htc diamond wi-fi problem - Touch Diamond, MDA Compact IV Accessories

my diamond was working properly until recently where the wi-fi can not be enabled. I have tried anything that is supposed to enable it manually but the problem still exists. Does anyone know any other way to enable it or even to see if the radio transmitter is not burned? anyhow, bluetooth and gsm transmitters are working ok.thx

Related

What type of GPS does the 2125 support?

I just came across a Cingular 2125 running Windows Mobile v6.1 being used on ATT Wireless network here in the states, An upgrade from my Nokia 6085. I would like to make it GPS Enabled even if I have to purchase a Bluetooth GPS Receiver (since I cant get my BT353 USB GPS Receiver work.)
Most all of the BlueTooth GPS Receivers I see use the Serial Port Profile (SPP) and I cant tell for sure but from what I read and can tell the 2125 doesnt support this Bluetooth Profile.
Yet alot of wesite I see including the ATT website says the 2125 supports external bluetooth gps receivers. Says 2125 is compatible with ATT Navigator with use of a BT-359C via SPP so im confused.
Can I used GPS Navigating software on the 2125 running WM5? And if so What GPS Reciever can I use. I was hoping to be able to use my BR-353 but not sure were to find usb driver that will work under WM5. The ones provided from usglobalsat are only for PPC and not WM6.
Any thoughts?
Many thanks,
SomeGuy
Anyone?
Just want to make sure that if I purchase a Bluetooth GPS Receiver it will work. Any recommendations on any paticular gps receiver?
SomeGuy
:BUMP:
Will a Bluetooth GPS that supports SPP profile work with the Cingular 2125?
Please Please!
I've used both of the Dell Bluetooth GPS units. One is the BT309 and I'm not sure the number of the newer model. I don't see why any Bluetooth GPS wouldn't work. Just select it and add a serial port for the connection. Then point whatever software you have to it. I'm using TomTom 5.2 which I guess is the last version for smartphone. I read somewhere that you could also run TomTom 6 (PPC version) but I can't figure out how (unless you use a ppc rom?).

