MotoBlur 0.2 for HTC Magic 32a
Extremely experimental, try at your own risk, no support offered at all.
This was taken from Drizzy's earlier BetaBeta that I had a play with a few days ago and decided I might as well release it - he's added dream fixes, but not much of it applies to us so far from what I can see so haven't bothered updating it. Thanks should go to Drizzy for his work on getting this to start with tho!
It was a quick repack I made just to have a play with it and see what it was like - so I've added little to it.
Update: 0.2 now with a BFS303 kernel
If something's broken, don't expect me to fix it - my knowledge of the internals of it all is pretty small, but if you know HOW to fix it, feel free to let me know and if its' worthwhile I may even package it again
What's not working:
Wireless
Bluetooth
Laggy initially when the MotoBlur setup is running, but it speeds up once it's finished syncing.
Enjoy!
Downloads
MotoBlur 0.1 for 32a FULL INSTALL from:
http://www.megaupload.com/?d=DBJIDJAU
MotoBlur 0.2 for 32a UPDATE only!
(ie. you still need to install 0.1 first, then apply this!):
http://www.megaupload.com/?d=TFW1LR3Y
Enjoy!
I might try it just for checking it out. But wont just jump the wagon now that you don't seem to dedicated to make updates for it
Anyway thanks for sharing!
Just flashed it and it boots fine
Too bad that it looks like i cant connect to motoblur's servers. I get an error which is something like "blur service seems to be busy" and i'm not able to register:\
can someone port it for 32A the rom made by Drizzy at the dream forum. He seems to able to fix many things. http://forum.xda-developers.com/showthread.php?t=557982
It's not that I dont' want a working rom - I'm just new to this and don't know how to fix all of it without a lot of trial and error
As for Drizzy drake - his one hasn't really fixed the main problems much either - which are wifi/bt and speed.
I really rushed with 0.1 - hadn't realised this wasn't cupcake and was donut and that gives me a bit more incentive to fix it.
I've started on a 0.2 release with a BFS 303 kernel, working modules, xbin and if I can, wifi working - will let you know if/when I am successful.
Let me know if you see any easy fixes in here - I'm still learning my way around a rom like this and would appreciate any help.
Cheers,
Radix999
Thanks a lot for posting the rom! You made my day!
I really see a big potential in the MotoBlur OS, it just need speed and wifi
Hope you can get it fixed
Sorry i'm a bit confused here, maybe i missundestand something but in your first post you write:
And I don't even remember which kernel I put in.. think it was a 2.6.27 one as this is cupcake not donut.
Click to expand...
Click to collapse
but in 2nd post:
Hadn't realised this wasn't cupcake and was donut and that gives me a bit more incentive to fix it.
Click to expand...
Click to collapse
Can you please clear out my confusion
Radix999 said:
MotoBlur 0.1 for HTC Magic 32a
Extremely experimental, try at your own risk, no support offered at all.
It was a quick repack I made just to have a play with it and see what it was like - so I've added little to it.
I forget where I got this from, and I don't even remember which kernel I put in.. think it was a 2.6.27 one as this is cupcake not donut. I was asked to upload this just so other ppl could play.
If something's broken, don't expect me to fix it, but if you know HOW to fix it, feel free to let me know and if its' worthwhile I may even package it again
Enjoy!
Download 0.1 from:
http://www.megaupload.com/?d=DBJIDJAU
Click to expand...
Click to collapse
I cant open this url. a mirror please?
This is an update to the above rom - just updates the kernel to 2.6.29-6-BFS303.
It improves the experience a bit, but it's still very sluggish and I've not been able to get wifi/bt working:
Just download the update.zip below and apply on top of an existing motoblur 0.1 install:
MotoBlur 0.2 for 32a update:
http://www.megaupload.com/?d=TFW1LR3Y
If anyone can help me
a) mount the sqf files correctly,
b) work out what's wrong with wlan and BT
I'd appreciate the help!
nubcake said:
Just flashed it and it boots fine
Too bad that it looks like i cant connect to motoblur's servers. I get an error which is something like "blur service seems to be busy" and i'm not able to register:\
Click to expand...
Click to collapse
like you
Radix999 said:
MotoBlur 0.2 for HTC Magic 32a
Extremely experimental, try at your own risk, no support offered at all.
It was a quick repack I made just to have a play with it and see what it was like - so I've added little to it.
Update: 0.2 now with a BFS303 kernel
If something's broken, don't expect me to fix it - my knowledge of the internals of it all is pretty small, but if you know HOW to fix it, feel free to let me know and if its' worthwhile I may even package it again
What's not working:
Wireless
Bluetooth
Laggy initially when the MotoBlur setup is running, but it speeds up once it's finished syncing.
Enjoy!
Downloads
MotoBlur 0.1 for 32a FULL INSTALL from:
http://www.megaupload.com/?d=DBJIDJAU
MotoBlur 0.2 for 32a UPDATE only!
(ie. you still need to install 0.1 first, then apply this!):
http://www.megaupload.com/?d=TFW1LR3Y
Enjoy!
Click to expand...
Click to collapse
Please 32b!!!!
I'm just wondering - would wifi work if I flashed MotoBlur 0.2 and then flashed the newest kernel for CM ?
neojonax said:
Please 32b!!!!
Click to expand...
Click to collapse
Take a look at the one over at the Dream forum - http://forum.xda-developers.com/showthread.php?t=557982
Briix said:
Take a look at the one over at the Dream forum - http://forum.xda-developers.com/showthread.php?t=557982
Click to expand...
Click to collapse
Ok,THANKS!!!!!
Briix said:
I'm just wondering - would wifi work if I flashed MotoBlur 0.2 and then flashed the newest kernel for CM ?
