Hi,
I have a Jabra BT160 bluetooth handset and somehow it does not show up when I see all the available bluetooth devices from HTC Fuze
Is there any specific settings that needs to be done?
Thanks
Related
Hi,
I have a Nokia HDW2 bluetooth headset for the XDA2, it's pretty bad, keeps dropping off, not sure if their is a better bluetooth headset on the market or whether I need to upgrade the bluetooth stack on the XDA2, any advice please?
Reyser
reyser said:
Hi,
I have a Nokia HDW2 bluetooth headset for the XDA2, it's pretty bad, keeps dropping off, not sure if their is a better bluetooth headset on the market or whether I need to upgrade the bluetooth stack on the XDA2, any advice please?
Reyser
Click to expand...
Click to collapse
I believe Jabra 250/258 has the best connection insofar.
G2 seems to be good as well.
I understand Nokia BT does not use generic BT standards, and
Sony Ericsson Headsets are erratic.
Cheers.
Thanks Henry,
has anyone tried upgrading the bluetooth stack? Also in Singapore the XDA2 has a decent BT headset in their recent offer, what make is this?
lots of people have upgraded their bluetooth stack well not really upgraded because ms dont have any upgrades
but you can put the vidcomm bluetooth stack on it a lot of people in the forum have don that
You can find the Widcomm stuff here: http://forum.xda-developers.com/viewtopic.php?t=11729
do you have any instructions for Widcomm, tried to install but kept getting errors for all exe files
i need to connect 2 bluetooth devices to my polaris, one to use as a phone handsfree and the other as stereo speakers.......
no problem there you say, but, they will both be identical devices with the same device names. and both capable of both headset and wireless speaker profiles.
does anyone see any problems with this?
i have connected many different bluetoth devices at the same time but never 2 of the same device.
given the way the simplest things can go wrong i was hoping that someone here might have already done this and could tell me if it worked ok or was a disaster!
thanks
I don't think this is a problem for the pairing. I once used an identical PDA for a couple of weeks. I restored a backup of the old PDA on it, so it had the same name. I hoped it would be paired to all my BT devices, but it wasn't. I had to pair them all again. So I think there is more identification than only the name.
thanks that sounds good.
does anyone use both headset and wireless speakers over bluetooth?
i am hoping that the phone will go to the headset and all other audio (TomTom, Mp3) would go to the speakers....... has anyone had this working ok?
also does ayone have 2 of the same bluetooth device that they can assign different profiles to?
i am concerned that although i set 1 as headset and the other as speakers as they are the same device they may swap roles depending on which connects first
i dont know if this is an issue but if anyone is able to test this for me it would be a huge help
lol ok strike that! just found out from the manufacturer that although the dongle has the wireless stereo profile its only wired for mono!
so can anyone recomend a good Bluetooth stereo reciever
My touch pro seems to have real bluetooth issues with my JVC KD-NX5000 stereo system. My kaiser worked flawlessly with it but with the touch pro it wont pair at times and when it does it wont let me use any of the many functions that the stereo offers (voice dialing, downloaded phonebook, etc) I assume this is a problem with the ms bluetooth stack and was wondering how tough of a job it would be to switch to a broadcomm stack or if anyone has thought about making a custom rom with the broadcomm stack. Just curious if Im the only one with issues with wm 6.1 and bluetooth.
i have the same problem with my diamnd anbd jvc car audio
Slightly OT rant:-
I had the opposite problem with pioneer + broadcom...
Pioneer only looks for handsets which identify themselves as phone or smartphone, and my device identified itself as a pda.
I actually told pioneer about the problem, and rather than forwarding on to the developers, I got a stock reply:-
"This phone is not on our compatibility list" (so we don't care)
So I went and got an MS based phone (you can change it to smartphone with a regedit).
Never buying pioneer again...
- Anthony
Similiar issue with my opel carkit.
Tried to make the broadcom stack working, but got a memory error when opening its blue tooth manager.
