some time but I managed to revive it!
1) Connect your device in bootloader (Hold light button, power button, and reset),
2) Open Windows Mobile Device Center and in connection settings uncheck Allou USB Connections,
3) Goto contol panel-administrative tools-services and start windows mobile device connectivity and windows mobile device 2003 connectivity,
4) goto device manager and find your device and update the driver to the one that can be found here: http://forum.xda-developers.com/showthread.php?t=313001&highlight=vista (it is the one in the modem folder, do not follow their instructions, it will not work in this case),
5) Open task manager and kill wmdc.exe, or anything with wm infront of it, also kill mobsync.exe
6) Goto: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader and follow the instructions (you should be able to see USB as an option now).
In mtty it took a couple of commands before it actually executed then once finished it looked as though it were completely dead, but connect the uni to the comp again in bootlaoder mode and all should be well!
With Reference to:
http://forum.xda-developers.com/showthread.php?t=291723
PS could someone put this in the wiki under the title "If mtty does not have the USB option in vista" I'm being a dunce and don't really know how to do it
I am running WM 6.1 (Michyprima Full) and I wanted to flash to another ROM, however for some reason my phone will no longer connect to activesync on the desktop (tried two pcs). It can sync just fine via exchange.
Nothing has changed on the mobile device or the desktop; ActiveSync on the mobile device is set to allow connection via USB and activesync on the desktops is set to use USB to sync.
I know the underlying connection is ok because the device will start charging from the USB cable when it is hooked up.
What can I do to fix this situation so I can flash to a new ROM? I do not need to save anything on the device... I have tried soft-resetting.
EDIT: Also when I list USB connected devices on the desktop PC, I see one called "Windows Mobile-based Device"
did you use a ram cleaner
i used a ram cleaner and my device dosent get recognised by pc.let me know if you find a solution.
padanfain said:
I am running WM 6.1 (Michyprima Full) and I wanted to flash to another ROM, however for some reason my phone will no longer connect to activesync on the desktop (tried two pcs). It can sync just fine via exchange.
Nothing has changed on the mobile device or the desktop; ActiveSync on the mobile device is set to allow connection via USB and activesync on the desktops is set to use USB to sync.
Click to expand...
Click to collapse
Have you tied going to Start/Settings/System (or Connections) and running USB to PC? Try unchecking 'Enable enhanced network' then OK back to the start screen and try reconnecting.
If that doesn't work, try a hard reset with the current ROM, and see if that fixes it. If so, you can then flash the new ROM.
If it still doesn't work, I think you can flash using a memory card or the Flash Drive without needing to access the PC.
padanfain said:
I am running WM 6.1 (Michyprima Full) and I wanted to flash to another ROM, however for some reason my phone will no longer connect to activesync on the desktop (tried two pcs). It can sync just fine via exchange.
Nothing has changed on the mobile device or the desktop; ActiveSync on the mobile device is set to allow connection via USB and activesync on the desktops is set to use USB to sync.
I know the underlying connection is ok because the device will start charging from the USB cable when it is hooked up.
What can I do to fix this situation so I can flash to a new ROM? I do not need to save anything on the device... I have tried soft-resetting.
EDIT: Also when I list USB connected devices on the desktop PC, I see one called "Windows Mobile-based Device"
Click to expand...
Click to collapse
Have you tried completely uninstalling ActiveSync from your computer, reboot, download and re-install ActiveSync. Its worked for me - sometimes the USB drivers become corrupt.
When I try and hit ok to commit the change of unchecking the advanced network functionality (it was checked before), the device just sits there with the spinning thinking wheel. Doing a soft reset and going back into the usb to pc shows the box still checked.
I will try a hard reset.
padanfain said:
When I try and hit ok to commit the change of unchecking the advanced network functionality (it was checked before), the device just sits there with the spinning thinking wheel. Doing a soft reset and going back into the usb to pc shows the box still checked.
I will try a hard reset.
Click to expand...
Click to collapse
I think thats the only answer at present- the inability to change the A/S settings on the device suggest something's got corrupted somewhere
I was able to get it to sync after a hard reset.
However, when I attempted to load Michy's light ROM the device rebooted and sat at "Loading..." with a white screen. The wrapper then said error connection failed.
If I soft reset the device it comes back to the loading... screen; if I hard reset the device, it comes back to the loading screen after the hard reset. How can I fix this?
blast. left the stupid sd card in while i did the first flashing.
Removed SD card, re-hard resetted, then re-ran the ROM updater.
Sometimes its OK, sometimes it isn't- just one of those little mysteries I guess!
Glad its OK now. Michy's Lite ROM is excellent
Solution for deleted active sync notification called replog
YES...you guys definitely ERASED your Active sync NOTIFICATION file called replog. As someone suggested...he ran his CLEANER...then the problem begun.
It is true that Hard Reseting the device will get you back that file, but there is an easy way to do it...I can't find the original article but this file I will post will RE-CREATE that deleted replog notification file that is needed by active sync to work.
So next time you try and clean-up...just make sure you won't delete any file named replog
To use this FIX, just place it on your SD Card and run the file. If you want you can create an icon at Windows>Start Menu>Programs>to whatever folder... that will work too for easy access.
Just a word of caution...DON'T RUN THE FILE MORE THAN ONCE...why? Because it will re-create the file again. Although it won't hurt in any way except eat up internal memory, but you don't want any duplicated file... right?
I posted this under the HardSPL thread, however nobody has responded for days, so I'm starting a new one.
I have a Verizon TP2 and Windows Vista 32bit. I have successfully connected with WMDC and am in "Connected" status. If I run the unlocker in Auto mode the program crashes back to the desktop. If I run the program in Manual mode, I get to a screen that says my current image version is 1.18.605.12 and can select the Update button. When I do that it says I want to update from 1.18.605.12 to 1.00.OliNex and I click Next. I get the percentage bar window momentarily then a window pops up saying "ERROR [246] : DEVICE IS NOT RESPONDING, click Exit to quit. I've installed the enablerapinew.cab and installed it to device, but still no love.
Any ideas, I've tried disabling AV, rebooting phone, rebooting computer, different activesync modes, etc.
I have the Same issue
same here
Got the same issue tried everything pretty much so far. I PMed cmonex and waiting for respond now .