Click to expand...
Click to collapse
They should be the same except for the ramdisk really.. I used the same kernel I compiled for CM 4.1.999 w/ BFS303
I guess you could always try it and if no luck then flash my 0.2 update afterwards
Thanks it's working
Thanks, it's working on my magic. (v0.1) I like to see how Motorola made it. I really enjoy.
BTW, how can I switch it off?
It does not respond to red Power switch. I saw Motorola's android phone had fewer switches.
I will "adb sync" few times, and pull out the battery...
and I will apply v0.2 after download.
Damm, i tried to flash it again.
I still get the following error whenever i try to register a MOTOBLUR account:
"The Blur service has indicated it is busy".
May it be that they are blocking my region or my mobile operator blocking any connection to their servers? These are the only things i can think about
setupr said:
BTW, how can I switch it off?
It does not respond to red Power switch. I saw Motorola's android phone had fewer switches.
Click to expand...
Click to collapse
Haha.. yeah, I did that too - I discovered that you can also use adb shell and 'toolbox reboot' to turn the phone off.
The Cliq has no end call button, hence why it's not assigned to do anything.
nubcake said:
Damm, i tried to flash it again.
I still get the following error whenever i try to register a MOTOBLUR account:
"The Blur service has indicated it is busy".
May it be that they are blocking my region or my mobile operator blocking any connection to their servers? These are the only things i can think about
Click to expand...
Click to collapse
I managed to sign up a couple of days ago when I first created this rom - but I think too many people have signed up and their phones aren't even out yet so they've blocked new users from signing up or something - I dunno.
Radix999 said:
Haha.. yeah, I did that too - I discovered that you can also use adb shell and 'toolbox reboot' to turn the phone off.
The Cliq has no end call button, hence why it's not assigned to do anything.
Click to expand...
Click to collapse
Haha. I was checking the Dream forum - http://forum.xda-developers.com/showthread.php?t=557982 . They are same situation.
Someone was writing about [Home]+[Menu]+[Power] switches. Is this "Reset" or "Shutdown"? If it is "Reset", it is same like "pull out the battery"....
Also, does "toolbox reboot" shutdown system properly? at least, I expect it does sync file system.
I did in adb shell "toolbox reboot", while pressing [Home] switch. It did not reboot but switched off.
How to switch off with Motorola Cliq ? There must be a proper way of shutting down the system.
Radix999 said:
I managed to sign up a couple of days ago when I first created this rom - but I think too many people have signed up and their phones aren't even out yet so they've blocked new users from signing up or something - I dunno.
Click to expand...
Click to collapse
In the Dream forum, there was a post http://forum.xda-developers.com/showthread.php?p=4677405#post4677405
jaygajay said:
> Is't it possible to jump over Blur account to Homescreen?
You have to delete Setup.apk
If you have adb installed on ur computer plug in your phone and do
Code:
adb root
adb remount
adb shell rm -r /data/app_s/Setup.apk
adb shell reboot
Click to expand...
Click to collapse
The end button issue I think has been resolved by Twisted over the dream forum as mentioned by Drake in Moto v0.5 change log, Can someone install that fix and confirm.
Related
if you want a certain script added, chances are some1 else does too. if you have an idea, or find a script you want added, please either post or PM me. i take a look at this thread alot throughout the day, so i will be able to see your ideas quickly. YOUR IDEAS ARE IMPORTANT
first of all, i did not write this script, i took it from the thread HTC Hero Speedup v2.0 (http://forum.xda-developers.com/showthread.php?t=521421), which was put together by tehseano, who i must thank, however, it seems to only work for Haykuro's Hero ROM
THIS SCRIPT is made to speedup the HTC HERO rom on the g1's. my speedup script is made to work under JACman's. if tried on someone elses, you could brick your phone (although i doubt it), and i will not take responcibility for bricks
trying to use it under JACman 1.72, i couldn't get tehseano's script to work, so im going through a bunch of tweaking and editing for it to work under JACman roms (im guessing twistedumbrella's too).
currently, i'm about to release version 0.2. - released
i have fixed most of the directories and codes except for Battery fix, i have gotten the HTC camera to work, read the readme file
out of curiosity, does any1 have any preference on where i upload the files? want someplace easy and fast, so no rapidshare or anything like that. first working suggestion gets it
please do not use option #8 once it is up, it is not done yet
everything else should be good. this is made STRICTLY for JACman roms, not haykuro's, but twistedumbrella's should work, since it is based off of JACmans
____________________________________________________________________________________________
version 0.2 - http://www.4shared.com/file/113524687/c98398cd/AJZ_HeroSpeed_02.html
very minor changes
fixed the scripts
working on a battery fix
version 1.0 will be more compatible with JAChero 1.8, i expect to release that in the next few day, but this might not be possible because i'm going on vacation
_____________________________________________________________________
I ACCIDENTLY UPLOADED THE BAT AS A TXT FILE. im not gunna change it, so until the next release, just rename the file as a bat
0.1.5: http://www.4shared.com/file/113343120/6c89dd65/AJZ_HeroSpeed_015.html
i must thank dpgc213 for creating the original lockscreen change bat file
Changes:
deleted option to delete pc sync, causes bootloops and doesnt exist
added possibility to change the screen lock image (although doesnt have to do with speed)
added quick directions for changing the lock screen image
____________________________________________________________________________________________
version 0.1 - http://rapidshare.com/files/247165073/hero_speedup_2.0_AJZ_0.1.zip
here's a mirror of 0.1 http://www.4shared.com/file/113320662/7e513586/hero_speedup_20_AJZ_01.html
in version 0.2, expect to see support for the deletion of htc sync, and support for changing your lock screen
can you please include instructions for mac users? thanks good work
did you get it to work with JACman 1.72, you said you would try to tweak it, but did not say if you were successful?