Bluetooth turns off randomly

Hi,
I am using my HTC Touch Pro with an Opel Vectra built-in bluetooth carkit.
All functions, like browsing the address book and call registers, are working fine. However, at random times, my carkit reports no phone. When I then check my Touch Pro's bluetooth status, I see that it is has been disabled.
After manually re-enabling it, I can pair with my carkit for as long as it takes for bluetooth to turn itselves off again.
I've already tested with JETware, but that does not change anything. Also tried the universal broadcom bluetooth stack, but doesn't seem to work on the Touch Pro. HTC only comes with a standard answer that they don't support all carkits and headsets... Since the BT stack on the phone seems to crash, I don't think it's a carkit issue.
Anyone here with the same issue? And maybe a solution?
Thanks and regards!!
Start -> Settings -> Connections -> Bluetooth -> Timeout (tab). Turn off Visible mode set to "Never".
I think this must be your problem.
Hi Freco,
Thanks for your reply! This option is set. However it's not really the visibility that turns to invisible, but the whole bluetooth stack is being turned off completely. Need to fully re-enable it via Comm Manager.
Any other options? Does anyone know if there is a working broadcomm stack for the Touch Pro?
Regards!
Hi,
I have exactly the same problem with a Vauxhall kit, I have tried all sorts of things, but nothing seems to work
try:
start -> settings -> connections -> bluetooth
timeout tab
select 'never' from drop down box
Hi Brendo,
Unfortunately this doesn't solve the issue. Once paired, the connection even works without being visible. It's also not a fixed period of time before the disconnect takes place (can be within a minute, sometimes after half an hour). However, the whole bluetooth icons disappears from the top icon bar and comm manager shows it's turned off completely.
Hope somebody has any other ideas, because the only thing HTC can do is point to the carkit vendor :-(. Since all functionality is there when connected and the phone is turning off BT in some way, I really don't think this is caused by the carkit vendor. I should at least expect BT to stay enabled on the phone.
Thanks!
Yes, same here, BTW I have tried this in my Friends Saab, and the same problem.
same problem here with a Opel DVD90 buildin bluetooth carkit.
With other htc phones it always worked like a charm, but my mda vario IV continuously disconnects after a random time period and shuts down the complete stack.
Try this!
I have the same problem with my opel with original bluetooth-kit (2007). On the touch pro I changed the band and network from auto to GSM, as G3 reseption in this area is quit poor, especialy while driving. It helped for me, at least the last few days. I agree this has been an annoying problem.
I have tried to switch to "GSM only mode" in the past, but as far as I remember it does not completely solve the issue. However, I will give it another shot! Actually I can't figure out at what point it occurs... It can happen within a minute or after half an hour without using any funtion.
Does one of you know if there is a way to do some debugging on the Bluetooth stack?
And has anyone experience with other Windows Mobile 6.1 based phones in this combination (just curious if it's a WM issue or HTC only)?
Furthermore I did some tests with JetWare. You should be able to limit the number of synchronised items then (might be related to this issue). However, it looks like this configured limit is being totally ignored: when I limit my recent call list to 5 with JetWare, it still syncs about 25 items. Anyone tested with Jetware?
I have tried the GSM only mode, this didn't help either
I have now given up and got myself a Nokia E66, which works perfectly.
All contacts are pushed to car, no disconnects and AD2P works so my mp3 ringtones play through the car speakers! Sweet
Word of note, I had issues with N-Series phones, would connect ok, but contacts would not push.
I have the samen problem with my HTC Touch Pro and Saab.
bluetooth pairs just fine with my pioneer bluetooth enabled deck, but the problem iwth mine is once i receive a call sometimes no sound comes from the car, instead the earpiece is still on. but if i initiate the call first sound works just fine and earpiece on the phone is disabled, BUT once the call is ended bluetooth disconnects randomly and the phone takes a good 1-2min to reconnect. i absolutely hate the bluetooth on this phone!
ExTREmE99 said:
bluetooth pairs just fine with my pioneer bluetooth enabled deck, but the problem iwth mine is once i receive a call sometimes no sound comes from the car, instead the earpiece is still on. but if i initiate the call first sound works just fine and earpiece on the phone is disabled, BUT once the call is ended bluetooth disconnects randomly and the phone takes a good 1-2min to reconnect. i absolutely hate the bluetooth on this phone!
Click to expand...
Click to collapse
I am having the same problems you describe. Anyone got an suggestions???
I encountered the same problem; first with an opel udp carkit and next with the bluetooth interface software from homeseer.
It has something to do with phone signal loss.
With the opel carkit I noticed bluetooth automatically turns off when the phonesignal switched from 3g to gsm.
I also noticed that in my home, BT turns off whenever I have been in a room with no phone-signal reception.
try this thread, both registry change and attached cab file, reset. DOn't worry if the make visible to all option is unchecked.
http://forum.xda-developers.com/archive/index.php/t-314996.html

BT160 pairing problem

Hi,
I have a Jabra BT160 bluetooth handset and somehow it does not show up when I see all the available bluetooth devices from HTC Fuze
Is there any specific settings that needs to be done?
Thanks

Tmobile G1 Bluetooth designed not to work

I have a Tmobile G1, I can use my bluetooth to connect with a bluetooth headset but cannot use the bluetooth to connect with another phone. I have contacted Tmobile and they said the phone was designed to only work with bluetooth headsets and NOT with othr phones.
Can anything be down-loaded or altered to allow bluetooth to work with other handsets?
Check the G1 Forum Section for a solution. Other users have probably had the same problem and someone should have come up with a solution by now

BT SAP on TD2 problem

Hello all,
I recently purchased the TD2 and I encounter a problem with its BT SAP functionality with my car (VW).
It connects and works ok, but when I turn the ignition off, remove the key and the phone disconnects from the car, it doesn't reconnect to the GSM provider again. I have to go to Settings/Communications and turn the phone off and then on again in order to reconnect.
Has anyone encountered a similar issue?
HTC support told me that it seems the car BT is not releasing the SIM card properly. The thing is that my old prophet with a cooked WM6.1 rom (don't remember which one right now), worked fine, without any similar problem.
Any ideas?
TIA.
PS. Ooops, sorry, think I posted on the wrong topic.

Categories

Resources