After uninstalling, bluetooth didn't work at all anymore, needed to perform a hard reset.
Has anyone successfully installed the broadcom BT stack on the touchpro/raphael?
I found that my Touch Pro would pair and then drop out when connecting to my Kenwood DDX5032 car stereo bluetooth adaptor. I couldn't dial from the Kenwood kit, couldn't use A2DP (wouldn't even connect), and really couldn't use any Headset Profile functions at all.
I persisted with pairing and unpairing in different ways (you can initiate the pairing from the Kenwood itself rather than the phone), but nothing really worked.
Then trinode's post about changing a registry setting sent me down that track and now everything is working fine
I found the relevant setting from http://forum.xda-developers.com/showthread.php?t=290871, which is [HKLM\Software\Microsoft\Bluetooth\sys\COD], and then changed the HTC TP default value of '5898764' (decimal), to the value from my old Dopod838Pro, which was '5374228' (in decimal).
I didn't even need to repair the Kewood to the HTC TP - it just worked straight away, as if it said "Oh, sorry, did you want me to work? I thought you wanted me to be in 'stupid' mode! My bad - everything will work now."
So all good, and thanks to trinode for pointing me in the right direction.
Codenix.
After hard-resetting my Touch Pro to fix another separate issue, now this problem has come back and this time changing the COD value hasn't fixed it. It would appear my previous post may have attributed my success to the wrong thing
The search for the answer continues!
I found a firmware update for my Kenwood's bluetooth adaptor which fixed the problem. I don't know why it ever worked at all before this update, but there you go!
I'll create a separate thread to share this with others in case anyone else out there has a Kenwood bluetooth kit and a Touch Pro or a Diamond.
Thanks.
The thread I created re the Kenwood is at http://forum.xda-developers.com/showthread.php?p=2835805
@ Trinode
Pioneer sent my unit back, but never told me that my phone was not supported. Where did you flag the smartphone in the registry? Did it fix the BT connection/unti reboot issue? I had a AVIC F500BT (sold it) now have a AVIC X910BT same issue as the 500 had.
@ Trinode. I found the hack , tried it, but it still doesn't resolve my issue. Are there any other mods out there for the BT Stack prob?
Does anyone have problems connecting their Desire S to Bluetooth devices?
My phone seems to pair to my Bluetooth hands free kit but no connection actually happens. The same situation for another Bluetooth kit i have and also my laptop!
I just upgraded from a normal Desire and it worked perfectly with all the devices.
I tried changing the radio and also upgraded the Rom from 1.28.401.1_Radio_20.28b.30.080 5U_38.03.02.11
to
1.47.401.4_Radio_20.28I.30.085 AU_3805.06.02.03
I have searched for solutions but have not found any on XDA
Might be that your bluetooth device is in a black list need to check, can yo utell what bluetooth device you have exactly?
superkid said:
Might be that your bluetooth device is in a black list need to check, can yo utell what bluetooth device you have exactly?
Click to expand...
Click to collapse
My main Bluetooth device is a Merlin Car Mirror Kit V2.
When connected and properly paired it should 'beep' twice, but now it just connects and the phone says its paired. When you make a call it shows it is dialling but no sound comes through both ways.
Hi all,
I have got the One S now for some weeks and I'm really satisfied. But I got one problem using my handset handsfree via bluetooth. I can take an incoming call via clicking the BT headset, but I can do anything via clicking it when the device is in standby. Though I can react, but not act. I have got the experience from my old HTC Desire when I click on the BT headset, that the voice search starts or I got the possibility to choose an application.
I already called the HTC support, but they were not very nice and said, that they can only support HTC accessoires. But I can not believe that I want to use accessoires from third party manufacturers.
So where is the problem? Is it a HTC problem? Is it related to Android 4.0 or is it related to a few amount of compatible BT headsets?
Already tested with Sennheiser EZX 60 and Jabra EasyGo.
Thanks in advance.
Ok, let's keep it simple. To all One S users with a Bluetooth headset:
What happens if you push the button on your BT headset?