I dont know how to apply the script cuz its made for windows, If some1 put instructions plz?
Franklees said:
did you get it to work with JACman 1.72, you said you would try to tweak it, but did not say if you were successful?
Click to expand...
Click to collapse
i got all the commands and everything working in 1.72 except for #2 to work. #2 will cause a boot loop.
#2 just deletes your htc sync, which idk what it does anyways.
in 0.2, i will try to fix this, as well as add support to change your lock screen
i got the change lockscreen part in, now just gatta see the problem with htc sync
juangil said:
I dont know how to apply the script cuz its made for windows, If some1 put instructions plz?
Click to expand...
Click to collapse
u could try renaming it to something that will work in leopard (er tiger). idk if that would work, im not a mac user. ubuntu and windows
alexjzim said:
u could try renaming it to something that will work in leopard (er tiger). idk if that would work, im not a mac user. ubuntu and windows
Click to expand...
Click to collapse
so if put the optimize.sh file in my sd how do I run it? or is the .bat file the ones that needs to be run? thx
juangil said:
I dont know how to apply the script cuz its made for windows, If some1 put instructions plz?
Click to expand...
Click to collapse
it cant be used for mac users, but basically a bat file just has a bunch of adb commands in it. i can post them for you if you like.
wwwhershcom said:
it cant be used for mac users, but basically a bat file just has a bunch of adb commands in it. i can post them for you if you like.
Click to expand...
Click to collapse
great! that will do it, I appreciate your help
anyone know if HTC pc sync is included in 1.72? if it is, anyone know where it is? once i find this out i can release 0.2.
Wow, this script really made a difference
Henchman said:
Wow, this script really made a difference
Click to expand...
Click to collapse
was aiming for that
juangil said:
can you please include instructions for mac users? thanks good work
Click to expand...
Click to collapse
...Buy a PC lol.
alexjzim said:
was aiming for that
Click to expand...
Click to collapse
When I ran option 3, 6 and 5 in that order without a reboot and then reboot after I did all those I got a bootloop, when I did #5 it was saying success on each one. If I installed dextop-wrapper awhile back like weeks ago do I have to install it again because I didn't install it. I figured I still had it.
jigdagod said:
When I ran option 3, 6 and 5 in that order without a reboot and then reboot after I did all those I got a bootloop, when I did #5 it was saying success on each one. If I installed dextop-wrapper awhile back like weeks ago do I have to install it again because I didn't install it. I figured I still had it.
Click to expand...
Click to collapse
my only suggestion is to wipe and reinstall your ROM, then do everything in order. i cant tell you exactly, because i cant actually see your phone
Okay, thanks I'll try that tomorrow when I get home.
Does this support 1.72 yet?
71CH said:
Does this support 1.72 yet?
Click to expand...
Click to collapse
first of all, i did not write this script, i took it from the thread HTC Hero Speedup v2.0 (http://forum.xda-developers.com/showthread.php?t=521421), which was put together by tehseano, who i must thank, however, it seems to only work for Haykuro's Hero ROM
THIS SCRIPT is made to speedup the HTC HERO rom on the g1's. my speedup script is made to work under JACman's. if tried on someone elses, you could brick your phone (although i doubt it), and i will not take responcibility for bricks
trying to use it under JACman 1.72, i couldn't get tehseano's script to work, so im going through a bunch of tweaking and editing for it to work under JACman roms (im guessing twistedumbrella's too).
currently, i'm about to release version 0.1. - released
i have fixed most of the directories and codes except for uninstalling HTC sync, and replacing the sapphire camera with the official HTC camera. i have gotten the HTC camera to work before, and just need to add in the right codes
out of curiosity, does any1 have any preference on where i upload the files? want someplace easy and fast, so no rapidshare or anything like that. first working suggestion gets it
please do not use option #2 once it is up, it will cause your phone to boot loop - option #2 is now used to change the lockscreen and is completely usable now
everything else should be good. this is made STRICTLY for JACman roms, not haykuro's, but twistedumbrella's should work, since it is based off of JACmans
PC sync is out of all JAChero builds... i spent hours trying to fix something not there . because of this, the next release will be 0.1.5 instead of 0.2
I ACCIDENTLY UPLOADED THE BAT AS A TXT FILE. im not gunna change it, so until the next release, just rename the file as a bat
0.1.5: http://www.4shared.com/file/11334312...Speed_015.html
i must thank dpgc213 for creating the original lockscreen change bat file
Changes:
deleted option to delete pc sync, causes bootloops and doesnt exist
added possibility to change the screen lock image (although doesnt have to do with speed)
added quick directions for changing the lock screen image
__________________________________________________ __________________________________________
71CH said:
Does this support 1.72 yet?
Click to expand...
Click to collapse
Yes.
That's what I'm using ti with. And it's made Rosie completely usable for the first time for me.
Has anyone had the experience where Rosie was really fast when first optimizing using whatever procedure but then lags down over time? That was what I experienced when using a different optimizer. Hopefully this one is consistent.
If my title really needs a slogan to get your attention, then I just didn't make a big enough impression last time
Donations accepted / appreciated. All proceeds will go toward the cost of the myTouch and future accessories for development.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8141983
How I rooted a brand new "perfected SPL" MT3G and installed Hero in 15 min:
http://forum.xda-developers.com/showpost.php?p=4471578&postcount=154
Most Recent:
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroSx-6.21s.zip
MD5: a04acee7df4e859bd2012954e1ec5447
Motorolla Blur: http://twistedumbrella.slackdev.com/MotoBlur-1.2.zip
This is an untested update, works in theory...
Sapphire Fixes: http://twistedumbrella.slackdev.com/Deport-1.1.zip
Removed Apps: http://twistedumbrella.slackdev.com/Extended.zip
Extended Apps: http://twistedumbrella.slackdev.com/Incremental.zip
Back your apps up as an update in case you do a wipe using this:
Download Incremental.zip above. Back all the apps up you want.
Open the archive and replace the apps in the data/app directory.
Sign the archive like a regular update and place in root of SD card.
Flash the update you want. When finished, flash Incremental.zip
Reboot the phone and both the update and apps will be installed.
User.conf file can be found as system/bin/hero.conf on any device.
No command needed for device identification. Faster boot (hopefully).
A reboot is no longer needed to use either device. This is all integrated.
Recommended not to overclock below 256, due to the black screen issue.
Compcache is enabled by default, current values were EXTENSIVELY tested.
Please do not contact me asking what values work or giving me others.
I spent 2 weeks changing values, testing, changing, testing. Both devices.
Abreviated Changelog, Full Changelog linked below:
Optimized the entire system app folder using the automated method.
Changed some animations. A lot of new stuff in use from Cyanogen.
This is a very unthemed build. The lock screen and such are generic.
The boot animation is customized and will not port to other builds.
http://forum.xda-developers.com/showpost.php?p=4758619&postcount=960
So much to do so little time, I do feel like the "white rabbit"
Now includes dynamic swap. Rewrote the method of apps to sd for myTouch.
Build will move system apps, user apps, and dalvik to sd on a g1 device.
Build will install completely internal if using the T-Mobile myTouch.
This is a completely new method of doing a merge build so bear with me.
Based on the System Image from Haykuro
Using the Kernel and modules from JacSki
Try rm system/sd/app_s if you feel new apps are not installing.
http://twistedumbrella.googlepages.com/index.htm
All the necessary files can be found there, including my GScripts.
This is also where all the download links to NEW versions are posted
Housekeeping:
Back everything up. This means run some sort of data backup if you want to keep your settings
You may also want to run a nandroid backup in recovery (if all else fails, you can restore it)
Warnings:
You MUST have the newest SPL
You MUST have a Class 6 SD Card
You MUST know how to read
You MUST have 3 partitions
You MUST have at least 256MB EXT
You MUST have Recovery1.4 or above
G1 / MT3G: http://twistedumbrella.slackdev.com/Zero9x-6.18b.zip
MD5: e253ffd6d19aa04e7a75d0ede4a487e1
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-6.14r3.zip
MD5: Currently Unknown
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-6.13.zip
MD5: e908408b424835cea75f4f539514fccd
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-6.12.zip
MD5: 321f92f4e1219979674c5ec85ac1b811
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-6.11.zip
MD5: 28c474b6ac9d636e5d02f0c18fa3dd13
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-6.10.zip
MD5: b24c387ec7483acf04f12589aecd09c0
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-5.2r5.zip
MD5: Currently Unknown
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-5.2r2.zip
MD5: b8165fe91d777b010db054cbfeb433ae
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-5.1r2.zip
MD5: 0d10525b55ed6c97b7741a70aa113cdb
http://twistedumbrella.slackdev.com/ZeroXd-5.0r2.zip
MD5: 82a72392e78044ed165448949b9ddfbb
http://twistedumbrella.slackdev.com/ZeroXd-4.5r6.zip
MD5: f1e119e936fb4749f642a69780b4a1c9
http://twistedumbrella.slackdev.com/Resources.zip
Despite what you may have heard, I use SetCPU also.
you can have this spot back hehe
palosjr said:
any screenies coming soon?
Click to expand...
Click to collapse
I posted the thread 30 seconds ago... I just hit upload... Sheesh... didn't even have time to get the third slot for the second rom...
mean cant wait for your casper. also is the led lights like jacs 1.4, like how dere dim, and the lights wont show up on charge?
hiroots said:
mean cant wait for your casper. also is the led lights like jacs 1.4, like how dere dim, and the lights wont show up on charge?
Click to expand...
Click to collapse
Yeah, about that... Wonder where he got the idea to piggyback that script into the boot.img userinit? Do you know? I might... Check ZeroXd...
wow he got it from u or stole it? and published it first?
twistedumbrella said:
Yeah, about that... Wonder where he got the idea to piggyback that script into the boot.img userinit? Do you know? I might... Check ZeroXd...
Click to expand...
Click to collapse
not too many ppl very fond of the new things this JAC's build and the way he is acting about them... tsk tsk... all i can say lol
ummm i think the download links are broken... EDIT- nvm just saw uploading in progress lol
hiroots said:
wow he got it from u or stole it? and published it first?
Click to expand...
Click to collapse
He most likely got the idea on his own. I just think since ZeroXd didn't get any real response he didn't notice it had LED support about a week before the 1.3 refresh was even posted. Ask the kids on twitter about back when I came up with the looney idea and how it killed auto-rotate. I threw in an old version of the codes before someone asked if I had seen the thread. I was still using ones ported from my GScript from months ago. Haha, whatever makes a better build. I'm glad to see both Drizzy and JAC getting SOME use out of something I had a part in. Hell, Shafty figured out the commands, I just got lucky figuring out where to place them.
wow, this is kinda when jac and drizzy was working together and it seemed like jac took all the credit in the built. well thats good we still got devs that supprt each other and not use ones idea and run away with it.
I love this black is a nice color! good **** twisted!
Drizzy Drake Rogers said:
I love this black is a nice color! good **** twisted!
Click to expand...
Click to collapse
Thanks man. I was telling you before, all about the INVERT. Haha. Make it all black, hit invert, all white. Kinda had to go a bit grey though for visibility. I would have left Champion the way it is but I couldn't help it when I figured out that boot animation trick. Anyway, both downloads are live.
Im running it, it seems to run very nice its real smooth think this might be my main rom, Nice work mate.
Sorry to be the first one to post that I cant get past the Hero boot. I wiped, then "rm" my ext4, then wiped again, then applied rom, 3 times now. but all get stick in hero boot. btw its the casper one.
futango said:
Sorry to be the first one to post that I cant get past the Hero boot. I wiped, then "rm" my ext4, then wiped again, then applied rom, 3 times now. but all get stick in hero boot. btw its the casper one.
Click to expand...
Click to collapse
you still need a third partition...
palosjr said:
you still need a third partition...
Click to expand...
Click to collapse
Got 3, 7.2GB Fat32, 400MB Ext4, 32MB Linux Swap
Thanks Twisted, the boot screen is a work of art!
futango said:
Got 3, 7.2GB Fat32, 400MB Ext4, 32MB Linux Swap
Click to expand...
Click to collapse
are you sure? if you did rm to ext4, you removed the partition... did you go into gparted and do print
palosjr said:
are you sure? if you did rm to ext4, you removed the partition... did you go into gparted and do print
Click to expand...
Click to collapse
my bad for not being clear. I did.
mount -o rw /dev/block/mmcblk0p2 /system/sd
rm -rf /system/sd/*
to clear the ext4 from recovery console.
!!THIS NAVIGATION IS !!ONLY!! FOR THE USA!!
!!Paid apps work!!
Facebook has now been removed!!
Release Name:update_navigation.zip
Release Version:FINAL
MD5 Sum:N/A (verified working)
Credits:See below
Base Firmware:1.6
Radio Required:N/A
SPL Required:N/A
Partition Layout:N/A
Wipe Required:N
Special instructions:See below
Download:See attachment or, 4shared link
Hey guys,
After a longs day of work, I got it.
Put together a recovery flash-able zip file to add the new Google navigation.
REQS:
1. Dream or Sapphire/Magic/Mt3G
2. 1.6 Rom as a minimum
3. Custom recovery either Amon's or Cyanogen's
4. A brain
5. The download at the end of the post
STEPS:
1. Download this for most Donut builds (Cyanogen based). (also attached now )
2. Place in the root of your sdcard
3. Reboot in recovery
3. Select chose update.zip (or rename the downloaded file to update.zip)
4. Select update_navigation.zip
5. Reboot
Extended steps:
If "Navigate" doesn't show up the first time:
1. Go to settings
2. Click on applications
3. Click on Manage applications
4. scroll to apps
5. click on Maps
6. Clear data
OR
1. Install Google Voice
2. Uninstall Google Voice
3. Reinstall Google Voice
****MOST IMPORTANT PART****
Thanks:
Cyanogen and Amon for their recovery images.
followinginsanity for his updates to build props
community for helping test and get it goooinnggggg!!
clyde8 for the better build string
Brut.al for the (possible) navigation out of USA!
Donation shout-outs:
Suma Software Inc
If you actually feel like donating to my trip fund go ahead and click here!!
!THANKS!
AND ENJOY
Q&A
Q: Navigation is not showing up!
A: you must first "get directions" for the option to show up, it is in that pane
A: MAKE SURE YOU ENABLE GPS!!!
Q: Why was facebook removed??
A: it caused to many issues, and the market one works fine.
Q: What is the latest changes??
A: I removed the build.prop file completely in hopes that it will work without it, did for me... you tell me
Q: What took so long?!?!
A: I had H1N1, b|0W me.
Q: Does this work with AOSP?
A: doesn't look like it, at least not so far, I did adjust some build props right from them but never got any feedback to let it out to the masses.
Q: Does this break CM-Updater?
A: No, it shouldn't.
Q: Do i need to reflash this every time?
A: if you want navigation, yes. Every update reverts the build props back to the old ones.
Q: Does this work outside of the USA?
A: Yes. BUT BUT BUT BUT BUT BUT BUT BUT BUT YOU MUST FOLLOW THESE DIRECTIONS EXACTLY!
1. First navigate between 2 USA addresses (just enter them in to get the navigate option to show up)
2. Make a shortcut on your home screen with the address you want to navigate to.
3. Make sure turn by turn is checked.
4 click it nub.
5. drive to the location
6. brag "o mai android is wai b3tt3r thian UR ip0ne."
7. hope to god it brings you back home, otherwise buy a map.
If your paid apps are not working, either wait until midnight, for caches to clear, or flash from scratch...
IE: recovery - rooted cyano - Cyano update - navi update
(p.s not responsible if you drive over a bridge following the GPS, that's stupidity)
(p.p.s don't brick your shaz and blame me or anyone else for that matter, you blew it)
Im trying it now will get back to you
nick8197 said:
Im trying it now will get back to you
Click to expand...
Click to collapse
just for s&g are you a dream, and what Cyanogen are you running...
just want to get as much info as possible
Im on a dream/g1
Im using dwang with theme
do you think it will work I havent done it yet
will test as soon as my slow internet loads
how exactly does this one work? meaning what exactly does it change? does it still affect the build.prop and build.trout.prop, or will it work on its on?
nick8197 said:
Im on a dream/g1
Im using dwang with theme
do you think it will work I havent done it yet
Click to expand...
Click to collapse
i do believe so...
the only way it won't is if i mis-edited the build.trout.prop
but we'll know in a bit!!
alexjzim said:
will test as soon as my slow internet loads
how exactly does this one work? meaning what exactly does it change? does it still affect the build.prop and build.trout.prop, or will it work on its on?
Click to expand...
Click to collapse
unfortunatley yes, it still edits the buildprops and what not....
it should work on anything 1.6+ by anyone.....
i think
theomajigga said:
unfortunatley yes, it still edits the buildprops and what not....
it should work on anything 1.6+ by anyone.....
i think
Click to expand...
Click to collapse
i tried one...not this one.. but what happen is that handcent dosent locate contacts.. due to those builds being moved..and handcent is a popular sms app so im waiting for someone to flash this then run handcent!
mrnv45 said:
i tried one...not this one.. but what happen is that handcent dosent locate contacts.. due to those builds being moved..and handcent is a popular sms app so im waiting for someone to flash this then run handcent!
Click to expand...
Click to collapse
I'm going to look into that becuase i use handcent also...
this is just for the community, and me once i get that build stuf figured out...
just downloaded and am about to try it now. Nav was running great till i updated to 4.2.4. figure it reinstalled the build.prop. give me a sec and will let you know
theomajigga said:
unfortunatley yes, it still edits the buildprops and what not....
it should work on anything 1.6+ by anyone.....
i think
Click to expand...
Click to collapse
alright. i just wanted to see if we could have gotten that nice looking facebook app working alongside this. got a couple ideas.., give it a try when im done with my honors stuff. pretty behind. staying on XDA all night
mrnv45 said:
i tried one...not this one.. but what happen is that handcent dosent locate contacts.. due to those builds being moved..and handcent is a popular sms app so im waiting for someone to flash this then run handcent!
Click to expand...
Click to collapse
I had the exact same problem, I just pushed the old build.prop and build.trout.prop back to my phone and reboot and now handcent shows the right info and navigate is still there. Here's to hoping it stays!
waygeekierthanu said:
I had the exact same problem, I just pushed the old build.prop and build.trout.prop back to my phone and reboot and now handcent shows the right info and navigate is still there. Here's to hoping it stays!
Click to expand...
Click to collapse
rumor has it that nav will disappear though with the old buildprops back on...
P.S @ 50 download i'm cutting it off, want to make sure its working properly,
after some feedback i'll put it back up!
theomajigga
any lucc on the handcent?
Soo by putting this on my phone, will it mess up my handcent?
mrnv45 said:
theomajigga
any lucc on the handcent?
Click to expand...
Click to collapse
working on it now
alright i see the prob i think. as far as build props anyway. the only thing that needs to be changed is this line
ro.build.fingerprint=verizon/voles/sholes/sholes:2.0/ESD20/17572:user/ota-rel-keys,release-keys
the rest can stay the same.
this should play nice with other apps, and allow the new facebook as well.
edit: in this line would need to be modded in build.trout.prop for the dream and build.sapphire.prop for the sapphire
also note that you can mod the line in both and leave them in the update. cyan's roms use all 3 build props. but reads from the trout or sapphire depending on which phone it is installed on, since his roms can work on both.
working great on my wifes G1
followinginsanity said:
alright i see the prob i think. as far as build props anyway. the only thing that needs to be changed is this line
ro.build.fingerprint=verizon/voles/sholes/sholes:2.0/ESD20/17572:user/ota-rel-keys,release-keys
the rest can stay the same.
this should play nice with other apps, and allow the new facebook as well.
Click to expand...
Click to collapse
Made the change to the file. waiting for my test...
theomajigga said:
Made the change to the file. waiting for my test...
Click to expand...
Click to collapse
as soon as i get a confirmation that running this keeps handcent up lol you will become god lol..
Android 2.0.1-r5v0.6
Dead:
==============
After spending some time and looking over this rom and ways to make it work with out any legal issues. The most viable option was to build something like what cynanogen has built. His process takes the proprietary bits (all google apps including sync) and copies them off onto the SD card before doing a update. After the update it copies them back to the newly installed rom. This method basically does a automated backup/restore of your licensed applications. I can't do this for several reasons including that we are supposed to be coming from a 1.5 OS to a 2.0.1, which isn't compatible with the older application set.
Temporarily Offline:
==============
I am sorry to have to do this but we are now having more then just a small handful goofing with this ROM and I need to take this offline while I inspect each of the parts and make sure all licensing is in order since its a bit more then the google Opensource framework. I know that several other ROM creators have not paid much attention to it as I am going to now but I really don't want to upset any IP holders like what happened to Cynanogen a couple months back.
I will put it back up but I want to make sure that I am totally covered and don't have any issues.
version 0.6: download (offline)
==============
-fixed wifi thanks to http://forum.xda-developers.com/showthread.php?t=593620
-Now starts up with Android stock keyboard. (No longer needs HTC_IME.apk for second keyboard)
A few have asked for this ROM so I thought I would put it up here for anyone that wants to contribute to or take from it.
This ROM is only compatible with the Sprint CDMA HTC Hero. It is not finished and still requires some work but its good enough for my day to day use and I am sure others may find the same potential.
This ROM is vanilla android and what it takes to actually get it running on a CDMA phone. It is built off of this GSM variant. I am going to try and work to remove the google bits so that you can use Cynanogens method of extracting your own and then doing a follow up update to install them. My efforts for this is not to build a better rom but to build a cleaner base that has limited to no proprietary IP.
Credits to all on this forum how have helped or contributed in any way to building the roms that are here. I would point out names but there are to many to name. I am positive that anyone that pays attention to this forum will know who you are. I used many parts of these ROM's and many others on XDA to build this one.
This is my first ROM and was primarily made for myself to help me learn how to create a custom ROM.
Here is the link to my blog where I originally posted about this and a video of it booting.
Here is the Youtube video of it booting: http://www.youtube.com/watch?v=tRTh-rXKe-E
*Warning*: Don't attempt to flash this ROM onto anything else unless you know what you are doing! I am not responsible for any device malfunctions or "Bricks".
Notes on Installing:
- Run a Nandroid backup before you do anything.
- Make sure you do a full wipe first. (Sorry )
- Run the update zip found * Version 0.6 *(offline) from the recovery console.
To get the HTC keyboard installed: (Now Optional as of Version 0.6)
- Follow the instructions here.
Things that don't work:
- Gallery some times has issues.
- Camera
- Wired or Wireless Tethering (Now Testing)
- Orientation
- Trackball light
- Trackball click (Rolling and moving are fine)
- (Let me know if something else needs to go here.)
Possible issues that are not repeatable:
- speaker not working on out bound calls? I made 30 test calls to my home phone and was not able to replicate this issue. Needs to be verified (see here)
Awesome! Thanks! disregard my PM lol.. Great timing.
VoXHTC said:
Awesome! Thanks! disregard my PM lol.. Great timing.
Click to expand...
Click to collapse
LOL I was just getting to replying to you!
im trying it now nice work
Let me know if any of you have issues flashing. I still have it all right here in front of me if I need to make a change.
FYI: The first boot takes for ever as it registers all the APKS.
i just get the HTC_IME fource close i installed the one from the site like you said and installed it and i get this
thorracing1 said:
i just get the HTC_IME fource close i installed the one from the site like you said and installed it and i get this
Click to expand...
Click to collapse
So you installed both the HTC_IME.apk and the Clicker.apk? Did you do a adb push or a adb install?
Try and go into settings --> Language & Keyboard --> Touch Input --> Text Input?
I think its a force of habit with out really thinking to go there and calibrate but just going there may help.
Try that and let me know.
i just flashed it and pushed the keyboard and calibration app through adb and all is well. its working awesome. Thanks!!!
2.0t03speed said:
i just flashed it and pushed the keyboard and calibration app through adb and all is well. its working awesome. Thanks!!!
Click to expand...
Click to collapse
Awesome, keep the feed back coming as you have it!
please take note orientation doesnt work. please put in first post.
otherwise, great work!
should i do adb install or adb push?
blankd3ckskat3r said:
please take note orientation doesnt work. please put in first post.
otherwise, great work!
Click to expand...
Click to collapse
Got it listed now, that one bugs me... Must have been to worried about building this to remember it.
BTW thanks for the feed back!
thorracing1 said:
should i do adb install or adb push?
Click to expand...
Click to collapse
I would do an install or transfer them to your SD card and grab a app like Astro from the market to install them. Don't worry we will get you worked out.
dchadwick said:
Got it listed now, that one bugs me... Must have been to worried about building this to remember it.
Click to expand...
Click to collapse
lol well its a common problem, cant wait for a fix. really like what you did with this build
dchadwick said:
I would do an install or transfer them to your SD card and grab a app like Astro from the market to install them. Don't worry we will get you worked out.
Click to expand...
Click to collapse
Not able to get a working Keyboard Now I'm stuck in a boot loop. Tried installing through droid explorer.. no go.. tried installing from astro ..no go.. now it loads lockscreen.. dead... reboot..rinse and repeat
removed SDcard.. boots now trying to push.. but where do I push the apk files to?
blankd3ckskat3r said:
lol well its a common problem, cant wait for a fix. really like what you did with this build
Click to expand...
Click to collapse
Thanks, but I really can't take to much credit. Its a "Pick and Pull" from several ROMs. This one actually came from our GSM Brothers and then I used the CDMA tricks in this form to make it work.
I keep watching and playing with the Google Nexus Dumps. I would really like to get one of them up and running.
Based on your posting and replies I assume you are re-using the 2.6.27 kernel like the other roms?
VoXHTC said:
Not able to get a working Keyboard Now I'm stuck in a boot loop. Tried installing through droid explorer.. no go.. tried installing from astro ..no go.. now it loads lockscreen.. dead... reboot..rinse and repeat
Click to expand...
Click to collapse
Wow thats allot in a little space.
What I gather is that it originally booted, then after trying to install via droid explorer and then astro it now just dies after the lockscreen.
I am not sure where to start. I would just say to do a full wipe, then a clean install. Then if you have the sdk try the ADB install method as Cynanogen's post talks about.
I am working on trying to get the stock Android keyboard to work. If we can figure out that then we don't have to mess with the HTC one.
ok i got it i just adb pushed them to system/app works great
obelisk79 said:
Based on your posting and replies I assume you are re-using the 2.6.27 kernel like the other roms?
Click to expand...
Click to collapse
Yeah, actually some of your work if I remember correctly, thats why its got the same issues. My first goal when I built this for my self was to get past the blasted google bits sync loop. The more I worked into it the more I moved on to the 2.0.1 build with some of your stuff in it.
Your welcome to anything I have learned, its really not my work.
Hello, since there seems to be some confusion I decided to start this thread for the 32A port.
The G1 / Magic 32B thread is here: http://forum.xda-developers.com/showthread.php?t=776922
Note that all the work on PSFreedom was done by KaKaRoTo, and he was helped by DrMon in the MSM72K port, i merely compiled their work and put it in a simple package for everyone to enjoy.
I created 2 packages, an enabler and a disabler, that you have to flash over your working CM 6.0 Final installation.
Flashing the enabler will install the modded kernel and PSFreedom module. You will lose usb functionality completely (no adb, no mass storage etc.) until you flash the disabler.
After flashing the enabler the module will always start upon boot, you have to enter no commands on the terminal emulator.
[SIZE=+2]HOW TO:[/SIZE]
Preliminary: Make sure you are on CyanogenMod 6.0 Final and everything is working correctly. It has been reported that it works also with older CM6 versions and CM5 too, you may try if it works and report it in this thread. If it's the first time, do a Nandroid backup before testing!
Download these files: http://www.multiupload.com/MY1LOGZ6YP (32A-Enabler), www.megaupload.com/?d=3UU2L0UX (32A-Disabler)
Put them on your SD card
Reboot into recovery and Flash Enable_PSFreedom_32A.zip
Reboot
Now psfreedom should be loaded as a module, you will see no difference, except for the loss of normal usb functions.
To run the exploit:
Make sure you are on 3.41 (DO NOT UPDATE OVER THE NETWORK!)
Connect the phone to the PS3 using usb
Turn it off completely (unplug power cable or turn off back switch on Fat models)
Plug it back in (turn on back switch)
Turn it on and immediately press the eject button (you should hear 3 quick beeps)
Booting should take a bit longer (5-10 seconds)
If you see two new options under the games tab, the exploit worked. You can now unplug the phone. Mind that you will have to do this procedure every time you boot your PS3. Try using another USB cable if it doesn't work with a few tries.
To uninstall:
Boot back into recovery
Flash Disable_PSFreedom_G1.zip
Reboot
You should have usb functions back to normal.
Payloads:
This version of PSFreedom contains the new PSGroove 1.1 payload (peek & poke)and is enabled for backups, but backup manager talk should not be done on this thread, there are other boards for that.
If you want to try other payloads (F.I. the new AerialX's apploader), you just have to load it into /proc/psfreedom/payload . You can do it by typing:
Code:
cat payload > /proc/psfreedom/payload
The payload can be wherever you want and has to be in the classic binary format. (just remember to substitute "payload" with the correct path).
Even better, if you put the new payload in the /data/local directory, named "payload" (no quotes), it will be automatically loaded upon startup, thus becoming the default payload.
Mirrors:
Code:
Enabler: http://depositfiles.com/en/files/o1qpcbkeo
http://www.zshare.net/download/80630364707ab8fe/
http://rapidshare.com/files/420315547/Enable_PSFreedom_32A_v3.zip
Disabler: http://www.zshare.net/download/801637791c6185b2/
Versions:
Code:
v0: initial release
v1: +module loaded on startup
+created disabler
v2: updated payload (peek & poke)
v3: resolved bootloop bug, updated PSFreedom, dynamic payload loading.
reserved (10 characters long)
Thanks for yours work!
What about an application to enable/disable psfreedom? Will it be possible in the future?
My Magic (32A) does just reboot over and over after flashing the enabler.......also after flashing the disabler........so now restoring (i ALWAYS back-up befor flashing anything!)
But thanks for trying!
radio version for cm6
one question, CM6 can be for New Radio, or just Old radio?
H3llSp4wN said:
one question, CM6 can be for New Radio, or just Old radio?
Click to expand...
Click to collapse
there's a port also for new radio showthread.php?t=723520
But there are some issues (like broken camera)
Old Radio, new radio requires a different kernel.
For the app, for now psfreedom requires a modded kernel, and it is not possible to switch them on the fly using an app. I know they're working on using a different driver, to avoid having to recompile the kernel. Still don't know if it can be done though.
Can anyone provide a mirror please?
cm6
i'm just a bit confused about what cm6 rom should be better and should i use, because there are severeal releases (minimou, redux etc).
can u give me a tip about this?
best regards
I always use the vanilla one, straight from the cyanogenMod forums. I think it should work with any of those versions though. Just make sure you're on old radio and you make a nandroid backup before trying.
got everything right now.
thanks for the mirror.
Got a question? Does the mt3gs use the msm72k also and why is it not on the port list? Sorry I'm probably in the wrong area but thought I would try
Hi , just have a question , looked arround with google , couldn't find my answer, maybe someone here knows,
Before trying this out, I would like to know if I can revert my ps3 to original state,
or to how it was before running psgroove?
yes as the exploit must be ran on every boot so simply reboot and delete bxxm
H3llSp4wN said:
i'm just a bit confused about what cm6 rom should be better and should i use, because there are severeal releases (minimou, redux etc).
can u give me a tip about this?
best regards
Click to expand...
Click to collapse
i use redux and it works for me (i still use the release that u have to do thru the terminal)
focus400hp said:
Got a question? Does the mt3gs use the msm72k also and why is it not on the port list? Sorry I'm probably in the wrong area but thought I would try
Click to expand...
Click to collapse
MT3G is 32B, so head off to the Dream section and get that one instead.
with cm6 my g1 go in loop... why?
Hey guys, I'm running into a little trouble after installing the PSFreedom enabler. My htc magic 32a (3.5mm jacket) just sits on the "HTC Magic" screen for eternity after flashing PSfreedom. I do have CM 6.0 installed, I believe its from Cyanogenmod 6.0 S/D version, I don't know what ebi I am nor if need to do something with kernel, but I just know I go into recovery, flash PSfreedom enabler, reboot, the "htc magic" logo shows up and then it sits there forever...Is there something I'm doing wrong?
@ repukken, rock187. You should use the 32B port. The link is in the first post.
Lollipop_Lawlipop said:
MT3G is 32B, so head off to the Dream section and get that one instead.
Click to expand...
Click to collapse
its mt3g slide i believe its different though i did use the precompiled for the dream 32b on a g1 yesterday and works very well and with no probs at all still want to see something for the slide. i asked in the slide forums and everyone just had s*** to talk really